// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (interfaces/draft-IERC1822.sol)
pragma solidity ^0.8.0;
/**
 * @dev ERC1822: Universal Upgradeable Proxy Standard (UUPS) documents a method for upgradeability through a simplified
 * proxy whose upgrades are fully controlled by the current implementation.
 */
interface IERC1822Proxiable {
    /**
     * @dev Returns the storage slot that the proxiable contract assumes is being used to store the implementation
     * address.
     *
     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks
     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this
     * function revert if invoked through a proxy.
     */
    function proxiableUUID() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.3) (interfaces/IERC1967.sol)
pragma solidity ^0.8.0;
/**
 * @dev ERC-1967: Proxy Storage Slots. This interface contains the events defined in the ERC.
 *
 * _Available since v4.9._
 */
interface IERC1967 {
    /**
     * @dev Emitted when the implementation is upgraded.
     */
    event Upgraded(address indexed implementation);
    /**
     * @dev Emitted when the admin account has changed.
     */
    event AdminChanged(address previousAdmin, address newAdmin);
    /**
     * @dev Emitted when the beacon is changed.
     */
    event BeaconUpgraded(address indexed beacon);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (proxy/beacon/BeaconProxy.sol)
pragma solidity ^0.8.0;
import "./IBeacon.sol";
import "../Proxy.sol";
import "../ERC1967/ERC1967Upgrade.sol";
/**
 * @dev This contract implements a proxy that gets the implementation address for each call from an {UpgradeableBeacon}.
 *
 * The beacon address is stored in storage slot `uint256(keccak256('eip1967.proxy.beacon')) - 1`, so that it doesn't
 * conflict with the storage layout of the implementation behind the proxy.
 *
 * _Available since v3.4._
 */
contract BeaconProxy is Proxy, ERC1967Upgrade {
    /**
     * @dev Initializes the proxy with `beacon`.
     *
     * If `data` is nonempty, it's used as data in a delegate call to the implementation returned by the beacon. This
     * will typically be an encoded function call, and allows initializing the storage of the proxy like a Solidity
     * constructor.
     *
     * Requirements:
     *
     * - `beacon` must be a contract with the interface {IBeacon}.
     */
    constructor(address beacon, bytes memory data) payable {
        _upgradeBeaconToAndCall(beacon, data, false);
    }
    /**
     * @dev Returns the current beacon address.
     */
    function _beacon() internal view virtual returns (address) {
        return _getBeacon();
    }
    /**
     * @dev Returns the current implementation address of the associated beacon.
     */
    function _implementation() internal view virtual override returns (address) {
        return IBeacon(_getBeacon()).implementation();
    }
    /**
     * @dev Changes the proxy to use a new beacon. Deprecated: see {_upgradeBeaconToAndCall}.
     *
     * If `data` is nonempty, it's used as data in a delegate call to the implementation returned by the beacon.
     *
     * Requirements:
     *
     * - `beacon` must be a contract.
     * - The implementation returned by `beacon` must be a contract.
     */
    function _setBeacon(address beacon, bytes memory data) internal virtual {
        _upgradeBeaconToAndCall(beacon, data, false);
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/beacon/IBeacon.sol)
pragma solidity ^0.8.0;
/**
 * @dev This is the interface that {BeaconProxy} expects of its beacon.
 */
interface IBeacon {
    /**
     * @dev Must return an address that can be used as a delegate call target.
     *
     * {BeaconProxy} will check that this address is a contract.
     */
    function implementation() external view returns (address);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/beacon/UpgradeableBeacon.sol)
pragma solidity ^0.8.0;
import "./IBeacon.sol";
import "../../access/Ownable.sol";
import "../../utils/Address.sol";
/**
 * @dev This contract is used in conjunction with one or more instances of {BeaconProxy} to determine their
 * implementation contract, which is where they will delegate all function calls.
 *
 * An owner is able to change the implementation the beacon points to, thus upgrading the proxies that use this beacon.
 */
contract UpgradeableBeacon is IBeacon, Ownable {
    address private _implementation;
    /**
     * @dev Emitted when the implementation returned by the beacon is changed.
     */
    event Upgraded(address indexed implementation);
    /**
     * @dev Sets the address of the initial implementation, and the deployer account as the owner who can upgrade the
     * beacon.
     */
    constructor(address implementation_) {
        _setImplementation(implementation_);
    }
    /**
     * @dev Returns the current implementation address.
     */
    function implementation() public view virtual override returns (address) {
        return _implementation;
    }
    /**
     * @dev Upgrades the beacon to a new implementation.
     *
     * Emits an {Upgraded} event.
     *
     * Requirements:
     *
     * - msg.sender must be the owner of the contract.
     * - `newImplementation` must be a contract.
     */
    function upgradeTo(address newImplementation) public virtual onlyOwner {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
    }
    /**
     * @dev Sets the implementation contract address for this beacon
     *
     * Requirements:
     *
     * - `newImplementation` must be a contract.
     */
    function _setImplementation(address newImplementation) private {
        require(Address.isContract(newImplementation), "UpgradeableBeacon: implementation is not a contract");
        _implementation = newImplementation;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (proxy/ERC1967/ERC1967Proxy.sol)
pragma solidity ^0.8.0;
import "../Proxy.sol";
import "./ERC1967Upgrade.sol";
/**
 * @dev This contract implements an upgradeable proxy. It is upgradeable because calls are delegated to an
 * implementation address that can be changed. This address is stored in storage in the location specified by
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967], so that it doesn't conflict with the storage layout of the
 * implementation behind the proxy.
 */
contract ERC1967Proxy is Proxy, ERC1967Upgrade {
    /**
     * @dev Initializes the upgradeable proxy with an initial implementation specified by `_logic`.
     *
     * If `_data` is nonempty, it's used as data in a delegate call to `_logic`. This will typically be an encoded
     * function call, and allows initializing the storage of the proxy like a Solidity constructor.
     */
    constructor(address _logic, bytes memory _data) payable {
        _upgradeToAndCall(_logic, _data, false);
    }
    /**
     * @dev Returns the current implementation address.
     */
    function _implementation() internal view virtual override returns (address impl) {
        return ERC1967Upgrade._getImplementation();
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.3) (proxy/ERC1967/ERC1967Upgrade.sol)
pragma solidity ^0.8.2;
import "../beacon/IBeacon.sol";
import "../../interfaces/IERC1967.sol";
import "../../interfaces/draft-IERC1822.sol";
import "../../utils/Address.sol";
import "../../utils/StorageSlot.sol";
/**
 * @dev This abstract contract provides getters and event emitting update functions for
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967] slots.
 *
 * _Available since v4.1._
 *
 * @custom:oz-upgrades-unsafe-allow delegatecall
 */
abstract contract ERC1967Upgrade is IERC1967 {
    // This is the keccak-256 hash of "eip1967.proxy.rollback" subtracted by 1
    bytes32 private constant _ROLLBACK_SLOT = 0x4910fdfa16fed3260ed0e7147f7cc6da11a60208b5b9406d12a635614ffd9143;
    /**
     * @dev Storage slot with the address of the current implementation.
     * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
    /**
     * @dev Returns the current implementation address.
     */
    function _getImplementation() internal view returns (address) {
        return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
    }
    /**
     * @dev Stores a new address in the EIP1967 implementation slot.
     */
    function _setImplementation(address newImplementation) private {
        require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
        StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
    }
    /**
     * @dev Perform implementation upgrade
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeTo(address newImplementation) internal {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
    }
    /**
     * @dev Perform implementation upgrade with additional setup call.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeToAndCall(
        address newImplementation,
        bytes memory data,
        bool forceCall
    ) internal {
        _upgradeTo(newImplementation);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(newImplementation, data);
        }
    }
    /**
     * @dev Perform implementation upgrade with security checks for UUPS proxies, and additional setup call.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeToAndCallUUPS(
        address newImplementation,
        bytes memory data,
        bool forceCall
    ) internal {
        // Upgrades from old implementations will perform a rollback test. This test requires the new
        // implementation to upgrade back to the old, non-ERC1822 compliant, implementation. Removing
        // this special case will break upgrade paths from old UUPS implementation to new ones.
        if (StorageSlot.getBooleanSlot(_ROLLBACK_SLOT).value) {
            _setImplementation(newImplementation);
        } else {
            try IERC1822Proxiable(newImplementation).proxiableUUID() returns (bytes32 slot) {
                require(slot == _IMPLEMENTATION_SLOT, "ERC1967Upgrade: unsupported proxiableUUID");
            } catch {
                revert("ERC1967Upgrade: new implementation is not UUPS");
            }
            _upgradeToAndCall(newImplementation, data, forceCall);
        }
    }
    /**
     * @dev Storage slot with the admin of the contract.
     * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 internal constant _ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
    /**
     * @dev Returns the current admin.
     */
    function _getAdmin() internal view returns (address) {
        return StorageSlot.getAddressSlot(_ADMIN_SLOT).value;
    }
    /**
     * @dev Stores a new address in the EIP1967 admin slot.
     */
    function _setAdmin(address newAdmin) private {
        require(newAdmin != address(0), "ERC1967: new admin is the zero address");
        StorageSlot.getAddressSlot(_ADMIN_SLOT).value = newAdmin;
    }
    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {AdminChanged} event.
     */
    function _changeAdmin(address newAdmin) internal {
        emit AdminChanged(_getAdmin(), newAdmin);
        _setAdmin(newAdmin);
    }
    /**
     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.
     * This is bytes32(uint256(keccak256('eip1967.proxy.beacon')) - 1)) and is validated in the constructor.
     */
    bytes32 internal constant _BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;
    /**
     * @dev Returns the current beacon.
     */
    function _getBeacon() internal view returns (address) {
        return StorageSlot.getAddressSlot(_BEACON_SLOT).value;
    }
    /**
     * @dev Stores a new beacon in the EIP1967 beacon slot.
     */
    function _setBeacon(address newBeacon) private {
        require(Address.isContract(newBeacon), "ERC1967: new beacon is not a contract");
        require(
            Address.isContract(IBeacon(newBeacon).implementation()),
            "ERC1967: beacon implementation is not a contract"
        );
        StorageSlot.getAddressSlot(_BEACON_SLOT).value = newBeacon;
    }
    /**
     * @dev Perform beacon upgrade with additional setup call. Note: This upgrades the address of the beacon, it does
     * not upgrade the implementation contained in the beacon (see {UpgradeableBeacon-_setImplementation} for that).
     *
     * Emits a {BeaconUpgraded} event.
     */
    function _upgradeBeaconToAndCall(
        address newBeacon,
        bytes memory data,
        bool forceCall
    ) internal {
        _setBeacon(newBeacon);
        emit BeaconUpgraded(newBeacon);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
 * @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
 * instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
 * be specified by overriding the virtual {_implementation} function.
 *
 * Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
 * different contract through the {_delegate} function.
 *
 * The success and return data of the delegated call will be returned back to the caller of the proxy.
 */
abstract contract Proxy {
    /**
     * @dev Delegates the current call to `implementation`.
     *
     * This function does not return to its internal call site, it will return directly to the external caller.
     */
    function _delegate(address implementation) internal virtual {
        assembly {
            // Copy msg.data. We take full control of memory in this inline assembly
            // block because it will not return to Solidity code. We overwrite the
            // Solidity scratch pad at memory position 0.
            calldatacopy(0, 0, calldatasize())
            // Call the implementation.
            // out and outsize are 0 because we don't know the size yet.
            let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
            // Copy the returned data.
            returndatacopy(0, 0, returndatasize())
            switch result
            // delegatecall returns 0 on error.
            case 0 {
                revert(0, returndatasize())
            }
            default {
                return(0, returndatasize())
            }
        }
    }
    /**
     * @dev This is a virtual function that should be overridden so it returns the address to which the fallback function
     * and {_fallback} should delegate.
     */
    function _implementation() internal view virtual returns (address);
    /**
     * @dev Delegates the current call to the address returned by `_implementation()`.
     *
     * This function does not return to its internal call site, it will return directly to the external caller.
     */
    function _fallback() internal virtual {
        _beforeFallback();
        _delegate(_implementation());
    }
    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
     * function in the contract matches the call data.
     */
    fallback() external payable virtual {
        _fallback();
    }
    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
     * is empty.
     */
    receive() external payable virtual {
        _fallback();
    }
    /**
     * @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
     * call, or as part of the Solidity `fallback` or `receive` functions.
     *
     * If overridden should call `super._beforeFallback()`.
     */
    function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.3) (proxy/transparent/ProxyAdmin.sol)
pragma solidity ^0.8.0;
import "./TransparentUpgradeableProxy.sol";
import "../../access/Ownable.sol";
/**
 * @dev This is an auxiliary contract meant to be assigned as the admin of a {TransparentUpgradeableProxy}. For an
 * explanation of why you would want to use this see the documentation for {TransparentUpgradeableProxy}.
 */
contract ProxyAdmin is Ownable {
    /**
     * @dev Returns the current implementation of `proxy`.
     *
     * Requirements:
     *
     * - This contract must be the admin of `proxy`.
     */
    function getProxyImplementation(ITransparentUpgradeableProxy proxy) public view virtual returns (address) {
        // We need to manually run the static call since the getter cannot be flagged as view
        // bytes4(keccak256("implementation()")) == 0x5c60da1b
        (bool success, bytes memory returndata) = address(proxy).staticcall(hex"5c60da1b");
        require(success);
        return abi.decode(returndata, (address));
    }
    /**
     * @dev Returns the current admin of `proxy`.
     *
     * Requirements:
     *
     * - This contract must be the admin of `proxy`.
     */
    function getProxyAdmin(ITransparentUpgradeableProxy proxy) public view virtual returns (address) {
        // We need to manually run the static call since the getter cannot be flagged as view
        // bytes4(keccak256("admin()")) == 0xf851a440
        (bool success, bytes memory returndata) = address(proxy).staticcall(hex"f851a440");
        require(success);
        return abi.decode(returndata, (address));
    }
    /**
     * @dev Changes the admin of `proxy` to `newAdmin`.
     *
     * Requirements:
     *
     * - This contract must be the current admin of `proxy`.
     */
    function changeProxyAdmin(ITransparentUpgradeableProxy proxy, address newAdmin) public virtual onlyOwner {
        proxy.changeAdmin(newAdmin);
    }
    /**
     * @dev Upgrades `proxy` to `implementation`. See {TransparentUpgradeableProxy-upgradeTo}.
     *
     * Requirements:
     *
     * - This contract must be the admin of `proxy`.
     */
    function upgrade(ITransparentUpgradeableProxy proxy, address implementation) public virtual onlyOwner {
        proxy.upgradeTo(implementation);
    }
    /**
     * @dev Upgrades `proxy` to `implementation` and calls a function on the new implementation. See
     * {TransparentUpgradeableProxy-upgradeToAndCall}.
     *
     * Requirements:
     *
     * - This contract must be the admin of `proxy`.
     */
    function upgradeAndCall(
        ITransparentUpgradeableProxy proxy,
        address implementation,
        bytes memory data
    ) public payable virtual onlyOwner {
        proxy.upgradeToAndCall{value: msg.value}(implementation, data);
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.3) (proxy/transparent/TransparentUpgradeableProxy.sol)
pragma solidity ^0.8.0;
import "../ERC1967/ERC1967Proxy.sol";
/**
 * @dev Interface for {TransparentUpgradeableProxy}. In order to implement transparency, {TransparentUpgradeableProxy}
 * does not implement this interface directly, and some of its functions are implemented by an internal dispatch
 * mechanism. The compiler is unaware that these functions are implemented by {TransparentUpgradeableProxy} and will not
 * include them in the ABI so this interface must be used to interact with it.
 */
interface ITransparentUpgradeableProxy is IERC1967 {
    function admin() external view returns (address);
    function implementation() external view returns (address);
    function changeAdmin(address) external;
    function upgradeTo(address) external;
    function upgradeToAndCall(address, bytes memory) external payable;
}
/**
 * @dev This contract implements a proxy that is upgradeable by an admin.
 *
 * To avoid https://medium.com/nomic-labs-blog/malicious-backdoors-in-ethereum-proxies-62629adf3357[proxy selector
 * clashing], which can potentially be used in an attack, this contract uses the
 * https://blog.openzeppelin.com/the-transparent-proxy-pattern/[transparent proxy pattern]. This pattern implies two
 * things that go hand in hand:
 *
 * 1. If any account other than the admin calls the proxy, the call will be forwarded to the implementation, even if
 * that call matches one of the admin functions exposed by the proxy itself.
 * 2. If the admin calls the proxy, it can access the admin functions, but its calls will never be forwarded to the
 * implementation. If the admin tries to call a function on the implementation it will fail with an error that says
 * "admin cannot fallback to proxy target".
 *
 * These properties mean that the admin account can only be used for admin actions like upgrading the proxy or changing
 * the admin, so it's best if it's a dedicated account that is not used for anything else. This will avoid headaches due
 * to sudden errors when trying to call a function from the proxy implementation.
 *
 * Our recommendation is for the dedicated account to be an instance of the {ProxyAdmin} contract. If set up this way,
 * you should think of the `ProxyAdmin` instance as the real administrative interface of your proxy.
 *
 * NOTE: The real interface of this proxy is that defined in `ITransparentUpgradeableProxy`. This contract does not
 * inherit from that interface, and instead the admin functions are implicitly implemented using a custom dispatch
 * mechanism in `_fallback`. Consequently, the compiler will not produce an ABI for this contract. This is necessary to
 * fully implement transparency without decoding reverts caused by selector clashes between the proxy and the
 * implementation.
 *
 * WARNING: It is not recommended to extend this contract to add additional external functions. If you do so, the compiler
 * will not check that there are no selector conflicts, due to the note above. A selector clash between any new function
 * and the functions declared in {ITransparentUpgradeableProxy} will be resolved in favor of the new one. This could
 * render the admin operations inaccessible, which could prevent upgradeability. Transparency may also be compromised.
 */
contract TransparentUpgradeableProxy is ERC1967Proxy {
    /**
     * @dev Initializes an upgradeable proxy managed by `_admin`, backed by the implementation at `_logic`, and
     * optionally initialized with `_data` as explained in {ERC1967Proxy-constructor}.
     */
    constructor(
        address _logic,
        address admin_,
        bytes memory _data
    ) payable ERC1967Proxy(_logic, _data) {
        _changeAdmin(admin_);
    }
    /**
     * @dev Modifier used internally that will delegate the call to the implementation unless the sender is the admin.
     *
     * CAUTION: This modifier is deprecated, as it could cause issues if the modified function has arguments, and the
     * implementation provides a function with the same selector.
     */
    modifier ifAdmin() {
        if (msg.sender == _getAdmin()) {
            _;
        } else {
            _fallback();
        }
    }
    /**
     * @dev If caller is the admin process the call internally, otherwise transparently fallback to the proxy behavior
     */
    function _fallback() internal virtual override {
        if (msg.sender == _getAdmin()) {
            bytes memory ret;
            bytes4 selector = msg.sig;
            if (selector == ITransparentUpgradeableProxy.upgradeTo.selector) {
                ret = _dispatchUpgradeTo();
            } else if (selector == ITransparentUpgradeableProxy.upgradeToAndCall.selector) {
                ret = _dispatchUpgradeToAndCall();
            } else if (selector == ITransparentUpgradeableProxy.changeAdmin.selector) {
                ret = _dispatchChangeAdmin();
            } else if (selector == ITransparentUpgradeableProxy.admin.selector) {
                ret = _dispatchAdmin();
            } else if (selector == ITransparentUpgradeableProxy.implementation.selector) {
                ret = _dispatchImplementation();
            } else {
                revert("TransparentUpgradeableProxy: admin cannot fallback to proxy target");
            }
            assembly {
                return(add(ret, 0x20), mload(ret))
            }
        } else {
            super._fallback();
        }
    }
    /**
     * @dev Returns the current admin.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`
     */
    function _dispatchAdmin() private returns (bytes memory) {
        _requireZeroValue();
        address admin = _getAdmin();
        return abi.encode(admin);
    }
    /**
     * @dev Returns the current implementation.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc`
     */
    function _dispatchImplementation() private returns (bytes memory) {
        _requireZeroValue();
        address implementation = _implementation();
        return abi.encode(implementation);
    }
    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {AdminChanged} event.
     */
    function _dispatchChangeAdmin() private returns (bytes memory) {
        _requireZeroValue();
        address newAdmin = abi.decode(msg.data[4:], (address));
        _changeAdmin(newAdmin);
        return "";
    }
    /**
     * @dev Upgrade the implementation of the proxy.
     */
    function _dispatchUpgradeTo() private returns (bytes memory) {
        _requireZeroValue();
        address newImplementation = abi.decode(msg.data[4:], (address));
        _upgradeToAndCall(newImplementation, bytes(""), false);
        return "";
    }
    /**
     * @dev Upgrade the implementation of the proxy, and then call a function from the new implementation as specified
     * by `data`, which should be an encoded function call. This is useful to initialize new storage variables in the
     * proxied contract.
     */
    function _dispatchUpgradeToAndCall() private returns (bytes memory) {
        (address newImplementation, bytes memory data) = abi.decode(msg.data[4:], (address, bytes));
        _upgradeToAndCall(newImplementation, data, true);
        return "";
    }
    /**
     * @dev Returns the current admin.
     */
    function _admin() internal view virtual returns (address) {
        return _getAdmin();
    }
    /**
     * @dev To keep this contract fully transparent, all `ifAdmin` functions must be payable. This helper is here to
     * emulate some proxy functions being non-payable while still allowing value to pass through.
     */
    function _requireZeroValue() private {
        require(msg.value == 0);
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.
        return account.code.length > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }
    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }
    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 *
 * _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }
    struct BooleanSlot {
        bool value;
    }
    struct Bytes32Slot {
        bytes32 value;
    }
    struct Uint256Slot {
        uint256 value;
    }
    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
}

pragma solidity ^0.4.24;

// File: zos-lib/contracts/upgradeability/Proxy.sol

/**
 * @title Proxy
 * @dev Implements delegation of calls to other contracts, with proper
 * forwarding of return values and bubbling of failures.
 * It defines a fallback function that delegates all calls to the address
 * returned by the abstract _implementation() internal function.
 */
contract Proxy {
  /**
   * @dev Fallback function.
   * Implemented entirely in `_fallback`.
   */
  function () payable external {
    _fallback();
  }

  /**
   * @return The Address of the implementation.
   */
  function _implementation() internal view returns (address);

  /**
   * @dev Delegates execution to an implementation contract.
   * This is a low level function that doesn't return to its internal call site.
   * It will return to the external caller whatever the implementation returns.
   * @param implementation Address to delegate.
   */
  function _delegate(address implementation) internal {
    assembly {
      // Copy msg.data. We take full control of memory in this inline assembly
      // block because it will not return to Solidity code. We overwrite the
      // Solidity scratch pad at memory position 0.
      calldatacopy(0, 0, calldatasize)

      // Call the implementation.
      // out and outsize are 0 because we don't know the size yet.
      let result := delegatecall(gas, implementation, 0, calldatasize, 0, 0)

      // Copy the returned data.
      returndatacopy(0, 0, returndatasize)

      switch result
      // delegatecall returns 0 on error.
      case 0 { revert(0, returndatasize) }
      default { return(0, returndatasize) }
    }
  }

  /**
   * @dev Function that is run as the first thing in the fallback function.
   * Can be redefined in derived contracts to add functionality.
   * Redefinitions must call super._willFallback().
   */
  function _willFallback() internal {
  }

  /**
   * @dev fallback implementation.
   * Extracted to enable manual triggering.
   */
  function _fallback() internal {
    _willFallback();
    _delegate(_implementation());
  }
}

// File: openzeppelin-solidity/contracts/AddressUtils.sol

/**
 * Utility library of inline functions on addresses
 */
library AddressUtils {

  /**
   * Returns whether the target address is a contract
   * @dev This function will return false if invoked during the constructor of a contract,
   * as the code is not actually created until after the constructor finishes.
   * @param addr address to check
   * @return whether the target address is a contract
   */
  function isContract(address addr) internal view returns (bool) {
    uint256 size;
    // XXX Currently there is no better way to check if there is a contract in an address
    // than to check the size of the code at that address.
    // See https://ethereum.stackexchange.com/a/14016/36603
    // for more details about how this works.
    // TODO Check this again before the Serenity release, because all addresses will be
    // contracts then.
    // solium-disable-next-line security/no-inline-assembly
    assembly { size := extcodesize(addr) }
    return size > 0;
  }

}

// File: zos-lib/contracts/upgradeability/UpgradeabilityProxy.sol

/**
 * @title UpgradeabilityProxy
 * @dev This contract implements a proxy that allows to change the
 * implementation address to which it will delegate.
 * Such a change is called an implementation upgrade.
 */
contract UpgradeabilityProxy is Proxy {
  /**
   * @dev Emitted when the implementation is upgraded.
   * @param implementation Address of the new implementation.
   */
  event Upgraded(address implementation);

  /**
   * @dev Storage slot with the address of the current implementation.
   * This is the keccak-256 hash of "org.zeppelinos.proxy.implementation", and is
   * validated in the constructor.
   */
  bytes32 private constant IMPLEMENTATION_SLOT = 0x7050c9e0f4ca769c69bd3a8ef740bc37934f8e2c036e5a723fd8ee048ed3f8c3;

  /**
   * @dev Contract constructor.
   * @param _implementation Address of the initial implementation.
   */
  constructor(address _implementation) public {
    assert(IMPLEMENTATION_SLOT == keccak256("org.zeppelinos.proxy.implementation"));

    _setImplementation(_implementation);
  }

  /**
   * @dev Returns the current implementation.
   * @return Address of the current implementation
   */
  function _implementation() internal view returns (address impl) {
    bytes32 slot = IMPLEMENTATION_SLOT;
    assembly {
      impl := sload(slot)
    }
  }

  /**
   * @dev Upgrades the proxy to a new implementation.
   * @param newImplementation Address of the new implementation.
   */
  function _upgradeTo(address newImplementation) internal {
    _setImplementation(newImplementation);
    emit Upgraded(newImplementation);
  }

  /**
   * @dev Sets the implementation address of the proxy.
   * @param newImplementation Address of the new implementation.
   */
  function _setImplementation(address newImplementation) private {
    require(AddressUtils.isContract(newImplementation), "Cannot set a proxy implementation to a non-contract address");

    bytes32 slot = IMPLEMENTATION_SLOT;

    assembly {
      sstore(slot, newImplementation)
    }
  }
}

// File: zos-lib/contracts/upgradeability/AdminUpgradeabilityProxy.sol

/**
 * @title AdminUpgradeabilityProxy
 * @dev This contract combines an upgradeability proxy with an authorization
 * mechanism for administrative tasks.
 * All external functions in this contract must be guarded by the
 * `ifAdmin` modifier. See ethereum/solidity#3864 for a Solidity
 * feature proposal that would enable this to be done automatically.
 */
contract AdminUpgradeabilityProxy is UpgradeabilityProxy {
  /**
   * @dev Emitted when the administration has been transferred.
   * @param previousAdmin Address of the previous admin.
   * @param newAdmin Address of the new admin.
   */
  event AdminChanged(address previousAdmin, address newAdmin);

  /**
   * @dev Storage slot with the admin of the contract.
   * This is the keccak-256 hash of "org.zeppelinos.proxy.admin", and is
   * validated in the constructor.
   */
  bytes32 private constant ADMIN_SLOT = 0x10d6a54a4754c8869d6886b5f5d7fbfa5b4522237ea5c60d11bc4e7a1ff9390b;

  /**
   * @dev Modifier to check whether the `msg.sender` is the admin.
   * If it is, it will run the function. Otherwise, it will delegate the call
   * to the implementation.
   */
  modifier ifAdmin() {
    if (msg.sender == _admin()) {
      _;
    } else {
      _fallback();
    }
  }

  /**
   * Contract constructor.
   * It sets the `msg.sender` as the proxy administrator.
   * @param _implementation address of the initial implementation.
   */
  constructor(address _implementation) UpgradeabilityProxy(_implementation) public {
    assert(ADMIN_SLOT == keccak256("org.zeppelinos.proxy.admin"));

    _setAdmin(msg.sender);
  }

  /**
   * @return The address of the proxy admin.
   */
  function admin() external view ifAdmin returns (address) {
    return _admin();
  }

  /**
   * @return The address of the implementation.
   */
  function implementation() external view ifAdmin returns (address) {
    return _implementation();
  }

  /**
   * @dev Changes the admin of the proxy.
   * Only the current admin can call this function.
   * @param newAdmin Address to transfer proxy administration to.
   */
  function changeAdmin(address newAdmin) external ifAdmin {
    require(newAdmin != address(0), "Cannot change the admin of a proxy to the zero address");
    emit AdminChanged(_admin(), newAdmin);
    _setAdmin(newAdmin);
  }

  /**
   * @dev Upgrade the backing implementation of the proxy.
   * Only the admin can call this function.
   * @param newImplementation Address of the new implementation.
   */
  function upgradeTo(address newImplementation) external ifAdmin {
    _upgradeTo(newImplementation);
  }

  /**
   * @dev Upgrade the backing implementation of the proxy and call a function
   * on the new implementation.
   * This is useful to initialize the proxied contract.
   * @param newImplementation Address of the new implementation.
   * @param data Data to send as msg.data in the low level call.
   * It should include the signature and the parameters of the function to be
   * called, as described in
   * https://solidity.readthedocs.io/en/develop/abi-spec.html#function-selector-and-argument-encoding.
   */
  function upgradeToAndCall(address newImplementation, bytes data) payable external ifAdmin {
    _upgradeTo(newImplementation);
    require(address(this).call.value(msg.value)(data));
  }

  /**
   * @return The admin slot.
   */
  function _admin() internal view returns (address adm) {
    bytes32 slot = ADMIN_SLOT;
    assembly {
      adm := sload(slot)
    }
  }

  /**
   * @dev Sets the address of the proxy admin.
   * @param newAdmin Address of the new proxy admin.
   */
  function _setAdmin(address newAdmin) internal {
    bytes32 slot = ADMIN_SLOT;

    assembly {
      sstore(slot, newAdmin)
    }
  }

  /**
   * @dev Only fall back when the sender is not the admin.
   */
  function _willFallback() internal {
    require(msg.sender != _admin(), "Cannot call fallback function from the proxy admin");
    super._willFallback();
  }
}

// File: contracts/FiatTokenProxy.sol

/**
* Copyright CENTRE SECZ 2018
*
* Permission is hereby granted, free of charge, to any person obtaining a copy 
* of this software and associated documentation files (the "Software"), to deal 
* in the Software without restriction, including without limitation the rights 
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 
* copies of the Software, and to permit persons to whom the Software is furnished to 
* do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all 
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE 
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/

pragma solidity ^0.4.24;


/**
 * @title FiatTokenProxy
 * @dev This contract proxies FiatToken calls and enables FiatToken upgrades
*/ 
contract FiatTokenProxy is AdminUpgradeabilityProxy {
    constructor(address _implementation) public AdminUpgradeabilityProxy(_implementation) {
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (interfaces/draft-IERC1822.sol)
pragma solidity ^0.8.0;
/**
 * @dev ERC1822: Universal Upgradeable Proxy Standard (UUPS) documents a method for upgradeability through a simplified
 * proxy whose upgrades are fully controlled by the current implementation.
 */
interface IERC1822Proxiable {
    /**
     * @dev Returns the storage slot that the proxiable contract assumes is being used to store the implementation
     * address.
     *
     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks
     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this
     * function revert if invoked through a proxy.
     */
    function proxiableUUID() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.3) (interfaces/IERC1967.sol)
pragma solidity ^0.8.0;
/**
 * @dev ERC-1967: Proxy Storage Slots. This interface contains the events defined in the ERC.
 *
 * _Available since v4.9._
 */
interface IERC1967 {
    /**
     * @dev Emitted when the implementation is upgraded.
     */
    event Upgraded(address indexed implementation);
    /**
     * @dev Emitted when the admin account has changed.
     */
    event AdminChanged(address previousAdmin, address newAdmin);
    /**
     * @dev Emitted when the beacon is changed.
     */
    event BeaconUpgraded(address indexed beacon);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (proxy/beacon/BeaconProxy.sol)
pragma solidity ^0.8.0;
import "./IBeacon.sol";
import "../Proxy.sol";
import "../ERC1967/ERC1967Upgrade.sol";
/**
 * @dev This contract implements a proxy that gets the implementation address for each call from an {UpgradeableBeacon}.
 *
 * The beacon address is stored in storage slot `uint256(keccak256('eip1967.proxy.beacon')) - 1`, so that it doesn't
 * conflict with the storage layout of the implementation behind the proxy.
 *
 * _Available since v3.4._
 */
contract BeaconProxy is Proxy, ERC1967Upgrade {
    /**
     * @dev Initializes the proxy with `beacon`.
     *
     * If `data` is nonempty, it's used as data in a delegate call to the implementation returned by the beacon. This
     * will typically be an encoded function call, and allows initializing the storage of the proxy like a Solidity
     * constructor.
     *
     * Requirements:
     *
     * - `beacon` must be a contract with the interface {IBeacon}.
     */
    constructor(address beacon, bytes memory data) payable {
        _upgradeBeaconToAndCall(beacon, data, false);
    }
    /**
     * @dev Returns the current beacon address.
     */
    function _beacon() internal view virtual returns (address) {
        return _getBeacon();
    }
    /**
     * @dev Returns the current implementation address of the associated beacon.
     */
    function _implementation() internal view virtual override returns (address) {
        return IBeacon(_getBeacon()).implementation();
    }
    /**
     * @dev Changes the proxy to use a new beacon. Deprecated: see {_upgradeBeaconToAndCall}.
     *
     * If `data` is nonempty, it's used as data in a delegate call to the implementation returned by the beacon.
     *
     * Requirements:
     *
     * - `beacon` must be a contract.
     * - The implementation returned by `beacon` must be a contract.
     */
    function _setBeacon(address beacon, bytes memory data) internal virtual {
        _upgradeBeaconToAndCall(beacon, data, false);
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/beacon/IBeacon.sol)
pragma solidity ^0.8.0;
/**
 * @dev This is the interface that {BeaconProxy} expects of its beacon.
 */
interface IBeacon {
    /**
     * @dev Must return an address that can be used as a delegate call target.
     *
     * {BeaconProxy} will check that this address is a contract.
     */
    function implementation() external view returns (address);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/beacon/UpgradeableBeacon.sol)
pragma solidity ^0.8.0;
import "./IBeacon.sol";
import "../../access/Ownable.sol";
import "../../utils/Address.sol";
/**
 * @dev This contract is used in conjunction with one or more instances of {BeaconProxy} to determine their
 * implementation contract, which is where they will delegate all function calls.
 *
 * An owner is able to change the implementation the beacon points to, thus upgrading the proxies that use this beacon.
 */
contract UpgradeableBeacon is IBeacon, Ownable {
    address private _implementation;
    /**
     * @dev Emitted when the implementation returned by the beacon is changed.
     */
    event Upgraded(address indexed implementation);
    /**
     * @dev Sets the address of the initial implementation, and the deployer account as the owner who can upgrade the
     * beacon.
     */
    constructor(address implementation_) {
        _setImplementation(implementation_);
    }
    /**
     * @dev Returns the current implementation address.
     */
    function implementation() public view virtual override returns (address) {
        return _implementation;
    }
    /**
     * @dev Upgrades the beacon to a new implementation.
     *
     * Emits an {Upgraded} event.
     *
     * Requirements:
     *
     * - msg.sender must be the owner of the contract.
     * - `newImplementation` must be a contract.
     */
    function upgradeTo(address newImplementation) public virtual onlyOwner {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
    }
    /**
     * @dev Sets the implementation contract address for this beacon
     *
     * Requirements:
     *
     * - `newImplementation` must be a contract.
     */
    function _setImplementation(address newImplementation) private {
        require(Address.isContract(newImplementation), "UpgradeableBeacon: implementation is not a contract");
        _implementation = newImplementation;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (proxy/ERC1967/ERC1967Proxy.sol)
pragma solidity ^0.8.0;
import "../Proxy.sol";
import "./ERC1967Upgrade.sol";
/**
 * @dev This contract implements an upgradeable proxy. It is upgradeable because calls are delegated to an
 * implementation address that can be changed. This address is stored in storage in the location specified by
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967], so that it doesn't conflict with the storage layout of the
 * implementation behind the proxy.
 */
contract ERC1967Proxy is Proxy, ERC1967Upgrade {
    /**
     * @dev Initializes the upgradeable proxy with an initial implementation specified by `_logic`.
     *
     * If `_data` is nonempty, it's used as data in a delegate call to `_logic`. This will typically be an encoded
     * function call, and allows initializing the storage of the proxy like a Solidity constructor.
     */
    constructor(address _logic, bytes memory _data) payable {
        _upgradeToAndCall(_logic, _data, false);
    }
    /**
     * @dev Returns the current implementation address.
     */
    function _implementation() internal view virtual override returns (address impl) {
        return ERC1967Upgrade._getImplementation();
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.3) (proxy/ERC1967/ERC1967Upgrade.sol)
pragma solidity ^0.8.2;
import "../beacon/IBeacon.sol";
import "../../interfaces/IERC1967.sol";
import "../../interfaces/draft-IERC1822.sol";
import "../../utils/Address.sol";
import "../../utils/StorageSlot.sol";
/**
 * @dev This abstract contract provides getters and event emitting update functions for
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967] slots.
 *
 * _Available since v4.1._
 *
 * @custom:oz-upgrades-unsafe-allow delegatecall
 */
abstract contract ERC1967Upgrade is IERC1967 {
    // This is the keccak-256 hash of "eip1967.proxy.rollback" subtracted by 1
    bytes32 private constant _ROLLBACK_SLOT = 0x4910fdfa16fed3260ed0e7147f7cc6da11a60208b5b9406d12a635614ffd9143;
    /**
     * @dev Storage slot with the address of the current implementation.
     * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
    /**
     * @dev Returns the current implementation address.
     */
    function _getImplementation() internal view returns (address) {
        return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
    }
    /**
     * @dev Stores a new address in the EIP1967 implementation slot.
     */
    function _setImplementation(address newImplementation) private {
        require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
        StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
    }
    /**
     * @dev Perform implementation upgrade
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeTo(address newImplementation) internal {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
    }
    /**
     * @dev Perform implementation upgrade with additional setup call.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeToAndCall(
        address newImplementation,
        bytes memory data,
        bool forceCall
    ) internal {
        _upgradeTo(newImplementation);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(newImplementation, data);
        }
    }
    /**
     * @dev Perform implementation upgrade with security checks for UUPS proxies, and additional setup call.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeToAndCallUUPS(
        address newImplementation,
        bytes memory data,
        bool forceCall
    ) internal {
        // Upgrades from old implementations will perform a rollback test. This test requires the new
        // implementation to upgrade back to the old, non-ERC1822 compliant, implementation. Removing
        // this special case will break upgrade paths from old UUPS implementation to new ones.
        if (StorageSlot.getBooleanSlot(_ROLLBACK_SLOT).value) {
            _setImplementation(newImplementation);
        } else {
            try IERC1822Proxiable(newImplementation).proxiableUUID() returns (bytes32 slot) {
                require(slot == _IMPLEMENTATION_SLOT, "ERC1967Upgrade: unsupported proxiableUUID");
            } catch {
                revert("ERC1967Upgrade: new implementation is not UUPS");
            }
            _upgradeToAndCall(newImplementation, data, forceCall);
        }
    }
    /**
     * @dev Storage slot with the admin of the contract.
     * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 internal constant _ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
    /**
     * @dev Returns the current admin.
     */
    function _getAdmin() internal view returns (address) {
        return StorageSlot.getAddressSlot(_ADMIN_SLOT).value;
    }
    /**
     * @dev Stores a new address in the EIP1967 admin slot.
     */
    function _setAdmin(address newAdmin) private {
        require(newAdmin != address(0), "ERC1967: new admin is the zero address");
        StorageSlot.getAddressSlot(_ADMIN_SLOT).value = newAdmin;
    }
    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {AdminChanged} event.
     */
    function _changeAdmin(address newAdmin) internal {
        emit AdminChanged(_getAdmin(), newAdmin);
        _setAdmin(newAdmin);
    }
    /**
     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.
     * This is bytes32(uint256(keccak256('eip1967.proxy.beacon')) - 1)) and is validated in the constructor.
     */
    bytes32 internal constant _BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;
    /**
     * @dev Returns the current beacon.
     */
    function _getBeacon() internal view returns (address) {
        return StorageSlot.getAddressSlot(_BEACON_SLOT).value;
    }
    /**
     * @dev Stores a new beacon in the EIP1967 beacon slot.
     */
    function _setBeacon(address newBeacon) private {
        require(Address.isContract(newBeacon), "ERC1967: new beacon is not a contract");
        require(
            Address.isContract(IBeacon(newBeacon).implementation()),
            "ERC1967: beacon implementation is not a contract"
        );
        StorageSlot.getAddressSlot(_BEACON_SLOT).value = newBeacon;
    }
    /**
     * @dev Perform beacon upgrade with additional setup call. Note: This upgrades the address of the beacon, it does
     * not upgrade the implementation contained in the beacon (see {UpgradeableBeacon-_setImplementation} for that).
     *
     * Emits a {BeaconUpgraded} event.
     */
    function _upgradeBeaconToAndCall(
        address newBeacon,
        bytes memory data,
        bool forceCall
    ) internal {
        _setBeacon(newBeacon);
        emit BeaconUpgraded(newBeacon);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
 * @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
 * instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
 * be specified by overriding the virtual {_implementation} function.
 *
 * Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
 * different contract through the {_delegate} function.
 *
 * The success and return data of the delegated call will be returned back to the caller of the proxy.
 */
abstract contract Proxy {
    /**
     * @dev Delegates the current call to `implementation`.
     *
     * This function does not return to its internal call site, it will return directly to the external caller.
     */
    function _delegate(address implementation) internal virtual {
        assembly {
            // Copy msg.data. We take full control of memory in this inline assembly
            // block because it will not return to Solidity code. We overwrite the
            // Solidity scratch pad at memory position 0.
            calldatacopy(0, 0, calldatasize())
            // Call the implementation.
            // out and outsize are 0 because we don't know the size yet.
            let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
            // Copy the returned data.
            returndatacopy(0, 0, returndatasize())
            switch result
            // delegatecall returns 0 on error.
            case 0 {
                revert(0, returndatasize())
            }
            default {
                return(0, returndatasize())
            }
        }
    }
    /**
     * @dev This is a virtual function that should be overridden so it returns the address to which the fallback function
     * and {_fallback} should delegate.
     */
    function _implementation() internal view virtual returns (address);
    /**
     * @dev Delegates the current call to the address returned by `_implementation()`.
     *
     * This function does not return to its internal call site, it will return directly to the external caller.
     */
    function _fallback() internal virtual {
        _beforeFallback();
        _delegate(_implementation());
    }
    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
     * function in the contract matches the call data.
     */
    fallback() external payable virtual {
        _fallback();
    }
    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
     * is empty.
     */
    receive() external payable virtual {
        _fallback();
    }
    /**
     * @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
     * call, or as part of the Solidity `fallback` or `receive` functions.
     *
     * If overridden should call `super._beforeFallback()`.
     */
    function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.3) (proxy/transparent/ProxyAdmin.sol)
pragma solidity ^0.8.0;
import "./TransparentUpgradeableProxy.sol";
import "../../access/Ownable.sol";
/**
 * @dev This is an auxiliary contract meant to be assigned as the admin of a {TransparentUpgradeableProxy}. For an
 * explanation of why you would want to use this see the documentation for {TransparentUpgradeableProxy}.
 */
contract ProxyAdmin is Ownable {
    /**
     * @dev Returns the current implementation of `proxy`.
     *
     * Requirements:
     *
     * - This contract must be the admin of `proxy`.
     */
    function getProxyImplementation(ITransparentUpgradeableProxy proxy) public view virtual returns (address) {
        // We need to manually run the static call since the getter cannot be flagged as view
        // bytes4(keccak256("implementation()")) == 0x5c60da1b
        (bool success, bytes memory returndata) = address(proxy).staticcall(hex"5c60da1b");
        require(success);
        return abi.decode(returndata, (address));
    }
    /**
     * @dev Returns the current admin of `proxy`.
     *
     * Requirements:
     *
     * - This contract must be the admin of `proxy`.
     */
    function getProxyAdmin(ITransparentUpgradeableProxy proxy) public view virtual returns (address) {
        // We need to manually run the static call since the getter cannot be flagged as view
        // bytes4(keccak256("admin()")) == 0xf851a440
        (bool success, bytes memory returndata) = address(proxy).staticcall(hex"f851a440");
        require(success);
        return abi.decode(returndata, (address));
    }
    /**
     * @dev Changes the admin of `proxy` to `newAdmin`.
     *
     * Requirements:
     *
     * - This contract must be the current admin of `proxy`.
     */
    function changeProxyAdmin(ITransparentUpgradeableProxy proxy, address newAdmin) public virtual onlyOwner {
        proxy.changeAdmin(newAdmin);
    }
    /**
     * @dev Upgrades `proxy` to `implementation`. See {TransparentUpgradeableProxy-upgradeTo}.
     *
     * Requirements:
     *
     * - This contract must be the admin of `proxy`.
     */
    function upgrade(ITransparentUpgradeableProxy proxy, address implementation) public virtual onlyOwner {
        proxy.upgradeTo(implementation);
    }
    /**
     * @dev Upgrades `proxy` to `implementation` and calls a function on the new implementation. See
     * {TransparentUpgradeableProxy-upgradeToAndCall}.
     *
     * Requirements:
     *
     * - This contract must be the admin of `proxy`.
     */
    function upgradeAndCall(
        ITransparentUpgradeableProxy proxy,
        address implementation,
        bytes memory data
    ) public payable virtual onlyOwner {
        proxy.upgradeToAndCall{value: msg.value}(implementation, data);
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.3) (proxy/transparent/TransparentUpgradeableProxy.sol)
pragma solidity ^0.8.0;
import "../ERC1967/ERC1967Proxy.sol";
/**
 * @dev Interface for {TransparentUpgradeableProxy}. In order to implement transparency, {TransparentUpgradeableProxy}
 * does not implement this interface directly, and some of its functions are implemented by an internal dispatch
 * mechanism. The compiler is unaware that these functions are implemented by {TransparentUpgradeableProxy} and will not
 * include them in the ABI so this interface must be used to interact with it.
 */
interface ITransparentUpgradeableProxy is IERC1967 {
    function admin() external view returns (address);
    function implementation() external view returns (address);
    function changeAdmin(address) external;
    function upgradeTo(address) external;
    function upgradeToAndCall(address, bytes memory) external payable;
}
/**
 * @dev This contract implements a proxy that is upgradeable by an admin.
 *
 * To avoid https://medium.com/nomic-labs-blog/malicious-backdoors-in-ethereum-proxies-62629adf3357[proxy selector
 * clashing], which can potentially be used in an attack, this contract uses the
 * https://blog.openzeppelin.com/the-transparent-proxy-pattern/[transparent proxy pattern]. This pattern implies two
 * things that go hand in hand:
 *
 * 1. If any account other than the admin calls the proxy, the call will be forwarded to the implementation, even if
 * that call matches one of the admin functions exposed by the proxy itself.
 * 2. If the admin calls the proxy, it can access the admin functions, but its calls will never be forwarded to the
 * implementation. If the admin tries to call a function on the implementation it will fail with an error that says
 * "admin cannot fallback to proxy target".
 *
 * These properties mean that the admin account can only be used for admin actions like upgrading the proxy or changing
 * the admin, so it's best if it's a dedicated account that is not used for anything else. This will avoid headaches due
 * to sudden errors when trying to call a function from the proxy implementation.
 *
 * Our recommendation is for the dedicated account to be an instance of the {ProxyAdmin} contract. If set up this way,
 * you should think of the `ProxyAdmin` instance as the real administrative interface of your proxy.
 *
 * NOTE: The real interface of this proxy is that defined in `ITransparentUpgradeableProxy`. This contract does not
 * inherit from that interface, and instead the admin functions are implicitly implemented using a custom dispatch
 * mechanism in `_fallback`. Consequently, the compiler will not produce an ABI for this contract. This is necessary to
 * fully implement transparency without decoding reverts caused by selector clashes between the proxy and the
 * implementation.
 *
 * WARNING: It is not recommended to extend this contract to add additional external functions. If you do so, the compiler
 * will not check that there are no selector conflicts, due to the note above. A selector clash between any new function
 * and the functions declared in {ITransparentUpgradeableProxy} will be resolved in favor of the new one. This could
 * render the admin operations inaccessible, which could prevent upgradeability. Transparency may also be compromised.
 */
contract TransparentUpgradeableProxy is ERC1967Proxy {
    /**
     * @dev Initializes an upgradeable proxy managed by `_admin`, backed by the implementation at `_logic`, and
     * optionally initialized with `_data` as explained in {ERC1967Proxy-constructor}.
     */
    constructor(
        address _logic,
        address admin_,
        bytes memory _data
    ) payable ERC1967Proxy(_logic, _data) {
        _changeAdmin(admin_);
    }
    /**
     * @dev Modifier used internally that will delegate the call to the implementation unless the sender is the admin.
     *
     * CAUTION: This modifier is deprecated, as it could cause issues if the modified function has arguments, and the
     * implementation provides a function with the same selector.
     */
    modifier ifAdmin() {
        if (msg.sender == _getAdmin()) {
            _;
        } else {
            _fallback();
        }
    }
    /**
     * @dev If caller is the admin process the call internally, otherwise transparently fallback to the proxy behavior
     */
    function _fallback() internal virtual override {
        if (msg.sender == _getAdmin()) {
            bytes memory ret;
            bytes4 selector = msg.sig;
            if (selector == ITransparentUpgradeableProxy.upgradeTo.selector) {
                ret = _dispatchUpgradeTo();
            } else if (selector == ITransparentUpgradeableProxy.upgradeToAndCall.selector) {
                ret = _dispatchUpgradeToAndCall();
            } else if (selector == ITransparentUpgradeableProxy.changeAdmin.selector) {
                ret = _dispatchChangeAdmin();
            } else if (selector == ITransparentUpgradeableProxy.admin.selector) {
                ret = _dispatchAdmin();
            } else if (selector == ITransparentUpgradeableProxy.implementation.selector) {
                ret = _dispatchImplementation();
            } else {
                revert("TransparentUpgradeableProxy: admin cannot fallback to proxy target");
            }
            assembly {
                return(add(ret, 0x20), mload(ret))
            }
        } else {
            super._fallback();
        }
    }
    /**
     * @dev Returns the current admin.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`
     */
    function _dispatchAdmin() private returns (bytes memory) {
        _requireZeroValue();
        address admin = _getAdmin();
        return abi.encode(admin);
    }
    /**
     * @dev Returns the current implementation.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc`
     */
    function _dispatchImplementation() private returns (bytes memory) {
        _requireZeroValue();
        address implementation = _implementation();
        return abi.encode(implementation);
    }
    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {AdminChanged} event.
     */
    function _dispatchChangeAdmin() private returns (bytes memory) {
        _requireZeroValue();
        address newAdmin = abi.decode(msg.data[4:], (address));
        _changeAdmin(newAdmin);
        return "";
    }
    /**
     * @dev Upgrade the implementation of the proxy.
     */
    function _dispatchUpgradeTo() private returns (bytes memory) {
        _requireZeroValue();
        address newImplementation = abi.decode(msg.data[4:], (address));
        _upgradeToAndCall(newImplementation, bytes(""), false);
        return "";
    }
    /**
     * @dev Upgrade the implementation of the proxy, and then call a function from the new implementation as specified
     * by `data`, which should be an encoded function call. This is useful to initialize new storage variables in the
     * proxied contract.
     */
    function _dispatchUpgradeToAndCall() private returns (bytes memory) {
        (address newImplementation, bytes memory data) = abi.decode(msg.data[4:], (address, bytes));
        _upgradeToAndCall(newImplementation, data, true);
        return "";
    }
    /**
     * @dev Returns the current admin.
     */
    function _admin() internal view virtual returns (address) {
        return _getAdmin();
    }
    /**
     * @dev To keep this contract fully transparent, all `ifAdmin` functions must be payable. This helper is here to
     * emulate some proxy functions being non-payable while still allowing value to pass through.
     */
    function _requireZeroValue() private {
        require(msg.value == 0);
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.
        return account.code.length > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }
    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }
    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 *
 * _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }
    struct BooleanSlot {
        bool value;
    }
    struct Bytes32Slot {
        bytes32 value;
    }
    struct Uint256Slot {
        uint256 value;
    }
    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
}

// Copyright (C) 2015, 2016, 2017 Dapphub

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.4.18;

contract WETH9 {
    string public name     = "Wrapped Ether";
    string public symbol   = "WETH";
    uint8  public decimals = 18;

    event  Approval(address indexed src, address indexed guy, uint wad);
    event  Transfer(address indexed src, address indexed dst, uint wad);
    event  Deposit(address indexed dst, uint wad);
    event  Withdrawal(address indexed src, uint wad);

    mapping (address => uint)                       public  balanceOf;
    mapping (address => mapping (address => uint))  public  allowance;

    function() public payable {
        deposit();
    }
    function deposit() public payable {
        balanceOf[msg.sender] += msg.value;
        Deposit(msg.sender, msg.value);
    }
    function withdraw(uint wad) public {
        require(balanceOf[msg.sender] >= wad);
        balanceOf[msg.sender] -= wad;
        msg.sender.transfer(wad);
        Withdrawal(msg.sender, wad);
    }

    function totalSupply() public view returns (uint) {
        return this.balance;
    }

    function approve(address guy, uint wad) public returns (bool) {
        allowance[msg.sender][guy] = wad;
        Approval(msg.sender, guy, wad);
        return true;
    }

    function transfer(address dst, uint wad) public returns (bool) {
        return transferFrom(msg.sender, dst, wad);
    }

    function transferFrom(address src, address dst, uint wad)
        public
        returns (bool)
    {
        require(balanceOf[src] >= wad);

        if (src != msg.sender && allowance[src][msg.sender] != uint(-1)) {
            require(allowance[src][msg.sender] >= wad);
            allowance[src][msg.sender] -= wad;
        }

        balanceOf[src] -= wad;
        balanceOf[dst] += wad;

        Transfer(src, dst, wad);

        return true;
    }
}


/*
                    GNU GENERAL PUBLIC LICENSE
                       Version 3, 29 June 2007

 Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
 Everyone is permitted to copy and distribute verbatim copies
 of this license document, but changing it is not allowed.

                            Preamble

  The GNU General Public License is a free, copyleft license for
software and other kinds of works.

  The licenses for most software and other practical works are designed
to take away your freedom to share and change the works.  By contrast,
the GNU General Public License is intended to guarantee your freedom to
share and change all versions of a program--to make sure it remains free
software for all its users.  We, the Free Software Foundation, use the
GNU General Public License for most of our software; it applies also to
any other work released this way by its authors.  You can apply it to
your programs, too.

  When we speak of free software, we are referring to freedom, not
price.  Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
them if you wish), that you receive source code or can get it if you
want it, that you can change the software or use pieces of it in new
free programs, and that you know you can do these things.

  To protect your rights, we need to prevent others from denying you
these rights or asking you to surrender the rights.  Therefore, you have
certain responsibilities if you distribute copies of the software, or if
you modify it: responsibilities to respect the freedom of others.

  For example, if you distribute copies of such a program, whether
gratis or for a fee, you must pass on to the recipients the same
freedoms that you received.  You must make sure that they, too, receive
or can get the source code.  And you must show them these terms so they
know their rights.

  Developers that use the GNU GPL protect your rights with two steps:
(1) assert copyright on the software, and (2) offer you this License
giving you legal permission to copy, distribute and/or modify it.

  For the developers' and authors' protection, the GPL clearly explains
that there is no warranty for this free software.  For both users' and
authors' sake, the GPL requires that modified versions be marked as
changed, so that their problems will not be attributed erroneously to
authors of previous versions.

  Some devices are designed to deny users access to install or run
modified versions of the software inside them, although the manufacturer
can do so.  This is fundamentally incompatible with the aim of
protecting users' freedom to change the software.  The systematic
pattern of such abuse occurs in the area of products for individuals to
use, which is precisely where it is most unacceptable.  Therefore, we
have designed this version of the GPL to prohibit the practice for those
products.  If such problems arise substantially in other domains, we
stand ready to extend this provision to those domains in future versions
of the GPL, as needed to protect the freedom of users.

  Finally, every program is threatened constantly by software patents.
States should not allow patents to restrict development and use of
software on general-purpose computers, but in those that do, we wish to
avoid the special danger that patents applied to a free program could
make it effectively proprietary.  To prevent this, the GPL assures that
patents cannot be used to render the program non-free.

  The precise terms and conditions for copying, distribution and
modification follow.

                       TERMS AND CONDITIONS

  0. Definitions.

  "This License" refers to version 3 of the GNU General Public License.

  "Copyright" also means copyright-like laws that apply to other kinds of
works, such as semiconductor masks.

  "The Program" refers to any copyrightable work licensed under this
License.  Each licensee is addressed as "you".  "Licensees" and
"recipients" may be individuals or organizations.

  To "modify" a work means to copy from or adapt all or part of the work
in a fashion requiring copyright permission, other than the making of an
exact copy.  The resulting work is called a "modified version" of the
earlier work or a work "based on" the earlier work.

  A "covered work" means either the unmodified Program or a work based
on the Program.

  To "propagate" a work means to do anything with it that, without
permission, would make you directly or secondarily liable for
infringement under applicable copyright law, except executing it on a
computer or modifying a private copy.  Propagation includes copying,
distribution (with or without modification), making available to the
public, and in some countries other activities as well.

  To "convey" a work means any kind of propagation that enables other
parties to make or receive copies.  Mere interaction with a user through
a computer network, with no transfer of a copy, is not conveying.

  An interactive user interface displays "Appropriate Legal Notices"
to the extent that it includes a convenient and prominently visible
feature that (1) displays an appropriate copyright notice, and (2)
tells the user that there is no warranty for the work (except to the
extent that warranties are provided), that licensees may convey the
work under this License, and how to view a copy of this License.  If
the interface presents a list of user commands or options, such as a
menu, a prominent item in the list meets this criterion.

  1. Source Code.

  The "source code" for a work means the preferred form of the work
for making modifications to it.  "Object code" means any non-source
form of a work.

  A "Standard Interface" means an interface that either is an official
standard defined by a recognized standards body, or, in the case of
interfaces specified for a particular programming language, one that
is widely used among developers working in that language.

  The "System Libraries" of an executable work include anything, other
than the work as a whole, that (a) is included in the normal form of
packaging a Major Component, but which is not part of that Major
Component, and (b) serves only to enable use of the work with that
Major Component, or to implement a Standard Interface for which an
implementation is available to the public in source code form.  A
"Major Component", in this context, means a major essential component
(kernel, window system, and so on) of the specific operating system
(if any) on which the executable work runs, or a compiler used to
produce the work, or an object code interpreter used to run it.

  The "Corresponding Source" for a work in object code form means all
the source code needed to generate, install, and (for an executable
work) run the object code and to modify the work, including scripts to
control those activities.  However, it does not include the work's
System Libraries, or general-purpose tools or generally available free
programs which are used unmodified in performing those activities but
which are not part of the work.  For example, Corresponding Source
includes interface definition files associated with source files for
the work, and the source code for shared libraries and dynamically
linked subprograms that the work is specifically designed to require,
such as by intimate data communication or control flow between those
subprograms and other parts of the work.

  The Corresponding Source need not include anything that users
can regenerate automatically from other parts of the Corresponding
Source.

  The Corresponding Source for a work in source code form is that
same work.

  2. Basic Permissions.

  All rights granted under this License are granted for the term of
copyright on the Program, and are irrevocable provided the stated
conditions are met.  This License explicitly affirms your unlimited
permission to run the unmodified Program.  The output from running a
covered work is covered by this License only if the output, given its
content, constitutes a covered work.  This License acknowledges your
rights of fair use or other equivalent, as provided by copyright law.

  You may make, run and propagate covered works that you do not
convey, without conditions so long as your license otherwise remains
in force.  You may convey covered works to others for the sole purpose
of having them make modifications exclusively for you, or provide you
with facilities for running those works, provided that you comply with
the terms of this License in conveying all material for which you do
not control copyright.  Those thus making or running the covered works
for you must do so exclusively on your behalf, under your direction
and control, on terms that prohibit them from making any copies of
your copyrighted material outside their relationship with you.

  Conveying under any other circumstances is permitted solely under
the conditions stated below.  Sublicensing is not allowed; section 10
makes it unnecessary.

  3. Protecting Users' Legal Rights From Anti-Circumvention Law.

  No covered work shall be deemed part of an effective technological
measure under any applicable law fulfilling obligations under article
11 of the WIPO copyright treaty adopted on 20 December 1996, or
similar laws prohibiting or restricting circumvention of such
measures.

  When you convey a covered work, you waive any legal power to forbid
circumvention of technological measures to the extent such circumvention
is effected by exercising rights under this License with respect to
the covered work, and you disclaim any intention to limit operation or
modification of the work as a means of enforcing, against the work's
users, your or third parties' legal rights to forbid circumvention of
technological measures.

  4. Conveying Verbatim Copies.

  You may convey verbatim copies of the Program's source code as you
receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice;
keep intact all notices stating that this License and any
non-permissive terms added in accord with section 7 apply to the code;
keep intact all notices of the absence of any warranty; and give all
recipients a copy of this License along with the Program.

  You may charge any price or no price for each copy that you convey,
and you may offer support or warranty protection for a fee.

  5. Conveying Modified Source Versions.

  You may convey a work based on the Program, or the modifications to
produce it from the Program, in the form of source code under the
terms of section 4, provided that you also meet all of these conditions:

    a) The work must carry prominent notices stating that you modified
    it, and giving a relevant date.

    b) The work must carry prominent notices stating that it is
    released under this License and any conditions added under section
    7.  This requirement modifies the requirement in section 4 to
    "keep intact all notices".

    c) You must license the entire work, as a whole, under this
    License to anyone who comes into possession of a copy.  This
    License will therefore apply, along with any applicable section 7
    additional terms, to the whole of the work, and all its parts,
    regardless of how they are packaged.  This License gives no
    permission to license the work in any other way, but it does not
    invalidate such permission if you have separately received it.

    d) If the work has interactive user interfaces, each must display
    Appropriate Legal Notices; however, if the Program has interactive
    interfaces that do not display Appropriate Legal Notices, your
    work need not make them do so.

  A compilation of a covered work with other separate and independent
works, which are not by their nature extensions of the covered work,
and which are not combined with it such as to form a larger program,
in or on a volume of a storage or distribution medium, is called an
"aggregate" if the compilation and its resulting copyright are not
used to limit the access or legal rights of the compilation's users
beyond what the individual works permit.  Inclusion of a covered work
in an aggregate does not cause this License to apply to the other
parts of the aggregate.

  6. Conveying Non-Source Forms.

  You may convey a covered work in object code form under the terms
of sections 4 and 5, provided that you also convey the
machine-readable Corresponding Source under the terms of this License,
in one of these ways:

    a) Convey the object code in, or embodied in, a physical product
    (including a physical distribution medium), accompanied by the
    Corresponding Source fixed on a durable physical medium
    customarily used for software interchange.

    b) Convey the object code in, or embodied in, a physical product
    (including a physical distribution medium), accompanied by a
    written offer, valid for at least three years and valid for as
    long as you offer spare parts or customer support for that product
    model, to give anyone who possesses the object code either (1) a
    copy of the Corresponding Source for all the software in the
    product that is covered by this License, on a durable physical
    medium customarily used for software interchange, for a price no
    more than your reasonable cost of physically performing this
    conveying of source, or (2) access to copy the
    Corresponding Source from a network server at no charge.

    c) Convey individual copies of the object code with a copy of the
    written offer to provide the Corresponding Source.  This
    alternative is allowed only occasionally and noncommercially, and
    only if you received the object code with such an offer, in accord
    with subsection 6b.

    d) Convey the object code by offering access from a designated
    place (gratis or for a charge), and offer equivalent access to the
    Corresponding Source in the same way through the same place at no
    further charge.  You need not require recipients to copy the
    Corresponding Source along with the object code.  If the place to
    copy the object code is a network server, the Corresponding Source
    may be on a different server (operated by you or a third party)
    that supports equivalent copying facilities, provided you maintain
    clear directions next to the object code saying where to find the
    Corresponding Source.  Regardless of what server hosts the
    Corresponding Source, you remain obligated to ensure that it is
    available for as long as needed to satisfy these requirements.

    e) Convey the object code using peer-to-peer transmission, provided
    you inform other peers where the object code and Corresponding
    Source of the work are being offered to the general public at no
    charge under subsection 6d.

  A separable portion of the object code, whose source code is excluded
from the Corresponding Source as a System Library, need not be
included in conveying the object code work.

  A "User Product" is either (1) a "consumer product", which means any
tangible personal property which is normally used for personal, family,
or household purposes, or (2) anything designed or sold for incorporation
into a dwelling.  In determining whether a product is a consumer product,
doubtful cases shall be resolved in favor of coverage.  For a particular
product received by a particular user, "normally used" refers to a
typical or common use of that class of product, regardless of the status
of the particular user or of the way in which the particular user
actually uses, or expects or is expected to use, the product.  A product
is a consumer product regardless of whether the product has substantial
commercial, industrial or non-consumer uses, unless such uses represent
the only significant mode of use of the product.

  "Installation Information" for a User Product means any methods,
procedures, authorization keys, or other information required to install
and execute modified versions of a covered work in that User Product from
a modified version of its Corresponding Source.  The information must
suffice to ensure that the continued functioning of the modified object
code is in no case prevented or interfered with solely because
modification has been made.

  If you convey an object code work under this section in, or with, or
specifically for use in, a User Product, and the conveying occurs as
part of a transaction in which the right of possession and use of the
User Product is transferred to the recipient in perpetuity or for a
fixed term (regardless of how the transaction is characterized), the
Corresponding Source conveyed under this section must be accompanied
by the Installation Information.  But this requirement does not apply
if neither you nor any third party retains the ability to install
modified object code on the User Product (for example, the work has
been installed in ROM).

  The requirement to provide Installation Information does not include a
requirement to continue to provide support service, warranty, or updates
for a work that has been modified or installed by the recipient, or for
the User Product in which it has been modified or installed.  Access to a
network may be denied when the modification itself materially and
adversely affects the operation of the network or violates the rules and
protocols for communication across the network.

  Corresponding Source conveyed, and Installation Information provided,
in accord with this section must be in a format that is publicly
documented (and with an implementation available to the public in
source code form), and must require no special password or key for
unpacking, reading or copying.

  7. Additional Terms.

  "Additional permissions" are terms that supplement the terms of this
License by making exceptions from one or more of its conditions.
Additional permissions that are applicable to the entire Program shall
be treated as though they were included in this License, to the extent
that they are valid under applicable law.  If additional permissions
apply only to part of the Program, that part may be used separately
under those permissions, but the entire Program remains governed by
this License without regard to the additional permissions.

  When you convey a copy of a covered work, you may at your option
remove any additional permissions from that copy, or from any part of
it.  (Additional permissions may be written to require their own
removal in certain cases when you modify the work.)  You may place
additional permissions on material, added by you to a covered work,
for which you have or can give appropriate copyright permission.

  Notwithstanding any other provision of this License, for material you
add to a covered work, you may (if authorized by the copyright holders of
that material) supplement the terms of this License with terms:

    a) Disclaiming warranty or limiting liability differently from the
    terms of sections 15 and 16 of this License; or

    b) Requiring preservation of specified reasonable legal notices or
    author attributions in that material or in the Appropriate Legal
    Notices displayed by works containing it; or

    c) Prohibiting misrepresentation of the origin of that material, or
    requiring that modified versions of such material be marked in
    reasonable ways as different from the original version; or

    d) Limiting the use for publicity purposes of names of licensors or
    authors of the material; or

    e) Declining to grant rights under trademark law for use of some
    trade names, trademarks, or service marks; or

    f) Requiring indemnification of licensors and authors of that
    material by anyone who conveys the material (or modified versions of
    it) with contractual assumptions of liability to the recipient, for
    any liability that these contractual assumptions directly impose on
    those licensors and authors.

  All other non-permissive additional terms are considered "further
restrictions" within the meaning of section 10.  If the Program as you
received it, or any part of it, contains a notice stating that it is
governed by this License along with a term that is a further
restriction, you may remove that term.  If a license document contains
a further restriction but permits relicensing or conveying under this
License, you may add to a covered work material governed by the terms
of that license document, provided that the further restriction does
not survive such relicensing or conveying.

  If you add terms to a covered work in accord with this section, you
must place, in the relevant source files, a statement of the
additional terms that apply to those files, or a notice indicating
where to find the applicable terms.

  Additional terms, permissive or non-permissive, may be stated in the
form of a separately written license, or stated as exceptions;
the above requirements apply either way.

  8. Termination.

  You may not propagate or modify a covered work except as expressly
provided under this License.  Any attempt otherwise to propagate or
modify it is void, and will automatically terminate your rights under
this License (including any patent licenses granted under the third
paragraph of section 11).

  However, if you cease all violation of this License, then your
license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and
finally terminates your license, and (b) permanently, if the copyright
holder fails to notify you of the violation by some reasonable means
prior to 60 days after the cessation.

  Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have
received notice of violation of this License (for any work) from that
copyright holder, and you cure the violation prior to 30 days after
your receipt of the notice.

  Termination of your rights under this section does not terminate the
licenses of parties who have received copies or rights from you under
this License.  If your rights have been terminated and not permanently
reinstated, you do not qualify to receive new licenses for the same
material under section 10.

  9. Acceptance Not Required for Having Copies.

  You are not required to accept this License in order to receive or
run a copy of the Program.  Ancillary propagation of a covered work
occurring solely as a consequence of using peer-to-peer transmission
to receive a copy likewise does not require acceptance.  However,
nothing other than this License grants you permission to propagate or
modify any covered work.  These actions infringe copyright if you do
not accept this License.  Therefore, by modifying or propagating a
covered work, you indicate your acceptance of this License to do so.

  10. Automatic Licensing of Downstream Recipients.

  Each time you convey a covered work, the recipient automatically
receives a license from the original licensors, to run, modify and
propagate that work, subject to this License.  You are not responsible
for enforcing compliance by third parties with this License.

  An "entity transaction" is a transaction transferring control of an
organization, or substantially all assets of one, or subdividing an
organization, or merging organizations.  If propagation of a covered
work results from an entity transaction, each party to that
transaction who receives a copy of the work also receives whatever
licenses to the work the party's predecessor in interest had or could
give under the previous paragraph, plus a right to possession of the
Corresponding Source of the work from the predecessor in interest, if
the predecessor has it or can get it with reasonable efforts.

  You may not impose any further restrictions on the exercise of the
rights granted or affirmed under this License.  For example, you may
not impose a license fee, royalty, or other charge for exercise of
rights granted under this License, and you may not initiate litigation
(including a cross-claim or counterclaim in a lawsuit) alleging that
any patent claim is infringed by making, using, selling, offering for
sale, or importing the Program or any portion of it.

  11. Patents.

  A "contributor" is a copyright holder who authorizes use under this
License of the Program or a work on which the Program is based.  The
work thus licensed is called the contributor's "contributor version".

  A contributor's "essential patent claims" are all patent claims
owned or controlled by the contributor, whether already acquired or
hereafter acquired, that would be infringed by some manner, permitted
by this License, of making, using, or selling its contributor version,
but do not include claims that would be infringed only as a
consequence of further modification of the contributor version.  For
purposes of this definition, "control" includes the right to grant
patent sublicenses in a manner consistent with the requirements of
this License.

  Each contributor grants you a non-exclusive, worldwide, royalty-free
patent license under the contributor's essential patent claims, to
make, use, sell, offer for sale, import and otherwise run, modify and
propagate the contents of its contributor version.

  In the following three paragraphs, a "patent license" is any express
agreement or commitment, however denominated, not to enforce a patent
(such as an express permission to practice a patent or covenant not to
sue for patent infringement).  To "grant" such a patent license to a
party means to make such an agreement or commitment not to enforce a
patent against the party.

  If you convey a covered work, knowingly relying on a patent license,
and the Corresponding Source of the work is not available for anyone
to copy, free of charge and under the terms of this License, through a
publicly available network server or other readily accessible means,
then you must either (1) cause the Corresponding Source to be so
available, or (2) arrange to deprive yourself of the benefit of the
patent license for this particular work, or (3) arrange, in a manner
consistent with the requirements of this License, to extend the patent
license to downstream recipients.  "Knowingly relying" means you have
actual knowledge that, but for the patent license, your conveying the
covered work in a country, or your recipient's use of the covered work
in a country, would infringe one or more identifiable patents in that
country that you have reason to believe are valid.

  If, pursuant to or in connection with a single transaction or
arrangement, you convey, or propagate by procuring conveyance of, a
covered work, and grant a patent license to some of the parties
receiving the covered work authorizing them to use, propagate, modify
or convey a specific copy of the covered work, then the patent license
you grant is automatically extended to all recipients of the covered
work and works based on it.

  A patent license is "discriminatory" if it does not include within
the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights that are
specifically granted under this License.  You may not convey a covered
work if you are a party to an arrangement with a third party that is
in the business of distributing software, under which you make payment
to the third party based on the extent of your activity of conveying
the work, and under which the third party grants, to any of the
parties who would receive the covered work from you, a discriminatory
patent license (a) in connection with copies of the covered work
conveyed by you (or copies made from those copies), or (b) primarily
for and in connection with specific products or compilations that
contain the covered work, unless you entered into that arrangement,
or that patent license was granted, prior to 28 March 2007.

  Nothing in this License shall be construed as excluding or limiting
any implied license or other defenses to infringement that may
otherwise be available to you under applicable patent law.

  12. No Surrender of Others' Freedom.

  If conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License.  If you cannot convey a
covered work so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may
not convey it at all.  For example, if you agree to terms that obligate you
to collect a royalty for further conveying from those to whom you convey
the Program, the only way you could satisfy both those terms and this
License would be to refrain entirely from conveying the Program.

  13. Use with the GNU Affero General Public License.

  Notwithstanding any other provision of this License, you have
permission to link or combine any covered work with a work licensed
under version 3 of the GNU Affero General Public License into a single
combined work, and to convey the resulting work.  The terms of this
License will continue to apply to the part which is the covered work,
but the special requirements of the GNU Affero General Public License,
section 13, concerning interaction through a network will apply to the
combination as such.

  14. Revised Versions of this License.

  The Free Software Foundation may publish revised and/or new versions of
the GNU General Public License from time to time.  Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.

  Each version is given a distinguishing version number.  If the
Program specifies that a certain numbered version of the GNU General
Public License "or any later version" applies to it, you have the
option of following the terms and conditions either of that numbered
version or of any later version published by the Free Software
Foundation.  If the Program does not specify a version number of the
GNU General Public License, you may choose any version ever published
by the Free Software Foundation.

  If the Program specifies that a proxy can decide which future
versions of the GNU General Public License can be used, that proxy's
public statement of acceptance of a version permanently authorizes you
to choose that version for the Program.

  Later license versions may give you additional or different
permissions.  However, no additional obligations are imposed on any
author or copyright holder as a result of your choosing to follow a
later version.

  15. Disclaimer of Warranty.

  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

  16. Limitation of Liability.

  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.

  17. Interpretation of Sections 15 and 16.

  If the disclaimer of warranty and limitation of liability provided
above cannot be given local legal effect according to their terms,
reviewing courts shall apply local law that most closely approximates
an absolute waiver of all civil liability in connection with the
Program, unless a warranty or assumption of liability accompanies a
copy of the Program in return for a fee.

                     END OF TERMS AND CONDITIONS

            How to Apply These Terms to Your New Programs

  If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.

  To do so, attach the following notices to the program.  It is safest
to attach them to the start of each source file to most effectively
state the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.

    <one line to give the program's name and a brief idea of what it does.>
    Copyright (C) <year>  <name of author>

    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.

Also add information on how to contact you by electronic and paper mail.

  If the program does terminal interaction, make it output a short
notice like this when it starts in an interactive mode:

    <program>  Copyright (C) <year>  <name of author>
    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
    This is free software, and you are welcome to redistribute it
    under certain conditions; type `show c' for details.

The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License.  Of course, your program's commands
might be different; for a GUI interface, you would use an "about box".

  You should also get your employer (if you work as a programmer) or school,
if any, to sign a "copyright disclaimer" for the program, if necessary.
For more information on this, and how to apply and follow the GNU GPL, see
<http://www.gnu.org/licenses/>.

  The GNU General Public License does not permit incorporating your program
into proprietary programs.  If your program is a subroutine library, you
may consider it more useful to permit linking proprietary applications with
the library.  If this is what you want to do, use the GNU Lesser General
Public License instead of this License.  But first, please read
<http://www.gnu.org/philosophy/why-not-lgpl.html>.

*/

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.24;
import {ITypeAndVersion} from "../../shared/interfaces/ITypeAndVersion.sol";
import {IEVM2AnyOnRamp} from "../interfaces/IEVM2AnyOnRamp.sol";
import {IEVM2AnyOnRampClient} from "../interfaces/IEVM2AnyOnRampClient.sol";
import {IPoolV1} from "../interfaces/IPool.sol";
import {IPriceRegistry} from "../interfaces/IPriceRegistry.sol";
import {IRMN} from "../interfaces/IRMN.sol";
import {ITokenAdminRegistry} from "../interfaces/ITokenAdminRegistry.sol";
import {ILinkAvailable} from "../interfaces/automation/ILinkAvailable.sol";
import {AggregateRateLimiter} from "../AggregateRateLimiter.sol";
import {Client} from "../libraries/Client.sol";
import {Internal} from "../libraries/Internal.sol";
import {Pool} from "../libraries/Pool.sol";
import {RateLimiter} from "../libraries/RateLimiter.sol";
import {USDPriceWith18Decimals} from "../libraries/USDPriceWith18Decimals.sol";
import {IERC20} from "../../vendor/openzeppelin-solidity/v4.8.3/contracts/token/ERC20/IERC20.sol";
import {SafeERC20} from "../../vendor/openzeppelin-solidity/v4.8.3/contracts/token/ERC20/utils/SafeERC20.sol";
import {EnumerableMap} from "../../vendor/openzeppelin-solidity/v5.0.2/contracts/utils/structs/EnumerableMap.sol";
/// @notice The onRamp is a contract that handles lane-specific fee logic, NOP payments and
/// bridgeable token support.
/// @dev The EVM2EVMOnRamp, CommitStore and EVM2EVMOffRamp form an xchain upgradeable unit. Any change to one of them
/// results an onchain upgrade of all 3.
contract EVM2EVMOnRamp is IEVM2AnyOnRamp, ILinkAvailable, AggregateRateLimiter, ITypeAndVersion {
  using SafeERC20 for IERC20;
  using EnumerableMap for EnumerableMap.AddressToUintMap;
  using USDPriceWith18Decimals for uint224;
  error InvalidExtraArgsTag();
  error ExtraArgOutOfOrderExecutionMustBeTrue();
  error OnlyCallableByOwnerOrAdmin();
  error OnlyCallableByOwnerOrAdminOrNop();
  error InvalidWithdrawParams();
  error NoFeesToPay();
  error NoNopsToPay();
  error InsufficientBalance();
  error TooManyNops();
  error MaxFeeBalanceReached();
  error MessageTooLarge(uint256 maxSize, uint256 actualSize);
  error MessageGasLimitTooHigh();
  error UnsupportedNumberOfTokens();
  error UnsupportedToken(address token);
  error MustBeCalledByRouter();
  error RouterMustSetOriginalSender();
  error InvalidConfig();
  error CursedByRMN();
  error LinkBalanceNotSettled();
  error InvalidNopAddress(address nop);
  error NotAFeeToken(address token);
  error CannotSendZeroTokens();
  error SourceTokenDataTooLarge(address token);
  error InvalidChainSelector(uint64 chainSelector);
  error GetSupportedTokensFunctionalityRemovedCheckAdminRegistry();
  error InvalidDestBytesOverhead(address token, uint32 destBytesOverhead);
  event ConfigSet(StaticConfig staticConfig, DynamicConfig dynamicConfig);
  event NopPaid(address indexed nop, uint256 amount);
  event FeeConfigSet(FeeTokenConfigArgs[] feeConfig);
  event TokenTransferFeeConfigSet(TokenTransferFeeConfigArgs[] transferFeeConfig);
  event TokenTransferFeeConfigDeleted(address[] tokens);
  /// RMN depends on this event, if changing, please notify the RMN maintainers.
  event CCIPSendRequested(Internal.EVM2EVMMessage message);
  event NopsSet(uint256 nopWeightsTotal, NopAndWeight[] nopsAndWeights);
  /// @dev Struct that contains the static configuration
  /// RMN depends on this struct, if changing, please notify the RMN maintainers.
  //solhint-disable gas-struct-packing
  struct StaticConfig {
    address linkToken; // ────────╮ Link token address
    uint64 chainSelector; // ─────╯ Source chainSelector
    uint64 destChainSelector; // ─╮ Destination chainSelector
    uint64 defaultTxGasLimit; //  │ Default gas limit for a tx
    uint96 maxNopFeesJuels; // ───╯ Max nop fee balance onramp can have
    address prevOnRamp; //          Address of previous-version OnRamp
    address rmnProxy; //            Address of RMN proxy
    address tokenAdminRegistry; //  Address of the token admin registry
  }
  /// @dev Struct to contains the dynamic configuration
  struct DynamicConfig {
    address router; // ──────────────────────────╮ Router address
    uint16 maxNumberOfTokensPerMsg; //           │ Maximum number of distinct ERC20 token transferred per message
    uint32 destGasOverhead; //                   │ Gas charged on top of the gasLimit to cover destination chain costs
    uint16 destGasPerPayloadByte; //             │ Destination chain gas charged for passing each byte of `data` payload to receiver
    uint32 destDataAvailabilityOverheadGas; // ──╯ Extra data availability gas charged on top of the message, e.g. for OCR
    uint16 destGasPerDataAvailabilityByte; // ───╮ Amount of gas to charge per byte of message data that needs availability
    uint16 destDataAvailabilityMultiplierBps; // │ Multiplier for data availability gas, multiples of bps, or 0.0001
    address priceRegistry; //                    │ Price registry address
    uint32 maxDataBytes; //                      │ Maximum payload data size in bytes
    uint32 maxPerMsgGasLimit; // ────────────────╯ Maximum gas limit for messages targeting EVMs
    //                                           │
    // The following three properties are defaults, they can be overridden by setting the TokenTransferFeeConfig for a token
    uint16 defaultTokenFeeUSDCents; // ──────────╮ Default token fee charged per token transfer
    uint32 defaultTokenDestGasOverhead; //       │ Default gas charged to execute the token transfer on the destination chain
    bool enforceOutOfOrder; // ──────────────────╯ Whether to enforce the allowOutOfOrderExecution extraArg value to be true.
  }
  /// @dev Struct to hold the execution fee configuration for a fee token
  struct FeeTokenConfig {
    uint32 networkFeeUSDCents; // ─────────╮ Flat network fee to charge for messages,  multiples of 0.01 USD
    uint64 gasMultiplierWeiPerEth; //      │ Multiplier for gas costs, 1e18 based so 11e17 = 10% extra cost.
    uint64 premiumMultiplierWeiPerEth; //  │ Multiplier for fee-token-specific premiums
    bool enabled; // ──────────────────────╯ Whether this fee token is enabled
  }
  /// @dev Struct to hold the fee configuration for a fee token, same as the FeeTokenConfig but with
  /// token included so that an array of these can be passed in to setFeeTokenConfig to set the mapping
  struct FeeTokenConfigArgs {
    address token; // ─────────────────────╮ Token address
    uint32 networkFeeUSDCents; //          │ Flat network fee to charge for messages,  multiples of 0.01 USD
    uint64 gasMultiplierWeiPerEth; // ─────╯ Multiplier for gas costs, 1e18 based so 11e17 = 10% extra cost
    uint64 premiumMultiplierWeiPerEth; // ─╮ Multiplier for fee-token-specific premiums, 1e18 based
    bool enabled; // ──────────────────────╯ Whether this fee token is enabled
  }
  /// @dev Struct to hold the transfer fee configuration for token transfers
  struct TokenTransferFeeConfig {
    uint32 minFeeUSDCents; // ──────────╮ Minimum fee to charge per token transfer, multiples of 0.01 USD
    uint32 maxFeeUSDCents; //           │ Maximum fee to charge per token transfer, multiples of 0.01 USD
    uint16 deciBps; //                  │ Basis points charged on token transfers, multiples of 0.1bps, or 1e-5
    uint32 destGasOverhead; //          │ Gas charged to execute the token transfer on the destination chain
    //                                  │ Extra data availability bytes that are returned from the source pool and sent
    uint32 destBytesOverhead; //        │ to the destination pool. Must be >= Pool.CCIP_LOCK_OR_BURN_V1_RET_BYTES
    bool aggregateRateLimitEnabled; //  │ Whether this transfer token is to be included in Aggregate Rate Limiting
    bool isEnabled; // ─────────────────╯ Whether this token has custom transfer fees
  }
  /// @dev Same as TokenTransferFeeConfig
  /// token included so that an array of these can be passed in to setTokenTransferFeeConfig
  struct TokenTransferFeeConfigArgs {
    address token; // ──────────────────╮ Token address
    uint32 minFeeUSDCents; //           │ Minimum fee to charge per token transfer, multiples of 0.01 USD
    uint32 maxFeeUSDCents; //           │ Maximum fee to charge per token transfer, multiples of 0.01 USD
    uint16 deciBps; // ─────────────────╯ Basis points charged on token transfers, multiples of 0.1bps, or 1e-5
    uint32 destGasOverhead; // ─────────╮ Gas charged to execute the token transfer on the destination chain
    //                                  │ Extra data availability bytes that are returned from the source pool and sent
    uint32 destBytesOverhead; //        │ to the destination pool. Must be >= Pool.CCIP_LOCK_OR_BURN_V1_RET_BYTES
    bool aggregateRateLimitEnabled; // ─╯ Whether this transfer token is to be included in Aggregate Rate Limiting
  }
  /// @dev Nop address and weight, used to set the nops and their weights
  struct NopAndWeight {
    address nop; // ────╮ Address of the node operator
    uint16 weight; // ──╯ Weight for nop rewards
  }
  // STATIC CONFIG
  string public constant override typeAndVersion = "EVM2EVMOnRamp 1.5.0";
  /// @dev metadataHash is a lane-specific prefix for a message hash preimage which ensures global uniqueness
  /// Ensures that 2 identical messages sent to 2 different lanes will have a distinct hash.
  /// Must match the metadataHash used in computing leaf hashes offchain for the root committed in
  /// the commitStore and i_metadataHash in the offRamp.
  bytes32 internal immutable i_metadataHash;
  /// @dev Default gas limit for a transactions that did not specify
  /// a gas limit in the extraArgs.
  uint64 internal immutable i_defaultTxGasLimit;
  /// @dev Maximum nop fee that can accumulate in this onramp
  uint96 internal immutable i_maxNopFeesJuels;
  /// @dev The link token address - known to pay nops for their work
  address internal immutable i_linkToken;
  /// @dev The chain ID of the source chain that this contract is deployed to
  uint64 internal immutable i_chainSelector;
  /// @dev The chain ID of the destination chain
  uint64 internal immutable i_destChainSelector;
  /// @dev The address of previous-version OnRamp for this lane
  /// Used to be able to provide sequencing continuity during a zero downtime upgrade.
  address internal immutable i_prevOnRamp;
  /// @dev The address of the RMN proxy
  address internal immutable i_rmnProxy;
  /// @dev The address of the token admin registry
  address internal immutable i_tokenAdminRegistry;
  /// @dev the maximum number of nops that can be configured at the same time.
  /// Used to bound gas for loops over nops.
  uint256 private constant MAX_NUMBER_OF_NOPS = 64;
  // DYNAMIC CONFIG
  /// @dev The config for the onRamp
  DynamicConfig internal s_dynamicConfig;
  /// @dev (address nop => uint256 weight)
  EnumerableMap.AddressToUintMap internal s_nops;
  /// @dev The execution fee token config that can be set by the owner or fee admin
  mapping(address token => FeeTokenConfig feeTokenConfig) internal s_feeTokenConfig;
  /// @dev The token transfer fee config that can be set by the owner or fee admin
  mapping(address token => TokenTransferFeeConfig tranferFeeConfig) internal s_tokenTransferFeeConfig;
  // STATE
  /// @dev The current nonce per sender.
  /// The offramp has a corresponding s_senderNonce mapping to ensure messages
  /// are executed in the same order they are sent.
  mapping(address sender => uint64 nonce) internal s_senderNonce;
  /// @dev The amount of LINK available to pay NOPS
  uint96 internal s_nopFeesJuels;
  /// @dev The combined weight of all NOPs weights
  uint32 internal s_nopWeightsTotal;
  /// @dev The last used sequence number. This is zero in the case where no
  /// messages has been sent yet. 0 is not a valid sequence number for any
  /// real transaction.
  uint64 internal s_sequenceNumber;
  constructor(
    StaticConfig memory staticConfig,
    DynamicConfig memory dynamicConfig,
    RateLimiter.Config memory rateLimiterConfig,
    FeeTokenConfigArgs[] memory feeTokenConfigs,
    TokenTransferFeeConfigArgs[] memory tokenTransferFeeConfigArgs,
    NopAndWeight[] memory nopsAndWeights
  ) AggregateRateLimiter(rateLimiterConfig) {
    if (
      staticConfig.linkToken == address(0) || staticConfig.chainSelector == 0 || staticConfig.destChainSelector == 0
        || staticConfig.defaultTxGasLimit == 0 || staticConfig.rmnProxy == address(0)
        || staticConfig.tokenAdminRegistry == address(0)
    ) revert InvalidConfig();
    i_metadataHash = keccak256(
      abi.encode(
        Internal.EVM_2_EVM_MESSAGE_HASH, staticConfig.chainSelector, staticConfig.destChainSelector, address(this)
      )
    );
    i_linkToken = staticConfig.linkToken;
    i_chainSelector = staticConfig.chainSelector;
    i_destChainSelector = staticConfig.destChainSelector;
    i_defaultTxGasLimit = staticConfig.defaultTxGasLimit;
    i_maxNopFeesJuels = staticConfig.maxNopFeesJuels;
    i_prevOnRamp = staticConfig.prevOnRamp;
    i_rmnProxy = staticConfig.rmnProxy;
    i_tokenAdminRegistry = staticConfig.tokenAdminRegistry;
    _setDynamicConfig(dynamicConfig);
    _setFeeTokenConfig(feeTokenConfigs);
    _setTokenTransferFeeConfig(tokenTransferFeeConfigArgs, new address[](0));
    _setNops(nopsAndWeights);
  }
  // ================================================================
  // │                          Messaging                           │
  // ================================================================
  /// @inheritdoc IEVM2AnyOnRamp
  function getExpectedNextSequenceNumber() external view returns (uint64) {
    return s_sequenceNumber + 1;
  }
  /// @inheritdoc IEVM2AnyOnRamp
  function getSenderNonce(address sender) external view returns (uint64) {
    uint256 senderNonce = s_senderNonce[sender];
    if (i_prevOnRamp != address(0)) {
      if (senderNonce == 0) {
        // If OnRamp was upgraded, check if sender has a nonce from the previous OnRamp.
        return IEVM2AnyOnRamp(i_prevOnRamp).getSenderNonce(sender);
      }
    }
    return uint64(senderNonce);
  }
  /// @inheritdoc IEVM2AnyOnRampClient
  function forwardFromRouter(
    uint64 destChainSelector,
    Client.EVM2AnyMessage calldata message,
    uint256 feeTokenAmount,
    address originalSender
  ) external returns (bytes32) {
    if (IRMN(i_rmnProxy).isCursed(bytes16(uint128(destChainSelector)))) revert CursedByRMN();
    // Validate message sender is set and allowed. Not validated in `getFee` since it is not user-driven.
    if (originalSender == address(0)) revert RouterMustSetOriginalSender();
    // Router address may be zero intentionally to pause.
    if (msg.sender != s_dynamicConfig.router) revert MustBeCalledByRouter();
    if (destChainSelector != i_destChainSelector) revert InvalidChainSelector(destChainSelector);
    Client.EVMExtraArgsV2 memory extraArgs = _fromBytes(message.extraArgs);
    // Validate the message with various checks
    uint256 numberOfTokens = message.tokenAmounts.length;
    _validateMessage(message.data.length, extraArgs.gasLimit, numberOfTokens, extraArgs.allowOutOfOrderExecution);
    // Only check token value if there are tokens
    if (numberOfTokens > 0) {
      uint256 value;
      for (uint256 i = 0; i < numberOfTokens; ++i) {
        if (message.tokenAmounts[i].amount == 0) revert CannotSendZeroTokens();
        if (s_tokenTransferFeeConfig[message.tokenAmounts[i].token].aggregateRateLimitEnabled) {
          value += _getTokenValue(message.tokenAmounts[i], IPriceRegistry(s_dynamicConfig.priceRegistry));
        }
      }
      // Rate limit on aggregated token value
      if (value > 0) _rateLimitValue(value);
    }
    // Convert feeToken to link if not already in link
    if (message.feeToken == i_linkToken) {
      // Since there is only 1b link this is safe
      s_nopFeesJuels += uint96(feeTokenAmount);
    } else {
      // the cast from uint256 to uint96 is considered safe, uint96 can store more than max supply of link token
      s_nopFeesJuels += uint96(
        IPriceRegistry(s_dynamicConfig.priceRegistry).convertTokenAmount(message.feeToken, feeTokenAmount, i_linkToken)
      );
    }
    if (s_nopFeesJuels > i_maxNopFeesJuels) revert MaxFeeBalanceReached();
    // Get the current nonce if the message is an ordered message. If it's not ordered, we don't have to make the
    // external call.
    if (!extraArgs.allowOutOfOrderExecution) {
      if (i_prevOnRamp != address(0)) {
        if (s_senderNonce[originalSender] == 0) {
          // If this is first time send for a sender in new OnRamp, check if they have a nonce
          // from the previous OnRamp and start from there instead of zero.
          s_senderNonce[originalSender] = IEVM2AnyOnRamp(i_prevOnRamp).getSenderNonce(originalSender);
        }
      }
    }
    // We need the next available sequence number so we increment before we use the value
    Internal.EVM2EVMMessage memory newMessage = Internal.EVM2EVMMessage({
      sourceChainSelector: i_chainSelector,
      sender: originalSender,
      // EVM destination addresses should be abi encoded and therefore always 32 bytes long
      // Not duplicately validated in `getFee`. Invalid address is uncommon, gas cost outweighs UX gain.
      receiver: Internal._validateEVMAddress(message.receiver),
      sequenceNumber: ++s_sequenceNumber,
      gasLimit: extraArgs.gasLimit,
      strict: false,
      // Only bump nonce for messages that specify allowOutOfOrderExecution == false. Otherwise, we
      // may block ordered message nonces, which is not what we want.
      nonce: extraArgs.allowOutOfOrderExecution ? 0 : ++s_senderNonce[originalSender],
      feeToken: message.feeToken,
      feeTokenAmount: feeTokenAmount,
      data: message.data,
      tokenAmounts: message.tokenAmounts,
      sourceTokenData: new bytes[](numberOfTokens), // will be populated below
      messageId: ""
    });
    // Lock the tokens as last step. TokenPools may not always be trusted.
    // There should be no state changes after external call to TokenPools.
    for (uint256 i = 0; i < numberOfTokens; ++i) {
      Client.EVMTokenAmount memory tokenAndAmount = message.tokenAmounts[i];
      IPoolV1 sourcePool = getPoolBySourceToken(destChainSelector, IERC20(tokenAndAmount.token));
      // We don't have to check if it supports the pool version in a non-reverting way here because
      // if we revert here, there is no effect on CCIP. Therefore we directly call the supportsInterface
      // function and not through the ERC165Checker.
      if (address(sourcePool) == address(0) || !sourcePool.supportsInterface(Pool.CCIP_POOL_V1)) {
        revert UnsupportedToken(tokenAndAmount.token);
      }
      Pool.LockOrBurnOutV1 memory poolReturnData = sourcePool.lockOrBurn(
        Pool.LockOrBurnInV1({
          receiver: message.receiver,
          remoteChainSelector: i_destChainSelector,
          originalSender: originalSender,
          amount: tokenAndAmount.amount,
          localToken: tokenAndAmount.token
        })
      );
      // Since the DON has to pay for the extraData to be included on the destination chain, we cap the length of the
      // extraData. This prevents gas bomb attacks on the NOPs. As destBytesOverhead accounts for both
      // extraData and offchainData, this caps the worst case abuse to the number of bytes reserved for offchainData.
      if (poolReturnData.destPoolData.length > Pool.CCIP_LOCK_OR_BURN_V1_RET_BYTES) {
        // If TokenTransferFeeConfig.enabled is false, there is no config. That means destBytesOverhead is zero and
        // this check is always true. That ensures that a pool without config cannot send more than
        // Pool.CCIP_LOCK_OR_BURN_V1_RET_BYTES bytes of data.
        if (poolReturnData.destPoolData.length > s_tokenTransferFeeConfig[tokenAndAmount.token].destBytesOverhead) {
          revert SourceTokenDataTooLarge(tokenAndAmount.token);
        }
      }
      // We validate the token address to ensure it is a valid EVM address
      Internal._validateEVMAddress(poolReturnData.destTokenAddress);
      newMessage.sourceTokenData[i] = abi.encode(
        Internal.SourceTokenData({
          sourcePoolAddress: abi.encode(sourcePool),
          destTokenAddress: poolReturnData.destTokenAddress,
          extraData: poolReturnData.destPoolData,
          // The user will be billed either the default or the override, so we send the exact amount that we billed for
          // to the destination chain to be used for the token releaseOrMint and transfer.
          destGasAmount: s_tokenTransferFeeConfig[tokenAndAmount.token].isEnabled
            ? s_tokenTransferFeeConfig[tokenAndAmount.token].destGasOverhead
            : s_dynamicConfig.defaultTokenDestGasOverhead
        })
      );
    }
    // Hash only after the sourceTokenData has been set
    newMessage.messageId = Internal._hash(newMessage, i_metadataHash);
    // Emit message request
    // This must happen after any pool events as some tokens (e.g. USDC) emit events that we expect to precede this
    // event in the offchain code.
    emit CCIPSendRequested(newMessage);
    return newMessage.messageId;
  }
  /// @dev Convert the extra args bytes into a struct
  /// @param extraArgs The extra args bytes
  /// @return The extra args struct
  function _fromBytes(bytes calldata extraArgs) internal view returns (Client.EVMExtraArgsV2 memory) {
    if (extraArgs.length == 0) {
      return Client.EVMExtraArgsV2({gasLimit: i_defaultTxGasLimit, allowOutOfOrderExecution: false});
    }
    bytes4 extraArgsTag = bytes4(extraArgs);
    if (extraArgsTag == Client.EVM_EXTRA_ARGS_V2_TAG) {
      return abi.decode(extraArgs[4:], (Client.EVMExtraArgsV2));
    } else if (extraArgsTag == Client.EVM_EXTRA_ARGS_V1_TAG) {
      // EVMExtraArgsV1 originally included a second boolean (strict) field which has been deprecated.
      // Clients may still include it but it will be ignored.
      return Client.EVMExtraArgsV2({gasLimit: abi.decode(extraArgs[4:], (uint256)), allowOutOfOrderExecution: false});
    }
    revert InvalidExtraArgsTag();
  }
  /// @notice Validate the forwarded message with various checks.
  /// @dev This function can be called multiple times during a CCIPSend,
  /// only common user-driven mistakes are validated here to minimize duplicate validation cost.
  /// @param dataLength The length of the data field of the message.
  /// @param gasLimit The gasLimit set in message for destination execution.
  /// @param numberOfTokens The number of tokens to be sent.
  function _validateMessage(
    uint256 dataLength,
    uint256 gasLimit,
    uint256 numberOfTokens,
    bool allowOutOfOrderExecution
  ) internal view {
    uint256 maxDataBytes = uint256(s_dynamicConfig.maxDataBytes);
    if (dataLength > maxDataBytes) revert MessageTooLarge(maxDataBytes, dataLength);
    if (gasLimit > uint256(s_dynamicConfig.maxPerMsgGasLimit)) revert MessageGasLimitTooHigh();
    if (numberOfTokens > uint256(s_dynamicConfig.maxNumberOfTokensPerMsg)) revert UnsupportedNumberOfTokens();
    if (!allowOutOfOrderExecution) {
      if (s_dynamicConfig.enforceOutOfOrder) {
        revert ExtraArgOutOfOrderExecutionMustBeTrue();
      }
    }
  }
  // ================================================================
  // │                           Config                             │
  // ================================================================
  /// @notice Returns the static onRamp config.
  /// @dev RMN depends on this function, if changing, please notify the RMN maintainers.
  /// @return the configuration.
  function getStaticConfig() external view returns (StaticConfig memory) {
    return StaticConfig({
      linkToken: i_linkToken,
      chainSelector: i_chainSelector,
      destChainSelector: i_destChainSelector,
      defaultTxGasLimit: i_defaultTxGasLimit,
      maxNopFeesJuels: i_maxNopFeesJuels,
      prevOnRamp: i_prevOnRamp,
      rmnProxy: i_rmnProxy,
      tokenAdminRegistry: i_tokenAdminRegistry
    });
  }
  /// @notice Returns the dynamic onRamp config.
  /// @return dynamicConfig the configuration.
  function getDynamicConfig() external view returns (DynamicConfig memory dynamicConfig) {
    return s_dynamicConfig;
  }
  /// @notice Sets the dynamic configuration.
  /// @param dynamicConfig The configuration.
  function setDynamicConfig(DynamicConfig memory dynamicConfig) external onlyOwner {
    _setDynamicConfig(dynamicConfig);
  }
  /// @notice Internal version of setDynamicConfig to allow for reuse in the constructor.
  function _setDynamicConfig(DynamicConfig memory dynamicConfig) internal {
    // We permit router to be set to zero as a way to pause the contract.
    if (dynamicConfig.priceRegistry == address(0)) revert InvalidConfig();
    s_dynamicConfig = dynamicConfig;
    emit ConfigSet(
      StaticConfig({
        linkToken: i_linkToken,
        chainSelector: i_chainSelector,
        destChainSelector: i_destChainSelector,
        defaultTxGasLimit: i_defaultTxGasLimit,
        maxNopFeesJuels: i_maxNopFeesJuels,
        prevOnRamp: i_prevOnRamp,
        rmnProxy: i_rmnProxy,
        tokenAdminRegistry: i_tokenAdminRegistry
      }),
      dynamicConfig
    );
  }
  // ================================================================
  // │                      Tokens and pools                        │
  // ================================================================
  /// @inheritdoc IEVM2AnyOnRampClient
  function getPoolBySourceToken(uint64, /*destChainSelector*/ IERC20 sourceToken) public view returns (IPoolV1) {
    return IPoolV1(ITokenAdminRegistry(i_tokenAdminRegistry).getPool(address(sourceToken)));
  }
  /// @inheritdoc IEVM2AnyOnRampClient
  function getSupportedTokens(uint64) external pure returns (address[] memory) {
    revert GetSupportedTokensFunctionalityRemovedCheckAdminRegistry();
  }
  // ================================================================
  // │                             Fees                             │
  // ================================================================
  /// @inheritdoc IEVM2AnyOnRampClient
  /// @dev getFee MUST revert if the feeToken is not listed in the fee token config, as the router assumes it does.
  /// @param destChainSelector The destination chain selector.
  /// @param message The message to get quote for.
  /// @return feeTokenAmount The amount of fee token needed for the fee, in smallest denomination of the fee token.
  function getFee(
    uint64 destChainSelector,
    Client.EVM2AnyMessage calldata message
  ) external view returns (uint256 feeTokenAmount) {
    if (destChainSelector != i_destChainSelector) revert InvalidChainSelector(destChainSelector);
    Client.EVMExtraArgsV2 memory extraArgs = _fromBytes(message.extraArgs);
    // Validate the message with various checks
    _validateMessage(
      message.data.length, extraArgs.gasLimit, message.tokenAmounts.length, extraArgs.allowOutOfOrderExecution
    );
    FeeTokenConfig memory feeTokenConfig = s_feeTokenConfig[message.feeToken];
    if (!feeTokenConfig.enabled) revert NotAFeeToken(message.feeToken);
    (uint224 feeTokenPrice, uint224 packedGasPrice) =
      IPriceRegistry(s_dynamicConfig.priceRegistry).getTokenAndGasPrices(message.feeToken, destChainSelector);
    // Calculate premiumFee in USD with 18 decimals precision first.
    // If message-only and no token transfers, a flat network fee is charged.
    // If there are token transfers, premiumFee is calculated from token transfer fee.
    // If there are both token transfers and message, premiumFee is only calculated from token transfer fee.
    uint256 premiumFee = 0;
    uint32 tokenTransferGas = 0;
    uint32 tokenTransferBytesOverhead = 0;
    if (message.tokenAmounts.length > 0) {
      (premiumFee, tokenTransferGas, tokenTransferBytesOverhead) =
        _getTokenTransferCost(message.feeToken, feeTokenPrice, message.tokenAmounts);
    } else {
      // Convert USD cents with 2 decimals to 18 decimals.
      premiumFee = uint256(feeTokenConfig.networkFeeUSDCents) * 1e16;
    }
    // Calculate data availability cost in USD with 36 decimals. Data availability cost exists on rollups that need to post
    // transaction calldata onto another storage layer, e.g. Eth mainnet, incurring additional storage gas costs.
    uint256 dataAvailabilityCost = 0;
    // Only calculate data availability cost if data availability multiplier is non-zero.
    // The multiplier should be set to 0 if destination chain does not charge data availability cost.
    if (s_dynamicConfig.destDataAvailabilityMultiplierBps > 0) {
      dataAvailabilityCost = _getDataAvailabilityCost(
        // Parse the data availability gas price stored in the higher-order 112 bits of the encoded gas price.
        uint112(packedGasPrice >> Internal.GAS_PRICE_BITS),
        message.data.length,
        message.tokenAmounts.length,
        tokenTransferBytesOverhead
      );
    }
    // Calculate execution gas fee on destination chain in USD with 36 decimals.
    // We add the message gas limit, the overhead gas, the gas of passing message data to receiver, and token transfer gas together.
    // We then multiply this gas total with the gas multiplier and gas price, converting it into USD with 36 decimals.
    // uint112(packedGasPrice) = executionGasPrice
    uint256 executionCost = uint112(packedGasPrice)
      * (
        extraArgs.gasLimit + s_dynamicConfig.destGasOverhead
          + (message.data.length * s_dynamicConfig.destGasPerPayloadByte) + tokenTransferGas
      ) * feeTokenConfig.gasMultiplierWeiPerEth;
    // Calculate number of fee tokens to charge.
    // Total USD fee is in 36 decimals, feeTokenPrice is in 18 decimals USD for 1e18 smallest token denominations.
    // Result of the division is the number of smallest token denominations.
    return
      ((premiumFee * feeTokenConfig.premiumMultiplierWeiPerEth) + executionCost + dataAvailabilityCost) / feeTokenPrice;
  }
  /// @notice Returns the estimated data availability cost of the message.
  /// @dev To save on gas, we use a single destGasPerDataAvailabilityByte value for both zero and non-zero bytes.
  /// @param dataAvailabilityGasPrice USD per data availability gas in 18 decimals.
  /// @param messageDataLength length of the data field in the message.
  /// @param numberOfTokens number of distinct token transfers in the message.
  /// @param tokenTransferBytesOverhead additional token transfer data passed to destination, e.g. USDC attestation.
  /// @return dataAvailabilityCostUSD36Decimal total data availability cost in USD with 36 decimals.
  function _getDataAvailabilityCost(
    uint112 dataAvailabilityGasPrice,
    uint256 messageDataLength,
    uint256 numberOfTokens,
    uint32 tokenTransferBytesOverhead
  ) internal view returns (uint256 dataAvailabilityCostUSD36Decimal) {
    // dataAvailabilityLengthBytes sums up byte lengths of fixed message fields and dynamic message fields.
    // Fixed message fields do account for the offset and length slot of the dynamic fields.
    uint256 dataAvailabilityLengthBytes = Internal.MESSAGE_FIXED_BYTES + messageDataLength
      + (numberOfTokens * Internal.MESSAGE_FIXED_BYTES_PER_TOKEN) + tokenTransferBytesOverhead;
    // destDataAvailabilityOverheadGas is a separate config value for flexibility to be updated independently of message cost.
    // Its value is determined by CCIP lane implementation, e.g. the overhead data posted for OCR.
    uint256 dataAvailabilityGas = (dataAvailabilityLengthBytes * s_dynamicConfig.destGasPerDataAvailabilityByte)
      + s_dynamicConfig.destDataAvailabilityOverheadGas;
    // dataAvailabilityGasPrice is in 18 decimals, destDataAvailabilityMultiplierBps is in 4 decimals
    // We pad 14 decimals to bring the result to 36 decimals, in line with token bps and execution fee.
    return ((dataAvailabilityGas * dataAvailabilityGasPrice) * s_dynamicConfig.destDataAvailabilityMultiplierBps) * 1e14;
  }
  /// @notice Returns the token transfer cost parameters.
  /// A basis point fee is calculated from the USD value of each token transfer.
  /// For each individual transfer, this fee is between [minFeeUSD, maxFeeUSD].
  /// Total transfer fee is the sum of each individual token transfer fee.
  /// @dev Assumes that tokenAmounts are validated to be listed tokens elsewhere.
  /// @dev Splitting one token transfer into multiple transfers is discouraged,
  /// as it will result in a transferFee equal or greater than the same amount aggregated/de-duped.
  /// @param feeToken address of the feeToken.
  /// @param feeTokenPrice price of feeToken in USD with 18 decimals.
  /// @param tokenAmounts token transfers in the message.
  /// @return tokenTransferFeeUSDWei total token transfer bps fee in USD with 18 decimals.
  /// @return tokenTransferGas total execution gas of the token transfers.
  /// @return tokenTransferBytesOverhead additional token transfer data passed to destination, e.g. USDC attestation.
  function _getTokenTransferCost(
    address feeToken,
    uint224 feeTokenPrice,
    Client.EVMTokenAmount[] calldata tokenAmounts
  ) internal view returns (uint256 tokenTransferFeeUSDWei, uint32 tokenTransferGas, uint32 tokenTransferBytesOverhead) {
    uint256 numberOfTokens = tokenAmounts.length;
    for (uint256 i = 0; i < numberOfTokens; ++i) {
      Client.EVMTokenAmount memory tokenAmount = tokenAmounts[i];
      // Validate if the token is supported, do not calculate fee for unsupported tokens.
      if (address(getPoolBySourceToken(i_destChainSelector, IERC20(tokenAmount.token))) == address(0)) {
        revert UnsupportedToken(tokenAmount.token);
      }
      TokenTransferFeeConfig memory transferFeeConfig = s_tokenTransferFeeConfig[tokenAmount.token];
      // If the token has no specific overrides configured, we use the global defaults.
      if (!transferFeeConfig.isEnabled) {
        tokenTransferFeeUSDWei += uint256(s_dynamicConfig.defaultTokenFeeUSDCents) * 1e16;
        tokenTransferGas += s_dynamicConfig.defaultTokenDestGasOverhead;
        tokenTransferBytesOverhead += Pool.CCIP_POOL_V1_RET_BYTES;
        continue;
      }
      uint256 bpsFeeUSDWei = 0;
      // Only calculate bps fee if ratio is greater than 0. Ratio of 0 means no bps fee for a token.
      // Useful for when the PriceRegistry cannot return a valid price for the token.
      if (transferFeeConfig.deciBps > 0) {
        uint224 tokenPrice = 0;
        if (tokenAmount.token != feeToken) {
          tokenPrice = IPriceRegistry(s_dynamicConfig.priceRegistry).getValidatedTokenPrice(tokenAmount.token);
        } else {
          tokenPrice = feeTokenPrice;
        }
        // Calculate token transfer value, then apply fee ratio
        // ratio represents multiples of 0.1bps, or 1e-5
        bpsFeeUSDWei = (tokenPrice._calcUSDValueFromTokenAmount(tokenAmount.amount) * transferFeeConfig.deciBps) / 1e5;
      }
      tokenTransferGas += transferFeeConfig.destGasOverhead;
      tokenTransferBytesOverhead += transferFeeConfig.destBytesOverhead;
      // Bps fees should be kept within range of [minFeeUSD, maxFeeUSD].
      // Convert USD values with 2 decimals to 18 decimals.
      uint256 minFeeUSDWei = uint256(transferFeeConfig.minFeeUSDCents) * 1e16;
      if (bpsFeeUSDWei < minFeeUSDWei) {
        tokenTransferFeeUSDWei += minFeeUSDWei;
        continue;
      }
      uint256 maxFeeUSDWei = uint256(transferFeeConfig.maxFeeUSDCents) * 1e16;
      if (bpsFeeUSDWei > maxFeeUSDWei) {
        tokenTransferFeeUSDWei += maxFeeUSDWei;
        continue;
      }
      tokenTransferFeeUSDWei += bpsFeeUSDWei;
    }
    return (tokenTransferFeeUSDWei, tokenTransferGas, tokenTransferBytesOverhead);
  }
  /// @notice Gets the fee configuration for a token
  /// @param token The token to get the fee configuration for
  /// @return feeTokenConfig FeeTokenConfig struct
  function getFeeTokenConfig(address token) external view returns (FeeTokenConfig memory feeTokenConfig) {
    return s_feeTokenConfig[token];
  }
  /// @notice Sets the fee configuration for a token
  /// @param feeTokenConfigArgs Array of FeeTokenConfigArgs structs.
  function setFeeTokenConfig(FeeTokenConfigArgs[] memory feeTokenConfigArgs) external {
    _onlyOwnerOrAdmin();
    _setFeeTokenConfig(feeTokenConfigArgs);
  }
  /// @dev Set the fee config
  /// @param feeTokenConfigArgs The fee token configs.
  function _setFeeTokenConfig(FeeTokenConfigArgs[] memory feeTokenConfigArgs) internal {
    for (uint256 i = 0; i < feeTokenConfigArgs.length; ++i) {
      FeeTokenConfigArgs memory configArg = feeTokenConfigArgs[i];
      s_feeTokenConfig[configArg.token] = FeeTokenConfig({
        networkFeeUSDCents: configArg.networkFeeUSDCents,
        gasMultiplierWeiPerEth: configArg.gasMultiplierWeiPerEth,
        premiumMultiplierWeiPerEth: configArg.premiumMultiplierWeiPerEth,
        enabled: configArg.enabled
      });
    }
    emit FeeConfigSet(feeTokenConfigArgs);
  }
  /// @notice Gets the transfer fee config for a given token.
  function getTokenTransferFeeConfig(address token)
    external
    view
    returns (TokenTransferFeeConfig memory tokenTransferFeeConfig)
  {
    return s_tokenTransferFeeConfig[token];
  }
  /// @notice Sets the transfer fee config.
  /// @dev only callable by the owner or admin.
  function setTokenTransferFeeConfig(
    TokenTransferFeeConfigArgs[] memory tokenTransferFeeConfigArgs,
    address[] memory tokensToUseDefaultFeeConfigs
  ) external {
    _onlyOwnerOrAdmin();
    _setTokenTransferFeeConfig(tokenTransferFeeConfigArgs, tokensToUseDefaultFeeConfigs);
  }
  /// @notice internal helper to set the token transfer fee config.
  function _setTokenTransferFeeConfig(
    TokenTransferFeeConfigArgs[] memory tokenTransferFeeConfigArgs,
    address[] memory tokensToUseDefaultFeeConfigs
  ) internal {
    for (uint256 i = 0; i < tokenTransferFeeConfigArgs.length; ++i) {
      TokenTransferFeeConfigArgs memory configArg = tokenTransferFeeConfigArgs[i];
      if (configArg.destBytesOverhead < Pool.CCIP_LOCK_OR_BURN_V1_RET_BYTES) {
        revert InvalidDestBytesOverhead(configArg.token, configArg.destBytesOverhead);
      }
      s_tokenTransferFeeConfig[configArg.token] = TokenTransferFeeConfig({
        minFeeUSDCents: configArg.minFeeUSDCents,
        maxFeeUSDCents: configArg.maxFeeUSDCents,
        deciBps: configArg.deciBps,
        destGasOverhead: configArg.destGasOverhead,
        destBytesOverhead: configArg.destBytesOverhead,
        aggregateRateLimitEnabled: configArg.aggregateRateLimitEnabled,
        isEnabled: true
      });
    }
    emit TokenTransferFeeConfigSet(tokenTransferFeeConfigArgs);
    // Remove the custom fee configs for the tokens that are in the tokensToUseDefaultFeeConfigs array
    for (uint256 i = 0; i < tokensToUseDefaultFeeConfigs.length; ++i) {
      delete s_tokenTransferFeeConfig[tokensToUseDefaultFeeConfigs[i]];
    }
    if (tokensToUseDefaultFeeConfigs.length > 0) {
      emit TokenTransferFeeConfigDeleted(tokensToUseDefaultFeeConfigs);
    }
  }
  // ================================================================
  // │                         NOP payments                         │
  // ================================================================
  /// @notice Get the total amount of fees to be paid to the Nops (in LINK)
  /// @return totalNopFees
  function getNopFeesJuels() external view returns (uint96) {
    return s_nopFeesJuels;
  }
  /// @notice Gets the Nops and their weights
  /// @return nopsAndWeights Array of NopAndWeight structs
  /// @return weightsTotal The sum weight of all Nops
  function getNops() external view returns (NopAndWeight[] memory nopsAndWeights, uint256 weightsTotal) {
    uint256 length = s_nops.length();
    nopsAndWeights = new NopAndWeight[](length);
    for (uint256 i = 0; i < length; ++i) {
      (address nopAddress, uint256 nopWeight) = s_nops.at(i);
      nopsAndWeights[i] = NopAndWeight({nop: nopAddress, weight: uint16(nopWeight)});
    }
    weightsTotal = s_nopWeightsTotal;
    return (nopsAndWeights, weightsTotal);
  }
  /// @notice Sets the Nops and their weights
  /// @param nopsAndWeights Array of NopAndWeight structs
  function setNops(NopAndWeight[] calldata nopsAndWeights) external {
    _onlyOwnerOrAdmin();
    _setNops(nopsAndWeights);
  }
  /// @param nopsAndWeights New set of nops and weights
  /// @dev Clears existing nops, sets new nops and weights
  /// @dev We permit fees to accrue before nops are configured, in which case
  /// they will go to the first set of configured nops.
  function _setNops(NopAndWeight[] memory nopsAndWeights) internal {
    uint256 numberOfNops = nopsAndWeights.length;
    if (numberOfNops > MAX_NUMBER_OF_NOPS) revert TooManyNops();
    // Make sure all nops have been paid before removing nops
    // We only have to pay when there are nops and there is enough
    // outstanding NOP balance to trigger a payment.
    if (s_nopWeightsTotal > 0) {
      if (s_nopFeesJuels >= s_nopWeightsTotal) {
        payNops();
      }
    }
    // Remove all previous nops, move from end to start to avoid shifting
    for (uint256 i = s_nops.length(); i > 0; --i) {
      (address nop,) = s_nops.at(i - 1);
      s_nops.remove(nop);
    }
    // Add new
    uint32 nopWeightsTotal = 0;
    // nopWeightsTotal is bounded by the MAX_NUMBER_OF_NOPS and the weight of
    // a single nop being of type uint16. This ensures nopWeightsTotal will
    // always fit into the uint32 type.
    for (uint256 i = 0; i < numberOfNops; ++i) {
      // Make sure the LINK token is not a nop because the link token doesn't allow
      // self transfers. If set as nop, payNops would always revert. Since setNops
      // calls payNops, we can never remove the LINK token as a nop.
      address nop = nopsAndWeights[i].nop;
      uint16 weight = nopsAndWeights[i].weight;
      if (nop == i_linkToken || nop == address(0)) revert InvalidNopAddress(nop);
      s_nops.set(nop, weight);
      nopWeightsTotal += weight;
    }
    s_nopWeightsTotal = nopWeightsTotal;
    emit NopsSet(nopWeightsTotal, nopsAndWeights);
  }
  /// @notice Pays the Node Ops their outstanding balances.
  /// @dev some balance can remain after payments are done. This is at most the sum
  /// of the weight of all nops. Since nop weights are uint16s and we can have at
  /// most MAX_NUMBER_OF_NOPS NOPs, the highest possible value is 2**22 or 0.04 gjuels.
  function payNops() public {
    if (msg.sender != owner()) {
      if (msg.sender != s_admin) {
        if (!s_nops.contains(msg.sender)) {
          revert OnlyCallableByOwnerOrAdminOrNop();
        }
      }
    }
    uint256 weightsTotal = s_nopWeightsTotal;
    if (weightsTotal == 0) revert NoNopsToPay();
    uint96 totalFeesToPay = s_nopFeesJuels;
    if (totalFeesToPay < weightsTotal) revert NoFeesToPay();
    if (linkAvailableForPayment() < 0) revert InsufficientBalance();
    uint96 fundsLeft = totalFeesToPay;
    uint256 numberOfNops = s_nops.length();
    for (uint256 i = 0; i < numberOfNops; ++i) {
      (address nop, uint256 weight) = s_nops.at(i);
      // amount can never be higher than totalFeesToPay so the cast to uint96 is safe
      uint96 amount = uint96((totalFeesToPay * weight) / weightsTotal);
      fundsLeft -= amount;
      IERC20(i_linkToken).safeTransfer(nop, amount);
      emit NopPaid(nop, amount);
    }
    // Some funds can remain, since this is an incredibly small
    // amount we consider this OK.
    s_nopFeesJuels = fundsLeft;
  }
  /// @notice Allows the owner to withdraw any ERC20 token from the contract.
  /// The NOP link balance is not withdrawable.
  /// @param feeToken The token to withdraw
  /// @param to The address to send the tokens to
  function withdrawNonLinkFees(address feeToken, address to) external {
    _onlyOwnerOrAdmin();
    if (to == address(0)) revert InvalidWithdrawParams();
    // We require the link balance to be settled before allowing withdrawal of non-link fees.
    int256 linkAfterNopFees = linkAvailableForPayment();
    if (linkAfterNopFees < 0) revert LinkBalanceNotSettled();
    if (feeToken == i_linkToken) {
      // Withdraw only the left over link balance
      IERC20(feeToken).safeTransfer(to, uint256(linkAfterNopFees));
    } else {
      // Withdrawal all non-link tokens in the contract
      IERC20(feeToken).safeTransfer(to, IERC20(feeToken).balanceOf(address(this)));
    }
  }
  // ================================================================
  // │                        Link monitoring                       │
  // ================================================================
  /// @notice Calculate remaining LINK balance after paying nops
  /// @dev Allow keeper to monitor funds available for paying nops
  /// @return balance if nops were to be paid
  function linkAvailableForPayment() public view returns (int256) {
    // Since LINK caps at uint96, casting to int256 is safe
    return int256(IERC20(i_linkToken).balanceOf(address(this))) - int256(uint256(s_nopFeesJuels));
  }
  // ================================================================
  // │                           Access                             │
  // ================================================================
  /// @dev Require that the sender is the owner or the fee admin
  /// Not a modifier to save on contract size
  function _onlyOwnerOrAdmin() internal view {
    if (msg.sender != owner()) {
      if (msg.sender != s_admin) {
        revert OnlyCallableByOwnerOrAdmin();
      }
    }
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface ITypeAndVersion {
  function typeAndVersion() external pure returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {IEVM2AnyOnRampClient} from "./IEVM2AnyOnRampClient.sol";
interface IEVM2AnyOnRamp is IEVM2AnyOnRampClient {
  /// @notice Gets the next sequence number to be used in the onRamp
  /// @return the next sequence number to be used
  function getExpectedNextSequenceNumber() external view returns (uint64);
  /// @notice Get the next nonce for a given sender
  /// @param sender The sender to get the nonce for
  /// @return nonce The next nonce for the sender
  function getSenderNonce(address sender) external view returns (uint64 nonce);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {IPoolV1} from "./IPool.sol";
import {Client} from "../libraries/Client.sol";
import {IERC20} from "../../vendor/openzeppelin-solidity/v4.8.3/contracts/token/ERC20/IERC20.sol";
interface IEVM2AnyOnRampClient {
  /// @notice Get the fee for a given ccip message
  /// @param destChainSelector The destination chain selector
  /// @param message The message to calculate the cost for
  /// @return fee The calculated fee
  function getFee(uint64 destChainSelector, Client.EVM2AnyMessage calldata message) external view returns (uint256 fee);
  /// @notice Get the pool for a specific token
  /// @param destChainSelector The destination chain selector
  /// @param sourceToken The source chain token to get the pool for
  /// @return pool Token pool
  function getPoolBySourceToken(uint64 destChainSelector, IERC20 sourceToken) external view returns (IPoolV1);
  /// @notice Gets a list of all supported source chain tokens.
  /// @param destChainSelector The destination chain selector
  /// @return tokens The addresses of all tokens that this onRamp supports the given destination chain
  function getSupportedTokens(uint64 destChainSelector) external view returns (address[] memory tokens);
  /// @notice Send a message to the remote chain
  /// @dev only callable by the Router
  /// @dev approve() must have already been called on the token using the this ramp address as the spender.
  /// @dev if the contract is paused, this function will revert.
  /// @param destChainSelector The destination chain selector
  /// @param message Message struct to send
  /// @param feeTokenAmount Amount of fee tokens for payment
  /// @param originalSender The original initiator of the CCIP request
  function forwardFromRouter(
    uint64 destChainSelector,
    Client.EVM2AnyMessage memory message,
    uint256 feeTokenAmount,
    address originalSender
  ) external returns (bytes32);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {Pool} from "../libraries/Pool.sol";
import {IERC165} from "../../vendor/openzeppelin-solidity/v5.0.2/contracts/utils/introspection/IERC165.sol";
/// @notice Shared public interface for multiple V1 pool types.
/// Each pool type handles a different child token model (lock/unlock, mint/burn.)
interface IPoolV1 is IERC165 {
  /// @notice Lock tokens into the pool or burn the tokens.
  /// @param lockOrBurnIn Encoded data fields for the processing of tokens on the source chain.
  /// @return lockOrBurnOut Encoded data fields for the processing of tokens on the destination chain.
  function lockOrBurn(Pool.LockOrBurnInV1 calldata lockOrBurnIn)
    external
    returns (Pool.LockOrBurnOutV1 memory lockOrBurnOut);
  /// @notice Releases or mints tokens to the receiver address.
  /// @param releaseOrMintIn All data required to release or mint tokens.
  /// @return releaseOrMintOut The amount of tokens released or minted on the local chain, denominated
  /// in the local token's decimals.
  /// @dev The offramp asserts that the balanceOf of the receiver has been incremented by exactly the number
  /// of tokens that is returned in ReleaseOrMintOutV1.destinationAmount. If the amounts do not match, the tx reverts.
  function releaseOrMint(Pool.ReleaseOrMintInV1 calldata releaseOrMintIn)
    external
    returns (Pool.ReleaseOrMintOutV1 memory);
  /// @notice Checks whether a remote chain is supported in the token pool.
  /// @param remoteChainSelector The selector of the remote chain.
  /// @return true if the given chain is a permissioned remote chain.
  function isSupportedChain(uint64 remoteChainSelector) external view returns (bool);
  /// @notice Returns if the token pool supports the given token.
  /// @param token The address of the token.
  /// @return true if the token is supported by the pool.
  function isSupportedToken(address token) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {Client} from "../libraries/Client.sol";
import {Internal} from "../libraries/Internal.sol";
interface IPriceRegistry {
  /// @notice Token price data feed configuration
  struct TokenPriceFeedConfig {
    address dataFeedAddress; // ──╮ AggregatorV3Interface contract (0 - feed is unset)
    uint8 tokenDecimals; // ──────╯ Decimals of the token that the feed represents
  }
  /// @notice Update the price for given tokens and gas prices for given chains.
  /// @param priceUpdates The price updates to apply.
  function updatePrices(Internal.PriceUpdates memory priceUpdates) external;
  /// @notice Get the `tokenPrice` for a given token.
  /// @param token The token to get the price for.
  /// @return tokenPrice The tokenPrice for the given token.
  function getTokenPrice(address token) external view returns (Internal.TimestampedPackedUint224 memory);
  /// @notice Get the `tokenPrice` for a given token, checks if the price is valid.
  /// @param token The token to get the price for.
  /// @return tokenPrice The tokenPrice for the given token if it exists and is valid.
  function getValidatedTokenPrice(address token) external view returns (uint224);
  /// @notice Get the `tokenPrice` for an array of tokens.
  /// @param tokens The tokens to get prices for.
  /// @return tokenPrices The tokenPrices for the given tokens.
  function getTokenPrices(address[] calldata tokens) external view returns (Internal.TimestampedPackedUint224[] memory);
  /// @notice Returns the token price data feed configuration
  /// @param token The token to retrieve the feed config for
  /// @return dataFeedAddress The token price data feed config (if feed address is 0, the feed config is disabled)
  function getTokenPriceFeedConfig(address token) external view returns (TokenPriceFeedConfig memory);
  /// @notice Get an encoded `gasPrice` for a given destination chain ID.
  /// The 224-bit result encodes necessary gas price components.
  /// On L1 chains like Ethereum or Avax, the only component is the gas price.
  /// On Optimistic Rollups, there are two components - the L2 gas price, and L1 base fee for data availability.
  /// On future chains, there could be more or differing price components.
  /// PriceRegistry does not contain chain-specific logic to parse destination chain price components.
  /// @param destChainSelector The destination chain to get the price for.
  /// @return gasPrice The encoded gasPrice for the given destination chain ID.
  function getDestinationChainGasPrice(uint64 destChainSelector)
    external
    view
    returns (Internal.TimestampedPackedUint224 memory);
  /// @notice Gets the fee token price and the gas price, both denominated in dollars.
  /// @param token The source token to get the price for.
  /// @param destChainSelector The destination chain to get the gas price for.
  /// @return tokenPrice The price of the feeToken in 1e18 dollars per base unit.
  /// @return gasPrice The price of gas in 1e18 dollars per base unit.
  function getTokenAndGasPrices(
    address token,
    uint64 destChainSelector
  ) external view returns (uint224 tokenPrice, uint224 gasPrice);
  /// @notice Convert a given token amount to target token amount.
  /// @param fromToken The given token address.
  /// @param fromTokenAmount The given token amount.
  /// @param toToken The target token address.
  /// @return toTokenAmount The target token amount.
  function convertTokenAmount(
    address fromToken,
    uint256 fromTokenAmount,
    address toToken
  ) external view returns (uint256 toTokenAmount);
  /// @notice Get the list of fee tokens.
  /// @return The tokens set as fee tokens.
  function getFeeTokens() external view returns (address[] memory);
  /// @notice Validates the ccip message & returns the fee
  /// @param destChainSelector The destination chain selector.
  /// @param message The message to get quote for.
  /// @return feeTokenAmount The amount of fee token needed for the fee, in smallest denomination of the fee token.
  function getValidatedFee(
    uint64 destChainSelector,
    Client.EVM2AnyMessage calldata message
  ) external view returns (uint256 feeTokenAmount);
  /// @notice Converts the extraArgs to the latest version and returns the converted message fee in juels
  /// @param destChainSelector destination chain selector to process
  /// @param feeToken Fee token address used to pay for message fees
  /// @param feeTokenAmount Fee token amount
  /// @param extraArgs Message extra args that were passed in by the client
  /// @return msgFeeJuels message fee in juels
  /// @return isOutOfOrderExecution true if the message should be executed out of order
  /// @return convertedExtraArgs extra args converted to the latest family-specific args version
  function processMessageArgs(
    uint64 destChainSelector,
    address feeToken,
    uint256 feeTokenAmount,
    bytes memory extraArgs
  ) external view returns (uint256 msgFeeJuels, bool isOutOfOrderExecution, bytes memory convertedExtraArgs);
  /// @notice Validates pool return data
  /// @param destChainSelector Destination chain selector to which the token amounts are sent to
  /// @param rampTokenAmounts Token amounts with populated pool return data
  /// @param sourceTokenAmounts Token amounts originally sent in a Client.EVM2AnyMessage message
  function validatePoolReturnData(
    uint64 destChainSelector,
    Internal.RampTokenAmount[] calldata rampTokenAmounts,
    Client.EVMTokenAmount[] calldata sourceTokenAmounts
  ) external view;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @notice This interface contains the only RMN-related functions that might be used on-chain by other CCIP contracts.
interface IRMN {
  /// @notice A Merkle root tagged with the address of the commit store contract it is destined for.
  struct TaggedRoot {
    address commitStore;
    bytes32 root;
  }
  /// @notice Callers MUST NOT cache the return value as a blessed tagged root could become unblessed.
  function isBlessed(TaggedRoot calldata taggedRoot) external view returns (bool);
  /// @notice Iff there is an active global or legacy curse, this function returns true.
  function isCursed() external view returns (bool);
  /// @notice Iff there is an active global curse, or an active curse for `subject`, this function returns true.
  /// @param subject To check whether a particular chain is cursed, set to bytes16(uint128(chainSelector)).
  function isCursed(bytes16 subject) external view returns (bool);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
interface ITokenAdminRegistry {
  /// @notice Returns the pool for the given token.
  function getPool(address token) external view returns (address);
  /// @notice Proposes an administrator for the given token as pending administrator.
  /// @param localToken The token to register the administrator for.
  /// @param administrator The administrator to register.
  function proposeAdministrator(address localToken, address administrator) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @notice Implement this contract so that a keeper-compatible contract can monitor
/// and fund the implementation contract with LINK if it falls below a defined threshold.
interface ILinkAvailable {
  function linkAvailableForPayment() external view returns (int256 availableBalance);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.24;
import {IPriceRegistry} from "./interfaces/IPriceRegistry.sol";
import {OwnerIsCreator} from "./../shared/access/OwnerIsCreator.sol";
import {Client} from "./libraries/Client.sol";
import {RateLimiter} from "./libraries/RateLimiter.sol";
import {USDPriceWith18Decimals} from "./libraries/USDPriceWith18Decimals.sol";
/// @notice The aggregate rate limiter is a wrapper of the token bucket rate limiter
/// which permits rate limiting based on the aggregate value of a group of
/// token transfers, using a price registry to convert to a numeraire asset (e.g. USD).
contract AggregateRateLimiter is OwnerIsCreator {
  using RateLimiter for RateLimiter.TokenBucket;
  using USDPriceWith18Decimals for uint224;
  error PriceNotFoundForToken(address token);
  event AdminSet(address newAdmin);
  // The address of the token limit admin that has the same permissions as the owner.
  address internal s_admin;
  // The token bucket object that contains the bucket state.
  RateLimiter.TokenBucket private s_rateLimiter;
  /// @param config The RateLimiter.Config
  constructor(RateLimiter.Config memory config) {
    s_rateLimiter = RateLimiter.TokenBucket({
      rate: config.rate,
      capacity: config.capacity,
      tokens: config.capacity,
      lastUpdated: uint32(block.timestamp),
      isEnabled: config.isEnabled
    });
  }
  /// @notice Consumes value from the rate limiter bucket based on the token value given.
  function _rateLimitValue(uint256 value) internal {
    s_rateLimiter._consume(value, address(0));
  }
  function _getTokenValue(
    Client.EVMTokenAmount memory tokenAmount,
    IPriceRegistry priceRegistry
  ) internal view returns (uint256) {
    // not fetching validated price, as price staleness is not important for value-based rate limiting
    // we only need to verify the price is not 0
    uint224 pricePerToken = priceRegistry.getTokenPrice(tokenAmount.token).value;
    if (pricePerToken == 0) revert PriceNotFoundForToken(tokenAmount.token);
    return pricePerToken._calcUSDValueFromTokenAmount(tokenAmount.amount);
  }
  /// @notice Gets the token bucket with its values for the block it was requested at.
  /// @return The token bucket.
  function currentRateLimiterState() external view returns (RateLimiter.TokenBucket memory) {
    return s_rateLimiter._currentTokenBucketState();
  }
  /// @notice Sets the rate limited config.
  /// @param config The new rate limiter config.
  /// @dev should only be callable by the owner or token limit admin.
  function setRateLimiterConfig(RateLimiter.Config memory config) external onlyAdminOrOwner {
    s_rateLimiter._setTokenBucketConfig(config);
  }
  // ================================================================
  // │                           Access                             │
  // ================================================================
  /// @notice Gets the token limit admin address.
  /// @return the token limit admin address.
  function getTokenLimitAdmin() external view returns (address) {
    return s_admin;
  }
  /// @notice Sets the token limit admin address.
  /// @param newAdmin the address of the new admin.
  /// @dev setting this to address(0) indicates there is no active admin.
  function setAdmin(address newAdmin) external onlyAdminOrOwner {
    s_admin = newAdmin;
    emit AdminSet(newAdmin);
  }
  /// @notice a modifier that allows the owner or the s_tokenLimitAdmin call the functions
  /// it is applied to.
  modifier onlyAdminOrOwner() {
    if (msg.sender != owner() && msg.sender != s_admin) revert RateLimiter.OnlyCallableByAdminOrOwner();
    _;
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
// End consumer library.
library Client {
  /// @dev RMN depends on this struct, if changing, please notify the RMN maintainers.
  struct EVMTokenAmount {
    address token; // token address on the local chain.
    uint256 amount; // Amount of tokens.
  }
  struct Any2EVMMessage {
    bytes32 messageId; // MessageId corresponding to ccipSend on source.
    uint64 sourceChainSelector; // Source chain selector.
    bytes sender; // abi.decode(sender) if coming from an EVM chain.
    bytes data; // payload sent in original message.
    EVMTokenAmount[] destTokenAmounts; // Tokens and their amounts in their destination chain representation.
  }
  // If extraArgs is empty bytes, the default is 200k gas limit.
  struct EVM2AnyMessage {
    bytes receiver; // abi.encode(receiver address) for dest EVM chains
    bytes data; // Data payload
    EVMTokenAmount[] tokenAmounts; // Token transfers
    address feeToken; // Address of feeToken. address(0) means you will send msg.value.
    bytes extraArgs; // Populate this with _argsToBytes(EVMExtraArgsV2)
  }
  // bytes4(keccak256("CCIP EVMExtraArgsV1"));
  bytes4 public constant EVM_EXTRA_ARGS_V1_TAG = 0x97a657c9;
  struct EVMExtraArgsV1 {
    uint256 gasLimit;
  }
  function _argsToBytes(EVMExtraArgsV1 memory extraArgs) internal pure returns (bytes memory bts) {
    return abi.encodeWithSelector(EVM_EXTRA_ARGS_V1_TAG, extraArgs);
  }
  // bytes4(keccak256("CCIP EVMExtraArgsV2"));
  bytes4 public constant EVM_EXTRA_ARGS_V2_TAG = 0x181dcf10;
  /// @param gasLimit: gas limit for the callback on the destination chain.
  /// @param allowOutOfOrderExecution: if true, it indicates that the message can be executed in any order relative to other messages from the same sender.
  /// This value's default varies by chain. On some chains, a particular value is enforced, meaning if the expected value
  /// is not set, the message request will revert.
  struct EVMExtraArgsV2 {
    uint256 gasLimit;
    bool allowOutOfOrderExecution;
  }
  function _argsToBytes(EVMExtraArgsV2 memory extraArgs) internal pure returns (bytes memory bts) {
    return abi.encodeWithSelector(EVM_EXTRA_ARGS_V2_TAG, extraArgs);
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {MerkleMultiProof} from "../libraries/MerkleMultiProof.sol";
import {Client} from "./Client.sol";
// Library for CCIP internal definitions common to multiple contracts.
library Internal {
  error InvalidEVMAddress(bytes encodedAddress);
  /// @dev The minimum amount of gas to perform the call with exact gas.
  /// We include this in the offramp so that we can redeploy to adjust it
  /// should a hardfork change the gas costs of relevant opcodes in callWithExactGas.
  uint16 internal constant GAS_FOR_CALL_EXACT_CHECK = 5_000;
  // @dev We limit return data to a selector plus 4 words. This is to avoid
  // malicious contracts from returning large amounts of data and causing
  // repeated out-of-gas scenarios.
  uint16 internal constant MAX_RET_BYTES = 4 + 4 * 32;
  /// @dev The expected number of bytes returned by the balanceOf function.
  uint256 internal constant MAX_BALANCE_OF_RET_BYTES = 32;
  /// @notice A collection of token price and gas price updates.
  /// @dev RMN depends on this struct, if changing, please notify the RMN maintainers.
  struct PriceUpdates {
    TokenPriceUpdate[] tokenPriceUpdates;
    GasPriceUpdate[] gasPriceUpdates;
  }
  /// @notice Token price in USD.
  /// @dev RMN depends on this struct, if changing, please notify the RMN maintainers.
  struct TokenPriceUpdate {
    address sourceToken; // Source token
    uint224 usdPerToken; // 1e18 USD per 1e18 of the smallest token denomination.
  }
  /// @notice Gas price for a given chain in USD, its value may contain tightly packed fields.
  /// @dev RMN depends on this struct, if changing, please notify the RMN maintainers.
  struct GasPriceUpdate {
    uint64 destChainSelector; // Destination chain selector
    uint224 usdPerUnitGas; // 1e18 USD per smallest unit (e.g. wei) of destination chain gas
  }
  /// @notice A timestamped uint224 value that can contain several tightly packed fields.
  struct TimestampedPackedUint224 {
    uint224 value; // ───────╮ Value in uint224, packed.
    uint32 timestamp; // ────╯ Timestamp of the most recent price update.
  }
  /// @dev Gas price is stored in 112-bit unsigned int. uint224 can pack 2 prices.
  /// When packing L1 and L2 gas prices, L1 gas price is left-shifted to the higher-order bits.
  /// Using uint8 type, which cannot be higher than other bit shift operands, to avoid shift operand type warning.
  uint8 public constant GAS_PRICE_BITS = 112;
  struct PoolUpdate {
    address token; // The IERC20 token address
    address pool; // The token pool address
  }
  struct SourceTokenData {
    // The source pool address, abi encoded. This value is trusted as it was obtained through the onRamp. It can be
    // relied upon by the destination pool to validate the source pool.
    bytes sourcePoolAddress;
    // The address of the destination token, abi encoded in the case of EVM chains
    // This value is UNTRUSTED as any pool owner can return whatever value they want.
    bytes destTokenAddress;
    // Optional pool data to be transferred to the destination chain. Be default this is capped at
    // CCIP_LOCK_OR_BURN_V1_RET_BYTES bytes. If more data is required, the TokenTransferFeeConfig.destBytesOverhead
    // has to be set for the specific token.
    bytes extraData;
    uint32 destGasAmount; // The amount of gas available for the releaseOrMint and balanceOf calls on the offRamp
  }
  /// @notice Report that is submitted by the execution DON at the execution phase. (including chain selector data)
  /// @dev RMN depends on this struct, if changing, please notify the RMN maintainers.
  struct ExecutionReportSingleChain {
    uint64 sourceChainSelector; // Source chain selector for which the report is submitted
    Any2EVMRampMessage[] messages;
    // Contains a bytes array for each message, each inner bytes array contains bytes per transferred token
    bytes[][] offchainTokenData;
    bytes32[] proofs;
    uint256 proofFlagBits;
  }
  /// @notice Report that is submitted by the execution DON at the execution phase.
  /// @dev RMN depends on this struct, if changing, please notify the RMN maintainers.
  struct ExecutionReport {
    EVM2EVMMessage[] messages;
    // Contains a bytes array for each message, each inner bytes array contains bytes per transferred token
    bytes[][] offchainTokenData;
    bytes32[] proofs;
    uint256 proofFlagBits;
  }
  /// @notice The cross chain message that gets committed to EVM chains.
  /// @dev RMN depends on this struct, if changing, please notify the RMN maintainers.
  struct EVM2EVMMessage {
    uint64 sourceChainSelector; // ────────╮ the chain selector of the source chain, note: not chainId
    address sender; // ────────────────────╯ sender address on the source chain
    address receiver; // ──────────────────╮ receiver address on the destination chain
    uint64 sequenceNumber; // ─────────────╯ sequence number, not unique across lanes
    uint256 gasLimit; //                     user supplied maximum gas amount available for dest chain execution
    bool strict; // ───────────────────────╮ DEPRECATED
    uint64 nonce; //                       │ nonce for this lane for this sender, not unique across senders/lanes
    address feeToken; // ──────────────────╯ fee token
    uint256 feeTokenAmount; //               fee token amount
    bytes data; //                           arbitrary data payload supplied by the message sender
    Client.EVMTokenAmount[] tokenAmounts; // array of tokens and amounts to transfer
    bytes[] sourceTokenData; //              array of token data, one per token
    bytes32 messageId; //                    a hash of the message data
  }
  /// @dev EVM2EVMMessage struct has 13 fields, including 3 variable arrays.
  /// Each variable array takes 1 more slot to store its length.
  /// When abi encoded, excluding array contents,
  /// EVM2EVMMessage takes up a fixed number of 16 lots, 32 bytes each.
  /// For structs that contain arrays, 1 more slot is added to the front, reaching a total of 17.
  uint256 public constant MESSAGE_FIXED_BYTES = 32 * 17;
  /// @dev Each token transfer adds 1 EVMTokenAmount and 3 bytes at 3 slots each and one slot for the destGasAmount.
  /// When abi encoded, each EVMTokenAmount takes 2 slots, each bytes takes 1 slot for length, one slot of data and one
  /// slot for the offset. This results in effectively 3*3 slots per SourceTokenData.
  /// 0x20
  /// destGasAmount
  /// sourcePoolAddress_offset
  /// destTokenAddress_offset
  /// extraData_offset
  /// sourcePoolAddress_length
  /// sourcePoolAddress_content // assume 1 slot
  /// destTokenAddress_length
  /// destTokenAddress_content // assume 1 slot
  /// extraData_length // contents billed separately
  uint256 public constant MESSAGE_FIXED_BYTES_PER_TOKEN = 32 * ((1 + 3 * 3) + 2);
  /// @dev Any2EVMRampMessage struct has 10 fields, including 3 variable unnested arrays (data, receiver and tokenAmounts).
  /// Each variable array takes 1 more slot to store its length.
  /// When abi encoded, excluding array contents,
  /// Any2EVMMessage takes up a fixed number of 13 slots, 32 bytes each.
  /// For structs that contain arrays, 1 more slot is added to the front, reaching a total of 14.
  /// The fixed bytes does not cover struct data (this is represented by ANY_2_EVM_MESSAGE_FIXED_BYTES_PER_TOKEN)
  uint256 public constant ANY_2_EVM_MESSAGE_FIXED_BYTES = 32 * 14;
  /// @dev Each token transfer adds 1 RampTokenAmount
  /// RampTokenAmount has 4 fields, including 3 bytes.
  /// Each bytes takes 1 more slot to store its length, and one slot to store the offset.
  /// When abi encoded, each token transfer takes up 10 slots, excl bytes contents.
  uint256 public constant ANY_2_EVM_MESSAGE_FIXED_BYTES_PER_TOKEN = 32 * 10;
  bytes32 internal constant EVM_2_EVM_MESSAGE_HASH = keccak256("EVM2EVMMessageHashV2");
  /// @dev Used to hash messages for single-lane ramps.
  /// OnRamp hash(EVM2EVMMessage) = OffRamp hash(EVM2EVMMessage)
  /// The EVM2EVMMessage's messageId is expected to be the output of this hash function
  /// @param original Message to hash
  /// @param metadataHash Immutable metadata hash representing a lane with a fixed OnRamp
  /// @return hashedMessage hashed message as a keccak256
  function _hash(EVM2EVMMessage memory original, bytes32 metadataHash) internal pure returns (bytes32) {
    // Fixed-size message fields are included in nested hash to reduce stack pressure.
    // This hashing scheme is also used by RMN. If changing it, please notify the RMN maintainers.
    return keccak256(
      abi.encode(
        MerkleMultiProof.LEAF_DOMAIN_SEPARATOR,
        metadataHash,
        keccak256(
          abi.encode(
            original.sender,
            original.receiver,
            original.sequenceNumber,
            original.gasLimit,
            original.strict,
            original.nonce,
            original.feeToken,
            original.feeTokenAmount
          )
        ),
        keccak256(original.data),
        keccak256(abi.encode(original.tokenAmounts)),
        keccak256(abi.encode(original.sourceTokenData))
      )
    );
  }
  bytes32 internal constant ANY_2_EVM_MESSAGE_HASH = keccak256("Any2EVMMessageHashV1");
  bytes32 internal constant EVM_2_ANY_MESSAGE_HASH = keccak256("EVM2AnyMessageHashV1");
  /// @dev Used to hash messages for multi-lane family-agnostic OffRamps.
  /// OnRamp hash(EVM2AnyMessage) != Any2EVMRampMessage.messageId
  /// OnRamp hash(EVM2AnyMessage) != OffRamp hash(Any2EVMRampMessage)
  /// @param original OffRamp message to hash
  /// @param onRamp OnRamp to hash the message with - used to compute the metadataHash
  /// @return hashedMessage hashed message as a keccak256
  function _hash(Any2EVMRampMessage memory original, bytes memory onRamp) internal pure returns (bytes32) {
    // Fixed-size message fields are included in nested hash to reduce stack pressure.
    // This hashing scheme is also used by RMN. If changing it, please notify the RMN maintainers.
    return keccak256(
      abi.encode(
        MerkleMultiProof.LEAF_DOMAIN_SEPARATOR,
        // Implicit metadata hash
        keccak256(
          abi.encode(
            ANY_2_EVM_MESSAGE_HASH, original.header.sourceChainSelector, original.header.destChainSelector, onRamp
          )
        ),
        keccak256(
          abi.encode(
            original.header.messageId,
            original.sender,
            original.receiver,
            original.header.sequenceNumber,
            original.gasLimit,
            original.header.nonce
          )
        ),
        keccak256(original.data),
        keccak256(abi.encode(original.tokenAmounts))
      )
    );
  }
  function _hash(EVM2AnyRampMessage memory original, bytes32 metadataHash) internal pure returns (bytes32) {
    // Fixed-size message fields are included in nested hash to reduce stack pressure.
    // This hashing scheme is also used by RMN. If changing it, please notify the RMN maintainers.
    return keccak256(
      abi.encode(
        MerkleMultiProof.LEAF_DOMAIN_SEPARATOR,
        metadataHash,
        keccak256(
          abi.encode(
            original.sender,
            original.receiver,
            original.header.sequenceNumber,
            original.header.nonce,
            original.feeToken,
            original.feeTokenAmount
          )
        ),
        keccak256(original.data),
        keccak256(abi.encode(original.tokenAmounts)),
        keccak256(original.extraArgs)
      )
    );
  }
  /// @dev We disallow the first 1024 addresses to avoid calling into a range known for hosting precompiles. Calling
  /// into precompiles probably won't cause any issues, but to be safe we can disallow this range. It is extremely
  /// unlikely that anyone would ever be able to generate an address in this range. There is no official range of
  /// precompiles, but EIP-7587 proposes to reserve the range 0x100 to 0x1ff. Our range is more conservative, even
  /// though it might not be exhaustive for all chains, which is OK. We also disallow the zero address, which is a
  /// common practice.
  uint256 public constant PRECOMPILE_SPACE = 1024;
  /// @notice This methods provides validation for parsing abi encoded addresses by ensuring the
  /// address is within the EVM address space. If it isn't it will revert with an InvalidEVMAddress error, which
  /// we can catch and handle more gracefully than a revert from abi.decode.
  /// @return The address if it is valid, the function will revert otherwise.
  function _validateEVMAddress(bytes memory encodedAddress) internal pure returns (address) {
    if (encodedAddress.length != 32) revert InvalidEVMAddress(encodedAddress);
    uint256 encodedAddressUint = abi.decode(encodedAddress, (uint256));
    if (encodedAddressUint > type(uint160).max || encodedAddressUint < PRECOMPILE_SPACE) {
      revert InvalidEVMAddress(encodedAddress);
    }
    return address(uint160(encodedAddressUint));
  }
  /// @notice Enum listing the possible message execution states within
  /// the offRamp contract.
  /// UNTOUCHED never executed
  /// IN_PROGRESS currently being executed, used a replay protection
  /// SUCCESS successfully executed. End state
  /// FAILURE unsuccessfully executed, manual execution is now enabled.
  /// @dev RMN depends on this enum, if changing, please notify the RMN maintainers.
  enum MessageExecutionState {
    UNTOUCHED,
    IN_PROGRESS,
    SUCCESS,
    FAILURE
  }
  /// @notice CCIP OCR plugin type, used to separate execution & commit transmissions and configs
  enum OCRPluginType {
    Commit,
    Execution
  }
  /// @notice Family-agnostic token amounts used for both OnRamp & OffRamp messages
  struct RampTokenAmount {
    // The source pool address, abi encoded. This value is trusted as it was obtained through the onRamp. It can be
    // relied upon by the destination pool to validate the source pool.
    bytes sourcePoolAddress;
    // The address of the destination token, abi encoded in the case of EVM chains
    // This value is UNTRUSTED as any pool owner can return whatever value they want.
    bytes destTokenAddress;
    // Optional pool data to be transferred to the destination chain. Be default this is capped at
    // CCIP_LOCK_OR_BURN_V1_RET_BYTES bytes. If more data is required, the TokenTransferFeeConfig.destBytesOverhead
    // has to be set for the specific token.
    bytes extraData;
    uint256 amount; // Amount of tokens.
  }
  /// @notice Family-agnostic header for OnRamp & OffRamp messages.
  /// The messageId is not expected to match hash(message), since it may originate from another ramp family
  struct RampMessageHeader {
    bytes32 messageId; // Unique identifier for the message, generated with the source chain's encoding scheme (i.e. not necessarily abi.encoded)
    uint64 sourceChainSelector; // ──╮ the chain selector of the source chain, note: not chainId
    uint64 destChainSelector; //     | the chain selector of the destination chain, note: not chainId
    uint64 sequenceNumber; //        │ sequence number, not unique across lanes
    uint64 nonce; // ────────────────╯ nonce for this lane for this sender, not unique across senders/lanes
  }
  /// @notice Family-agnostic message routed to an OffRamp
  /// Note: hash(Any2EVMRampMessage) != hash(EVM2AnyRampMessage), hash(Any2EVMRampMessage) != messageId
  /// due to encoding & parameter differences
  struct Any2EVMRampMessage {
    RampMessageHeader header; // Message header
    bytes sender; // sender address on the source chain
    bytes data; // arbitrary data payload supplied by the message sender
    address receiver; // receiver address on the destination chain
    uint256 gasLimit; // user supplied maximum gas amount available for dest chain execution
    RampTokenAmount[] tokenAmounts; // array of tokens and amounts to transfer
  }
  /// @notice Family-agnostic message emitted from the OnRamp
  /// Note: hash(Any2EVMRampMessage) != hash(EVM2AnyRampMessage) due to encoding & parameter differences
  /// messageId = hash(EVM2AnyRampMessage) using the source EVM chain's encoding format
  struct EVM2AnyRampMessage {
    RampMessageHeader header; // Message header
    address sender; // sender address on the source chain
    bytes data; // arbitrary data payload supplied by the message sender
    bytes receiver; // receiver address on the destination chain
    bytes extraArgs; // destination-chain specific extra args, such as the gasLimit for EVM chains
    address feeToken; // fee token
    uint256 feeTokenAmount; // fee token amount
    RampTokenAmount[] tokenAmounts; // array of tokens and amounts to transfer
  }
  // bytes4(keccak256("CCIP ChainFamilySelector EVM"))
  bytes4 public constant CHAIN_FAMILY_SELECTOR_EVM = 0x2812d52c;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @notice This library contains various token pool functions to aid constructing the return data.
library Pool {
  // The tag used to signal support for the pool v1 standard
  // bytes4(keccak256("CCIP_POOL_V1"))
  bytes4 public constant CCIP_POOL_V1 = 0xaff2afbf;
  // The number of bytes in the return data for a pool v1 releaseOrMint call.
  // This should match the size of the ReleaseOrMintOutV1 struct.
  uint16 public constant CCIP_POOL_V1_RET_BYTES = 32;
  // The default max number of bytes in the return data for a pool v1 lockOrBurn call.
  // This data can be used to send information to the destination chain token pool. Can be overwritten
  // in the TokenTransferFeeConfig.destBytesOverhead if more data is required.
  uint32 public constant CCIP_LOCK_OR_BURN_V1_RET_BYTES = 32;
  struct LockOrBurnInV1 {
    bytes receiver; //  The recipient of the tokens on the destination chain, abi encoded
    uint64 remoteChainSelector; // ─╮ The chain ID of the destination chain
    address originalSender; // ─────╯ The original sender of the tx on the source chain
    uint256 amount; //  The amount of tokens to lock or burn, denominated in the source token's decimals
    address localToken; //  The address on this chain of the token to lock or burn
  }
  struct LockOrBurnOutV1 {
    // The address of the destination token, abi encoded in the case of EVM chains
    // This value is UNTRUSTED as any pool owner can return whatever value they want.
    bytes destTokenAddress;
    // Optional pool data to be transferred to the destination chain. Be default this is capped at
    // CCIP_LOCK_OR_BURN_V1_RET_BYTES bytes. If more data is required, the TokenTransferFeeConfig.destBytesOverhead
    // has to be set for the specific token.
    bytes destPoolData;
  }
  struct ReleaseOrMintInV1 {
    bytes originalSender; //          The original sender of the tx on the source chain
    uint64 remoteChainSelector; // ─╮ The chain ID of the source chain
    address receiver; // ───────────╯ The recipient of the tokens on the destination chain.
    uint256 amount; //                The amount of tokens to release or mint, denominated in the source token's decimals
    address localToken; //            The address on this chain of the token to release or mint
    /// @dev WARNING: sourcePoolAddress should be checked prior to any processing of funds. Make sure it matches the
    /// expected pool address for the given remoteChainSelector.
    bytes sourcePoolAddress; //       The address of the source pool, abi encoded in the case of EVM chains
    bytes sourcePoolData; //          The data received from the source pool to process the release or mint
    /// @dev WARNING: offchainTokenData is untrusted data.
    bytes offchainTokenData; //       The offchain data to process the release or mint
  }
  struct ReleaseOrMintOutV1 {
    // The number of tokens released or minted on the destination chain, denominated in the local token's decimals.
    // This value is expected to be equal to the ReleaseOrMintInV1.amount in the case where the source and destination
    // chain have the same number of decimals.
    uint256 destinationAmount;
  }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
/// @notice Implements Token Bucket rate limiting.
/// @dev uint128 is safe for rate limiter state.
/// For USD value rate limiting, it can adequately store USD value in 18 decimals.
/// For ERC20 token amount rate limiting, all tokens that will be listed will have at most
/// a supply of uint128.max tokens, and it will therefore not overflow the bucket.
/// In exceptional scenarios where tokens consumed may be larger than uint128,
/// e.g. compromised issuer, an enabled RateLimiter will check and revert.
library RateLimiter {
  error BucketOverfilled();
  error OnlyCallableByAdminOrOwner();
  error TokenMaxCapacityExceeded(uint256 capacity, uint256 requested, address tokenAddress);
  error TokenRateLimitReached(uint256 minWaitInSeconds, uint256 available, address tokenAddress);
  error AggregateValueMaxCapacityExceeded(uint256 capacity, uint256 requested);
  error AggregateValueRateLimitReached(uint256 minWaitInSeconds, uint256 available);
  error InvalidRateLimitRate(Config rateLimiterConfig);
  error DisabledNonZeroRateLimit(Config config);
  error RateLimitMustBeDisabled();
  event TokensConsumed(uint256 tokens);
  event ConfigChanged(Config config);
  struct TokenBucket {
    uint128 tokens; // ──────╮ Current number of tokens that are in the bucket.
    uint32 lastUpdated; //   │ Timestamp in seconds of the last token refill, good for 100+ years.
    bool isEnabled; // ──────╯ Indication whether the rate limiting is enabled or not
    uint128 capacity; // ────╮ Maximum number of tokens that can be in the bucket.
    uint128 rate; // ────────╯ Number of tokens per second that the bucket is refilled.
  }
  struct Config {
    bool isEnabled; // Indication whether the rate limiting should be enabled
    uint128 capacity; // ────╮ Specifies the capacity of the rate limiter
    uint128 rate; //  ───────╯ Specifies the rate of the rate limiter
  }
  /// @notice _consume removes the given tokens from the pool, lowering the
  /// rate tokens allowed to be consumed for subsequent calls.
  /// @param requestTokens The total tokens to be consumed from the bucket.
  /// @param tokenAddress The token to consume capacity for, use 0x0 to indicate aggregate value capacity.
  /// @dev Reverts when requestTokens exceeds bucket capacity or available tokens in the bucket
  /// @dev emits removal of requestTokens if requestTokens is > 0
  function _consume(TokenBucket storage s_bucket, uint256 requestTokens, address tokenAddress) internal {
    // If there is no value to remove or rate limiting is turned off, skip this step to reduce gas usage
    if (!s_bucket.isEnabled || requestTokens == 0) {
      return;
    }
    uint256 tokens = s_bucket.tokens;
    uint256 capacity = s_bucket.capacity;
    uint256 timeDiff = block.timestamp - s_bucket.lastUpdated;
    if (timeDiff != 0) {
      if (tokens > capacity) revert BucketOverfilled();
      // Refill tokens when arriving at a new block time
      tokens = _calculateRefill(capacity, tokens, timeDiff, s_bucket.rate);
      s_bucket.lastUpdated = uint32(block.timestamp);
    }
    if (capacity < requestTokens) {
      // Token address 0 indicates consuming aggregate value rate limit capacity.
      if (tokenAddress == address(0)) revert AggregateValueMaxCapacityExceeded(capacity, requestTokens);
      revert TokenMaxCapacityExceeded(capacity, requestTokens, tokenAddress);
    }
    if (tokens < requestTokens) {
      uint256 rate = s_bucket.rate;
      // Wait required until the bucket is refilled enough to accept this value, round up to next higher second
      // Consume is not guaranteed to succeed after wait time passes if there is competing traffic.
      // This acts as a lower bound of wait time.
      uint256 minWaitInSeconds = ((requestTokens - tokens) + (rate - 1)) / rate;
      if (tokenAddress == address(0)) revert AggregateValueRateLimitReached(minWaitInSeconds, tokens);
      revert TokenRateLimitReached(minWaitInSeconds, tokens, tokenAddress);
    }
    tokens -= requestTokens;
    // Downcast is safe here, as tokens is not larger than capacity
    s_bucket.tokens = uint128(tokens);
    emit TokensConsumed(requestTokens);
  }
  /// @notice Gets the token bucket with its values for the block it was requested at.
  /// @return The token bucket.
  function _currentTokenBucketState(TokenBucket memory bucket) internal view returns (TokenBucket memory) {
    // We update the bucket to reflect the status at the exact time of the
    // call. This means we might need to refill a part of the bucket based
    // on the time that has passed since the last update.
    bucket.tokens =
      uint128(_calculateRefill(bucket.capacity, bucket.tokens, block.timestamp - bucket.lastUpdated, bucket.rate));
    bucket.lastUpdated = uint32(block.timestamp);
    return bucket;
  }
  /// @notice Sets the rate limited config.
  /// @param s_bucket The token bucket
  /// @param config The new config
  function _setTokenBucketConfig(TokenBucket storage s_bucket, Config memory config) internal {
    // First update the bucket to make sure the proper rate is used for all the time
    // up until the config change.
    uint256 timeDiff = block.timestamp - s_bucket.lastUpdated;
    if (timeDiff != 0) {
      s_bucket.tokens = uint128(_calculateRefill(s_bucket.capacity, s_bucket.tokens, timeDiff, s_bucket.rate));
      s_bucket.lastUpdated = uint32(block.timestamp);
    }
    s_bucket.tokens = uint128(_min(config.capacity, s_bucket.tokens));
    s_bucket.isEnabled = config.isEnabled;
    s_bucket.capacity = config.capacity;
    s_bucket.rate = config.rate;
    emit ConfigChanged(config);
  }
  /// @notice Validates the token bucket config
  function _validateTokenBucketConfig(Config memory config, bool mustBeDisabled) internal pure {
    if (config.isEnabled) {
      if (config.rate >= config.capacity || config.rate == 0) {
        revert InvalidRateLimitRate(config);
      }
      if (mustBeDisabled) {
        revert RateLimitMustBeDisabled();
      }
    } else {
      if (config.rate != 0 || config.capacity != 0) {
        revert DisabledNonZeroRateLimit(config);
      }
    }
  }
  /// @notice Calculate refilled tokens
  /// @param capacity bucket capacity
  /// @param tokens current bucket tokens
  /// @param timeDiff block time difference since last refill
  /// @param rate bucket refill rate
  /// @return the value of tokens after refill
  function _calculateRefill(
    uint256 capacity,
    uint256 tokens,
    uint256 timeDiff,
    uint256 rate
  ) private pure returns (uint256) {
    return _min(capacity, tokens + timeDiff * rate);
  }
  /// @notice Return the smallest of two integers
  /// @param a first int
  /// @param b second int
  /// @return smallest
  function _min(uint256 a, uint256 b) internal pure returns (uint256) {
    return a < b ? a : b;
  }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
library USDPriceWith18Decimals {
  /// @notice Takes a price in USD, with 18 decimals per 1e18 token amount,
  /// and amount of the smallest token denomination,
  /// calculates the value in USD with 18 decimals.
  /// @param tokenPrice The USD price of the token.
  /// @param tokenAmount Amount of the smallest token denomination.
  /// @return USD value with 18 decimals.
  /// @dev this function assumes that no more than 1e59 US dollar worth of token is passed in.
  /// If more is sent, this function will overflow and revert.
  /// Since there isn't even close to 1e59 dollars, this is ok for all legit tokens.
  function _calcUSDValueFromTokenAmount(uint224 tokenPrice, uint256 tokenAmount) internal pure returns (uint256) {
    /// LINK Example:
    /// tokenPrice:         8e18 -> $8/LINK, as 1e18 token amount is 1 LINK, worth 8 USD, or 8e18 with 18 decimals
    /// tokenAmount:        2e18 -> 2 LINK
    /// result:             8e18 * 2e18 / 1e18 -> 16e18 with 18 decimals = $16
    /// USDC Example:
    /// tokenPrice:         1e30 -> $1/USDC, as 1e18 token amount is 1e12 USDC, worth 1e12 USD, or 1e30 with 18 decimals
    /// tokenAmount:        5e6  -> 5 USDC
    /// result:             1e30 * 5e6 / 1e18 -> 5e18 with 18 decimals = $5
    return (tokenPrice * tokenAmount) / 1e18;
  }
  /// @notice Takes a price in USD, with 18 decimals per 1e18 token amount,
  /// and USD value with 18 decimals,
  /// calculates amount of the smallest token denomination.
  /// @param tokenPrice The USD price of the token.
  /// @param usdValue USD value with 18 decimals.
  /// @return Amount of the smallest token denomination.
  function _calcTokenAmountFromUSDValue(uint224 tokenPrice, uint256 usdValue) internal pure returns (uint256) {
    /// LINK Example:
    /// tokenPrice:          8e18 -> $8/LINK, as 1e18 token amount is 1 LINK, worth 8 USD, or 8e18 with 18 decimals
    /// usdValue:           16e18 -> $16
    /// result:             16e18 * 1e18 / 8e18 -> 2e18 = 2 LINK
    /// USDC Example:
    /// tokenPrice:         1e30 -> $1/USDC, as 1e18 token amount is 1e12 USDC, worth 1e12 USD, or 1e30 with 18 decimals
    /// usdValue:           5e18 -> $5
    /// result:             5e18 * 1e18 / 1e30 -> 5e6 = 5 USDC
    return (usdValue * 1e18) / tokenPrice;
  }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
  /**
   * @dev Emitted when `value` tokens are moved from one account (`from`) to
   * another (`to`).
   *
   * Note that `value` may be zero.
   */
  event Transfer(address indexed from, address indexed to, uint256 value);
  /**
   * @dev Emitted when the allowance of a `spender` for an `owner` is set by
   * a call to {approve}. `value` is the new allowance.
   */
  event Approval(address indexed owner, address indexed spender, uint256 value);
  /**
   * @dev Returns the amount of tokens in existence.
   */
  function totalSupply() external view returns (uint256);
  /**
   * @dev Returns the amount of tokens owned by `account`.
   */
  function balanceOf(address account) external view returns (uint256);
  /**
   * @dev Moves `amount` tokens from the caller's account to `to`.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transfer(address to, uint256 amount) external returns (bool);
  /**
   * @dev Returns the remaining number of tokens that `spender` will be
   * allowed to spend on behalf of `owner` through {transferFrom}. This is
   * zero by default.
   *
   * This value changes when {approve} or {transferFrom} are called.
   */
  function allowance(address owner, address spender) external view returns (uint256);
  /**
   * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * IMPORTANT: Beware that changing an allowance with this method brings the risk
   * that someone may use both the old and the new allowance by unfortunate
   * transaction ordering. One possible solution to mitigate this race
   * condition is to first reduce the spender's allowance to 0 and set the
   * desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   *
   * Emits an {Approval} event.
   */
  function approve(address spender, uint256 amount) external returns (bool);
  /**
   * @dev Moves `amount` tokens from `from` to `to` using the
   * allowance mechanism. `amount` is then deducted from the caller's
   * allowance.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(address from, address to, uint256 amount) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";
/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
  using Address for address;
  function safeTransfer(IERC20 token, address to, uint256 value) internal {
    _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
  }
  function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
    _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
  }
  /**
   * @dev Deprecated. This function has issues similar to the ones found in
   * {IERC20-approve}, and its usage is discouraged.
   *
   * Whenever possible, use {safeIncreaseAllowance} and
   * {safeDecreaseAllowance} instead.
   */
  function safeApprove(IERC20 token, address spender, uint256 value) internal {
    // safeApprove should only be called when setting an initial allowance,
    // or when resetting it to zero. To increase and decrease it, use
    // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
    require(
      (value == 0) || (token.allowance(address(this), spender) == 0),
      "SafeERC20: approve from non-zero to non-zero allowance"
    );
    _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
  }
  function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
    uint256 newAllowance = token.allowance(address(this), spender) + value;
    _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
  }
  function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
    unchecked {
      uint256 oldAllowance = token.allowance(address(this), spender);
      require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
      uint256 newAllowance = oldAllowance - value;
      _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
  }
  function safePermit(
    IERC20Permit token,
    address owner,
    address spender,
    uint256 value,
    uint256 deadline,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) internal {
    uint256 nonceBefore = token.nonces(owner);
    token.permit(owner, spender, value, deadline, v, r, s);
    uint256 nonceAfter = token.nonces(owner);
    require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
  }
  /**
   * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
   * on the return value: the return value is optional (but if data is returned, it must not be false).
   * @param token The token targeted by the call.
   * @param data The call data (encoded using abi.encode or one of its variants).
   */
  function _callOptionalReturn(IERC20 token, bytes memory data) private {
    // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
    // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
    // the target address contains contract code and also asserts for success in the low-level call.
    bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
    if (returndata.length > 0) {
      // Return data is optional
      require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
    }
  }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/structs/EnumerableMap.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableMap.js.
pragma solidity ^0.8.20;
import {EnumerableSet} from "./EnumerableSet.sol";
/**
 * @dev Library for managing an enumerable variant of Solidity's
 * https://solidity.readthedocs.io/en/latest/types.html#mapping-types[`mapping`]
 * type.
 *
 * Maps have the following properties:
 *
 * - Entries are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Entries are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```solidity
 * contract Example {
 *     // Add the library methods
 *     using EnumerableMap for EnumerableMap.UintToAddressMap;
 *
 *     // Declare a set state variable
 *     EnumerableMap.UintToAddressMap private myMap;
 * }
 * ```
 *
 * The following map types are supported:
 *
 * - `uint256 -> address` (`UintToAddressMap`) since v3.0.0
 * - `address -> uint256` (`AddressToUintMap`) since v4.6.0
 * - `bytes32 -> bytes32` (`Bytes32ToBytes32Map`) since v4.6.0
 * - `uint256 -> uint256` (`UintToUintMap`) since v4.7.0
 * - `bytes32 -> uint256` (`Bytes32ToUintMap`) since v4.7.0
 *
 * [WARNING]
 * ====
 * Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
 * unusable.
 * See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 * In order to clean an EnumerableMap, you can either remove all elements one by one or create a fresh instance using an
 * array of EnumerableMap.
 * ====
 */
library EnumerableMap {
    using EnumerableSet for EnumerableSet.Bytes32Set;
    // To implement this library for multiple types with as little code repetition as possible, we write it in
    // terms of a generic Map type with bytes32 keys and values. The Map implementation uses private functions,
    // and user-facing implementations such as `UintToAddressMap` are just wrappers around the underlying Map.
    // This means that we can only create new EnumerableMaps for types that fit in bytes32.
    /**
     * @dev Query for a nonexistent map key.
     */
    error EnumerableMapNonexistentKey(bytes32 key);
    struct Bytes32ToBytes32Map {
        // Storage of keys
        EnumerableSet.Bytes32Set _keys;
        mapping(bytes32 key => bytes32) _values;
    }
    /**
     * @dev Adds a key-value pair to a map, or updates the value for an existing
     * key. O(1).
     *
     * Returns true if the key was added to the map, that is if it was not
     * already present.
     */
    function set(Bytes32ToBytes32Map storage map, bytes32 key, bytes32 value) internal returns (bool) {
        map._values[key] = value;
        return map._keys.add(key);
    }
    /**
     * @dev Removes a key-value pair from a map. O(1).
     *
     * Returns true if the key was removed from the map, that is if it was present.
     */
    function remove(Bytes32ToBytes32Map storage map, bytes32 key) internal returns (bool) {
        delete map._values[key];
        return map._keys.remove(key);
    }
    /**
     * @dev Returns true if the key is in the map. O(1).
     */
    function contains(Bytes32ToBytes32Map storage map, bytes32 key) internal view returns (bool) {
        return map._keys.contains(key);
    }
    /**
     * @dev Returns the number of key-value pairs in the map. O(1).
     */
    function length(Bytes32ToBytes32Map storage map) internal view returns (uint256) {
        return map._keys.length();
    }
    /**
     * @dev Returns the key-value pair stored at position `index` in the map. O(1).
     *
     * Note that there are no guarantees on the ordering of entries inside the
     * array, and it may change when more entries are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32ToBytes32Map storage map, uint256 index) internal view returns (bytes32, bytes32) {
        bytes32 key = map._keys.at(index);
        return (key, map._values[key]);
    }
    /**
     * @dev Tries to returns the value associated with `key`. O(1).
     * Does not revert if `key` is not in the map.
     */
    function tryGet(Bytes32ToBytes32Map storage map, bytes32 key) internal view returns (bool, bytes32) {
        bytes32 value = map._values[key];
        if (value == bytes32(0)) {
            return (contains(map, key), bytes32(0));
        } else {
            return (true, value);
        }
    }
    /**
     * @dev Returns the value associated with `key`. O(1).
     *
     * Requirements:
     *
     * - `key` must be in the map.
     */
    function get(Bytes32ToBytes32Map storage map, bytes32 key) internal view returns (bytes32) {
        bytes32 value = map._values[key];
        if (value == 0 && !contains(map, key)) {
            revert EnumerableMapNonexistentKey(key);
        }
        return value;
    }
    /**
     * @dev Return the an array containing all the keys
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the map grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function keys(Bytes32ToBytes32Map storage map) internal view returns (bytes32[] memory) {
        return map._keys.values();
    }
    // UintToUintMap
    struct UintToUintMap {
        Bytes32ToBytes32Map _inner;
    }
    /**
     * @dev Adds a key-value pair to a map, or updates the value for an existing
     * key. O(1).
     *
     * Returns true if the key was added to the map, that is if it was not
     * already present.
     */
    function set(UintToUintMap storage map, uint256 key, uint256 value) internal returns (bool) {
        return set(map._inner, bytes32(key), bytes32(value));
    }
    /**
     * @dev Removes a value from a map. O(1).
     *
     * Returns true if the key was removed from the map, that is if it was present.
     */
    function remove(UintToUintMap storage map, uint256 key) internal returns (bool) {
        return remove(map._inner, bytes32(key));
    }
    /**
     * @dev Returns true if the key is in the map. O(1).
     */
    function contains(UintToUintMap storage map, uint256 key) internal view returns (bool) {
        return contains(map._inner, bytes32(key));
    }
    /**
     * @dev Returns the number of elements in the map. O(1).
     */
    function length(UintToUintMap storage map) internal view returns (uint256) {
        return length(map._inner);
    }
    /**
     * @dev Returns the element stored at position `index` in the map. O(1).
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintToUintMap storage map, uint256 index) internal view returns (uint256, uint256) {
        (bytes32 key, bytes32 value) = at(map._inner, index);
        return (uint256(key), uint256(value));
    }
    /**
     * @dev Tries to returns the value associated with `key`. O(1).
     * Does not revert if `key` is not in the map.
     */
    function tryGet(UintToUintMap storage map, uint256 key) internal view returns (bool, uint256) {
        (bool success, bytes32 value) = tryGet(map._inner, bytes32(key));
        return (success, uint256(value));
    }
    /**
     * @dev Returns the value associated with `key`. O(1).
     *
     * Requirements:
     *
     * - `key` must be in the map.
     */
    function get(UintToUintMap storage map, uint256 key) internal view returns (uint256) {
        return uint256(get(map._inner, bytes32(key)));
    }
    /**
     * @dev Return the an array containing all the keys
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the map grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function keys(UintToUintMap storage map) internal view returns (uint256[] memory) {
        bytes32[] memory store = keys(map._inner);
        uint256[] memory result;
        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }
        return result;
    }
    // UintToAddressMap
    struct UintToAddressMap {
        Bytes32ToBytes32Map _inner;
    }
    /**
     * @dev Adds a key-value pair to a map, or updates the value for an existing
     * key. O(1).
     *
     * Returns true if the key was added to the map, that is if it was not
     * already present.
     */
    function set(UintToAddressMap storage map, uint256 key, address value) internal returns (bool) {
        return set(map._inner, bytes32(key), bytes32(uint256(uint160(value))));
    }
    /**
     * @dev Removes a value from a map. O(1).
     *
     * Returns true if the key was removed from the map, that is if it was present.
     */
    function remove(UintToAddressMap storage map, uint256 key) internal returns (bool) {
        return remove(map._inner, bytes32(key));
    }
    /**
     * @dev Returns true if the key is in the map. O(1).
     */
    function contains(UintToAddressMap storage map, uint256 key) internal view returns (bool) {
        return contains(map._inner, bytes32(key));
    }
    /**
     * @dev Returns the number of elements in the map. O(1).
     */
    function length(UintToAddressMap storage map) internal view returns (uint256) {
        return length(map._inner);
    }
    /**
     * @dev Returns the element stored at position `index` in the map. O(1).
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintToAddressMap storage map, uint256 index) internal view returns (uint256, address) {
        (bytes32 key, bytes32 value) = at(map._inner, index);
        return (uint256(key), address(uint160(uint256(value))));
    }
    /**
     * @dev Tries to returns the value associated with `key`. O(1).
     * Does not revert if `key` is not in the map.
     */
    function tryGet(UintToAddressMap storage map, uint256 key) internal view returns (bool, address) {
        (bool success, bytes32 value) = tryGet(map._inner, bytes32(key));
        return (success, address(uint160(uint256(value))));
    }
    /**
     * @dev Returns the value associated with `key`. O(1).
     *
     * Requirements:
     *
     * - `key` must be in the map.
     */
    function get(UintToAddressMap storage map, uint256 key) internal view returns (address) {
        return address(uint160(uint256(get(map._inner, bytes32(key)))));
    }
    /**
     * @dev Return the an array containing all the keys
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the map grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function keys(UintToAddressMap storage map) internal view returns (uint256[] memory) {
        bytes32[] memory store = keys(map._inner);
        uint256[] memory result;
        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }
        return result;
    }
    // AddressToUintMap
    struct AddressToUintMap {
        Bytes32ToBytes32Map _inner;
    }
    /**
     * @dev Adds a key-value pair to a map, or updates the value for an existing
     * key. O(1).
     *
     * Returns true if the key was added to the map, that is if it was not
     * already present.
     */
    function set(AddressToUintMap storage map, address key, uint256 value) internal returns (bool) {
        return set(map._inner, bytes32(uint256(uint160(key))), bytes32(value));
    }
    /**
     * @dev Removes a value from a map. O(1).
     *
     * Returns true if the key was removed from the map, that is if it was present.
     */
    function remove(AddressToUintMap storage map, address key) internal returns (bool) {
        return remove(map._inner, bytes32(uint256(uint160(key))));
    }
    /**
     * @dev Returns true if the key is in the map. O(1).
     */
    function contains(AddressToUintMap storage map, address key) internal view returns (bool) {
        return contains(map._inner, bytes32(uint256(uint160(key))));
    }
    /**
     * @dev Returns the number of elements in the map. O(1).
     */
    function length(AddressToUintMap storage map) internal view returns (uint256) {
        return length(map._inner);
    }
    /**
     * @dev Returns the element stored at position `index` in the map. O(1).
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressToUintMap storage map, uint256 index) internal view returns (address, uint256) {
        (bytes32 key, bytes32 value) = at(map._inner, index);
        return (address(uint160(uint256(key))), uint256(value));
    }
    /**
     * @dev Tries to returns the value associated with `key`. O(1).
     * Does not revert if `key` is not in the map.
     */
    function tryGet(AddressToUintMap storage map, address key) internal view returns (bool, uint256) {
        (bool success, bytes32 value) = tryGet(map._inner, bytes32(uint256(uint160(key))));
        return (success, uint256(value));
    }
    /**
     * @dev Returns the value associated with `key`. O(1).
     *
     * Requirements:
     *
     * - `key` must be in the map.
     */
    function get(AddressToUintMap storage map, address key) internal view returns (uint256) {
        return uint256(get(map._inner, bytes32(uint256(uint160(key)))));
    }
    /**
     * @dev Return the an array containing all the keys
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the map grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function keys(AddressToUintMap storage map) internal view returns (address[] memory) {
        bytes32[] memory store = keys(map._inner);
        address[] memory result;
        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }
        return result;
    }
    // Bytes32ToUintMap
    struct Bytes32ToUintMap {
        Bytes32ToBytes32Map _inner;
    }
    /**
     * @dev Adds a key-value pair to a map, or updates the value for an existing
     * key. O(1).
     *
     * Returns true if the key was added to the map, that is if it was not
     * already present.
     */
    function set(Bytes32ToUintMap storage map, bytes32 key, uint256 value) internal returns (bool) {
        return set(map._inner, key, bytes32(value));
    }
    /**
     * @dev Removes a value from a map. O(1).
     *
     * Returns true if the key was removed from the map, that is if it was present.
     */
    function remove(Bytes32ToUintMap storage map, bytes32 key) internal returns (bool) {
        return remove(map._inner, key);
    }
    /**
     * @dev Returns true if the key is in the map. O(1).
     */
    function contains(Bytes32ToUintMap storage map, bytes32 key) internal view returns (bool) {
        return contains(map._inner, key);
    }
    /**
     * @dev Returns the number of elements in the map. O(1).
     */
    function length(Bytes32ToUintMap storage map) internal view returns (uint256) {
        return length(map._inner);
    }
    /**
     * @dev Returns the element stored at position `index` in the map. O(1).
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32ToUintMap storage map, uint256 index) internal view returns (bytes32, uint256) {
        (bytes32 key, bytes32 value) = at(map._inner, index);
        return (key, uint256(value));
    }
    /**
     * @dev Tries to returns the value associated with `key`. O(1).
     * Does not revert if `key` is not in the map.
     */
    function tryGet(Bytes32ToUintMap storage map, bytes32 key) internal view returns (bool, uint256) {
        (bool success, bytes32 value) = tryGet(map._inner, key);
        return (success, uint256(value));
    }
    /**
     * @dev Returns the value associated with `key`. O(1).
     *
     * Requirements:
     *
     * - `key` must be in the map.
     */
    function get(Bytes32ToUintMap storage map, bytes32 key) internal view returns (uint256) {
        return uint256(get(map._inner, key));
    }
    /**
     * @dev Return the an array containing all the keys
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the map grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function keys(Bytes32ToUintMap storage map) internal view returns (bytes32[] memory) {
        bytes32[] memory store = keys(map._inner);
        bytes32[] memory result;
        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }
        return result;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)
pragma solidity ^0.8.20;
/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {ConfirmedOwner} from "./ConfirmedOwner.sol";
/// @title The OwnerIsCreator contract
/// @notice A contract with helpers for basic contract ownership.
contract OwnerIsCreator is ConfirmedOwner {
  constructor() ConfirmedOwner(msg.sender) {}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
library MerkleMultiProof {
  /// @notice Leaf domain separator, should be used as the first 32 bytes of a leaf's preimage.
  bytes32 internal constant LEAF_DOMAIN_SEPARATOR = 0x0000000000000000000000000000000000000000000000000000000000000000;
  /// @notice Internal domain separator, should be used as the first 32 bytes of an internal node's preiimage.
  bytes32 internal constant INTERNAL_DOMAIN_SEPARATOR =
    0x0000000000000000000000000000000000000000000000000000000000000001;
  uint256 internal constant MAX_NUM_HASHES = 256;
  error InvalidProof();
  error LeavesCannotBeEmpty();
  /// @notice Computes the root based on provided pre-hashed leaf nodes in
  /// leaves, internal nodes in proofs, and using proofFlagBits' i-th bit to
  /// determine if an element of proofs or one of the previously computed leafs
  /// or internal nodes will be used for the i-th hash.
  /// @param leaves Should be pre-hashed and the first 32 bytes of a leaf's
  /// preimage should match LEAF_DOMAIN_SEPARATOR.
  /// @param proofs The hashes to be used instead of a leaf hash when the proofFlagBits
  ///  indicates a proof should be used.
  /// @param proofFlagBits A single uint256 of which each bit indicates whether a leaf or
  ///  a proof needs to be used in a hash operation.
  /// @dev the maximum number of hash operations it set to 256. Any input that would require
  ///  more than 256 hashes to get to a root will revert.
  /// @dev For given input `leaves` = [a,b,c] `proofs` = [D] and `proofFlagBits` = 5
  ///     totalHashes = 3 + 1 - 1 = 3
  ///  ** round 1 **
  ///    proofFlagBits = (5 >> 0) & 1 = true
  ///    hashes[0] = hashPair(a, b)
  ///    (leafPos, hashPos, proofPos) = (2, 0, 0);
  ///
  ///  ** round 2 **
  ///    proofFlagBits = (5 >> 1) & 1 = false
  ///    hashes[1] = hashPair(D, c)
  ///    (leafPos, hashPos, proofPos) = (3, 0, 1);
  ///
  ///  ** round 3 **
  ///    proofFlagBits = (5 >> 2) & 1 = true
  ///    hashes[2] = hashPair(hashes[0], hashes[1])
  ///    (leafPos, hashPos, proofPos) = (3, 2, 1);
  ///
  ///    i = 3 and no longer < totalHashes. The algorithm is done
  ///    return hashes[totalHashes - 1] = hashes[2]; the last hash we computed.
  // We mark this function as internal to force it to be inlined in contracts
  // that use it, but semantically it is public.
  // solhint-disable-next-line chainlink-solidity/prefix-internal-functions-with-underscore
  function merkleRoot(
    bytes32[] memory leaves,
    bytes32[] memory proofs,
    uint256 proofFlagBits
  ) internal pure returns (bytes32) {
    unchecked {
      uint256 leavesLen = leaves.length;
      uint256 proofsLen = proofs.length;
      if (leavesLen == 0) revert LeavesCannotBeEmpty();
      if (!(leavesLen <= MAX_NUM_HASHES + 1 && proofsLen <= MAX_NUM_HASHES + 1)) revert InvalidProof();
      uint256 totalHashes = leavesLen + proofsLen - 1;
      if (!(totalHashes <= MAX_NUM_HASHES)) revert InvalidProof();
      if (totalHashes == 0) {
        return leaves[0];
      }
      bytes32[] memory hashes = new bytes32[](totalHashes);
      (uint256 leafPos, uint256 hashPos, uint256 proofPos) = (0, 0, 0);
      for (uint256 i = 0; i < totalHashes; ++i) {
        // Checks if the bit flag signals the use of a supplied proof or a leaf/previous hash.
        bytes32 a;
        if (proofFlagBits & (1 << i) == (1 << i)) {
          // Use a leaf or a previously computed hash.
          if (leafPos < leavesLen) {
            a = leaves[leafPos++];
          } else {
            a = hashes[hashPos++];
          }
        } else {
          // Use a supplied proof.
          a = proofs[proofPos++];
        }
        // The second part of the hashed pair is never a proof as hashing two proofs would result in a
        // hash that can already be computed offchain.
        bytes32 b;
        if (leafPos < leavesLen) {
          b = leaves[leafPos++];
        } else {
          b = hashes[hashPos++];
        }
        if (!(hashPos <= i)) revert InvalidProof();
        hashes[i] = _hashPair(a, b);
      }
      if (!(hashPos == totalHashes - 1 && leafPos == leavesLen && proofPos == proofsLen)) revert InvalidProof();
      // Return the last hash.
      return hashes[totalHashes - 1];
    }
  }
  /// @notice Hashes two bytes32 objects in their given order, prepended by the
  /// INTERNAL_DOMAIN_SEPARATOR.
  function _hashInternalNode(bytes32 left, bytes32 right) private pure returns (bytes32 hash) {
    return keccak256(abi.encode(INTERNAL_DOMAIN_SEPARATOR, left, right));
  }
  /// @notice Hashes two bytes32 objects. The order is taken into account,
  /// using the lower value first.
  function _hashPair(bytes32 a, bytes32 b) private pure returns (bytes32) {
    return a < b ? _hashInternalNode(a, b) : _hashInternalNode(b, a);
  }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
  /**
   * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
   * given ``owner``'s signed approval.
   *
   * IMPORTANT: The same issues {IERC20-approve} has related to transaction
   * ordering also apply here.
   *
   * Emits an {Approval} event.
   *
   * Requirements:
   *
   * - `spender` cannot be the zero address.
   * - `deadline` must be a timestamp in the future.
   * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
   * over the EIP712-formatted function arguments.
   * - the signature must use ``owner``'s current nonce (see {nonces}).
   *
   * For more information on the signature format, see the
   * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
   * section].
   */
  function permit(
    address owner,
    address spender,
    uint256 value,
    uint256 deadline,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) external;
  /**
   * @dev Returns the current nonce for `owner`. This value must be
   * included whenever a signature is generated for {permit}.
   *
   * Every successful call to {permit} increases ``owner``'s nonce by one. This
   * prevents a signature from being used multiple times.
   */
  function nonces(address owner) external view returns (uint256);
  /**
   * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
   */
  // solhint-disable-next-line func-name-mixedcase
  function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
  /**
   * @dev Returns true if `account` is a contract.
   *
   * [IMPORTANT]
   * ====
   * It is unsafe to assume that an address for which this function returns
   * false is an externally-owned account (EOA) and not a contract.
   *
   * Among others, `isContract` will return false for the following
   * types of addresses:
   *
   *  - an externally-owned account
   *  - a contract in construction
   *  - an address where a contract will be created
   *  - an address where a contract lived, but was destroyed
   * ====
   *
   * [IMPORTANT]
   * ====
   * You shouldn't rely on `isContract` to protect against flash loan attacks!
   *
   * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
   * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
   * constructor.
   * ====
   */
  function isContract(address account) internal view returns (bool) {
    // This method relies on extcodesize/address.code.length, which returns 0
    // for contracts in construction, since the code is only stored at the end
    // of the constructor execution.
    return account.code.length > 0;
  }
  /**
   * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
   * `recipient`, forwarding all available gas and reverting on errors.
   *
   * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
   * of certain opcodes, possibly making contracts go over the 2300 gas limit
   * imposed by `transfer`, making them unable to receive funds via
   * `transfer`. {sendValue} removes this limitation.
   *
   * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
   *
   * IMPORTANT: because control is transferred to `recipient`, care must be
   * taken to not create reentrancy vulnerabilities. Consider using
   * {ReentrancyGuard} or the
   * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
   */
  function sendValue(address payable recipient, uint256 amount) internal {
    require(address(this).balance >= amount, "Address: insufficient balance");
    (bool success, ) = recipient.call{value: amount}("");
    require(success, "Address: unable to send value, recipient may have reverted");
  }
  /**
   * @dev Performs a Solidity function call using a low level `call`. A
   * plain `call` is an unsafe replacement for a function call: use this
   * function instead.
   *
   * If `target` reverts with a revert reason, it is bubbled up by this
   * function (like regular Solidity function calls).
   *
   * Returns the raw returned data. To convert to the expected return value,
   * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
   *
   * Requirements:
   *
   * - `target` must be a contract.
   * - calling `target` with `data` must not revert.
   *
   * _Available since v3.1._
   */
  function functionCall(address target, bytes memory data) internal returns (bytes memory) {
    return functionCallWithValue(target, data, 0, "Address: low-level call failed");
  }
  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
   * `errorMessage` as a fallback revert reason when `target` reverts.
   *
   * _Available since v3.1._
   */
  function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
    return functionCallWithValue(target, data, 0, errorMessage);
  }
  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but also transferring `value` wei to `target`.
   *
   * Requirements:
   *
   * - the calling contract must have an ETH balance of at least `value`.
   * - the called Solidity function must be `payable`.
   *
   * _Available since v3.1._
   */
  function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
    return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
  }
  /**
   * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
   * with `errorMessage` as a fallback revert reason when `target` reverts.
   *
   * _Available since v3.1._
   */
  function functionCallWithValue(
    address target,
    bytes memory data,
    uint256 value,
    string memory errorMessage
  ) internal returns (bytes memory) {
    require(address(this).balance >= value, "Address: insufficient balance for call");
    (bool success, bytes memory returndata) = target.call{value: value}(data);
    return verifyCallResultFromTarget(target, success, returndata, errorMessage);
  }
  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but performing a static call.
   *
   * _Available since v3.3._
   */
  function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
    return functionStaticCall(target, data, "Address: low-level static call failed");
  }
  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
   * but performing a static call.
   *
   * _Available since v3.3._
   */
  function functionStaticCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal view returns (bytes memory) {
    (bool success, bytes memory returndata) = target.staticcall(data);
    return verifyCallResultFromTarget(target, success, returndata, errorMessage);
  }
  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but performing a delegate call.
   *
   * _Available since v3.4._
   */
  function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
    return functionDelegateCall(target, data, "Address: low-level delegate call failed");
  }
  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
   * but performing a delegate call.
   *
   * _Available since v3.4._
   */
  function functionDelegateCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal returns (bytes memory) {
    (bool success, bytes memory returndata) = target.delegatecall(data);
    return verifyCallResultFromTarget(target, success, returndata, errorMessage);
  }
  /**
   * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
   * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
   *
   * _Available since v4.8._
   */
  function verifyCallResultFromTarget(
    address target,
    bool success,
    bytes memory returndata,
    string memory errorMessage
  ) internal view returns (bytes memory) {
    if (success) {
      if (returndata.length == 0) {
        // only check isContract if the call was successful and the return data is empty
        // otherwise we already know that it was a contract
        require(isContract(target), "Address: call to non-contract");
      }
      return returndata;
    } else {
      _revert(returndata, errorMessage);
    }
  }
  /**
   * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
   * revert reason or using the provided one.
   *
   * _Available since v4.3._
   */
  function verifyCallResult(
    bool success,
    bytes memory returndata,
    string memory errorMessage
  ) internal pure returns (bytes memory) {
    if (success) {
      return returndata;
    } else {
      _revert(returndata, errorMessage);
    }
  }
  function _revert(bytes memory returndata, string memory errorMessage) private pure {
    // Look for revert reason and bubble it up if present
    if (returndata.length > 0) {
      // The easiest way to bubble the revert reason is using memory via assembly
      /// @solidity memory-safe-assembly
      assembly {
        let returndata_size := mload(returndata)
        revert(add(32, returndata), returndata_size)
      }
    } else {
      revert(errorMessage);
    }
  }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.
pragma solidity ^0.8.20;
/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```solidity
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 *
 * [WARNING]
 * ====
 * Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
 * unusable.
 * See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 * In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
 * array of EnumerableSet.
 * ====
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.
    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position is the index of the value in the `values` array plus 1.
        // Position 0 is used to mean a value is not in the set.
        mapping(bytes32 value => uint256) _positions;
    }
    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._positions[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }
    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We cache the value's position to prevent multiple reads from the same storage slot
        uint256 position = set._positions[value];
        if (position != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.
            uint256 valueIndex = position - 1;
            uint256 lastIndex = set._values.length - 1;
            if (valueIndex != lastIndex) {
                bytes32 lastValue = set._values[lastIndex];
                // Move the lastValue to the index where the value to delete is
                set._values[valueIndex] = lastValue;
                // Update the tracked position of the lastValue (that was just moved)
                set._positions[lastValue] = position;
            }
            // Delete the slot where the moved value was stored
            set._values.pop();
            // Delete the tracked position for the deleted slot
            delete set._positions[value];
            return true;
        } else {
            return false;
        }
    }
    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._positions[value] != 0;
    }
    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }
    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }
    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }
    // Bytes32Set
    struct Bytes32Set {
        Set _inner;
    }
    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }
    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }
    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }
    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }
    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }
    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        bytes32[] memory store = _values(set._inner);
        bytes32[] memory result;
        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }
        return result;
    }
    // AddressSet
    struct AddressSet {
        Set _inner;
    }
    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }
    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }
    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }
    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }
    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }
    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;
        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }
        return result;
    }
    // UintSet
    struct UintSet {
        Set _inner;
    }
    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }
    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }
    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }
    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }
    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }
    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;
        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }
        return result;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {ConfirmedOwnerWithProposal} from "./ConfirmedOwnerWithProposal.sol";
/// @title The ConfirmedOwner contract
/// @notice A contract with helpers for basic contract ownership.
contract ConfirmedOwner is ConfirmedOwnerWithProposal {
  constructor(address newOwner) ConfirmedOwnerWithProposal(newOwner, address(0)) {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {IOwnable} from "../interfaces/IOwnable.sol";
/// @title The ConfirmedOwner contract
/// @notice A contract with helpers for basic contract ownership.
contract ConfirmedOwnerWithProposal is IOwnable {
  address private s_owner;
  address private s_pendingOwner;
  event OwnershipTransferRequested(address indexed from, address indexed to);
  event OwnershipTransferred(address indexed from, address indexed to);
  constructor(address newOwner, address pendingOwner) {
    // solhint-disable-next-line gas-custom-errors
    require(newOwner != address(0), "Cannot set owner to zero");
    s_owner = newOwner;
    if (pendingOwner != address(0)) {
      _transferOwnership(pendingOwner);
    }
  }
  /// @notice Allows an owner to begin transferring ownership to a new address.
  function transferOwnership(address to) public override onlyOwner {
    _transferOwnership(to);
  }
  /// @notice Allows an ownership transfer to be completed by the recipient.
  function acceptOwnership() external override {
    // solhint-disable-next-line gas-custom-errors
    require(msg.sender == s_pendingOwner, "Must be proposed owner");
    address oldOwner = s_owner;
    s_owner = msg.sender;
    s_pendingOwner = address(0);
    emit OwnershipTransferred(oldOwner, msg.sender);
  }
  /// @notice Get the current owner
  function owner() public view override returns (address) {
    return s_owner;
  }
  /// @notice validate, transfer ownership, and emit relevant events
  function _transferOwnership(address to) private {
    // solhint-disable-next-line gas-custom-errors
    require(to != msg.sender, "Cannot transfer to self");
    s_pendingOwner = to;
    emit OwnershipTransferRequested(s_owner, to);
  }
  /// @notice validate access
  function _validateOwnership() internal view {
    // solhint-disable-next-line gas-custom-errors
    require(msg.sender == s_owner, "Only callable by owner");
  }
  /// @notice Reverts if called by anyone other than the contract owner.
  modifier onlyOwner() {
    _validateOwnership();
    _;
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface IOwnable {
  function owner() external returns (address);
  function transferOwnership(address recipient) external;
  function acceptOwnership() external;
}

/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { EIP712Domain } from "./EIP712Domain.sol"; // solhint-disable-line no-unused-import
import { Blacklistable } from "../v1/Blacklistable.sol"; // solhint-disable-line no-unused-import
import { FiatTokenV1 } from "../v1/FiatTokenV1.sol"; // solhint-disable-line no-unused-import
import { FiatTokenV2 } from "./FiatTokenV2.sol"; // solhint-disable-line no-unused-import
import { FiatTokenV2_1 } from "./FiatTokenV2_1.sol";
import { EIP712 } from "../util/EIP712.sol";
// solhint-disable func-name-mixedcase
/**
 * @title FiatToken V2.2
 * @notice ERC20 Token backed by fiat reserves, version 2.2
 */
contract FiatTokenV2_2 is FiatTokenV2_1 {
    /**
     * @notice Initialize v2.2
     * @param accountsToBlacklist   A list of accounts to migrate from the old blacklist
     * @param newSymbol             New token symbol
     * data structure to the new blacklist data structure.
     */
    function initializeV2_2(
        address[] calldata accountsToBlacklist,
        string calldata newSymbol
    ) external {
        // solhint-disable-next-line reason-string
        require(_initializedVersion == 2);
        // Update fiat token symbol
        symbol = newSymbol;
        // Add previously blacklisted accounts to the new blacklist data structure
        // and remove them from the old blacklist data structure.
        for (uint256 i = 0; i < accountsToBlacklist.length; i++) {
            require(
                _deprecatedBlacklisted[accountsToBlacklist[i]],
                "FiatTokenV2_2: Blacklisting previously unblacklisted account!"
            );
            _blacklist(accountsToBlacklist[i]);
            delete _deprecatedBlacklisted[accountsToBlacklist[i]];
        }
        _blacklist(address(this));
        delete _deprecatedBlacklisted[address(this)];
        _initializedVersion = 3;
    }
    /**
     * @dev Internal function to get the current chain id.
     * @return The current chain id.
     */
    function _chainId() internal virtual view returns (uint256) {
        uint256 chainId;
        assembly {
            chainId := chainid()
        }
        return chainId;
    }
    /**
     * @inheritdoc EIP712Domain
     */
    function _domainSeparator() internal override view returns (bytes32) {
        return EIP712.makeDomainSeparator(name, "2", _chainId());
    }
    /**
     * @notice Update allowance with a signed permit
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param owner       Token owner's address (Authorizer)
     * @param spender     Spender's address
     * @param value       Amount of allowance
     * @param deadline    The time at which the signature expires (unix time), or max uint256 value to signal no expiration
     * @param signature   Signature bytes signed by an EOA wallet or a contract wallet
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        bytes memory signature
    ) external whenNotPaused {
        _permit(owner, spender, value, deadline, signature);
    }
    /**
     * @notice Execute a transfer with a signed authorization
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param signature     Signature bytes signed by an EOA wallet or a contract wallet
     */
    function transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        bytes memory signature
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _transferWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            signature
        );
    }
    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * EOA wallet signatures should be packed in the order of r, s, v.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param signature     Signature bytes signed by an EOA wallet or a contract wallet
     */
    function receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        bytes memory signature
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _receiveWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            signature
        );
    }
    /**
     * @notice Attempt to cancel an authorization
     * @dev Works only if the authorization is not yet used.
     * EOA wallet signatures should be packed in the order of r, s, v.
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param signature     Signature bytes signed by an EOA wallet or a contract wallet
     */
    function cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        bytes memory signature
    ) external whenNotPaused {
        _cancelAuthorization(authorizer, nonce, signature);
    }
    /**
     * @dev Helper method that sets the blacklist state of an account on balanceAndBlacklistStates.
     * If _shouldBlacklist is true, we apply a (1 << 255) bitmask with an OR operation on the
     * account's balanceAndBlacklistState. This flips the high bit for the account to 1,
     * indicating that the account is blacklisted.
     *
     * If _shouldBlacklist if false, we reset the account's balanceAndBlacklistStates to their
     * balances. This clears the high bit for the account, indicating that the account is unblacklisted.
     * @param _account         The address of the account.
     * @param _shouldBlacklist True if the account should be blacklisted, false if the account should be unblacklisted.
     */
    function _setBlacklistState(address _account, bool _shouldBlacklist)
        internal
        override
    {
        balanceAndBlacklistStates[_account] = _shouldBlacklist
            ? balanceAndBlacklistStates[_account] | (1 << 255)
            : _balanceOf(_account);
    }
    /**
     * @dev Helper method that sets the balance of an account on balanceAndBlacklistStates.
     * Since balances are stored in the last 255 bits of the balanceAndBlacklistStates value,
     * we need to ensure that the updated balance does not exceed (2^255 - 1).
     * Since blacklisted accounts' balances cannot be updated, the method will also
     * revert if the account is blacklisted
     * @param _account The address of the account.
     * @param _balance The new fiat token balance of the account (max: (2^255 - 1)).
     */
    function _setBalance(address _account, uint256 _balance) internal override {
        require(
            _balance <= ((1 << 255) - 1),
            "FiatTokenV2_2: Balance exceeds (2^255 - 1)"
        );
        require(
            !_isBlacklisted(_account),
            "FiatTokenV2_2: Account is blacklisted"
        );
        balanceAndBlacklistStates[_account] = _balance;
    }
    /**
     * @inheritdoc Blacklistable
     */
    function _isBlacklisted(address _account)
        internal
        override
        view
        returns (bool)
    {
        return balanceAndBlacklistStates[_account] >> 255 == 1;
    }
    /**
     * @dev Helper method to obtain the balance of an account. Since balances
     * are stored in the last 255 bits of the balanceAndBlacklistStates value,
     * we apply a ((1 << 255) - 1) bit bitmask with an AND operation on the
     * balanceAndBlacklistState to obtain the balance.
     * @param _account  The address of the account.
     * @return          The fiat token balance of the account.
     */
    function _balanceOf(address _account)
        internal
        override
        view
        returns (uint256)
    {
        return balanceAndBlacklistStates[_account] & ((1 << 255) - 1);
    }
    /**
     * @inheritdoc FiatTokenV1
     */
    function approve(address spender, uint256 value)
        external
        override
        whenNotPaused
        returns (bool)
    {
        _approve(msg.sender, spender, value);
        return true;
    }
    /**
     * @inheritdoc FiatTokenV2
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external override whenNotPaused {
        _permit(owner, spender, value, deadline, v, r, s);
    }
    /**
     * @inheritdoc FiatTokenV2
     */
    function increaseAllowance(address spender, uint256 increment)
        external
        override
        whenNotPaused
        returns (bool)
    {
        _increaseAllowance(msg.sender, spender, increment);
        return true;
    }
    /**
     * @inheritdoc FiatTokenV2
     */
    function decreaseAllowance(address spender, uint256 decrement)
        external
        override
        whenNotPaused
        returns (bool)
    {
        _decreaseAllowance(msg.sender, spender, decrement);
        return true;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2 <0.8.0;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.
        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";
/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }
    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.
        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }
    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }
    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }
    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }
    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { FiatTokenV2 } from "./FiatTokenV2.sol";
// solhint-disable func-name-mixedcase
/**
 * @title FiatToken V2.1
 * @notice ERC20 Token backed by fiat reserves, version 2.1
 */
contract FiatTokenV2_1 is FiatTokenV2 {
    /**
     * @notice Initialize v2.1
     * @param lostAndFound  The address to which the locked funds are sent
     */
    function initializeV2_1(address lostAndFound) external {
        // solhint-disable-next-line reason-string
        require(_initializedVersion == 1);
        uint256 lockedAmount = _balanceOf(address(this));
        if (lockedAmount > 0) {
            _transfer(address(this), lostAndFound, lockedAmount);
        }
        _blacklist(address(this));
        _initializedVersion = 2;
    }
    /**
     * @notice Version string for the EIP712 domain separator
     * @return Version string
     */
    function version() external pure returns (string memory) {
        return "2";
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { FiatTokenV1_1 } from "../v1.1/FiatTokenV1_1.sol";
import { EIP712 } from "../util/EIP712.sol";
import { EIP3009 } from "./EIP3009.sol";
import { EIP2612 } from "./EIP2612.sol";
/**
 * @title FiatToken V2
 * @notice ERC20 Token backed by fiat reserves, version 2
 */
contract FiatTokenV2 is FiatTokenV1_1, EIP3009, EIP2612 {
    uint8 internal _initializedVersion;
    /**
     * @notice Initialize v2
     * @param newName   New token name
     */
    function initializeV2(string calldata newName) external {
        // solhint-disable-next-line reason-string
        require(initialized && _initializedVersion == 0);
        name = newName;
        _DEPRECATED_CACHED_DOMAIN_SEPARATOR = EIP712.makeDomainSeparator(
            newName,
            "2"
        );
        _initializedVersion = 1;
    }
    /**
     * @notice Increase the allowance by a given increment
     * @param spender   Spender's address
     * @param increment Amount of increase in allowance
     * @return True if successful
     */
    function increaseAllowance(address spender, uint256 increment)
        external
        virtual
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(spender)
        returns (bool)
    {
        _increaseAllowance(msg.sender, spender, increment);
        return true;
    }
    /**
     * @notice Decrease the allowance by a given decrement
     * @param spender   Spender's address
     * @param decrement Amount of decrease in allowance
     * @return True if successful
     */
    function decreaseAllowance(address spender, uint256 decrement)
        external
        virtual
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(spender)
        returns (bool)
    {
        _decreaseAllowance(msg.sender, spender, decrement);
        return true;
    }
    /**
     * @notice Execute a transfer with a signed authorization
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _transferWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            v,
            r,
            s
        );
    }
    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _receiveWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            v,
            r,
            s
        );
    }
    /**
     * @notice Attempt to cancel an authorization
     * @dev Works only if the authorization is not yet used.
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external whenNotPaused {
        _cancelAuthorization(authorizer, nonce, v, r, s);
    }
    /**
     * @notice Update allowance with a signed permit
     * @param owner       Token owner's address (Authorizer)
     * @param spender     Spender's address
     * @param value       Amount of allowance
     * @param deadline    The time at which the signature expires (unix time), or max uint256 value to signal no expiration
     * @param v           v of the signature
     * @param r           r of the signature
     * @param s           s of the signature
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    )
        external
        virtual
        whenNotPaused
        notBlacklisted(owner)
        notBlacklisted(spender)
    {
        _permit(owner, spender, value, deadline, v, r, s);
    }
    /**
     * @dev Internal function to increase the allowance by a given increment
     * @param owner     Token owner's address
     * @param spender   Spender's address
     * @param increment Amount of increase
     */
    function _increaseAllowance(
        address owner,
        address spender,
        uint256 increment
    ) internal override {
        _approve(owner, spender, allowed[owner][spender].add(increment));
    }
    /**
     * @dev Internal function to decrease the allowance by a given decrement
     * @param owner     Token owner's address
     * @param spender   Spender's address
     * @param decrement Amount of decrease
     */
    function _decreaseAllowance(
        address owner,
        address spender,
        uint256 decrement
    ) internal override {
        _approve(
            owner,
            spender,
            allowed[owner][spender].sub(
                decrement,
                "ERC20: decreased allowance below zero"
            )
        );
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
// solhint-disable func-name-mixedcase
/**
 * @title EIP712 Domain
 */
contract EIP712Domain {
    // was originally DOMAIN_SEPARATOR
    // but that has been moved to a method so we can override it in V2_2+
    bytes32 internal _DEPRECATED_CACHED_DOMAIN_SEPARATOR;
    /**
     * @notice Get the EIP712 Domain Separator.
     * @return The bytes32 EIP712 domain separator.
     */
    function DOMAIN_SEPARATOR() external view returns (bytes32) {
        return _domainSeparator();
    }
    /**
     * @dev Internal method to get the EIP712 Domain Separator.
     * @return The bytes32 EIP712 domain separator.
     */
    function _domainSeparator() internal virtual view returns (bytes32) {
        return _DEPRECATED_CACHED_DOMAIN_SEPARATOR;
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { AbstractFiatTokenV2 } from "./AbstractFiatTokenV2.sol";
import { EIP712Domain } from "./EIP712Domain.sol";
import { SignatureChecker } from "../util/SignatureChecker.sol";
import { MessageHashUtils } from "../util/MessageHashUtils.sol";
/**
 * @title EIP-3009
 * @notice Provide internal implementation for gas-abstracted transfers
 * @dev Contracts that inherit from this must wrap these with publicly
 * accessible functions, optionally adding modifiers where necessary
 */
abstract contract EIP3009 is AbstractFiatTokenV2, EIP712Domain {
    // keccak256("TransferWithAuthorization(address from,address to,uint256 value,uint256 validAfter,uint256 validBefore,bytes32 nonce)")
    bytes32
        public constant TRANSFER_WITH_AUTHORIZATION_TYPEHASH = 0x7c7c6cdb67a18743f49ec6fa9b35f50d52ed05cbed4cc592e13b44501c1a2267;
    // keccak256("ReceiveWithAuthorization(address from,address to,uint256 value,uint256 validAfter,uint256 validBefore,bytes32 nonce)")
    bytes32
        public constant RECEIVE_WITH_AUTHORIZATION_TYPEHASH = 0xd099cc98ef71107a616c4f0f941f04c322d8e254fe26b3c6668db87aae413de8;
    // keccak256("CancelAuthorization(address authorizer,bytes32 nonce)")
    bytes32
        public constant CANCEL_AUTHORIZATION_TYPEHASH = 0x158b0a9edf7a828aad02f63cd515c68ef2f50ba807396f6d12842833a1597429;
    /**
     * @dev authorizer address => nonce => bool (true if nonce is used)
     */
    mapping(address => mapping(bytes32 => bool)) private _authorizationStates;
    event AuthorizationUsed(address indexed authorizer, bytes32 indexed nonce);
    event AuthorizationCanceled(
        address indexed authorizer,
        bytes32 indexed nonce
    );
    /**
     * @notice Returns the state of an authorization
     * @dev Nonces are randomly generated 32-byte data unique to the
     * authorizer's address
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @return True if the nonce is used
     */
    function authorizationState(address authorizer, bytes32 nonce)
        external
        view
        returns (bool)
    {
        return _authorizationStates[authorizer][nonce];
    }
    /**
     * @notice Execute a transfer with a signed authorization
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function _transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _transferWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            abi.encodePacked(r, s, v)
        );
    }
    /**
     * @notice Execute a transfer with a signed authorization
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param signature     Signature byte array produced by an EOA wallet or a contract wallet
     */
    function _transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        bytes memory signature
    ) internal {
        _requireValidAuthorization(from, nonce, validAfter, validBefore);
        _requireValidSignature(
            from,
            keccak256(
                abi.encode(
                    TRANSFER_WITH_AUTHORIZATION_TYPEHASH,
                    from,
                    to,
                    value,
                    validAfter,
                    validBefore,
                    nonce
                )
            ),
            signature
        );
        _markAuthorizationAsUsed(from, nonce);
        _transfer(from, to, value);
    }
    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function _receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _receiveWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            abi.encodePacked(r, s, v)
        );
    }
    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * EOA wallet signatures should be packed in the order of r, s, v.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param signature     Signature byte array produced by an EOA wallet or a contract wallet
     */
    function _receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        bytes memory signature
    ) internal {
        require(to == msg.sender, "FiatTokenV2: caller must be the payee");
        _requireValidAuthorization(from, nonce, validAfter, validBefore);
        _requireValidSignature(
            from,
            keccak256(
                abi.encode(
                    RECEIVE_WITH_AUTHORIZATION_TYPEHASH,
                    from,
                    to,
                    value,
                    validAfter,
                    validBefore,
                    nonce
                )
            ),
            signature
        );
        _markAuthorizationAsUsed(from, nonce);
        _transfer(from, to, value);
    }
    /**
     * @notice Attempt to cancel an authorization
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function _cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _cancelAuthorization(authorizer, nonce, abi.encodePacked(r, s, v));
    }
    /**
     * @notice Attempt to cancel an authorization
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param signature     Signature byte array produced by an EOA wallet or a contract wallet
     */
    function _cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        bytes memory signature
    ) internal {
        _requireUnusedAuthorization(authorizer, nonce);
        _requireValidSignature(
            authorizer,
            keccak256(
                abi.encode(CANCEL_AUTHORIZATION_TYPEHASH, authorizer, nonce)
            ),
            signature
        );
        _authorizationStates[authorizer][nonce] = true;
        emit AuthorizationCanceled(authorizer, nonce);
    }
    /**
     * @notice Validates that signature against input data struct
     * @param signer        Signer's address
     * @param dataHash      Hash of encoded data struct
     * @param signature     Signature byte array produced by an EOA wallet or a contract wallet
     */
    function _requireValidSignature(
        address signer,
        bytes32 dataHash,
        bytes memory signature
    ) private view {
        require(
            SignatureChecker.isValidSignatureNow(
                signer,
                MessageHashUtils.toTypedDataHash(_domainSeparator(), dataHash),
                signature
            ),
            "FiatTokenV2: invalid signature"
        );
    }
    /**
     * @notice Check that an authorization is unused
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     */
    function _requireUnusedAuthorization(address authorizer, bytes32 nonce)
        private
        view
    {
        require(
            !_authorizationStates[authorizer][nonce],
            "FiatTokenV2: authorization is used or canceled"
        );
    }
    /**
     * @notice Check that authorization is valid
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     */
    function _requireValidAuthorization(
        address authorizer,
        bytes32 nonce,
        uint256 validAfter,
        uint256 validBefore
    ) private view {
        require(
            now > validAfter,
            "FiatTokenV2: authorization is not yet valid"
        );
        require(now < validBefore, "FiatTokenV2: authorization is expired");
        _requireUnusedAuthorization(authorizer, nonce);
    }
    /**
     * @notice Mark an authorization as used
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     */
    function _markAuthorizationAsUsed(address authorizer, bytes32 nonce)
        private
    {
        _authorizationStates[authorizer][nonce] = true;
        emit AuthorizationUsed(authorizer, nonce);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { AbstractFiatTokenV2 } from "./AbstractFiatTokenV2.sol";
import { EIP712Domain } from "./EIP712Domain.sol";
import { MessageHashUtils } from "../util/MessageHashUtils.sol";
import { SignatureChecker } from "../util/SignatureChecker.sol";
/**
 * @title EIP-2612
 * @notice Provide internal implementation for gas-abstracted approvals
 */
abstract contract EIP2612 is AbstractFiatTokenV2, EIP712Domain {
    // keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)")
    bytes32
        public constant PERMIT_TYPEHASH = 0x6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9;
    mapping(address => uint256) private _permitNonces;
    /**
     * @notice Nonces for permit
     * @param owner Token owner's address (Authorizer)
     * @return Next nonce
     */
    function nonces(address owner) external view returns (uint256) {
        return _permitNonces[owner];
    }
    /**
     * @notice Verify a signed approval permit and execute if valid
     * @param owner     Token owner's address (Authorizer)
     * @param spender   Spender's address
     * @param value     Amount of allowance
     * @param deadline  The time at which the signature expires (unix time), or max uint256 value to signal no expiration
     * @param v         v of the signature
     * @param r         r of the signature
     * @param s         s of the signature
     */
    function _permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _permit(owner, spender, value, deadline, abi.encodePacked(r, s, v));
    }
    /**
     * @notice Verify a signed approval permit and execute if valid
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param owner      Token owner's address (Authorizer)
     * @param spender    Spender's address
     * @param value      Amount of allowance
     * @param deadline   The time at which the signature expires (unix time), or max uint256 value to signal no expiration
     * @param signature  Signature byte array signed by an EOA wallet or a contract wallet
     */
    function _permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        bytes memory signature
    ) internal {
        require(
            deadline == type(uint256).max || deadline >= now,
            "FiatTokenV2: permit is expired"
        );
        bytes32 typedDataHash = MessageHashUtils.toTypedDataHash(
            _domainSeparator(),
            keccak256(
                abi.encode(
                    PERMIT_TYPEHASH,
                    owner,
                    spender,
                    value,
                    _permitNonces[owner]++,
                    deadline
                )
            )
        );
        require(
            SignatureChecker.isValidSignatureNow(
                owner,
                typedDataHash,
                signature
            ),
            "EIP2612: invalid signature"
        );
        _approve(owner, spender, value);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { AbstractFiatTokenV1 } from "../v1/AbstractFiatTokenV1.sol";
abstract contract AbstractFiatTokenV2 is AbstractFiatTokenV1 {
    function _increaseAllowance(
        address owner,
        address spender,
        uint256 increment
    ) internal virtual;
    function _decreaseAllowance(
        address owner,
        address spender,
        uint256 decrement
    ) internal virtual;
}
/**
 * SPDX-License-Identifier: MIT
 *
 * Copyright (c) 2016 Smart Contract Solutions, Inc.
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */
pragma solidity 0.6.12;
import { Ownable } from "./Ownable.sol";
/**
 * @notice Base contract which allows children to implement an emergency stop
 * mechanism
 * @dev Forked from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/feb665136c0dae9912e08397c1a21c4af3651ef3/contracts/lifecycle/Pausable.sol
 * Modifications:
 * 1. Added pauser role, switched pause/unpause to be onlyPauser (6/14/2018)
 * 2. Removed whenNotPause/whenPaused from pause/unpause (6/14/2018)
 * 3. Removed whenPaused (6/14/2018)
 * 4. Switches ownable library to use ZeppelinOS (7/12/18)
 * 5. Remove constructor (7/13/18)
 * 6. Reformat, conform to Solidity 0.6 syntax and add error messages (5/13/20)
 * 7. Make public functions external (5/27/20)
 */
contract Pausable is Ownable {
    event Pause();
    event Unpause();
    event PauserChanged(address indexed newAddress);
    address public pauser;
    bool public paused = false;
    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     */
    modifier whenNotPaused() {
        require(!paused, "Pausable: paused");
        _;
    }
    /**
     * @dev throws if called by any account other than the pauser
     */
    modifier onlyPauser() {
        require(msg.sender == pauser, "Pausable: caller is not the pauser");
        _;
    }
    /**
     * @dev called by the owner to pause, triggers stopped state
     */
    function pause() external onlyPauser {
        paused = true;
        emit Pause();
    }
    /**
     * @dev called by the owner to unpause, returns to normal state
     */
    function unpause() external onlyPauser {
        paused = false;
        emit Unpause();
    }
    /**
     * @notice Updates the pauser address.
     * @param _newPauser The address of the new pauser.
     */
    function updatePauser(address _newPauser) external onlyOwner {
        require(
            _newPauser != address(0),
            "Pausable: new pauser is the zero address"
        );
        pauser = _newPauser;
        emit PauserChanged(pauser);
    }
}
/**
 * SPDX-License-Identifier: MIT
 *
 * Copyright (c) 2018 zOS Global Limited.
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */
pragma solidity 0.6.12;
/**
 * @notice The Ownable contract has an owner address, and provides basic
 * authorization control functions
 * @dev Forked from https://github.com/OpenZeppelin/openzeppelin-labs/blob/3887ab77b8adafba4a26ace002f3a684c1a3388b/upgradeability_ownership/contracts/ownership/Ownable.sol
 * Modifications:
 * 1. Consolidate OwnableStorage into this contract (7/13/18)
 * 2. Reformat, conform to Solidity 0.6 syntax, and add error messages (5/13/20)
 * 3. Make public functions external (5/27/20)
 */
contract Ownable {
    // Owner of the contract
    address private _owner;
    /**
     * @dev Event to show ownership has been transferred
     * @param previousOwner representing the address of the previous owner
     * @param newOwner representing the address of the new owner
     */
    event OwnershipTransferred(address previousOwner, address newOwner);
    /**
     * @dev The constructor sets the original owner of the contract to the sender account.
     */
    constructor() public {
        setOwner(msg.sender);
    }
    /**
     * @dev Tells the address of the owner
     * @return the address of the owner
     */
    function owner() external view returns (address) {
        return _owner;
    }
    /**
     * @dev Sets a new owner address
     */
    function setOwner(address newOwner) internal {
        _owner = newOwner;
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(msg.sender == _owner, "Ownable: caller is not the owner");
        _;
    }
    /**
     * @dev Allows the current owner to transfer control of the contract to a newOwner.
     * @param newOwner The address to transfer ownership to.
     */
    function transferOwnership(address newOwner) external onlyOwner {
        require(
            newOwner != address(0),
            "Ownable: new owner is the zero address"
        );
        emit OwnershipTransferred(_owner, newOwner);
        setOwner(newOwner);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";
import { AbstractFiatTokenV1 } from "./AbstractFiatTokenV1.sol";
import { Ownable } from "./Ownable.sol";
import { Pausable } from "./Pausable.sol";
import { Blacklistable } from "./Blacklistable.sol";
/**
 * @title FiatToken
 * @dev ERC20 Token backed by fiat reserves
 */
contract FiatTokenV1 is AbstractFiatTokenV1, Ownable, Pausable, Blacklistable {
    using SafeMath for uint256;
    string public name;
    string public symbol;
    uint8 public decimals;
    string public currency;
    address public masterMinter;
    bool internal initialized;
    /// @dev A mapping that stores the balance and blacklist states for a given address.
    /// The first bit defines whether the address is blacklisted (1 if blacklisted, 0 otherwise).
    /// The last 255 bits define the balance for the address.
    mapping(address => uint256) internal balanceAndBlacklistStates;
    mapping(address => mapping(address => uint256)) internal allowed;
    uint256 internal totalSupply_ = 0;
    mapping(address => bool) internal minters;
    mapping(address => uint256) internal minterAllowed;
    event Mint(address indexed minter, address indexed to, uint256 amount);
    event Burn(address indexed burner, uint256 amount);
    event MinterConfigured(address indexed minter, uint256 minterAllowedAmount);
    event MinterRemoved(address indexed oldMinter);
    event MasterMinterChanged(address indexed newMasterMinter);
    /**
     * @notice Initializes the fiat token contract.
     * @param tokenName       The name of the fiat token.
     * @param tokenSymbol     The symbol of the fiat token.
     * @param tokenCurrency   The fiat currency that the token represents.
     * @param tokenDecimals   The number of decimals that the token uses.
     * @param newMasterMinter The masterMinter address for the fiat token.
     * @param newPauser       The pauser address for the fiat token.
     * @param newBlacklister  The blacklister address for the fiat token.
     * @param newOwner        The owner of the fiat token.
     */
    function initialize(
        string memory tokenName,
        string memory tokenSymbol,
        string memory tokenCurrency,
        uint8 tokenDecimals,
        address newMasterMinter,
        address newPauser,
        address newBlacklister,
        address newOwner
    ) public {
        require(!initialized, "FiatToken: contract is already initialized");
        require(
            newMasterMinter != address(0),
            "FiatToken: new masterMinter is the zero address"
        );
        require(
            newPauser != address(0),
            "FiatToken: new pauser is the zero address"
        );
        require(
            newBlacklister != address(0),
            "FiatToken: new blacklister is the zero address"
        );
        require(
            newOwner != address(0),
            "FiatToken: new owner is the zero address"
        );
        name = tokenName;
        symbol = tokenSymbol;
        currency = tokenCurrency;
        decimals = tokenDecimals;
        masterMinter = newMasterMinter;
        pauser = newPauser;
        blacklister = newBlacklister;
        setOwner(newOwner);
        initialized = true;
    }
    /**
     * @dev Throws if called by any account other than a minter.
     */
    modifier onlyMinters() {
        require(minters[msg.sender], "FiatToken: caller is not a minter");
        _;
    }
    /**
     * @notice Mints fiat tokens to an address.
     * @param _to The address that will receive the minted tokens.
     * @param _amount The amount of tokens to mint. Must be less than or equal
     * to the minterAllowance of the caller.
     * @return True if the operation was successful.
     */
    function mint(address _to, uint256 _amount)
        external
        whenNotPaused
        onlyMinters
        notBlacklisted(msg.sender)
        notBlacklisted(_to)
        returns (bool)
    {
        require(_to != address(0), "FiatToken: mint to the zero address");
        require(_amount > 0, "FiatToken: mint amount not greater than 0");
        uint256 mintingAllowedAmount = minterAllowed[msg.sender];
        require(
            _amount <= mintingAllowedAmount,
            "FiatToken: mint amount exceeds minterAllowance"
        );
        totalSupply_ = totalSupply_.add(_amount);
        _setBalance(_to, _balanceOf(_to).add(_amount));
        minterAllowed[msg.sender] = mintingAllowedAmount.sub(_amount);
        emit Mint(msg.sender, _to, _amount);
        emit Transfer(address(0), _to, _amount);
        return true;
    }
    /**
     * @dev Throws if called by any account other than the masterMinter
     */
    modifier onlyMasterMinter() {
        require(
            msg.sender == masterMinter,
            "FiatToken: caller is not the masterMinter"
        );
        _;
    }
    /**
     * @notice Gets the minter allowance for an account.
     * @param minter The address to check.
     * @return The remaining minter allowance for the account.
     */
    function minterAllowance(address minter) external view returns (uint256) {
        return minterAllowed[minter];
    }
    /**
     * @notice Checks if an account is a minter.
     * @param account The address to check.
     * @return True if the account is a minter, false if the account is not a minter.
     */
    function isMinter(address account) external view returns (bool) {
        return minters[account];
    }
    /**
     * @notice Gets the remaining amount of fiat tokens a spender is allowed to transfer on
     * behalf of the token owner.
     * @param owner   The token owner's address.
     * @param spender The spender's address.
     * @return The remaining allowance.
     */
    function allowance(address owner, address spender)
        external
        override
        view
        returns (uint256)
    {
        return allowed[owner][spender];
    }
    /**
     * @notice Gets the totalSupply of the fiat token.
     * @return The totalSupply of the fiat token.
     */
    function totalSupply() external override view returns (uint256) {
        return totalSupply_;
    }
    /**
     * @notice Gets the fiat token balance of an account.
     * @param account  The address to check.
     * @return balance The fiat token balance of the account.
     */
    function balanceOf(address account)
        external
        override
        view
        returns (uint256)
    {
        return _balanceOf(account);
    }
    /**
     * @notice Sets a fiat token allowance for a spender to spend on behalf of the caller.
     * @param spender The spender's address.
     * @param value   The allowance amount.
     * @return True if the operation was successful.
     */
    function approve(address spender, uint256 value)
        external
        virtual
        override
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(spender)
        returns (bool)
    {
        _approve(msg.sender, spender, value);
        return true;
    }
    /**
     * @dev Internal function to set allowance.
     * @param owner     Token owner's address.
     * @param spender   Spender's address.
     * @param value     Allowance amount.
     */
    function _approve(
        address owner,
        address spender,
        uint256 value
    ) internal override {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");
        allowed[owner][spender] = value;
        emit Approval(owner, spender, value);
    }
    /**
     * @notice Transfers tokens from an address to another by spending the caller's allowance.
     * @dev The caller must have some fiat token allowance on the payer's tokens.
     * @param from  Payer's address.
     * @param to    Payee's address.
     * @param value Transfer amount.
     * @return True if the operation was successful.
     */
    function transferFrom(
        address from,
        address to,
        uint256 value
    )
        external
        override
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(from)
        notBlacklisted(to)
        returns (bool)
    {
        require(
            value <= allowed[from][msg.sender],
            "ERC20: transfer amount exceeds allowance"
        );
        _transfer(from, to, value);
        allowed[from][msg.sender] = allowed[from][msg.sender].sub(value);
        return true;
    }
    /**
     * @notice Transfers tokens from the caller.
     * @param to    Payee's address.
     * @param value Transfer amount.
     * @return True if the operation was successful.
     */
    function transfer(address to, uint256 value)
        external
        override
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(to)
        returns (bool)
    {
        _transfer(msg.sender, to, value);
        return true;
    }
    /**
     * @dev Internal function to process transfers.
     * @param from  Payer's address.
     * @param to    Payee's address.
     * @param value Transfer amount.
     */
    function _transfer(
        address from,
        address to,
        uint256 value
    ) internal override {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");
        require(
            value <= _balanceOf(from),
            "ERC20: transfer amount exceeds balance"
        );
        _setBalance(from, _balanceOf(from).sub(value));
        _setBalance(to, _balanceOf(to).add(value));
        emit Transfer(from, to, value);
    }
    /**
     * @notice Adds or updates a new minter with a mint allowance.
     * @param minter The address of the minter.
     * @param minterAllowedAmount The minting amount allowed for the minter.
     * @return True if the operation was successful.
     */
    function configureMinter(address minter, uint256 minterAllowedAmount)
        external
        whenNotPaused
        onlyMasterMinter
        returns (bool)
    {
        minters[minter] = true;
        minterAllowed[minter] = minterAllowedAmount;
        emit MinterConfigured(minter, minterAllowedAmount);
        return true;
    }
    /**
     * @notice Removes a minter.
     * @param minter The address of the minter to remove.
     * @return True if the operation was successful.
     */
    function removeMinter(address minter)
        external
        onlyMasterMinter
        returns (bool)
    {
        minters[minter] = false;
        minterAllowed[minter] = 0;
        emit MinterRemoved(minter);
        return true;
    }
    /**
     * @notice Allows a minter to burn some of its own tokens.
     * @dev The caller must be a minter, must not be blacklisted, and the amount to burn
     * should be less than or equal to the account's balance.
     * @param _amount the amount of tokens to be burned.
     */
    function burn(uint256 _amount)
        external
        whenNotPaused
        onlyMinters
        notBlacklisted(msg.sender)
    {
        uint256 balance = _balanceOf(msg.sender);
        require(_amount > 0, "FiatToken: burn amount not greater than 0");
        require(balance >= _amount, "FiatToken: burn amount exceeds balance");
        totalSupply_ = totalSupply_.sub(_amount);
        _setBalance(msg.sender, balance.sub(_amount));
        emit Burn(msg.sender, _amount);
        emit Transfer(msg.sender, address(0), _amount);
    }
    /**
     * @notice Updates the master minter address.
     * @param _newMasterMinter The address of the new master minter.
     */
    function updateMasterMinter(address _newMasterMinter) external onlyOwner {
        require(
            _newMasterMinter != address(0),
            "FiatToken: new masterMinter is the zero address"
        );
        masterMinter = _newMasterMinter;
        emit MasterMinterChanged(masterMinter);
    }
    /**
     * @inheritdoc Blacklistable
     */
    function _blacklist(address _account) internal override {
        _setBlacklistState(_account, true);
    }
    /**
     * @inheritdoc Blacklistable
     */
    function _unBlacklist(address _account) internal override {
        _setBlacklistState(_account, false);
    }
    /**
     * @dev Helper method that sets the blacklist state of an account.
     * @param _account         The address of the account.
     * @param _shouldBlacklist True if the account should be blacklisted, false if the account should be unblacklisted.
     */
    function _setBlacklistState(address _account, bool _shouldBlacklist)
        internal
        virtual
    {
        _deprecatedBlacklisted[_account] = _shouldBlacklist;
    }
    /**
     * @dev Helper method that sets the balance of an account.
     * @param _account The address of the account.
     * @param _balance The new fiat token balance of the account.
     */
    function _setBalance(address _account, uint256 _balance) internal virtual {
        balanceAndBlacklistStates[_account] = _balance;
    }
    /**
     * @inheritdoc Blacklistable
     */
    function _isBlacklisted(address _account)
        internal
        virtual
        override
        view
        returns (bool)
    {
        return _deprecatedBlacklisted[_account];
    }
    /**
     * @dev Helper method to obtain the balance of an account.
     * @param _account  The address of the account.
     * @return          The fiat token balance of the account.
     */
    function _balanceOf(address _account)
        internal
        virtual
        view
        returns (uint256)
    {
        return balanceAndBlacklistStates[_account];
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { Ownable } from "./Ownable.sol";
/**
 * @title Blacklistable Token
 * @dev Allows accounts to be blacklisted by a "blacklister" role
 */
abstract contract Blacklistable is Ownable {
    address public blacklister;
    mapping(address => bool) internal _deprecatedBlacklisted;
    event Blacklisted(address indexed _account);
    event UnBlacklisted(address indexed _account);
    event BlacklisterChanged(address indexed newBlacklister);
    /**
     * @dev Throws if called by any account other than the blacklister.
     */
    modifier onlyBlacklister() {
        require(
            msg.sender == blacklister,
            "Blacklistable: caller is not the blacklister"
        );
        _;
    }
    /**
     * @dev Throws if argument account is blacklisted.
     * @param _account The address to check.
     */
    modifier notBlacklisted(address _account) {
        require(
            !_isBlacklisted(_account),
            "Blacklistable: account is blacklisted"
        );
        _;
    }
    /**
     * @notice Checks if account is blacklisted.
     * @param _account The address to check.
     * @return True if the account is blacklisted, false if the account is not blacklisted.
     */
    function isBlacklisted(address _account) external view returns (bool) {
        return _isBlacklisted(_account);
    }
    /**
     * @notice Adds account to blacklist.
     * @param _account The address to blacklist.
     */
    function blacklist(address _account) external onlyBlacklister {
        _blacklist(_account);
        emit Blacklisted(_account);
    }
    /**
     * @notice Removes account from blacklist.
     * @param _account The address to remove from the blacklist.
     */
    function unBlacklist(address _account) external onlyBlacklister {
        _unBlacklist(_account);
        emit UnBlacklisted(_account);
    }
    /**
     * @notice Updates the blacklister address.
     * @param _newBlacklister The address of the new blacklister.
     */
    function updateBlacklister(address _newBlacklister) external onlyOwner {
        require(
            _newBlacklister != address(0),
            "Blacklistable: new blacklister is the zero address"
        );
        blacklister = _newBlacklister;
        emit BlacklisterChanged(blacklister);
    }
    /**
     * @dev Checks if account is blacklisted.
     * @param _account The address to check.
     * @return true if the account is blacklisted, false otherwise.
     */
    function _isBlacklisted(address _account)
        internal
        virtual
        view
        returns (bool);
    /**
     * @dev Helper method that blacklists an account.
     * @param _account The address to blacklist.
     */
    function _blacklist(address _account) internal virtual;
    /**
     * @dev Helper method that unblacklists an account.
     * @param _account The address to unblacklist.
     */
    function _unBlacklist(address _account) internal virtual;
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
abstract contract AbstractFiatTokenV1 is IERC20 {
    function _approve(
        address owner,
        address spender,
        uint256 value
    ) internal virtual;
    function _transfer(
        address from,
        address to,
        uint256 value
    ) internal virtual;
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { Ownable } from "../v1/Ownable.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
contract Rescuable is Ownable {
    using SafeERC20 for IERC20;
    address private _rescuer;
    event RescuerChanged(address indexed newRescuer);
    /**
     * @notice Returns current rescuer
     * @return Rescuer's address
     */
    function rescuer() external view returns (address) {
        return _rescuer;
    }
    /**
     * @notice Revert if called by any account other than the rescuer.
     */
    modifier onlyRescuer() {
        require(msg.sender == _rescuer, "Rescuable: caller is not the rescuer");
        _;
    }
    /**
     * @notice Rescue ERC20 tokens locked up in this contract.
     * @param tokenContract ERC20 token contract address
     * @param to        Recipient address
     * @param amount    Amount to withdraw
     */
    function rescueERC20(
        IERC20 tokenContract,
        address to,
        uint256 amount
    ) external onlyRescuer {
        tokenContract.safeTransfer(to, amount);
    }
    /**
     * @notice Updates the rescuer address.
     * @param newRescuer The address of the new rescuer.
     */
    function updateRescuer(address newRescuer) external onlyOwner {
        require(
            newRescuer != address(0),
            "Rescuable: new rescuer is the zero address"
        );
        _rescuer = newRescuer;
        emit RescuerChanged(newRescuer);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { FiatTokenV1 } from "../v1/FiatTokenV1.sol";
import { Rescuable } from "./Rescuable.sol";
/**
 * @title FiatTokenV1_1
 * @dev ERC20 Token backed by fiat reserves
 */
contract FiatTokenV1_1 is FiatTokenV1, Rescuable {
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { ECRecover } from "./ECRecover.sol";
import { IERC1271 } from "../interface/IERC1271.sol";
/**
 * @dev Signature verification helper that can be used instead of `ECRecover.recover` to seamlessly support both ECDSA
 * signatures from externally owned accounts (EOAs) as well as ERC1271 signatures from smart contract wallets.
 *
 * Adapted from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/21bb89ef5bfc789b9333eb05e3ba2b7b284ac77c/contracts/utils/cryptography/SignatureChecker.sol
 */
library SignatureChecker {
    /**
     * @dev Checks if a signature is valid for a given signer and data hash. If the signer is a smart contract, the
     * signature is validated against that smart contract using ERC1271, otherwise it's validated using `ECRecover.recover`.
     * @param signer        Address of the claimed signer
     * @param digest        Keccak-256 hash digest of the signed message
     * @param signature     Signature byte array associated with hash
     */
    function isValidSignatureNow(
        address signer,
        bytes32 digest,
        bytes memory signature
    ) external view returns (bool) {
        if (!isContract(signer)) {
            return ECRecover.recover(digest, signature) == signer;
        }
        return isValidERC1271SignatureNow(signer, digest, signature);
    }
    /**
     * @dev Checks if a signature is valid for a given signer and data hash. The signature is validated
     * against the signer smart contract using ERC1271.
     * @param signer        Address of the claimed signer
     * @param digest        Keccak-256 hash digest of the signed message
     * @param signature     Signature byte array associated with hash
     *
     * NOTE: Unlike ECDSA signatures, contract signatures are revocable, and the outcome of this function can thus
     * change through time. It could return true at block N and false at block N+1 (or the opposite).
     */
    function isValidERC1271SignatureNow(
        address signer,
        bytes32 digest,
        bytes memory signature
    ) internal view returns (bool) {
        (bool success, bytes memory result) = signer.staticcall(
            abi.encodeWithSelector(
                IERC1271.isValidSignature.selector,
                digest,
                signature
            )
        );
        return (success &&
            result.length >= 32 &&
            abi.decode(result, (bytes32)) ==
            bytes32(IERC1271.isValidSignature.selector));
    }
    /**
     * @dev Checks if the input address is a smart contract.
     */
    function isContract(address addr) internal view returns (bool) {
        uint256 size;
        assembly {
            size := extcodesize(addr)
        }
        return size > 0;
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
/**
 * @dev Signature message hash utilities for producing digests to be consumed by {ECDSA} recovery or signing.
 *
 * The library provides methods for generating a hash of a message that conforms to the
 * https://eips.ethereum.org/EIPS/eip-191[EIP 191] and https://eips.ethereum.org/EIPS/eip-712[EIP 712]
 * specifications.
 */
library MessageHashUtils {
    /**
     * @dev Returns the keccak256 digest of an EIP-712 typed data (EIP-191 version `0x01`).
     * Adapted from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/21bb89ef5bfc789b9333eb05e3ba2b7b284ac77c/contracts/utils/cryptography/MessageHashUtils.sol
     *
     * The digest is calculated from a `domainSeparator` and a `structHash`, by prefixing them with
     * `\\x19\\x01` and hashing the result. It corresponds to the hash signed by the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`] JSON-RPC method as part of EIP-712.
     *
     * @param domainSeparator    Domain separator
     * @param structHash         Hashed EIP-712 data struct
     * @return digest            The keccak256 digest of an EIP-712 typed data
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash)
        internal
        pure
        returns (bytes32 digest)
    {
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, "\\x19\\x01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            digest := keccak256(ptr, 0x42)
        }
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
/**
 * @title EIP712
 * @notice A library that provides EIP712 helper functions
 */
library EIP712 {
    /**
     * @notice Make EIP712 domain separator
     * @param name      Contract name
     * @param version   Contract version
     * @param chainId   Blockchain ID
     * @return Domain separator
     */
    function makeDomainSeparator(
        string memory name,
        string memory version,
        uint256 chainId
    ) internal view returns (bytes32) {
        return
            keccak256(
                abi.encode(
                    // keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)")
                    0x8b73c3c69bb8fe3d512ecc4cf759cc79239f7b179b0ffacaa9a75d522b39400f,
                    keccak256(bytes(name)),
                    keccak256(bytes(version)),
                    chainId,
                    address(this)
                )
            );
    }
    /**
     * @notice Make EIP712 domain separator
     * @param name      Contract name
     * @param version   Contract version
     * @return Domain separator
     */
    function makeDomainSeparator(string memory name, string memory version)
        internal
        view
        returns (bytes32)
    {
        uint256 chainId;
        assembly {
            chainId := chainid()
        }
        return makeDomainSeparator(name, version, chainId);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
/**
 * @title ECRecover
 * @notice A library that provides a safe ECDSA recovery function
 */
library ECRecover {
    /**
     * @notice Recover signer's address from a signed message
     * @dev Adapted from: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/65e4ffde586ec89af3b7e9140bdc9235d1254853/contracts/cryptography/ECDSA.sol
     * Modifications: Accept v, r, and s as separate arguments
     * @param digest    Keccak-256 hash digest of the signed message
     * @param v         v of the signature
     * @param r         r of the signature
     * @param s         s of the signature
     * @return Signer address
     */
    function recover(
        bytes32 digest,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (281): 0 < s < secp256k1n ÷ 2 + 1, and for v in (282): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (
            uint256(s) >
            0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0
        ) {
            revert("ECRecover: invalid signature 's' value");
        }
        if (v != 27 && v != 28) {
            revert("ECRecover: invalid signature 'v' value");
        }
        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(digest, v, r, s);
        require(signer != address(0), "ECRecover: invalid signature");
        return signer;
    }
    /**
     * @notice Recover signer's address from a signed message
     * @dev Adapted from: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/0053ee040a7ff1dbc39691c9e67a69f564930a88/contracts/utils/cryptography/ECDSA.sol
     * @param digest    Keccak-256 hash digest of the signed message
     * @param signature Signature byte array associated with hash
     * @return Signer address
     */
    function recover(bytes32 digest, bytes memory signature)
        internal
        pure
        returns (address)
    {
        require(signature.length == 65, "ECRecover: invalid signature length");
        bytes32 r;
        bytes32 s;
        uint8 v;
        // ecrecover takes the signature parameters, and the only way to get them
        // currently is to use assembly.
        /// @solidity memory-safe-assembly
        assembly {
            r := mload(add(signature, 0x20))
            s := mload(add(signature, 0x40))
            v := byte(0, mload(add(signature, 0x60)))
        }
        return recover(digest, v, r, s);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
/**
 * @dev Interface of the ERC1271 standard signature validation method for
 * contracts as defined in https://eips.ethereum.org/EIPS/eip-1271[ERC-1271].
 */
interface IERC1271 {
    /**
     * @dev Should return whether the signature provided is valid for the provided data
     * @param hash          Hash of the data to be signed
     * @param signature     Signature byte array associated with the provided data hash
     * @return magicValue   bytes4 magic value 0x1626ba7e when function passes
     */
    function isValidSignature(bytes32 hash, bytes memory signature)
        external
        view
        returns (bytes4 magicValue);
}