pragma solidity 0.4.4;


/// @title Multisignature wallet - Allows multiple parties to agree on transactions before execution.
/// @author Stefan George - <stefan.george@consensys.net>
contract MultiSigWallet {

    uint constant public MAX_OWNER_COUNT = 50;

    event Confirmation(address indexed sender, uint indexed transactionId);
    event Revocation(address indexed sender, uint indexed transactionId);
    event Submission(uint indexed transactionId);
    event Execution(uint indexed transactionId);
    event ExecutionFailure(uint indexed transactionId);
    event Deposit(address indexed sender, uint value);
    event OwnerAddition(address indexed owner);
    event OwnerRemoval(address indexed owner);
    event RequirementChange(uint required);

    mapping (uint => Transaction) public transactions;
    mapping (uint => mapping (address => bool)) public confirmations;
    mapping (address => bool) public isOwner;
    address[] public owners;
    uint public required;
    uint public transactionCount;

    struct Transaction {
        address destination;
        uint value;
        bytes data;
        bool executed;
    }

    modifier onlyWallet() {
        if (msg.sender != address(this))
            throw;
        _;
    }

    modifier ownerDoesNotExist(address owner) {
        if (isOwner[owner])
            throw;
        _;
    }

    modifier ownerExists(address owner) {
        if (!isOwner[owner])
            throw;
        _;
    }

    modifier transactionExists(uint transactionId) {
        if (transactions[transactionId].destination == 0)
            throw;
        _;
    }

    modifier confirmed(uint transactionId, address owner) {
        if (!confirmations[transactionId][owner])
            throw;
        _;
    }

    modifier notConfirmed(uint transactionId, address owner) {
        if (confirmations[transactionId][owner])
            throw;
        _;
    }

    modifier notExecuted(uint transactionId) {
        if (transactions[transactionId].executed)
            throw;
        _;
    }

    modifier notNull(address _address) {
        if (_address == 0)
            throw;
        _;
    }

    modifier validRequirement(uint ownerCount, uint _required) {
        if (   ownerCount > MAX_OWNER_COUNT
            || _required > ownerCount
            || _required == 0
            || ownerCount == 0)
            throw;
        _;
    }

    /// @dev Fallback function allows to deposit ether.
    function()
        payable
    {
        if (msg.value > 0)
            Deposit(msg.sender, msg.value);
    }

    /*
     * Public functions
     */
    /// @dev Contract constructor sets initial owners and required number of confirmations.
    /// @param _owners List of initial owners.
    /// @param _required Number of required confirmations.
    function MultiSigWallet(address[] _owners, uint _required)
        public
        validRequirement(_owners.length, _required)
    {
        for (uint i=0; i<_owners.length; i++) {
            if (isOwner[_owners[i]] || _owners[i] == 0)
                throw;
            isOwner[_owners[i]] = true;
        }
        owners = _owners;
        required = _required;
    }

    /// @dev Allows to add a new owner. Transaction has to be sent by wallet.
    /// @param owner Address of new owner.
    function addOwner(address owner)
        public
        onlyWallet
        ownerDoesNotExist(owner)
        notNull(owner)
        validRequirement(owners.length + 1, required)
    {
        isOwner[owner] = true;
        owners.push(owner);
        OwnerAddition(owner);
    }

    /// @dev Allows to remove an owner. Transaction has to be sent by wallet.
    /// @param owner Address of owner.
    function removeOwner(address owner)
        public
        onlyWallet
        ownerExists(owner)
    {
        isOwner[owner] = false;
        for (uint i=0; i<owners.length - 1; i++)
            if (owners[i] == owner) {
                owners[i] = owners[owners.length - 1];
                break;
            }
        owners.length -= 1;
        if (required > owners.length)
            changeRequirement(owners.length);
        OwnerRemoval(owner);
    }

    /// @dev Allows to replace an owner with a new owner. Transaction has to be sent by wallet.
    /// @param owner Address of owner to be replaced.
    /// @param owner Address of new owner.
    function replaceOwner(address owner, address newOwner)
        public
        onlyWallet
        ownerExists(owner)
        ownerDoesNotExist(newOwner)
    {
        for (uint i=0; i<owners.length; i++)
            if (owners[i] == owner) {
                owners[i] = newOwner;
                break;
            }
        isOwner[owner] = false;
        isOwner[newOwner] = true;
        OwnerRemoval(owner);
        OwnerAddition(newOwner);
    }

    /// @dev Allows to change the number of required confirmations. Transaction has to be sent by wallet.
    /// @param _required Number of required confirmations.
    function changeRequirement(uint _required)
        public
        onlyWallet
        validRequirement(owners.length, _required)
    {
        required = _required;
        RequirementChange(_required);
    }

    /// @dev Allows an owner to submit and confirm a transaction.
    /// @param destination Transaction target address.
    /// @param value Transaction ether value.
    /// @param data Transaction data payload.
    /// @return Returns transaction ID.
    function submitTransaction(address destination, uint value, bytes data)
        public
        returns (uint transactionId)
    {
        transactionId = addTransaction(destination, value, data);
        confirmTransaction(transactionId);
    }

    /// @dev Allows an owner to confirm a transaction.
    /// @param transactionId Transaction ID.
    function confirmTransaction(uint transactionId)
        public
        ownerExists(msg.sender)
        transactionExists(transactionId)
        notConfirmed(transactionId, msg.sender)
    {
        confirmations[transactionId][msg.sender] = true;
        Confirmation(msg.sender, transactionId);
        executeTransaction(transactionId);
    }

    /// @dev Allows an owner to revoke a confirmation for a transaction.
    /// @param transactionId Transaction ID.
    function revokeConfirmation(uint transactionId)
        public
        ownerExists(msg.sender)
        confirmed(transactionId, msg.sender)
        notExecuted(transactionId)
    {
        confirmations[transactionId][msg.sender] = false;
        Revocation(msg.sender, transactionId);
    }

    /// @dev Allows anyone to execute a confirmed transaction.
    /// @param transactionId Transaction ID.
    function executeTransaction(uint transactionId)
        public
        notExecuted(transactionId)
    {
        if (isConfirmed(transactionId)) {
            Transaction tx = transactions[transactionId];
            tx.executed = true;
            if (tx.destination.call.value(tx.value)(tx.data))
                Execution(transactionId);
            else {
                ExecutionFailure(transactionId);
                tx.executed = false;
            }
        }
    }

    /// @dev Returns the confirmation status of a transaction.
    /// @param transactionId Transaction ID.
    /// @return Confirmation status.
    function isConfirmed(uint transactionId)
        public
        constant
        returns (bool)
    {
        uint count = 0;
        for (uint i=0; i<owners.length; i++) {
            if (confirmations[transactionId][owners[i]])
                count += 1;
            if (count == required)
                return true;
        }
    }

    /*
     * Internal functions
     */
    /// @dev Adds a new transaction to the transaction mapping, if transaction does not exist yet.
    /// @param destination Transaction target address.
    /// @param value Transaction ether value.
    /// @param data Transaction data payload.
    /// @return Returns transaction ID.
    function addTransaction(address destination, uint value, bytes data)
        internal
        notNull(destination)
        returns (uint transactionId)
    {
        transactionId = transactionCount;
        transactions[transactionId] = Transaction({
            destination: destination,
            value: value,
            data: data,
            executed: false
        });
        transactionCount += 1;
        Submission(transactionId);
    }

    /*
     * Web3 call functions
     */
    /// @dev Returns number of confirmations of a transaction.
    /// @param transactionId Transaction ID.
    /// @return Number of confirmations.
    function getConfirmationCount(uint transactionId)
        public
        constant
        returns (uint count)
    {
        for (uint i=0; i<owners.length; i++)
            if (confirmations[transactionId][owners[i]])
                count += 1;
    }

    /// @dev Returns total number of transactions after filers are applied.
    /// @param pending Include pending transactions.
    /// @param executed Include executed transactions.
    /// @return Total number of transactions after filters are applied.
    function getTransactionCount(bool pending, bool executed)
        public
        constant
        returns (uint count)
    {
        for (uint i=0; i<transactionCount; i++)
            if (   pending && !transactions[i].executed
                || executed && transactions[i].executed)
                count += 1;
    }

    /// @dev Returns list of owners.
    /// @return List of owner addresses.
    function getOwners()
        public
        constant
        returns (address[])
    {
        return owners;
    }

    /// @dev Returns array with owner addresses, which confirmed transaction.
    /// @param transactionId Transaction ID.
    /// @return Returns array of owner addresses.
    function getConfirmations(uint transactionId)
        public
        constant
        returns (address[] _confirmations)
    {
        address[] memory confirmationsTemp = new address[](owners.length);
        uint count = 0;
        uint i;
        for (i=0; i<owners.length; i++)
            if (confirmations[transactionId][owners[i]]) {
                confirmationsTemp[count] = owners[i];
                count += 1;
            }
        _confirmations = new address[](count);
        for (i=0; i<count; i++)
            _confirmations[i] = confirmationsTemp[i];
    }

    /// @dev Returns list of transaction IDs in defined range.
    /// @param from Index start position of transaction array.
    /// @param to Index end position of transaction array.
    /// @param pending Include pending transactions.
    /// @param executed Include executed transactions.
    /// @return Returns array of transaction IDs.
    function getTransactionIds(uint from, uint to, bool pending, bool executed)
        public
        constant
        returns (uint[] _transactionIds)
    {
        uint[] memory transactionIdsTemp = new uint[](transactionCount);
        uint count = 0;
        uint i;
        for (i=0; i<transactionCount; i++)
            if (   pending && !transactions[i].executed
                || executed && transactions[i].executed)
            {
                transactionIdsTemp[count] = i;
                count += 1;
            }
        _transactionIds = new uint[](to - from);
        for (i=from; i<to; i++)
            _transactionIds[i - from] = transactionIdsTemp[i];
    }
}

/// @title Multisignature wallet with daily limit - Allows an owner to withdraw a daily limit without multisig.
/// @author Stefan George - <stefan.george@consensys.net>
contract MultiSigWalletWithDailyLimit is MultiSigWallet {

    event DailyLimitChange(uint dailyLimit);

    uint public dailyLimit;
    uint public lastDay;
    uint public spentToday;

    /*
     * Public functions
     */
    /// @dev Contract constructor sets initial owners, required number of confirmations and daily withdraw limit.
    /// @param _owners List of initial owners.
    /// @param _required Number of required confirmations.
    /// @param _dailyLimit Amount in wei, which can be withdrawn without confirmations on a daily basis.
    function MultiSigWalletWithDailyLimit(address[] _owners, uint _required, uint _dailyLimit)
        public
        MultiSigWallet(_owners, _required)
    {
        dailyLimit = _dailyLimit;
    }

    /// @dev Allows to change the daily limit. Transaction has to be sent by wallet.
    /// @param _dailyLimit Amount in wei.
    function changeDailyLimit(uint _dailyLimit)
        public
        onlyWallet
    {
        dailyLimit = _dailyLimit;
        DailyLimitChange(_dailyLimit);
    }

    /// @dev Allows anyone to execute a confirmed transaction or ether withdraws until daily limit is reached.
    /// @param transactionId Transaction ID.
    function executeTransaction(uint transactionId)
        public
        notExecuted(transactionId)
    {
        Transaction tx = transactions[transactionId];
        bool confirmed = isConfirmed(transactionId);
        if (confirmed || tx.data.length == 0 && isUnderLimit(tx.value)) {
            tx.executed = true;
            if (!confirmed)
                spentToday += tx.value;
            if (tx.destination.call.value(tx.value)(tx.data))
                Execution(transactionId);
            else {
                ExecutionFailure(transactionId);
                tx.executed = false;
                if (!confirmed)
                    spentToday -= tx.value;
            }
        }
    }

    /*
     * Internal functions
     */
    /// @dev Returns if amount is within daily limit and resets spentToday after one day.
    /// @param amount Amount to withdraw.
    /// @return Returns if amount is under daily limit.
    function isUnderLimit(uint amount)
        internal
        returns (bool)
    {
        if (now > lastDay + 24 hours) {
            lastDay = now;
            spentToday = 0;
        }
        if (spentToday + amount > dailyLimit || spentToday + amount < spentToday)
            return false;
        return true;
    }

    /*
     * Web3 call functions
     */
    /// @dev Returns maximum withdraw amount.
    /// @return Returns amount.
    function calcMaxWithdraw()
        public
        constant
        returns (uint)
    {
        if (now > lastDay + 24 hours)
            return dailyLimit;
        return dailyLimit - spentToday;
    }
}

pragma solidity 0.5.2;

// File: openzeppelin-solidity/contracts/token/ERC20/IERC20.sol

/**
 * @title ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/20
 */
interface IERC20 {
    function transfer(address to, uint256 value) external returns (bool);

    function approve(address spender, uint256 value) external returns (bool);

    function transferFrom(address from, address to, uint256 value) external returns (bool);

    function totalSupply() external view returns (uint256);

    function balanceOf(address who) external view returns (uint256);

    function allowance(address owner, address spender) external view returns (uint256);

    event Transfer(address indexed from, address indexed to, uint256 value);

    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: openzeppelin-solidity/contracts/math/SafeMath.sol

/**
 * @title SafeMath
 * @dev Unsigned math operations with safety checks that revert on error
 */
library SafeMath {
    /**
    * @dev Multiplies two unsigned integers, reverts on overflow.
    */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b);

        return c;
    }

    /**
    * @dev Integer division of two unsigned integers truncating the quotient, reverts on division by zero.
    */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
    * @dev Subtracts two unsigned integers, reverts on overflow (i.e. if subtrahend is greater than minuend).
    */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a);
        uint256 c = a - b;

        return c;
    }

    /**
    * @dev Adds two unsigned integers, reverts on overflow.
    */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a);

        return c;
    }

    /**
    * @dev Divides two unsigned integers and returns the remainder (unsigned integer modulo),
    * reverts when dividing by zero.
    */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b != 0);
        return a % b;
    }
}

// File: openzeppelin-solidity/contracts/token/ERC20/ERC20.sol

/**
 * @title Standard ERC20 token
 *
 * @dev Implementation of the basic standard token.
 * https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20.md
 * Originally based on code by FirstBlood:
 * https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
 *
 * This implementation emits additional Approval events, allowing applications to reconstruct the allowance status for
 * all accounts just by listening to said events. Note that this isn't required by the specification, and other
 * compliant implementations may not do it.
 */
contract ERC20 is IERC20 {
    using SafeMath for uint256;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowed;

    uint256 private _totalSupply;

    /**
    * @dev Total number of tokens in existence
    */
    function totalSupply() public view returns (uint256) {
        return _totalSupply;
    }

    /**
    * @dev Gets the balance of the specified address.
    * @param owner The address to query the balance of.
    * @return An uint256 representing the amount owned by the passed address.
    */
    function balanceOf(address owner) public view returns (uint256) {
        return _balances[owner];
    }

    /**
     * @dev Function to check the amount of tokens that an owner allowed to a spender.
     * @param owner address The address which owns the funds.
     * @param spender address The address which will spend the funds.
     * @return A uint256 specifying the amount of tokens still available for the spender.
     */
    function allowance(address owner, address spender) public view returns (uint256) {
        return _allowed[owner][spender];
    }

    /**
    * @dev Transfer token for a specified address
    * @param to The address to transfer to.
    * @param value The amount to be transferred.
    */
    function transfer(address to, uint256 value) public returns (bool) {
        _transfer(msg.sender, to, value);
        return true;
    }

    /**
     * @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
     * Beware that changing an allowance with this method brings the risk that someone may use both the old
     * and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
     * race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to be spent.
     */
    function approve(address spender, uint256 value) public returns (bool) {
        require(spender != address(0));

        _allowed[msg.sender][spender] = value;
        emit Approval(msg.sender, spender, value);
        return true;
    }

    /**
     * @dev Transfer tokens from one address to another.
     * Note that while this function emits an Approval event, this is not required as per the specification,
     * and other compliant implementations may not emit the event.
     * @param from address The address which you want to send tokens from
     * @param to address The address which you want to transfer to
     * @param value uint256 the amount of tokens to be transferred
     */
    function transferFrom(address from, address to, uint256 value) public returns (bool) {
        _allowed[from][msg.sender] = _allowed[from][msg.sender].sub(value);
        _transfer(from, to, value);
        emit Approval(from, msg.sender, _allowed[from][msg.sender]);
        return true;
    }

    /**
     * @dev Increase the amount of tokens that an owner allowed to a spender.
     * approve should be called when allowed_[_spender] == 0. To increment
     * allowed value is better to use this function to avoid 2 calls (and wait until
     * the first transaction is mined)
     * From MonolithDAO Token.sol
     * Emits an Approval event.
     * @param spender The address which will spend the funds.
     * @param addedValue The amount of tokens to increase the allowance by.
     */
    function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
        require(spender != address(0));

        _allowed[msg.sender][spender] = _allowed[msg.sender][spender].add(addedValue);
        emit Approval(msg.sender, spender, _allowed[msg.sender][spender]);
        return true;
    }

    /**
     * @dev Decrease the amount of tokens that an owner allowed to a spender.
     * approve should be called when allowed_[_spender] == 0. To decrement
     * allowed value is better to use this function to avoid 2 calls (and wait until
     * the first transaction is mined)
     * From MonolithDAO Token.sol
     * Emits an Approval event.
     * @param spender The address which will spend the funds.
     * @param subtractedValue The amount of tokens to decrease the allowance by.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
        require(spender != address(0));

        _allowed[msg.sender][spender] = _allowed[msg.sender][spender].sub(subtractedValue);
        emit Approval(msg.sender, spender, _allowed[msg.sender][spender]);
        return true;
    }

    /**
    * @dev Transfer token for a specified addresses
    * @param from The address to transfer from.
    * @param to The address to transfer to.
    * @param value The amount to be transferred.
    */
    function _transfer(address from, address to, uint256 value) internal {
        require(to != address(0));

        _balances[from] = _balances[from].sub(value);
        _balances[to] = _balances[to].add(value);
        emit Transfer(from, to, value);
    }

    /**
     * @dev Internal function that mints an amount of the token and assigns it to
     * an account. This encapsulates the modification of balances such that the
     * proper events are emitted.
     * @param account The account that will receive the created tokens.
     * @param value The amount that will be created.
     */
    function _mint(address account, uint256 value) internal {
        require(account != address(0));

        _totalSupply = _totalSupply.add(value);
        _balances[account] = _balances[account].add(value);
        emit Transfer(address(0), account, value);
    }

    /**
     * @dev Internal function that burns an amount of the token of a given
     * account.
     * @param account The account whose tokens will be burnt.
     * @param value The amount that will be burnt.
     */
    function _burn(address account, uint256 value) internal {
        require(account != address(0));

        _totalSupply = _totalSupply.sub(value);
        _balances[account] = _balances[account].sub(value);
        emit Transfer(account, address(0), value);
    }

    /**
     * @dev Internal function that burns an amount of the token of a given
     * account, deducting from the sender's allowance for said account. Uses the
     * internal burn function.
     * Emits an Approval event (reflecting the reduced allowance).
     * @param account The account whose tokens will be burnt.
     * @param value The amount that will be burnt.
     */
    function _burnFrom(address account, uint256 value) internal {
        _allowed[account][msg.sender] = _allowed[account][msg.sender].sub(value);
        _burn(account, value);
        emit Approval(account, msg.sender, _allowed[account][msg.sender]);
    }
}

// File: openzeppelin-solidity/contracts/access/Roles.sol

/**
 * @title Roles
 * @dev Library for managing addresses assigned to a Role.
 */
library Roles {
    struct Role {
        mapping (address => bool) bearer;
    }

    /**
     * @dev give an account access to this role
     */
    function add(Role storage role, address account) internal {
        require(account != address(0));
        require(!has(role, account));

        role.bearer[account] = true;
    }

    /**
     * @dev remove an account's access to this role
     */
    function remove(Role storage role, address account) internal {
        require(account != address(0));
        require(has(role, account));

        role.bearer[account] = false;
    }

    /**
     * @dev check if an account has this role
     * @return bool
     */
    function has(Role storage role, address account) internal view returns (bool) {
        require(account != address(0));
        return role.bearer[account];
    }
}

// File: openzeppelin-solidity/contracts/access/roles/PauserRole.sol

contract PauserRole {
    using Roles for Roles.Role;

    event PauserAdded(address indexed account);
    event PauserRemoved(address indexed account);

    Roles.Role private _pausers;

    constructor () internal {
        _addPauser(msg.sender);
    }

    modifier onlyPauser() {
        require(isPauser(msg.sender));
        _;
    }

    function isPauser(address account) public view returns (bool) {
        return _pausers.has(account);
    }

    function addPauser(address account) public onlyPauser {
        _addPauser(account);
    }

    function renouncePauser() public {
        _removePauser(msg.sender);
    }

    function _addPauser(address account) internal {
        _pausers.add(account);
        emit PauserAdded(account);
    }

    function _removePauser(address account) internal {
        _pausers.remove(account);
        emit PauserRemoved(account);
    }
}

// File: openzeppelin-solidity/contracts/lifecycle/Pausable.sol

/**
 * @title Pausable
 * @dev Base contract which allows children to implement an emergency stop mechanism.
 */
contract Pausable is PauserRole {
    event Paused(address account);
    event Unpaused(address account);

    bool private _paused;

    constructor () internal {
        _paused = false;
    }

    /**
     * @return true if the contract is paused, false otherwise.
     */
    function paused() public view returns (bool) {
        return _paused;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     */
    modifier whenNotPaused() {
        require(!_paused);
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     */
    modifier whenPaused() {
        require(_paused);
        _;
    }

    /**
     * @dev called by the owner to pause, triggers stopped state
     */
    function pause() public onlyPauser whenNotPaused {
        _paused = true;
        emit Paused(msg.sender);
    }

    /**
     * @dev called by the owner to unpause, returns to normal state
     */
    function unpause() public onlyPauser whenPaused {
        _paused = false;
        emit Unpaused(msg.sender);
    }
}

// File: openzeppelin-solidity/contracts/token/ERC20/ERC20Pausable.sol

/**
 * @title Pausable token
 * @dev ERC20 modified with pausable transfers.
 **/
contract ERC20Pausable is ERC20, Pausable {
    function transfer(address to, uint256 value) public whenNotPaused returns (bool) {
        return super.transfer(to, value);
    }

    function transferFrom(address from, address to, uint256 value) public whenNotPaused returns (bool) {
        return super.transferFrom(from, to, value);
    }

    function approve(address spender, uint256 value) public whenNotPaused returns (bool) {
        return super.approve(spender, value);
    }

    function increaseAllowance(address spender, uint addedValue) public whenNotPaused returns (bool success) {
        return super.increaseAllowance(spender, addedValue);
    }

    function decreaseAllowance(address spender, uint subtractedValue) public whenNotPaused returns (bool success) {
        return super.decreaseAllowance(spender, subtractedValue);
    }
}

// File: openzeppelin-solidity/contracts/token/ERC20/ERC20Detailed.sol

/**
 * @title ERC20Detailed token
 * @dev The decimals are only for visualization purposes.
 * All the operations are done using the smallest and indivisible token unit,
 * just as on Ethereum all the operations are done in wei.
 */
contract ERC20Detailed is IERC20 {
    string private _name;
    string private _symbol;
    uint8 private _decimals;

    constructor (string memory name, string memory symbol, uint8 decimals) public {
        _name = name;
        _symbol = symbol;
        _decimals = decimals;
    }

    /**
     * @return the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @return the symbol of the token.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @return the number of decimals of the token.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }
}

// File: contracts/MaticToken.sol

contract MaticToken is ERC20Pausable, ERC20Detailed {
    constructor (string memory name, string memory symbol, uint8 decimals, uint256 totalSupply)
    public
    ERC20Detailed (name, symbol, decimals) {
        _mint(msg.sender, totalSupply);
    }
}