/**
 *Submitted for verification at Etherscan.io on 2020-09-15
*/

pragma solidity ^0.5.16;
pragma experimental ABIEncoderV2;

// From https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/math/Math.sol
// Subject to the MIT license.

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting with custom message on overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, errorMessage);

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on underflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot underflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction underflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on underflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot underflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, errorMessage);

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers.
     * Reverts on division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers.
     * Reverts with custom message on division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

contract Uni {
    /// @notice EIP-20 token name for this token
    string public constant name = "Uniswap";

    /// @notice EIP-20 token symbol for this token
    string public constant symbol = "UNI";

    /// @notice EIP-20 token decimals for this token
    uint8 public constant decimals = 18;

    /// @notice Total number of tokens in circulation
    uint public totalSupply = 1_000_000_000e18; // 1 billion Uni

    /// @notice Address which may mint new tokens
    address public minter;

    /// @notice The timestamp after which minting may occur
    uint public mintingAllowedAfter;

    /// @notice Minimum time between mints
    uint32 public constant minimumTimeBetweenMints = 1 days * 365;

    /// @notice Cap on the percentage of totalSupply that can be minted at each mint
    uint8 public constant mintCap = 2;

    /// @notice Allowance amounts on behalf of others
    mapping (address => mapping (address => uint96)) internal allowances;

    /// @notice Official record of token balances for each account
    mapping (address => uint96) internal balances;

    /// @notice A record of each accounts delegate
    mapping (address => address) public delegates;

    /// @notice A checkpoint for marking number of votes from a given block
    struct Checkpoint {
        uint32 fromBlock;
        uint96 votes;
    }

    /// @notice A record of votes checkpoints for each account, by index
    mapping (address => mapping (uint32 => Checkpoint)) public checkpoints;

    /// @notice The number of checkpoints for each account
    mapping (address => uint32) public numCheckpoints;

    /// @notice The EIP-712 typehash for the contract's domain
    bytes32 public constant DOMAIN_TYPEHASH = keccak256("EIP712Domain(string name,uint256 chainId,address verifyingContract)");

    /// @notice The EIP-712 typehash for the delegation struct used by the contract
    bytes32 public constant DELEGATION_TYPEHASH = keccak256("Delegation(address delegatee,uint256 nonce,uint256 expiry)");

    /// @notice The EIP-712 typehash for the permit struct used by the contract
    bytes32 public constant PERMIT_TYPEHASH = keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");

    /// @notice A record of states for signing / validating signatures
    mapping (address => uint) public nonces;

    /// @notice An event thats emitted when the minter address is changed
    event MinterChanged(address minter, address newMinter);

    /// @notice An event thats emitted when an account changes its delegate
    event DelegateChanged(address indexed delegator, address indexed fromDelegate, address indexed toDelegate);

    /// @notice An event thats emitted when a delegate account's vote balance changes
    event DelegateVotesChanged(address indexed delegate, uint previousBalance, uint newBalance);

    /// @notice The standard EIP-20 transfer event
    event Transfer(address indexed from, address indexed to, uint256 amount);

    /// @notice The standard EIP-20 approval event
    event Approval(address indexed owner, address indexed spender, uint256 amount);

    /**
     * @notice Construct a new Uni token
     * @param account The initial account to grant all the tokens
     * @param minter_ The account with minting ability
     * @param mintingAllowedAfter_ The timestamp after which minting may occur
     */
    constructor(address account, address minter_, uint mintingAllowedAfter_) public {
        require(mintingAllowedAfter_ >= block.timestamp, "Uni::constructor: minting can only begin after deployment");

        balances[account] = uint96(totalSupply);
        emit Transfer(address(0), account, totalSupply);
        minter = minter_;
        emit MinterChanged(address(0), minter);
        mintingAllowedAfter = mintingAllowedAfter_;
    }

    /**
     * @notice Change the minter address
     * @param minter_ The address of the new minter
     */
    function setMinter(address minter_) external {
        require(msg.sender == minter, "Uni::setMinter: only the minter can change the minter address");
        emit MinterChanged(minter, minter_);
        minter = minter_;
    }

    /**
     * @notice Mint new tokens
     * @param dst The address of the destination account
     * @param rawAmount The number of tokens to be minted
     */
    function mint(address dst, uint rawAmount) external {
        require(msg.sender == minter, "Uni::mint: only the minter can mint");
        require(block.timestamp >= mintingAllowedAfter, "Uni::mint: minting not allowed yet");
        require(dst != address(0), "Uni::mint: cannot transfer to the zero address");

        // record the mint
        mintingAllowedAfter = SafeMath.add(block.timestamp, minimumTimeBetweenMints);

        // mint the amount
        uint96 amount = safe96(rawAmount, "Uni::mint: amount exceeds 96 bits");
        require(amount <= SafeMath.div(SafeMath.mul(totalSupply, mintCap), 100), "Uni::mint: exceeded mint cap");
        totalSupply = safe96(SafeMath.add(totalSupply, amount), "Uni::mint: totalSupply exceeds 96 bits");

        // transfer the amount to the recipient
        balances[dst] = add96(balances[dst], amount, "Uni::mint: transfer amount overflows");
        emit Transfer(address(0), dst, amount);

        // move delegates
        _moveDelegates(address(0), delegates[dst], amount);
    }

    /**
     * @notice Get the number of tokens `spender` is approved to spend on behalf of `account`
     * @param account The address of the account holding the funds
     * @param spender The address of the account spending the funds
     * @return The number of tokens approved
     */
    function allowance(address account, address spender) external view returns (uint) {
        return allowances[account][spender];
    }

    /**
     * @notice Approve `spender` to transfer up to `amount` from `src`
     * @dev This will overwrite the approval amount for `spender`
     *  and is subject to issues noted [here](https://eips.ethereum.org/EIPS/eip-20#approve)
     * @param spender The address of the account which may transfer tokens
     * @param rawAmount The number of tokens that are approved (2^256-1 means infinite)
     * @return Whether or not the approval succeeded
     */
    function approve(address spender, uint rawAmount) external returns (bool) {
        uint96 amount;
        if (rawAmount == uint(-1)) {
            amount = uint96(-1);
        } else {
            amount = safe96(rawAmount, "Uni::approve: amount exceeds 96 bits");
        }

        allowances[msg.sender][spender] = amount;

        emit Approval(msg.sender, spender, amount);
        return true;
    }

    /**
     * @notice Triggers an approval from owner to spends
     * @param owner The address to approve from
     * @param spender The address to be approved
     * @param rawAmount The number of tokens that are approved (2^256-1 means infinite)
     * @param deadline The time at which to expire the signature
     * @param v The recovery byte of the signature
     * @param r Half of the ECDSA signature pair
     * @param s Half of the ECDSA signature pair
     */
    function permit(address owner, address spender, uint rawAmount, uint deadline, uint8 v, bytes32 r, bytes32 s) external {
        uint96 amount;
        if (rawAmount == uint(-1)) {
            amount = uint96(-1);
        } else {
            amount = safe96(rawAmount, "Uni::permit: amount exceeds 96 bits");
        }

        bytes32 domainSeparator = keccak256(abi.encode(DOMAIN_TYPEHASH, keccak256(bytes(name)), getChainId(), address(this)));
        bytes32 structHash = keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, rawAmount, nonces[owner]++, deadline));
        bytes32 digest = keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
        address signatory = ecrecover(digest, v, r, s);
        require(signatory != address(0), "Uni::permit: invalid signature");
        require(signatory == owner, "Uni::permit: unauthorized");
        require(now <= deadline, "Uni::permit: signature expired");

        allowances[owner][spender] = amount;

        emit Approval(owner, spender, amount);
    }

    /**
     * @notice Get the number of tokens held by the `account`
     * @param account The address of the account to get the balance of
     * @return The number of tokens held
     */
    function balanceOf(address account) external view returns (uint) {
        return balances[account];
    }

    /**
     * @notice Transfer `amount` tokens from `msg.sender` to `dst`
     * @param dst The address of the destination account
     * @param rawAmount The number of tokens to transfer
     * @return Whether or not the transfer succeeded
     */
    function transfer(address dst, uint rawAmount) external returns (bool) {
        uint96 amount = safe96(rawAmount, "Uni::transfer: amount exceeds 96 bits");
        _transferTokens(msg.sender, dst, amount);
        return true;
    }

    /**
     * @notice Transfer `amount` tokens from `src` to `dst`
     * @param src The address of the source account
     * @param dst The address of the destination account
     * @param rawAmount The number of tokens to transfer
     * @return Whether or not the transfer succeeded
     */
    function transferFrom(address src, address dst, uint rawAmount) external returns (bool) {
        address spender = msg.sender;
        uint96 spenderAllowance = allowances[src][spender];
        uint96 amount = safe96(rawAmount, "Uni::approve: amount exceeds 96 bits");

        if (spender != src && spenderAllowance != uint96(-1)) {
            uint96 newAllowance = sub96(spenderAllowance, amount, "Uni::transferFrom: transfer amount exceeds spender allowance");
            allowances[src][spender] = newAllowance;

            emit Approval(src, spender, newAllowance);
        }

        _transferTokens(src, dst, amount);
        return true;
    }

    /**
     * @notice Delegate votes from `msg.sender` to `delegatee`
     * @param delegatee The address to delegate votes to
     */
    function delegate(address delegatee) public {
        return _delegate(msg.sender, delegatee);
    }

    /**
     * @notice Delegates votes from signatory to `delegatee`
     * @param delegatee The address to delegate votes to
     * @param nonce The contract state required to match the signature
     * @param expiry The time at which to expire the signature
     * @param v The recovery byte of the signature
     * @param r Half of the ECDSA signature pair
     * @param s Half of the ECDSA signature pair
     */
    function delegateBySig(address delegatee, uint nonce, uint expiry, uint8 v, bytes32 r, bytes32 s) public {
        bytes32 domainSeparator = keccak256(abi.encode(DOMAIN_TYPEHASH, keccak256(bytes(name)), getChainId(), address(this)));
        bytes32 structHash = keccak256(abi.encode(DELEGATION_TYPEHASH, delegatee, nonce, expiry));
        bytes32 digest = keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
        address signatory = ecrecover(digest, v, r, s);
        require(signatory != address(0), "Uni::delegateBySig: invalid signature");
        require(nonce == nonces[signatory]++, "Uni::delegateBySig: invalid nonce");
        require(now <= expiry, "Uni::delegateBySig: signature expired");
        return _delegate(signatory, delegatee);
    }

    /**
     * @notice Gets the current votes balance for `account`
     * @param account The address to get votes balance
     * @return The number of current votes for `account`
     */
    function getCurrentVotes(address account) external view returns (uint96) {
        uint32 nCheckpoints = numCheckpoints[account];
        return nCheckpoints > 0 ? checkpoints[account][nCheckpoints - 1].votes : 0;
    }

    /**
     * @notice Determine the prior number of votes for an account as of a block number
     * @dev Block number must be a finalized block or else this function will revert to prevent misinformation.
     * @param account The address of the account to check
     * @param blockNumber The block number to get the vote balance at
     * @return The number of votes the account had as of the given block
     */
    function getPriorVotes(address account, uint blockNumber) public view returns (uint96) {
        require(blockNumber < block.number, "Uni::getPriorVotes: not yet determined");

        uint32 nCheckpoints = numCheckpoints[account];
        if (nCheckpoints == 0) {
            return 0;
        }

        // First check most recent balance
        if (checkpoints[account][nCheckpoints - 1].fromBlock <= blockNumber) {
            return checkpoints[account][nCheckpoints - 1].votes;
        }

        // Next check implicit zero balance
        if (checkpoints[account][0].fromBlock > blockNumber) {
            return 0;
        }

        uint32 lower = 0;
        uint32 upper = nCheckpoints - 1;
        while (upper > lower) {
            uint32 center = upper - (upper - lower) / 2; // ceil, avoiding overflow
            Checkpoint memory cp = checkpoints[account][center];
            if (cp.fromBlock == blockNumber) {
                return cp.votes;
            } else if (cp.fromBlock < blockNumber) {
                lower = center;
            } else {
                upper = center - 1;
            }
        }
        return checkpoints[account][lower].votes;
    }

    function _delegate(address delegator, address delegatee) internal {
        address currentDelegate = delegates[delegator];
        uint96 delegatorBalance = balances[delegator];
        delegates[delegator] = delegatee;

        emit DelegateChanged(delegator, currentDelegate, delegatee);

        _moveDelegates(currentDelegate, delegatee, delegatorBalance);
    }

    function _transferTokens(address src, address dst, uint96 amount) internal {
        require(src != address(0), "Uni::_transferTokens: cannot transfer from the zero address");
        require(dst != address(0), "Uni::_transferTokens: cannot transfer to the zero address");

        balances[src] = sub96(balances[src], amount, "Uni::_transferTokens: transfer amount exceeds balance");
        balances[dst] = add96(balances[dst], amount, "Uni::_transferTokens: transfer amount overflows");
        emit Transfer(src, dst, amount);

        _moveDelegates(delegates[src], delegates[dst], amount);
    }

    function _moveDelegates(address srcRep, address dstRep, uint96 amount) internal {
        if (srcRep != dstRep && amount > 0) {
            if (srcRep != address(0)) {
                uint32 srcRepNum = numCheckpoints[srcRep];
                uint96 srcRepOld = srcRepNum > 0 ? checkpoints[srcRep][srcRepNum - 1].votes : 0;
                uint96 srcRepNew = sub96(srcRepOld, amount, "Uni::_moveVotes: vote amount underflows");
                _writeCheckpoint(srcRep, srcRepNum, srcRepOld, srcRepNew);
            }

            if (dstRep != address(0)) {
                uint32 dstRepNum = numCheckpoints[dstRep];
                uint96 dstRepOld = dstRepNum > 0 ? checkpoints[dstRep][dstRepNum - 1].votes : 0;
                uint96 dstRepNew = add96(dstRepOld, amount, "Uni::_moveVotes: vote amount overflows");
                _writeCheckpoint(dstRep, dstRepNum, dstRepOld, dstRepNew);
            }
        }
    }

    function _writeCheckpoint(address delegatee, uint32 nCheckpoints, uint96 oldVotes, uint96 newVotes) internal {
      uint32 blockNumber = safe32(block.number, "Uni::_writeCheckpoint: block number exceeds 32 bits");

      if (nCheckpoints > 0 && checkpoints[delegatee][nCheckpoints - 1].fromBlock == blockNumber) {
          checkpoints[delegatee][nCheckpoints - 1].votes = newVotes;
      } else {
          checkpoints[delegatee][nCheckpoints] = Checkpoint(blockNumber, newVotes);
          numCheckpoints[delegatee] = nCheckpoints + 1;
      }

      emit DelegateVotesChanged(delegatee, oldVotes, newVotes);
    }

    function safe32(uint n, string memory errorMessage) internal pure returns (uint32) {
        require(n < 2**32, errorMessage);
        return uint32(n);
    }

    function safe96(uint n, string memory errorMessage) internal pure returns (uint96) {
        require(n < 2**96, errorMessage);
        return uint96(n);
    }

    function add96(uint96 a, uint96 b, string memory errorMessage) internal pure returns (uint96) {
        uint96 c = a + b;
        require(c >= a, errorMessage);
        return c;
    }

    function sub96(uint96 a, uint96 b, string memory errorMessage) internal pure returns (uint96) {
        require(b <= a, errorMessage);
        return a - b;
    }

    function getChainId() internal pure returns (uint) {
        uint256 chainId;
        assembly { chainId := chainid() }
        return chainId;
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.26;
import {Hooks} from "./libraries/Hooks.sol";
import {Pool} from "./libraries/Pool.sol";
import {SafeCast} from "./libraries/SafeCast.sol";
import {Position} from "./libraries/Position.sol";
import {LPFeeLibrary} from "./libraries/LPFeeLibrary.sol";
import {Currency, CurrencyLibrary} from "./types/Currency.sol";
import {PoolKey} from "./types/PoolKey.sol";
import {TickMath} from "./libraries/TickMath.sol";
import {NoDelegateCall} from "./NoDelegateCall.sol";
import {IHooks} from "./interfaces/IHooks.sol";
import {IPoolManager} from "./interfaces/IPoolManager.sol";
import {IUnlockCallback} from "./interfaces/callback/IUnlockCallback.sol";
import {ProtocolFees} from "./ProtocolFees.sol";
import {ERC6909Claims} from "./ERC6909Claims.sol";
import {PoolId} from "./types/PoolId.sol";
import {BalanceDelta, BalanceDeltaLibrary} from "./types/BalanceDelta.sol";
import {BeforeSwapDelta} from "./types/BeforeSwapDelta.sol";
import {Lock} from "./libraries/Lock.sol";
import {CurrencyDelta} from "./libraries/CurrencyDelta.sol";
import {NonzeroDeltaCount} from "./libraries/NonzeroDeltaCount.sol";
import {CurrencyReserves} from "./libraries/CurrencyReserves.sol";
import {Extsload} from "./Extsload.sol";
import {Exttload} from "./Exttload.sol";
import {CustomRevert} from "./libraries/CustomRevert.sol";
//  4
//   44
//     444
//       444                   4444
//        4444            4444     4444
//          4444          4444444    4444                           4
//            4444        44444444     4444                         4
//             44444       4444444       4444444444444444       444444
//           4   44444     44444444       444444444444444444444    4444
//            4    44444    4444444         4444444444444444444444  44444
//             4     444444  4444444         44444444444444444444444 44  4
//              44     44444   444444          444444444444444444444 4     4
//               44      44444   44444           4444444444444444444 4 44
//                44       4444     44             444444444444444     444
//                444     4444                        4444444
//               4444444444444                     44                      4
//              44444444444                        444444     444444444    44
//             444444           4444               4444     4444444444      44
//             4444           44    44              4      44444444444
//            44444          444444444                   444444444444    4444
//            44444          44444444                  4444  44444444    444444
//            44444                                  4444   444444444    44444444
//           44444                                 4444     44444444    4444444444
//          44444                                4444      444444444   444444444444
//         44444                               4444        44444444    444444444444
//       4444444                             4444          44444444         4444444
//      4444444                            44444          44444444          4444444
//     44444444                           44444444444444444444444444444        4444
//   4444444444                           44444444444444444444444444444         444
//  444444444444                         444444444444444444444444444444   444   444
//  44444444444444                                      444444444         44444
// 44444  44444444444         444                       44444444         444444
// 44444  4444444444      4444444444      444444        44444444    444444444444
//  444444444444444      4444  444444    4444444       44444444     444444444444
//  444444444444444     444    444444     444444       44444444      44444444444
//   4444444444444     4444   444444        4444                      4444444444
//    444444444444      4     44444         4444                       444444444
//     44444444444           444444         444                        44444444
//      44444444            444444         4444                         4444444
//                          44444          444                          44444
//                          44444         444      4                    4444
//                          44444        444      44                   444
//                          44444       444      4444
//                           444444  44444        444
//                             444444444           444
//                                                  44444   444
//                                                      444
/// @title PoolManager
/// @notice Holds the state for all pools
contract PoolManager is IPoolManager, ProtocolFees, NoDelegateCall, ERC6909Claims, Extsload, Exttload {
    using SafeCast for *;
    using Pool for *;
    using Hooks for IHooks;
    using CurrencyDelta for Currency;
    using LPFeeLibrary for uint24;
    using CurrencyReserves for Currency;
    using CustomRevert for bytes4;
    int24 private constant MAX_TICK_SPACING = TickMath.MAX_TICK_SPACING;
    int24 private constant MIN_TICK_SPACING = TickMath.MIN_TICK_SPACING;
    mapping(PoolId id => Pool.State) internal _pools;
    /// @notice This will revert if the contract is locked
    modifier onlyWhenUnlocked() {
        if (!Lock.isUnlocked()) ManagerLocked.selector.revertWith();
        _;
    }
    constructor(address initialOwner) ProtocolFees(initialOwner) {}
    /// @inheritdoc IPoolManager
    function unlock(bytes calldata data) external override returns (bytes memory result) {
        if (Lock.isUnlocked()) AlreadyUnlocked.selector.revertWith();
        Lock.unlock();
        // the caller does everything in this callback, including paying what they owe via calls to settle
        result = IUnlockCallback(msg.sender).unlockCallback(data);
        if (NonzeroDeltaCount.read() != 0) CurrencyNotSettled.selector.revertWith();
        Lock.lock();
    }
    /// @inheritdoc IPoolManager
    function initialize(PoolKey memory key, uint160 sqrtPriceX96) external noDelegateCall returns (int24 tick) {
        // see TickBitmap.sol for overflow conditions that can arise from tick spacing being too large
        if (key.tickSpacing > MAX_TICK_SPACING) TickSpacingTooLarge.selector.revertWith(key.tickSpacing);
        if (key.tickSpacing < MIN_TICK_SPACING) TickSpacingTooSmall.selector.revertWith(key.tickSpacing);
        if (key.currency0 >= key.currency1) {
            CurrenciesOutOfOrderOrEqual.selector.revertWith(
                Currency.unwrap(key.currency0), Currency.unwrap(key.currency1)
            );
        }
        if (!key.hooks.isValidHookAddress(key.fee)) Hooks.HookAddressNotValid.selector.revertWith(address(key.hooks));
        uint24 lpFee = key.fee.getInitialLPFee();
        key.hooks.beforeInitialize(key, sqrtPriceX96);
        PoolId id = key.toId();
        tick = _pools[id].initialize(sqrtPriceX96, lpFee);
        // event is emitted before the afterInitialize call to ensure events are always emitted in order
        // emit all details of a pool key. poolkeys are not saved in storage and must always be provided by the caller
        // the key's fee may be a static fee or a sentinel to denote a dynamic fee.
        emit Initialize(id, key.currency0, key.currency1, key.fee, key.tickSpacing, key.hooks, sqrtPriceX96, tick);
        key.hooks.afterInitialize(key, sqrtPriceX96, tick);
    }
    /// @inheritdoc IPoolManager
    function modifyLiquidity(
        PoolKey memory key,
        IPoolManager.ModifyLiquidityParams memory params,
        bytes calldata hookData
    ) external onlyWhenUnlocked noDelegateCall returns (BalanceDelta callerDelta, BalanceDelta feesAccrued) {
        PoolId id = key.toId();
        {
            Pool.State storage pool = _getPool(id);
            pool.checkPoolInitialized();
            key.hooks.beforeModifyLiquidity(key, params, hookData);
            BalanceDelta principalDelta;
            (principalDelta, feesAccrued) = pool.modifyLiquidity(
                Pool.ModifyLiquidityParams({
                    owner: msg.sender,
                    tickLower: params.tickLower,
                    tickUpper: params.tickUpper,
                    liquidityDelta: params.liquidityDelta.toInt128(),
                    tickSpacing: key.tickSpacing,
                    salt: params.salt
                })
            );
            // fee delta and principal delta are both accrued to the caller
            callerDelta = principalDelta + feesAccrued;
        }
        // event is emitted before the afterModifyLiquidity call to ensure events are always emitted in order
        emit ModifyLiquidity(id, msg.sender, params.tickLower, params.tickUpper, params.liquidityDelta, params.salt);
        BalanceDelta hookDelta;
        (callerDelta, hookDelta) = key.hooks.afterModifyLiquidity(key, params, callerDelta, feesAccrued, hookData);
        // if the hook doesn't have the flag to be able to return deltas, hookDelta will always be 0
        if (hookDelta != BalanceDeltaLibrary.ZERO_DELTA) _accountPoolBalanceDelta(key, hookDelta, address(key.hooks));
        _accountPoolBalanceDelta(key, callerDelta, msg.sender);
    }
    /// @inheritdoc IPoolManager
    function swap(PoolKey memory key, IPoolManager.SwapParams memory params, bytes calldata hookData)
        external
        onlyWhenUnlocked
        noDelegateCall
        returns (BalanceDelta swapDelta)
    {
        if (params.amountSpecified == 0) SwapAmountCannotBeZero.selector.revertWith();
        PoolId id = key.toId();
        Pool.State storage pool = _getPool(id);
        pool.checkPoolInitialized();
        BeforeSwapDelta beforeSwapDelta;
        {
            int256 amountToSwap;
            uint24 lpFeeOverride;
            (amountToSwap, beforeSwapDelta, lpFeeOverride) = key.hooks.beforeSwap(key, params, hookData);
            // execute swap, account protocol fees, and emit swap event
            // _swap is needed to avoid stack too deep error
            swapDelta = _swap(
                pool,
                id,
                Pool.SwapParams({
                    tickSpacing: key.tickSpacing,
                    zeroForOne: params.zeroForOne,
                    amountSpecified: amountToSwap,
                    sqrtPriceLimitX96: params.sqrtPriceLimitX96,
                    lpFeeOverride: lpFeeOverride
                }),
                params.zeroForOne ? key.currency0 : key.currency1 // input token
            );
        }
        BalanceDelta hookDelta;
        (swapDelta, hookDelta) = key.hooks.afterSwap(key, params, swapDelta, hookData, beforeSwapDelta);
        // if the hook doesn't have the flag to be able to return deltas, hookDelta will always be 0
        if (hookDelta != BalanceDeltaLibrary.ZERO_DELTA) _accountPoolBalanceDelta(key, hookDelta, address(key.hooks));
        _accountPoolBalanceDelta(key, swapDelta, msg.sender);
    }
    /// @notice Internal swap function to execute a swap, take protocol fees on input token, and emit the swap event
    function _swap(Pool.State storage pool, PoolId id, Pool.SwapParams memory params, Currency inputCurrency)
        internal
        returns (BalanceDelta)
    {
        (BalanceDelta delta, uint256 amountToProtocol, uint24 swapFee, Pool.SwapResult memory result) =
            pool.swap(params);
        // the fee is on the input currency
        if (amountToProtocol > 0) _updateProtocolFees(inputCurrency, amountToProtocol);
        // event is emitted before the afterSwap call to ensure events are always emitted in order
        emit Swap(
            id,
            msg.sender,
            delta.amount0(),
            delta.amount1(),
            result.sqrtPriceX96,
            result.liquidity,
            result.tick,
            swapFee
        );
        return delta;
    }
    /// @inheritdoc IPoolManager
    function donate(PoolKey memory key, uint256 amount0, uint256 amount1, bytes calldata hookData)
        external
        onlyWhenUnlocked
        noDelegateCall
        returns (BalanceDelta delta)
    {
        PoolId poolId = key.toId();
        Pool.State storage pool = _getPool(poolId);
        pool.checkPoolInitialized();
        key.hooks.beforeDonate(key, amount0, amount1, hookData);
        delta = pool.donate(amount0, amount1);
        _accountPoolBalanceDelta(key, delta, msg.sender);
        // event is emitted before the afterDonate call to ensure events are always emitted in order
        emit Donate(poolId, msg.sender, amount0, amount1);
        key.hooks.afterDonate(key, amount0, amount1, hookData);
    }
    /// @inheritdoc IPoolManager
    function sync(Currency currency) external {
        // address(0) is used for the native currency
        if (currency.isAddressZero()) {
            // The reserves balance is not used for native settling, so we only need to reset the currency.
            CurrencyReserves.resetCurrency();
        } else {
            uint256 balance = currency.balanceOfSelf();
            CurrencyReserves.syncCurrencyAndReserves(currency, balance);
        }
    }
    /// @inheritdoc IPoolManager
    function take(Currency currency, address to, uint256 amount) external onlyWhenUnlocked {
        unchecked {
            // negation must be safe as amount is not negative
            _accountDelta(currency, -(amount.toInt128()), msg.sender);
            currency.transfer(to, amount);
        }
    }
    /// @inheritdoc IPoolManager
    function settle() external payable onlyWhenUnlocked returns (uint256) {
        return _settle(msg.sender);
    }
    /// @inheritdoc IPoolManager
    function settleFor(address recipient) external payable onlyWhenUnlocked returns (uint256) {
        return _settle(recipient);
    }
    /// @inheritdoc IPoolManager
    function clear(Currency currency, uint256 amount) external onlyWhenUnlocked {
        int256 current = currency.getDelta(msg.sender);
        // Because input is `uint256`, only positive amounts can be cleared.
        int128 amountDelta = amount.toInt128();
        if (amountDelta != current) MustClearExactPositiveDelta.selector.revertWith();
        // negation must be safe as amountDelta is positive
        unchecked {
            _accountDelta(currency, -(amountDelta), msg.sender);
        }
    }
    /// @inheritdoc IPoolManager
    function mint(address to, uint256 id, uint256 amount) external onlyWhenUnlocked {
        unchecked {
            Currency currency = CurrencyLibrary.fromId(id);
            // negation must be safe as amount is not negative
            _accountDelta(currency, -(amount.toInt128()), msg.sender);
            _mint(to, currency.toId(), amount);
        }
    }
    /// @inheritdoc IPoolManager
    function burn(address from, uint256 id, uint256 amount) external onlyWhenUnlocked {
        Currency currency = CurrencyLibrary.fromId(id);
        _accountDelta(currency, amount.toInt128(), msg.sender);
        _burnFrom(from, currency.toId(), amount);
    }
    /// @inheritdoc IPoolManager
    function updateDynamicLPFee(PoolKey memory key, uint24 newDynamicLPFee) external {
        if (!key.fee.isDynamicFee() || msg.sender != address(key.hooks)) {
            UnauthorizedDynamicLPFeeUpdate.selector.revertWith();
        }
        newDynamicLPFee.validate();
        PoolId id = key.toId();
        _pools[id].setLPFee(newDynamicLPFee);
    }
    // if settling native, integrators should still call `sync` first to avoid DoS attack vectors
    function _settle(address recipient) internal returns (uint256 paid) {
        Currency currency = CurrencyReserves.getSyncedCurrency();
        // if not previously synced, or the syncedCurrency slot has been reset, expects native currency to be settled
        if (currency.isAddressZero()) {
            paid = msg.value;
        } else {
            if (msg.value > 0) NonzeroNativeValue.selector.revertWith();
            // Reserves are guaranteed to be set because currency and reserves are always set together
            uint256 reservesBefore = CurrencyReserves.getSyncedReserves();
            uint256 reservesNow = currency.balanceOfSelf();
            paid = reservesNow - reservesBefore;
            CurrencyReserves.resetCurrency();
        }
        _accountDelta(currency, paid.toInt128(), recipient);
    }
    /// @notice Adds a balance delta in a currency for a target address
    function _accountDelta(Currency currency, int128 delta, address target) internal {
        if (delta == 0) return;
        (int256 previous, int256 next) = currency.applyDelta(target, delta);
        if (next == 0) {
            NonzeroDeltaCount.decrement();
        } else if (previous == 0) {
            NonzeroDeltaCount.increment();
        }
    }
    /// @notice Accounts the deltas of 2 currencies to a target address
    function _accountPoolBalanceDelta(PoolKey memory key, BalanceDelta delta, address target) internal {
        _accountDelta(key.currency0, delta.amount0(), target);
        _accountDelta(key.currency1, delta.amount1(), target);
    }
    /// @notice Implementation of the _getPool function defined in ProtocolFees
    function _getPool(PoolId id) internal view override returns (Pool.State storage) {
        return _pools[id];
    }
    /// @notice Implementation of the _isUnlocked function defined in ProtocolFees
    function _isUnlocked() internal view override returns (bool) {
        return Lock.isUnlocked();
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {PoolKey} from "../types/PoolKey.sol";
import {IHooks} from "../interfaces/IHooks.sol";
import {SafeCast} from "./SafeCast.sol";
import {LPFeeLibrary} from "./LPFeeLibrary.sol";
import {BalanceDelta, toBalanceDelta, BalanceDeltaLibrary} from "../types/BalanceDelta.sol";
import {BeforeSwapDelta, BeforeSwapDeltaLibrary} from "../types/BeforeSwapDelta.sol";
import {IPoolManager} from "../interfaces/IPoolManager.sol";
import {ParseBytes} from "./ParseBytes.sol";
import {CustomRevert} from "./CustomRevert.sol";
/// @notice V4 decides whether to invoke specific hooks by inspecting the least significant bits
/// of the address that the hooks contract is deployed to.
/// For example, a hooks contract deployed to address: 0x0000000000000000000000000000000000002400
/// has the lowest bits '10 0100 0000 0000' which would cause the 'before initialize' and 'after add liquidity' hooks to be used.
library Hooks {
    using LPFeeLibrary for uint24;
    using Hooks for IHooks;
    using SafeCast for int256;
    using BeforeSwapDeltaLibrary for BeforeSwapDelta;
    using ParseBytes for bytes;
    using CustomRevert for bytes4;
    uint160 internal constant ALL_HOOK_MASK = uint160((1 << 14) - 1);
    uint160 internal constant BEFORE_INITIALIZE_FLAG = 1 << 13;
    uint160 internal constant AFTER_INITIALIZE_FLAG = 1 << 12;
    uint160 internal constant BEFORE_ADD_LIQUIDITY_FLAG = 1 << 11;
    uint160 internal constant AFTER_ADD_LIQUIDITY_FLAG = 1 << 10;
    uint160 internal constant BEFORE_REMOVE_LIQUIDITY_FLAG = 1 << 9;
    uint160 internal constant AFTER_REMOVE_LIQUIDITY_FLAG = 1 << 8;
    uint160 internal constant BEFORE_SWAP_FLAG = 1 << 7;
    uint160 internal constant AFTER_SWAP_FLAG = 1 << 6;
    uint160 internal constant BEFORE_DONATE_FLAG = 1 << 5;
    uint160 internal constant AFTER_DONATE_FLAG = 1 << 4;
    uint160 internal constant BEFORE_SWAP_RETURNS_DELTA_FLAG = 1 << 3;
    uint160 internal constant AFTER_SWAP_RETURNS_DELTA_FLAG = 1 << 2;
    uint160 internal constant AFTER_ADD_LIQUIDITY_RETURNS_DELTA_FLAG = 1 << 1;
    uint160 internal constant AFTER_REMOVE_LIQUIDITY_RETURNS_DELTA_FLAG = 1 << 0;
    struct Permissions {
        bool beforeInitialize;
        bool afterInitialize;
        bool beforeAddLiquidity;
        bool afterAddLiquidity;
        bool beforeRemoveLiquidity;
        bool afterRemoveLiquidity;
        bool beforeSwap;
        bool afterSwap;
        bool beforeDonate;
        bool afterDonate;
        bool beforeSwapReturnDelta;
        bool afterSwapReturnDelta;
        bool afterAddLiquidityReturnDelta;
        bool afterRemoveLiquidityReturnDelta;
    }
    /// @notice Thrown if the address will not lead to the specified hook calls being called
    /// @param hooks The address of the hooks contract
    error HookAddressNotValid(address hooks);
    /// @notice Hook did not return its selector
    error InvalidHookResponse();
    /// @notice Additional context for ERC-7751 wrapped error when a hook call fails
    error HookCallFailed();
    /// @notice The hook's delta changed the swap from exactIn to exactOut or vice versa
    error HookDeltaExceedsSwapAmount();
    /// @notice Utility function intended to be used in hook constructors to ensure
    /// the deployed hooks address causes the intended hooks to be called
    /// @param permissions The hooks that are intended to be called
    /// @dev permissions param is memory as the function will be called from constructors
    function validateHookPermissions(IHooks self, Permissions memory permissions) internal pure {
        if (
            permissions.beforeInitialize != self.hasPermission(BEFORE_INITIALIZE_FLAG)
                || permissions.afterInitialize != self.hasPermission(AFTER_INITIALIZE_FLAG)
                || permissions.beforeAddLiquidity != self.hasPermission(BEFORE_ADD_LIQUIDITY_FLAG)
                || permissions.afterAddLiquidity != self.hasPermission(AFTER_ADD_LIQUIDITY_FLAG)
                || permissions.beforeRemoveLiquidity != self.hasPermission(BEFORE_REMOVE_LIQUIDITY_FLAG)
                || permissions.afterRemoveLiquidity != self.hasPermission(AFTER_REMOVE_LIQUIDITY_FLAG)
                || permissions.beforeSwap != self.hasPermission(BEFORE_SWAP_FLAG)
                || permissions.afterSwap != self.hasPermission(AFTER_SWAP_FLAG)
                || permissions.beforeDonate != self.hasPermission(BEFORE_DONATE_FLAG)
                || permissions.afterDonate != self.hasPermission(AFTER_DONATE_FLAG)
                || permissions.beforeSwapReturnDelta != self.hasPermission(BEFORE_SWAP_RETURNS_DELTA_FLAG)
                || permissions.afterSwapReturnDelta != self.hasPermission(AFTER_SWAP_RETURNS_DELTA_FLAG)
                || permissions.afterAddLiquidityReturnDelta != self.hasPermission(AFTER_ADD_LIQUIDITY_RETURNS_DELTA_FLAG)
                || permissions.afterRemoveLiquidityReturnDelta
                    != self.hasPermission(AFTER_REMOVE_LIQUIDITY_RETURNS_DELTA_FLAG)
        ) {
            HookAddressNotValid.selector.revertWith(address(self));
        }
    }
    /// @notice Ensures that the hook address includes at least one hook flag or dynamic fees, or is the 0 address
    /// @param self The hook to verify
    /// @param fee The fee of the pool the hook is used with
    /// @return bool True if the hook address is valid
    function isValidHookAddress(IHooks self, uint24 fee) internal pure returns (bool) {
        // The hook can only have a flag to return a hook delta on an action if it also has the corresponding action flag
        if (!self.hasPermission(BEFORE_SWAP_FLAG) && self.hasPermission(BEFORE_SWAP_RETURNS_DELTA_FLAG)) return false;
        if (!self.hasPermission(AFTER_SWAP_FLAG) && self.hasPermission(AFTER_SWAP_RETURNS_DELTA_FLAG)) return false;
        if (!self.hasPermission(AFTER_ADD_LIQUIDITY_FLAG) && self.hasPermission(AFTER_ADD_LIQUIDITY_RETURNS_DELTA_FLAG))
        {
            return false;
        }
        if (
            !self.hasPermission(AFTER_REMOVE_LIQUIDITY_FLAG)
                && self.hasPermission(AFTER_REMOVE_LIQUIDITY_RETURNS_DELTA_FLAG)
        ) return false;
        // If there is no hook contract set, then fee cannot be dynamic
        // If a hook contract is set, it must have at least 1 flag set, or have a dynamic fee
        return address(self) == address(0)
            ? !fee.isDynamicFee()
            : (uint160(address(self)) & ALL_HOOK_MASK > 0 || fee.isDynamicFee());
    }
    /// @notice performs a hook call using the given calldata on the given hook that doesn't return a delta
    /// @return result The complete data returned by the hook
    function callHook(IHooks self, bytes memory data) internal returns (bytes memory result) {
        bool success;
        assembly ("memory-safe") {
            success := call(gas(), self, 0, add(data, 0x20), mload(data), 0, 0)
        }
        // Revert with FailedHookCall, containing any error message to bubble up
        if (!success) CustomRevert.bubbleUpAndRevertWith(address(self), bytes4(data), HookCallFailed.selector);
        // The call was successful, fetch the returned data
        assembly ("memory-safe") {
            // allocate result byte array from the free memory pointer
            result := mload(0x40)
            // store new free memory pointer at the end of the array padded to 32 bytes
            mstore(0x40, add(result, and(add(returndatasize(), 0x3f), not(0x1f))))
            // store length in memory
            mstore(result, returndatasize())
            // copy return data to result
            returndatacopy(add(result, 0x20), 0, returndatasize())
        }
        // Length must be at least 32 to contain the selector. Check expected selector and returned selector match.
        if (result.length < 32 || result.parseSelector() != data.parseSelector()) {
            InvalidHookResponse.selector.revertWith();
        }
    }
    /// @notice performs a hook call using the given calldata on the given hook
    /// @return int256 The delta returned by the hook
    function callHookWithReturnDelta(IHooks self, bytes memory data, bool parseReturn) internal returns (int256) {
        bytes memory result = callHook(self, data);
        // If this hook wasn't meant to return something, default to 0 delta
        if (!parseReturn) return 0;
        // A length of 64 bytes is required to return a bytes4, and a 32 byte delta
        if (result.length != 64) InvalidHookResponse.selector.revertWith();
        return result.parseReturnDelta();
    }
    /// @notice modifier to prevent calling a hook if they initiated the action
    modifier noSelfCall(IHooks self) {
        if (msg.sender != address(self)) {
            _;
        }
    }
    /// @notice calls beforeInitialize hook if permissioned and validates return value
    function beforeInitialize(IHooks self, PoolKey memory key, uint160 sqrtPriceX96) internal noSelfCall(self) {
        if (self.hasPermission(BEFORE_INITIALIZE_FLAG)) {
            self.callHook(abi.encodeCall(IHooks.beforeInitialize, (msg.sender, key, sqrtPriceX96)));
        }
    }
    /// @notice calls afterInitialize hook if permissioned and validates return value
    function afterInitialize(IHooks self, PoolKey memory key, uint160 sqrtPriceX96, int24 tick)
        internal
        noSelfCall(self)
    {
        if (self.hasPermission(AFTER_INITIALIZE_FLAG)) {
            self.callHook(abi.encodeCall(IHooks.afterInitialize, (msg.sender, key, sqrtPriceX96, tick)));
        }
    }
    /// @notice calls beforeModifyLiquidity hook if permissioned and validates return value
    function beforeModifyLiquidity(
        IHooks self,
        PoolKey memory key,
        IPoolManager.ModifyLiquidityParams memory params,
        bytes calldata hookData
    ) internal noSelfCall(self) {
        if (params.liquidityDelta > 0 && self.hasPermission(BEFORE_ADD_LIQUIDITY_FLAG)) {
            self.callHook(abi.encodeCall(IHooks.beforeAddLiquidity, (msg.sender, key, params, hookData)));
        } else if (params.liquidityDelta <= 0 && self.hasPermission(BEFORE_REMOVE_LIQUIDITY_FLAG)) {
            self.callHook(abi.encodeCall(IHooks.beforeRemoveLiquidity, (msg.sender, key, params, hookData)));
        }
    }
    /// @notice calls afterModifyLiquidity hook if permissioned and validates return value
    function afterModifyLiquidity(
        IHooks self,
        PoolKey memory key,
        IPoolManager.ModifyLiquidityParams memory params,
        BalanceDelta delta,
        BalanceDelta feesAccrued,
        bytes calldata hookData
    ) internal returns (BalanceDelta callerDelta, BalanceDelta hookDelta) {
        if (msg.sender == address(self)) return (delta, BalanceDeltaLibrary.ZERO_DELTA);
        callerDelta = delta;
        if (params.liquidityDelta > 0) {
            if (self.hasPermission(AFTER_ADD_LIQUIDITY_FLAG)) {
                hookDelta = BalanceDelta.wrap(
                    self.callHookWithReturnDelta(
                        abi.encodeCall(
                            IHooks.afterAddLiquidity, (msg.sender, key, params, delta, feesAccrued, hookData)
                        ),
                        self.hasPermission(AFTER_ADD_LIQUIDITY_RETURNS_DELTA_FLAG)
                    )
                );
                callerDelta = callerDelta - hookDelta;
            }
        } else {
            if (self.hasPermission(AFTER_REMOVE_LIQUIDITY_FLAG)) {
                hookDelta = BalanceDelta.wrap(
                    self.callHookWithReturnDelta(
                        abi.encodeCall(
                            IHooks.afterRemoveLiquidity, (msg.sender, key, params, delta, feesAccrued, hookData)
                        ),
                        self.hasPermission(AFTER_REMOVE_LIQUIDITY_RETURNS_DELTA_FLAG)
                    )
                );
                callerDelta = callerDelta - hookDelta;
            }
        }
    }
    /// @notice calls beforeSwap hook if permissioned and validates return value
    function beforeSwap(IHooks self, PoolKey memory key, IPoolManager.SwapParams memory params, bytes calldata hookData)
        internal
        returns (int256 amountToSwap, BeforeSwapDelta hookReturn, uint24 lpFeeOverride)
    {
        amountToSwap = params.amountSpecified;
        if (msg.sender == address(self)) return (amountToSwap, BeforeSwapDeltaLibrary.ZERO_DELTA, lpFeeOverride);
        if (self.hasPermission(BEFORE_SWAP_FLAG)) {
            bytes memory result = callHook(self, abi.encodeCall(IHooks.beforeSwap, (msg.sender, key, params, hookData)));
            // A length of 96 bytes is required to return a bytes4, a 32 byte delta, and an LP fee
            if (result.length != 96) InvalidHookResponse.selector.revertWith();
            // dynamic fee pools that want to override the cache fee, return a valid fee with the override flag. If override flag
            // is set but an invalid fee is returned, the transaction will revert. Otherwise the current LP fee will be used
            if (key.fee.isDynamicFee()) lpFeeOverride = result.parseFee();
            // skip this logic for the case where the hook return is 0
            if (self.hasPermission(BEFORE_SWAP_RETURNS_DELTA_FLAG)) {
                hookReturn = BeforeSwapDelta.wrap(result.parseReturnDelta());
                // any return in unspecified is passed to the afterSwap hook for handling
                int128 hookDeltaSpecified = hookReturn.getSpecifiedDelta();
                // Update the swap amount according to the hook's return, and check that the swap type doesn't change (exact input/output)
                if (hookDeltaSpecified != 0) {
                    bool exactInput = amountToSwap < 0;
                    amountToSwap += hookDeltaSpecified;
                    if (exactInput ? amountToSwap > 0 : amountToSwap < 0) {
                        HookDeltaExceedsSwapAmount.selector.revertWith();
                    }
                }
            }
        }
    }
    /// @notice calls afterSwap hook if permissioned and validates return value
    function afterSwap(
        IHooks self,
        PoolKey memory key,
        IPoolManager.SwapParams memory params,
        BalanceDelta swapDelta,
        bytes calldata hookData,
        BeforeSwapDelta beforeSwapHookReturn
    ) internal returns (BalanceDelta, BalanceDelta) {
        if (msg.sender == address(self)) return (swapDelta, BalanceDeltaLibrary.ZERO_DELTA);
        int128 hookDeltaSpecified = beforeSwapHookReturn.getSpecifiedDelta();
        int128 hookDeltaUnspecified = beforeSwapHookReturn.getUnspecifiedDelta();
        if (self.hasPermission(AFTER_SWAP_FLAG)) {
            hookDeltaUnspecified += self.callHookWithReturnDelta(
                abi.encodeCall(IHooks.afterSwap, (msg.sender, key, params, swapDelta, hookData)),
                self.hasPermission(AFTER_SWAP_RETURNS_DELTA_FLAG)
            ).toInt128();
        }
        BalanceDelta hookDelta;
        if (hookDeltaUnspecified != 0 || hookDeltaSpecified != 0) {
            hookDelta = (params.amountSpecified < 0 == params.zeroForOne)
                ? toBalanceDelta(hookDeltaSpecified, hookDeltaUnspecified)
                : toBalanceDelta(hookDeltaUnspecified, hookDeltaSpecified);
            // the caller has to pay for (or receive) the hook's delta
            swapDelta = swapDelta - hookDelta;
        }
        return (swapDelta, hookDelta);
    }
    /// @notice calls beforeDonate hook if permissioned and validates return value
    function beforeDonate(IHooks self, PoolKey memory key, uint256 amount0, uint256 amount1, bytes calldata hookData)
        internal
        noSelfCall(self)
    {
        if (self.hasPermission(BEFORE_DONATE_FLAG)) {
            self.callHook(abi.encodeCall(IHooks.beforeDonate, (msg.sender, key, amount0, amount1, hookData)));
        }
    }
    /// @notice calls afterDonate hook if permissioned and validates return value
    function afterDonate(IHooks self, PoolKey memory key, uint256 amount0, uint256 amount1, bytes calldata hookData)
        internal
        noSelfCall(self)
    {
        if (self.hasPermission(AFTER_DONATE_FLAG)) {
            self.callHook(abi.encodeCall(IHooks.afterDonate, (msg.sender, key, amount0, amount1, hookData)));
        }
    }
    function hasPermission(IHooks self, uint160 flag) internal pure returns (bool) {
        return uint160(address(self)) & flag != 0;
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
import {SafeCast} from "./SafeCast.sol";
import {TickBitmap} from "./TickBitmap.sol";
import {Position} from "./Position.sol";
import {UnsafeMath} from "./UnsafeMath.sol";
import {FixedPoint128} from "./FixedPoint128.sol";
import {TickMath} from "./TickMath.sol";
import {SqrtPriceMath} from "./SqrtPriceMath.sol";
import {SwapMath} from "./SwapMath.sol";
import {BalanceDelta, toBalanceDelta, BalanceDeltaLibrary} from "../types/BalanceDelta.sol";
import {Slot0} from "../types/Slot0.sol";
import {ProtocolFeeLibrary} from "./ProtocolFeeLibrary.sol";
import {LiquidityMath} from "./LiquidityMath.sol";
import {LPFeeLibrary} from "./LPFeeLibrary.sol";
import {CustomRevert} from "./CustomRevert.sol";
/// @notice a library with all actions that can be performed on a pool
library Pool {
    using SafeCast for *;
    using TickBitmap for mapping(int16 => uint256);
    using Position for mapping(bytes32 => Position.State);
    using Position for Position.State;
    using Pool for State;
    using ProtocolFeeLibrary for *;
    using LPFeeLibrary for uint24;
    using CustomRevert for bytes4;
    /// @notice Thrown when tickLower is not below tickUpper
    /// @param tickLower The invalid tickLower
    /// @param tickUpper The invalid tickUpper
    error TicksMisordered(int24 tickLower, int24 tickUpper);
    /// @notice Thrown when tickLower is less than min tick
    /// @param tickLower The invalid tickLower
    error TickLowerOutOfBounds(int24 tickLower);
    /// @notice Thrown when tickUpper exceeds max tick
    /// @param tickUpper The invalid tickUpper
    error TickUpperOutOfBounds(int24 tickUpper);
    /// @notice For the tick spacing, the tick has too much liquidity
    error TickLiquidityOverflow(int24 tick);
    /// @notice Thrown when trying to initialize an already initialized pool
    error PoolAlreadyInitialized();
    /// @notice Thrown when trying to interact with a non-initialized pool
    error PoolNotInitialized();
    /// @notice Thrown when sqrtPriceLimitX96 on a swap has already exceeded its limit
    /// @param sqrtPriceCurrentX96 The invalid, already surpassed sqrtPriceLimitX96
    /// @param sqrtPriceLimitX96 The surpassed price limit
    error PriceLimitAlreadyExceeded(uint160 sqrtPriceCurrentX96, uint160 sqrtPriceLimitX96);
    /// @notice Thrown when sqrtPriceLimitX96 lies outside of valid tick/price range
    /// @param sqrtPriceLimitX96 The invalid, out-of-bounds sqrtPriceLimitX96
    error PriceLimitOutOfBounds(uint160 sqrtPriceLimitX96);
    /// @notice Thrown by donate if there is currently 0 liquidity, since the fees will not go to any liquidity providers
    error NoLiquidityToReceiveFees();
    /// @notice Thrown when trying to swap with max lp fee and specifying an output amount
    error InvalidFeeForExactOut();
    // info stored for each initialized individual tick
    struct TickInfo {
        // the total position liquidity that references this tick
        uint128 liquidityGross;
        // amount of net liquidity added (subtracted) when tick is crossed from left to right (right to left),
        int128 liquidityNet;
        // fee growth per unit of liquidity on the _other_ side of this tick (relative to the current tick)
        // only has relative meaning, not absolute — the value depends on when the tick is initialized
        uint256 feeGrowthOutside0X128;
        uint256 feeGrowthOutside1X128;
    }
    /// @notice The state of a pool
    /// @dev Note that feeGrowthGlobal can be artificially inflated
    /// For pools with a single liquidity position, actors can donate to themselves to freely inflate feeGrowthGlobal
    /// atomically donating and collecting fees in the same unlockCallback may make the inflated value more extreme
    struct State {
        Slot0 slot0;
        uint256 feeGrowthGlobal0X128;
        uint256 feeGrowthGlobal1X128;
        uint128 liquidity;
        mapping(int24 tick => TickInfo) ticks;
        mapping(int16 wordPos => uint256) tickBitmap;
        mapping(bytes32 positionKey => Position.State) positions;
    }
    /// @dev Common checks for valid tick inputs.
    function checkTicks(int24 tickLower, int24 tickUpper) private pure {
        if (tickLower >= tickUpper) TicksMisordered.selector.revertWith(tickLower, tickUpper);
        if (tickLower < TickMath.MIN_TICK) TickLowerOutOfBounds.selector.revertWith(tickLower);
        if (tickUpper > TickMath.MAX_TICK) TickUpperOutOfBounds.selector.revertWith(tickUpper);
    }
    function initialize(State storage self, uint160 sqrtPriceX96, uint24 lpFee) internal returns (int24 tick) {
        if (self.slot0.sqrtPriceX96() != 0) PoolAlreadyInitialized.selector.revertWith();
        tick = TickMath.getTickAtSqrtPrice(sqrtPriceX96);
        // the initial protocolFee is 0 so doesn't need to be set
        self.slot0 = Slot0.wrap(bytes32(0)).setSqrtPriceX96(sqrtPriceX96).setTick(tick).setLpFee(lpFee);
    }
    function setProtocolFee(State storage self, uint24 protocolFee) internal {
        self.checkPoolInitialized();
        self.slot0 = self.slot0.setProtocolFee(protocolFee);
    }
    /// @notice Only dynamic fee pools may update the lp fee.
    function setLPFee(State storage self, uint24 lpFee) internal {
        self.checkPoolInitialized();
        self.slot0 = self.slot0.setLpFee(lpFee);
    }
    struct ModifyLiquidityParams {
        // the address that owns the position
        address owner;
        // the lower and upper tick of the position
        int24 tickLower;
        int24 tickUpper;
        // any change in liquidity
        int128 liquidityDelta;
        // the spacing between ticks
        int24 tickSpacing;
        // used to distinguish positions of the same owner, at the same tick range
        bytes32 salt;
    }
    struct ModifyLiquidityState {
        bool flippedLower;
        uint128 liquidityGrossAfterLower;
        bool flippedUpper;
        uint128 liquidityGrossAfterUpper;
    }
    /// @notice Effect changes to a position in a pool
    /// @dev PoolManager checks that the pool is initialized before calling
    /// @param params the position details and the change to the position's liquidity to effect
    /// @return delta the deltas of the token balances of the pool, from the liquidity change
    /// @return feeDelta the fees generated by the liquidity range
    function modifyLiquidity(State storage self, ModifyLiquidityParams memory params)
        internal
        returns (BalanceDelta delta, BalanceDelta feeDelta)
    {
        int128 liquidityDelta = params.liquidityDelta;
        int24 tickLower = params.tickLower;
        int24 tickUpper = params.tickUpper;
        checkTicks(tickLower, tickUpper);
        {
            ModifyLiquidityState memory state;
            // if we need to update the ticks, do it
            if (liquidityDelta != 0) {
                (state.flippedLower, state.liquidityGrossAfterLower) =
                    updateTick(self, tickLower, liquidityDelta, false);
                (state.flippedUpper, state.liquidityGrossAfterUpper) = updateTick(self, tickUpper, liquidityDelta, true);
                // `>` and `>=` are logically equivalent here but `>=` is cheaper
                if (liquidityDelta >= 0) {
                    uint128 maxLiquidityPerTick = tickSpacingToMaxLiquidityPerTick(params.tickSpacing);
                    if (state.liquidityGrossAfterLower > maxLiquidityPerTick) {
                        TickLiquidityOverflow.selector.revertWith(tickLower);
                    }
                    if (state.liquidityGrossAfterUpper > maxLiquidityPerTick) {
                        TickLiquidityOverflow.selector.revertWith(tickUpper);
                    }
                }
                if (state.flippedLower) {
                    self.tickBitmap.flipTick(tickLower, params.tickSpacing);
                }
                if (state.flippedUpper) {
                    self.tickBitmap.flipTick(tickUpper, params.tickSpacing);
                }
            }
            {
                (uint256 feeGrowthInside0X128, uint256 feeGrowthInside1X128) =
                    getFeeGrowthInside(self, tickLower, tickUpper);
                Position.State storage position = self.positions.get(params.owner, tickLower, tickUpper, params.salt);
                (uint256 feesOwed0, uint256 feesOwed1) =
                    position.update(liquidityDelta, feeGrowthInside0X128, feeGrowthInside1X128);
                // Fees earned from LPing are calculated, and returned
                feeDelta = toBalanceDelta(feesOwed0.toInt128(), feesOwed1.toInt128());
            }
            // clear any tick data that is no longer needed
            if (liquidityDelta < 0) {
                if (state.flippedLower) {
                    clearTick(self, tickLower);
                }
                if (state.flippedUpper) {
                    clearTick(self, tickUpper);
                }
            }
        }
        if (liquidityDelta != 0) {
            Slot0 _slot0 = self.slot0;
            (int24 tick, uint160 sqrtPriceX96) = (_slot0.tick(), _slot0.sqrtPriceX96());
            if (tick < tickLower) {
                // current tick is below the passed range; liquidity can only become in range by crossing from left to
                // right, when we'll need _more_ currency0 (it's becoming more valuable) so user must provide it
                delta = toBalanceDelta(
                    SqrtPriceMath.getAmount0Delta(
                        TickMath.getSqrtPriceAtTick(tickLower), TickMath.getSqrtPriceAtTick(tickUpper), liquidityDelta
                    ).toInt128(),
                    0
                );
            } else if (tick < tickUpper) {
                delta = toBalanceDelta(
                    SqrtPriceMath.getAmount0Delta(sqrtPriceX96, TickMath.getSqrtPriceAtTick(tickUpper), liquidityDelta)
                        .toInt128(),
                    SqrtPriceMath.getAmount1Delta(TickMath.getSqrtPriceAtTick(tickLower), sqrtPriceX96, liquidityDelta)
                        .toInt128()
                );
                self.liquidity = LiquidityMath.addDelta(self.liquidity, liquidityDelta);
            } else {
                // current tick is above the passed range; liquidity can only become in range by crossing from right to
                // left, when we'll need _more_ currency1 (it's becoming more valuable) so user must provide it
                delta = toBalanceDelta(
                    0,
                    SqrtPriceMath.getAmount1Delta(
                        TickMath.getSqrtPriceAtTick(tickLower), TickMath.getSqrtPriceAtTick(tickUpper), liquidityDelta
                    ).toInt128()
                );
            }
        }
    }
    // Tracks the state of a pool throughout a swap, and returns these values at the end of the swap
    struct SwapResult {
        // the current sqrt(price)
        uint160 sqrtPriceX96;
        // the tick associated with the current price
        int24 tick;
        // the current liquidity in range
        uint128 liquidity;
    }
    struct StepComputations {
        // the price at the beginning of the step
        uint160 sqrtPriceStartX96;
        // the next tick to swap to from the current tick in the swap direction
        int24 tickNext;
        // whether tickNext is initialized or not
        bool initialized;
        // sqrt(price) for the next tick (1/0)
        uint160 sqrtPriceNextX96;
        // how much is being swapped in in this step
        uint256 amountIn;
        // how much is being swapped out
        uint256 amountOut;
        // how much fee is being paid in
        uint256 feeAmount;
        // the global fee growth of the input token. updated in storage at the end of swap
        uint256 feeGrowthGlobalX128;
    }
    struct SwapParams {
        int256 amountSpecified;
        int24 tickSpacing;
        bool zeroForOne;
        uint160 sqrtPriceLimitX96;
        uint24 lpFeeOverride;
    }
    /// @notice Executes a swap against the state, and returns the amount deltas of the pool
    /// @dev PoolManager checks that the pool is initialized before calling
    function swap(State storage self, SwapParams memory params)
        internal
        returns (BalanceDelta swapDelta, uint256 amountToProtocol, uint24 swapFee, SwapResult memory result)
    {
        Slot0 slot0Start = self.slot0;
        bool zeroForOne = params.zeroForOne;
        uint256 protocolFee =
            zeroForOne ? slot0Start.protocolFee().getZeroForOneFee() : slot0Start.protocolFee().getOneForZeroFee();
        // the amount remaining to be swapped in/out of the input/output asset. initially set to the amountSpecified
        int256 amountSpecifiedRemaining = params.amountSpecified;
        // the amount swapped out/in of the output/input asset. initially set to 0
        int256 amountCalculated = 0;
        // initialize to the current sqrt(price)
        result.sqrtPriceX96 = slot0Start.sqrtPriceX96();
        // initialize to the current tick
        result.tick = slot0Start.tick();
        // initialize to the current liquidity
        result.liquidity = self.liquidity;
        // if the beforeSwap hook returned a valid fee override, use that as the LP fee, otherwise load from storage
        // lpFee, swapFee, and protocolFee are all in pips
        {
            uint24 lpFee = params.lpFeeOverride.isOverride()
                ? params.lpFeeOverride.removeOverrideFlagAndValidate()
                : slot0Start.lpFee();
            swapFee = protocolFee == 0 ? lpFee : uint16(protocolFee).calculateSwapFee(lpFee);
        }
        // a swap fee totaling MAX_SWAP_FEE (100%) makes exact output swaps impossible since the input is entirely consumed by the fee
        if (swapFee >= SwapMath.MAX_SWAP_FEE) {
            // if exactOutput
            if (params.amountSpecified > 0) {
                InvalidFeeForExactOut.selector.revertWith();
            }
        }
        // swapFee is the pool's fee in pips (LP fee + protocol fee)
        // when the amount swapped is 0, there is no protocolFee applied and the fee amount paid to the protocol is set to 0
        if (params.amountSpecified == 0) return (BalanceDeltaLibrary.ZERO_DELTA, 0, swapFee, result);
        if (zeroForOne) {
            if (params.sqrtPriceLimitX96 >= slot0Start.sqrtPriceX96()) {
                PriceLimitAlreadyExceeded.selector.revertWith(slot0Start.sqrtPriceX96(), params.sqrtPriceLimitX96);
            }
            // Swaps can never occur at MIN_TICK, only at MIN_TICK + 1, except at initialization of a pool
            // Under certain circumstances outlined below, the tick will preemptively reach MIN_TICK without swapping there
            if (params.sqrtPriceLimitX96 <= TickMath.MIN_SQRT_PRICE) {
                PriceLimitOutOfBounds.selector.revertWith(params.sqrtPriceLimitX96);
            }
        } else {
            if (params.sqrtPriceLimitX96 <= slot0Start.sqrtPriceX96()) {
                PriceLimitAlreadyExceeded.selector.revertWith(slot0Start.sqrtPriceX96(), params.sqrtPriceLimitX96);
            }
            if (params.sqrtPriceLimitX96 >= TickMath.MAX_SQRT_PRICE) {
                PriceLimitOutOfBounds.selector.revertWith(params.sqrtPriceLimitX96);
            }
        }
        StepComputations memory step;
        step.feeGrowthGlobalX128 = zeroForOne ? self.feeGrowthGlobal0X128 : self.feeGrowthGlobal1X128;
        // continue swapping as long as we haven't used the entire input/output and haven't reached the price limit
        while (!(amountSpecifiedRemaining == 0 || result.sqrtPriceX96 == params.sqrtPriceLimitX96)) {
            step.sqrtPriceStartX96 = result.sqrtPriceX96;
            (step.tickNext, step.initialized) =
                self.tickBitmap.nextInitializedTickWithinOneWord(result.tick, params.tickSpacing, zeroForOne);
            // ensure that we do not overshoot the min/max tick, as the tick bitmap is not aware of these bounds
            if (step.tickNext <= TickMath.MIN_TICK) {
                step.tickNext = TickMath.MIN_TICK;
            }
            if (step.tickNext >= TickMath.MAX_TICK) {
                step.tickNext = TickMath.MAX_TICK;
            }
            // get the price for the next tick
            step.sqrtPriceNextX96 = TickMath.getSqrtPriceAtTick(step.tickNext);
            // compute values to swap to the target tick, price limit, or point where input/output amount is exhausted
            (result.sqrtPriceX96, step.amountIn, step.amountOut, step.feeAmount) = SwapMath.computeSwapStep(
                result.sqrtPriceX96,
                SwapMath.getSqrtPriceTarget(zeroForOne, step.sqrtPriceNextX96, params.sqrtPriceLimitX96),
                result.liquidity,
                amountSpecifiedRemaining,
                swapFee
            );
            // if exactOutput
            if (params.amountSpecified > 0) {
                unchecked {
                    amountSpecifiedRemaining -= step.amountOut.toInt256();
                }
                amountCalculated -= (step.amountIn + step.feeAmount).toInt256();
            } else {
                // safe because we test that amountSpecified > amountIn + feeAmount in SwapMath
                unchecked {
                    amountSpecifiedRemaining += (step.amountIn + step.feeAmount).toInt256();
                }
                amountCalculated += step.amountOut.toInt256();
            }
            // if the protocol fee is on, calculate how much is owed, decrement feeAmount, and increment protocolFee
            if (protocolFee > 0) {
                unchecked {
                    // step.amountIn does not include the swap fee, as it's already been taken from it,
                    // so add it back to get the total amountIn and use that to calculate the amount of fees owed to the protocol
                    // cannot overflow due to limits on the size of protocolFee and params.amountSpecified
                    // this rounds down to favor LPs over the protocol
                    uint256 delta = (swapFee == protocolFee)
                        ? step.feeAmount // lp fee is 0, so the entire fee is owed to the protocol instead
                        : (step.amountIn + step.feeAmount) * protocolFee / ProtocolFeeLibrary.PIPS_DENOMINATOR;
                    // subtract it from the total fee and add it to the protocol fee
                    step.feeAmount -= delta;
                    amountToProtocol += delta;
                }
            }
            // update global fee tracker
            if (result.liquidity > 0) {
                unchecked {
                    // FullMath.mulDiv isn't needed as the numerator can't overflow uint256 since tokens have a max supply of type(uint128).max
                    step.feeGrowthGlobalX128 +=
                        UnsafeMath.simpleMulDiv(step.feeAmount, FixedPoint128.Q128, result.liquidity);
                }
            }
            // Shift tick if we reached the next price, and preemptively decrement for zeroForOne swaps to tickNext - 1.
            // If the swap doesn't continue (if amountRemaining == 0 or sqrtPriceLimit is met), slot0.tick will be 1 less
            // than getTickAtSqrtPrice(slot0.sqrtPrice). This doesn't affect swaps, but donation calls should verify both
            // price and tick to reward the correct LPs.
            if (result.sqrtPriceX96 == step.sqrtPriceNextX96) {
                // if the tick is initialized, run the tick transition
                if (step.initialized) {
                    (uint256 feeGrowthGlobal0X128, uint256 feeGrowthGlobal1X128) = zeroForOne
                        ? (step.feeGrowthGlobalX128, self.feeGrowthGlobal1X128)
                        : (self.feeGrowthGlobal0X128, step.feeGrowthGlobalX128);
                    int128 liquidityNet =
                        Pool.crossTick(self, step.tickNext, feeGrowthGlobal0X128, feeGrowthGlobal1X128);
                    // if we're moving leftward, we interpret liquidityNet as the opposite sign
                    // safe because liquidityNet cannot be type(int128).min
                    unchecked {
                        if (zeroForOne) liquidityNet = -liquidityNet;
                    }
                    result.liquidity = LiquidityMath.addDelta(result.liquidity, liquidityNet);
                }
                unchecked {
                    result.tick = zeroForOne ? step.tickNext - 1 : step.tickNext;
                }
            } else if (result.sqrtPriceX96 != step.sqrtPriceStartX96) {
                // recompute unless we're on a lower tick boundary (i.e. already transitioned ticks), and haven't moved
                result.tick = TickMath.getTickAtSqrtPrice(result.sqrtPriceX96);
            }
        }
        self.slot0 = slot0Start.setTick(result.tick).setSqrtPriceX96(result.sqrtPriceX96);
        // update liquidity if it changed
        if (self.liquidity != result.liquidity) self.liquidity = result.liquidity;
        // update fee growth global
        if (!zeroForOne) {
            self.feeGrowthGlobal1X128 = step.feeGrowthGlobalX128;
        } else {
            self.feeGrowthGlobal0X128 = step.feeGrowthGlobalX128;
        }
        unchecked {
            // "if currency1 is specified"
            if (zeroForOne != (params.amountSpecified < 0)) {
                swapDelta = toBalanceDelta(
                    amountCalculated.toInt128(), (params.amountSpecified - amountSpecifiedRemaining).toInt128()
                );
            } else {
                swapDelta = toBalanceDelta(
                    (params.amountSpecified - amountSpecifiedRemaining).toInt128(), amountCalculated.toInt128()
                );
            }
        }
    }
    /// @notice Donates the given amount of currency0 and currency1 to the pool
    function donate(State storage state, uint256 amount0, uint256 amount1) internal returns (BalanceDelta delta) {
        uint128 liquidity = state.liquidity;
        if (liquidity == 0) NoLiquidityToReceiveFees.selector.revertWith();
        unchecked {
            // negation safe as amount0 and amount1 are always positive
            delta = toBalanceDelta(-(amount0.toInt128()), -(amount1.toInt128()));
            // FullMath.mulDiv is unnecessary because the numerator is bounded by type(int128).max * Q128, which is less than type(uint256).max
            if (amount0 > 0) {
                state.feeGrowthGlobal0X128 += UnsafeMath.simpleMulDiv(amount0, FixedPoint128.Q128, liquidity);
            }
            if (amount1 > 0) {
                state.feeGrowthGlobal1X128 += UnsafeMath.simpleMulDiv(amount1, FixedPoint128.Q128, liquidity);
            }
        }
    }
    /// @notice Retrieves fee growth data
    /// @param self The Pool state struct
    /// @param tickLower The lower tick boundary of the position
    /// @param tickUpper The upper tick boundary of the position
    /// @return feeGrowthInside0X128 The all-time fee growth in token0, per unit of liquidity, inside the position's tick boundaries
    /// @return feeGrowthInside1X128 The all-time fee growth in token1, per unit of liquidity, inside the position's tick boundaries
    function getFeeGrowthInside(State storage self, int24 tickLower, int24 tickUpper)
        internal
        view
        returns (uint256 feeGrowthInside0X128, uint256 feeGrowthInside1X128)
    {
        TickInfo storage lower = self.ticks[tickLower];
        TickInfo storage upper = self.ticks[tickUpper];
        int24 tickCurrent = self.slot0.tick();
        unchecked {
            if (tickCurrent < tickLower) {
                feeGrowthInside0X128 = lower.feeGrowthOutside0X128 - upper.feeGrowthOutside0X128;
                feeGrowthInside1X128 = lower.feeGrowthOutside1X128 - upper.feeGrowthOutside1X128;
            } else if (tickCurrent >= tickUpper) {
                feeGrowthInside0X128 = upper.feeGrowthOutside0X128 - lower.feeGrowthOutside0X128;
                feeGrowthInside1X128 = upper.feeGrowthOutside1X128 - lower.feeGrowthOutside1X128;
            } else {
                feeGrowthInside0X128 =
                    self.feeGrowthGlobal0X128 - lower.feeGrowthOutside0X128 - upper.feeGrowthOutside0X128;
                feeGrowthInside1X128 =
                    self.feeGrowthGlobal1X128 - lower.feeGrowthOutside1X128 - upper.feeGrowthOutside1X128;
            }
        }
    }
    /// @notice Updates a tick and returns true if the tick was flipped from initialized to uninitialized, or vice versa
    /// @param self The mapping containing all tick information for initialized ticks
    /// @param tick The tick that will be updated
    /// @param liquidityDelta A new amount of liquidity to be added (subtracted) when tick is crossed from left to right (right to left)
    /// @param upper true for updating a position's upper tick, or false for updating a position's lower tick
    /// @return flipped Whether the tick was flipped from initialized to uninitialized, or vice versa
    /// @return liquidityGrossAfter The total amount of liquidity for all positions that references the tick after the update
    function updateTick(State storage self, int24 tick, int128 liquidityDelta, bool upper)
        internal
        returns (bool flipped, uint128 liquidityGrossAfter)
    {
        TickInfo storage info = self.ticks[tick];
        uint128 liquidityGrossBefore = info.liquidityGross;
        int128 liquidityNetBefore = info.liquidityNet;
        liquidityGrossAfter = LiquidityMath.addDelta(liquidityGrossBefore, liquidityDelta);
        flipped = (liquidityGrossAfter == 0) != (liquidityGrossBefore == 0);
        if (liquidityGrossBefore == 0) {
            // by convention, we assume that all growth before a tick was initialized happened _below_ the tick
            if (tick <= self.slot0.tick()) {
                info.feeGrowthOutside0X128 = self.feeGrowthGlobal0X128;
                info.feeGrowthOutside1X128 = self.feeGrowthGlobal1X128;
            }
        }
        // when the lower (upper) tick is crossed left to right, liquidity must be added (removed)
        // when the lower (upper) tick is crossed right to left, liquidity must be removed (added)
        int128 liquidityNet = upper ? liquidityNetBefore - liquidityDelta : liquidityNetBefore + liquidityDelta;
        assembly ("memory-safe") {
            // liquidityGrossAfter and liquidityNet are packed in the first slot of `info`
            // So we can store them with a single sstore by packing them ourselves first
            sstore(
                info.slot,
                // bitwise OR to pack liquidityGrossAfter and liquidityNet
                or(
                    // Put liquidityGrossAfter in the lower bits, clearing out the upper bits
                    and(liquidityGrossAfter, 0xffffffffffffffffffffffffffffffff),
                    // Shift liquidityNet to put it in the upper bits (no need for signextend since we're shifting left)
                    shl(128, liquidityNet)
                )
            )
        }
    }
    /// @notice Derives max liquidity per tick from given tick spacing
    /// @dev Executed when adding liquidity
    /// @param tickSpacing The amount of required tick separation, realized in multiples of `tickSpacing`
    ///     e.g., a tickSpacing of 3 requires ticks to be initialized every 3rd tick i.e., ..., -6, -3, 0, 3, 6, ...
    /// @return result The max liquidity per tick
    function tickSpacingToMaxLiquidityPerTick(int24 tickSpacing) internal pure returns (uint128 result) {
        // Equivalent to:
        // int24 minTick = (TickMath.MIN_TICK / tickSpacing);
        // if (TickMath.MIN_TICK  % tickSpacing != 0) minTick--;
        // int24 maxTick = (TickMath.MAX_TICK / tickSpacing);
        // uint24 numTicks = maxTick - minTick + 1;
        // return type(uint128).max / numTicks;
        int24 MAX_TICK = TickMath.MAX_TICK;
        int24 MIN_TICK = TickMath.MIN_TICK;
        // tick spacing will never be 0 since TickMath.MIN_TICK_SPACING is 1
        assembly ("memory-safe") {
            tickSpacing := signextend(2, tickSpacing)
            let minTick := sub(sdiv(MIN_TICK, tickSpacing), slt(smod(MIN_TICK, tickSpacing), 0))
            let maxTick := sdiv(MAX_TICK, tickSpacing)
            let numTicks := add(sub(maxTick, minTick), 1)
            result := div(sub(shl(128, 1), 1), numTicks)
        }
    }
    /// @notice Reverts if the given pool has not been initialized
    function checkPoolInitialized(State storage self) internal view {
        if (self.slot0.sqrtPriceX96() == 0) PoolNotInitialized.selector.revertWith();
    }
    /// @notice Clears tick data
    /// @param self The mapping containing all initialized tick information for initialized ticks
    /// @param tick The tick that will be cleared
    function clearTick(State storage self, int24 tick) internal {
        delete self.ticks[tick];
    }
    /// @notice Transitions to next tick as needed by price movement
    /// @param self The Pool state struct
    /// @param tick The destination tick of the transition
    /// @param feeGrowthGlobal0X128 The all-time global fee growth, per unit of liquidity, in token0
    /// @param feeGrowthGlobal1X128 The all-time global fee growth, per unit of liquidity, in token1
    /// @return liquidityNet The amount of liquidity added (subtracted) when tick is crossed from left to right (right to left)
    function crossTick(State storage self, int24 tick, uint256 feeGrowthGlobal0X128, uint256 feeGrowthGlobal1X128)
        internal
        returns (int128 liquidityNet)
    {
        unchecked {
            TickInfo storage info = self.ticks[tick];
            info.feeGrowthOutside0X128 = feeGrowthGlobal0X128 - info.feeGrowthOutside0X128;
            info.feeGrowthOutside1X128 = feeGrowthGlobal1X128 - info.feeGrowthOutside1X128;
            liquidityNet = info.liquidityNet;
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {CustomRevert} from "./CustomRevert.sol";
/// @title Safe casting methods
/// @notice Contains methods for safely casting between types
library SafeCast {
    using CustomRevert for bytes4;
    error SafeCastOverflow();
    /// @notice Cast a uint256 to a uint160, revert on overflow
    /// @param x The uint256 to be downcasted
    /// @return y The downcasted integer, now type uint160
    function toUint160(uint256 x) internal pure returns (uint160 y) {
        y = uint160(x);
        if (y != x) SafeCastOverflow.selector.revertWith();
    }
    /// @notice Cast a uint256 to a uint128, revert on overflow
    /// @param x The uint256 to be downcasted
    /// @return y The downcasted integer, now type uint128
    function toUint128(uint256 x) internal pure returns (uint128 y) {
        y = uint128(x);
        if (x != y) SafeCastOverflow.selector.revertWith();
    }
    /// @notice Cast a int128 to a uint128, revert on overflow or underflow
    /// @param x The int128 to be casted
    /// @return y The casted integer, now type uint128
    function toUint128(int128 x) internal pure returns (uint128 y) {
        if (x < 0) SafeCastOverflow.selector.revertWith();
        y = uint128(x);
    }
    /// @notice Cast a int256 to a int128, revert on overflow or underflow
    /// @param x The int256 to be downcasted
    /// @return y The downcasted integer, now type int128
    function toInt128(int256 x) internal pure returns (int128 y) {
        y = int128(x);
        if (y != x) SafeCastOverflow.selector.revertWith();
    }
    /// @notice Cast a uint256 to a int256, revert on overflow
    /// @param x The uint256 to be casted
    /// @return y The casted integer, now type int256
    function toInt256(uint256 x) internal pure returns (int256 y) {
        y = int256(x);
        if (y < 0) SafeCastOverflow.selector.revertWith();
    }
    /// @notice Cast a uint256 to a int128, revert on overflow
    /// @param x The uint256 to be downcasted
    /// @return The downcasted integer, now type int128
    function toInt128(uint256 x) internal pure returns (int128) {
        if (x >= 1 << 127) SafeCastOverflow.selector.revertWith();
        return int128(int256(x));
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
import {FullMath} from "./FullMath.sol";
import {FixedPoint128} from "./FixedPoint128.sol";
import {LiquidityMath} from "./LiquidityMath.sol";
import {CustomRevert} from "./CustomRevert.sol";
/// @title Position
/// @notice Positions represent an owner address' liquidity between a lower and upper tick boundary
/// @dev Positions store additional state for tracking fees owed to the position
library Position {
    using CustomRevert for bytes4;
    /// @notice Cannot update a position with no liquidity
    error CannotUpdateEmptyPosition();
    // info stored for each user's position
    struct State {
        // the amount of liquidity owned by this position
        uint128 liquidity;
        // fee growth per unit of liquidity as of the last update to liquidity or fees owed
        uint256 feeGrowthInside0LastX128;
        uint256 feeGrowthInside1LastX128;
    }
    /// @notice Returns the State struct of a position, given an owner and position boundaries
    /// @param self The mapping containing all user positions
    /// @param owner The address of the position owner
    /// @param tickLower The lower tick boundary of the position
    /// @param tickUpper The upper tick boundary of the position
    /// @param salt A unique value to differentiate between multiple positions in the same range
    /// @return position The position info struct of the given owners' position
    function get(mapping(bytes32 => State) storage self, address owner, int24 tickLower, int24 tickUpper, bytes32 salt)
        internal
        view
        returns (State storage position)
    {
        bytes32 positionKey = calculatePositionKey(owner, tickLower, tickUpper, salt);
        position = self[positionKey];
    }
    /// @notice A helper function to calculate the position key
    /// @param owner The address of the position owner
    /// @param tickLower the lower tick boundary of the position
    /// @param tickUpper the upper tick boundary of the position
    /// @param salt A unique value to differentiate between multiple positions in the same range, by the same owner. Passed in by the caller.
    function calculatePositionKey(address owner, int24 tickLower, int24 tickUpper, bytes32 salt)
        internal
        pure
        returns (bytes32 positionKey)
    {
        // positionKey = keccak256(abi.encodePacked(owner, tickLower, tickUpper, salt))
        assembly ("memory-safe") {
            let fmp := mload(0x40)
            mstore(add(fmp, 0x26), salt) // [0x26, 0x46)
            mstore(add(fmp, 0x06), tickUpper) // [0x23, 0x26)
            mstore(add(fmp, 0x03), tickLower) // [0x20, 0x23)
            mstore(fmp, owner) // [0x0c, 0x20)
            positionKey := keccak256(add(fmp, 0x0c), 0x3a) // len is 58 bytes
            // now clean the memory we used
            mstore(add(fmp, 0x40), 0) // fmp+0x40 held salt
            mstore(add(fmp, 0x20), 0) // fmp+0x20 held tickLower, tickUpper, salt
            mstore(fmp, 0) // fmp held owner
        }
    }
    /// @notice Credits accumulated fees to a user's position
    /// @param self The individual position to update
    /// @param liquidityDelta The change in pool liquidity as a result of the position update
    /// @param feeGrowthInside0X128 The all-time fee growth in currency0, per unit of liquidity, inside the position's tick boundaries
    /// @param feeGrowthInside1X128 The all-time fee growth in currency1, per unit of liquidity, inside the position's tick boundaries
    /// @return feesOwed0 The amount of currency0 owed to the position owner
    /// @return feesOwed1 The amount of currency1 owed to the position owner
    function update(
        State storage self,
        int128 liquidityDelta,
        uint256 feeGrowthInside0X128,
        uint256 feeGrowthInside1X128
    ) internal returns (uint256 feesOwed0, uint256 feesOwed1) {
        uint128 liquidity = self.liquidity;
        if (liquidityDelta == 0) {
            // disallow pokes for 0 liquidity positions
            if (liquidity == 0) CannotUpdateEmptyPosition.selector.revertWith();
        } else {
            self.liquidity = LiquidityMath.addDelta(liquidity, liquidityDelta);
        }
        // calculate accumulated fees. overflow in the subtraction of fee growth is expected
        unchecked {
            feesOwed0 =
                FullMath.mulDiv(feeGrowthInside0X128 - self.feeGrowthInside0LastX128, liquidity, FixedPoint128.Q128);
            feesOwed1 =
                FullMath.mulDiv(feeGrowthInside1X128 - self.feeGrowthInside1LastX128, liquidity, FixedPoint128.Q128);
        }
        // update the position
        self.feeGrowthInside0LastX128 = feeGrowthInside0X128;
        self.feeGrowthInside1LastX128 = feeGrowthInside1X128;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {CustomRevert} from "./CustomRevert.sol";
/// @notice Library of helper functions for a pools LP fee
library LPFeeLibrary {
    using LPFeeLibrary for uint24;
    using CustomRevert for bytes4;
    /// @notice Thrown when the static or dynamic fee on a pool exceeds 100%.
    error LPFeeTooLarge(uint24 fee);
    /// @notice An lp fee of exactly 0b1000000... signals a dynamic fee pool. This isn't a valid static fee as it is > MAX_LP_FEE
    uint24 public constant DYNAMIC_FEE_FLAG = 0x800000;
    /// @notice the second bit of the fee returned by beforeSwap is used to signal if the stored LP fee should be overridden in this swap
    // only dynamic-fee pools can return a fee via the beforeSwap hook
    uint24 public constant OVERRIDE_FEE_FLAG = 0x400000;
    /// @notice mask to remove the override fee flag from a fee returned by the beforeSwaphook
    uint24 public constant REMOVE_OVERRIDE_MASK = 0xBFFFFF;
    /// @notice the lp fee is represented in hundredths of a bip, so the max is 100%
    uint24 public constant MAX_LP_FEE = 1000000;
    /// @notice returns true if a pool's LP fee signals that the pool has a dynamic fee
    /// @param self The fee to check
    /// @return bool True of the fee is dynamic
    function isDynamicFee(uint24 self) internal pure returns (bool) {
        return self == DYNAMIC_FEE_FLAG;
    }
    /// @notice returns true if an LP fee is valid, aka not above the maximum permitted fee
    /// @param self The fee to check
    /// @return bool True of the fee is valid
    function isValid(uint24 self) internal pure returns (bool) {
        return self <= MAX_LP_FEE;
    }
    /// @notice validates whether an LP fee is larger than the maximum, and reverts if invalid
    /// @param self The fee to validate
    function validate(uint24 self) internal pure {
        if (!self.isValid()) LPFeeTooLarge.selector.revertWith(self);
    }
    /// @notice gets and validates the initial LP fee for a pool. Dynamic fee pools have an initial fee of 0.
    /// @dev if a dynamic fee pool wants a non-0 initial fee, it should call `updateDynamicLPFee` in the afterInitialize hook
    /// @param self The fee to get the initial LP from
    /// @return initialFee 0 if the fee is dynamic, otherwise the fee (if valid)
    function getInitialLPFee(uint24 self) internal pure returns (uint24) {
        // the initial fee for a dynamic fee pool is 0
        if (self.isDynamicFee()) return 0;
        self.validate();
        return self;
    }
    /// @notice returns true if the fee has the override flag set (2nd highest bit of the uint24)
    /// @param self The fee to check
    /// @return bool True of the fee has the override flag set
    function isOverride(uint24 self) internal pure returns (bool) {
        return self & OVERRIDE_FEE_FLAG != 0;
    }
    /// @notice returns a fee with the override flag removed
    /// @param self The fee to remove the override flag from
    /// @return fee The fee without the override flag set
    function removeOverrideFlag(uint24 self) internal pure returns (uint24) {
        return self & REMOVE_OVERRIDE_MASK;
    }
    /// @notice Removes the override flag and validates the fee (reverts if the fee is too large)
    /// @param self The fee to remove the override flag from, and then validate
    /// @return fee The fee without the override flag set (if valid)
    function removeOverrideFlagAndValidate(uint24 self) internal pure returns (uint24 fee) {
        fee = self.removeOverrideFlag();
        fee.validate();
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {IERC20Minimal} from "../interfaces/external/IERC20Minimal.sol";
import {CustomRevert} from "../libraries/CustomRevert.sol";
type Currency is address;
using {greaterThan as >, lessThan as <, greaterThanOrEqualTo as >=, equals as ==} for Currency global;
using CurrencyLibrary for Currency global;
function equals(Currency currency, Currency other) pure returns (bool) {
    return Currency.unwrap(currency) == Currency.unwrap(other);
}
function greaterThan(Currency currency, Currency other) pure returns (bool) {
    return Currency.unwrap(currency) > Currency.unwrap(other);
}
function lessThan(Currency currency, Currency other) pure returns (bool) {
    return Currency.unwrap(currency) < Currency.unwrap(other);
}
function greaterThanOrEqualTo(Currency currency, Currency other) pure returns (bool) {
    return Currency.unwrap(currency) >= Currency.unwrap(other);
}
/// @title CurrencyLibrary
/// @dev This library allows for transferring and holding native tokens and ERC20 tokens
library CurrencyLibrary {
    /// @notice Additional context for ERC-7751 wrapped error when a native transfer fails
    error NativeTransferFailed();
    /// @notice Additional context for ERC-7751 wrapped error when an ERC20 transfer fails
    error ERC20TransferFailed();
    /// @notice A constant to represent the native currency
    Currency public constant ADDRESS_ZERO = Currency.wrap(address(0));
    function transfer(Currency currency, address to, uint256 amount) internal {
        // altered from https://github.com/transmissions11/solmate/blob/44a9963d4c78111f77caa0e65d677b8b46d6f2e6/src/utils/SafeTransferLib.sol
        // modified custom error selectors
        bool success;
        if (currency.isAddressZero()) {
            assembly ("memory-safe") {
                // Transfer the ETH and revert if it fails.
                success := call(gas(), to, amount, 0, 0, 0, 0)
            }
            // revert with NativeTransferFailed, containing the bubbled up error as an argument
            if (!success) {
                CustomRevert.bubbleUpAndRevertWith(to, bytes4(0), NativeTransferFailed.selector);
            }
        } else {
            assembly ("memory-safe") {
                // Get a pointer to some free memory.
                let fmp := mload(0x40)
                // Write the abi-encoded calldata into memory, beginning with the function selector.
                mstore(fmp, 0xa9059cbb00000000000000000000000000000000000000000000000000000000)
                mstore(add(fmp, 4), and(to, 0xffffffffffffffffffffffffffffffffffffffff)) // Append and mask the "to" argument.
                mstore(add(fmp, 36), amount) // Append the "amount" argument. Masking not required as it's a full 32 byte type.
                success :=
                    and(
                        // Set success to whether the call reverted, if not we check it either
                        // returned exactly 1 (can't just be non-zero data), or had no return data.
                        or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
                        // We use 68 because the length of our calldata totals up like so: 4 + 32 * 2.
                        // We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
                        // Counterintuitively, this call must be positioned second to the or() call in the
                        // surrounding and() call or else returndatasize() will be zero during the computation.
                        call(gas(), currency, 0, fmp, 68, 0, 32)
                    )
                // Now clean the memory we used
                mstore(fmp, 0) // 4 byte `selector` and 28 bytes of `to` were stored here
                mstore(add(fmp, 0x20), 0) // 4 bytes of `to` and 28 bytes of `amount` were stored here
                mstore(add(fmp, 0x40), 0) // 4 bytes of `amount` were stored here
            }
            // revert with ERC20TransferFailed, containing the bubbled up error as an argument
            if (!success) {
                CustomRevert.bubbleUpAndRevertWith(
                    Currency.unwrap(currency), IERC20Minimal.transfer.selector, ERC20TransferFailed.selector
                );
            }
        }
    }
    function balanceOfSelf(Currency currency) internal view returns (uint256) {
        if (currency.isAddressZero()) {
            return address(this).balance;
        } else {
            return IERC20Minimal(Currency.unwrap(currency)).balanceOf(address(this));
        }
    }
    function balanceOf(Currency currency, address owner) internal view returns (uint256) {
        if (currency.isAddressZero()) {
            return owner.balance;
        } else {
            return IERC20Minimal(Currency.unwrap(currency)).balanceOf(owner);
        }
    }
    function isAddressZero(Currency currency) internal pure returns (bool) {
        return Currency.unwrap(currency) == Currency.unwrap(ADDRESS_ZERO);
    }
    function toId(Currency currency) internal pure returns (uint256) {
        return uint160(Currency.unwrap(currency));
    }
    // If the upper 12 bytes are non-zero, they will be zero-ed out
    // Therefore, fromId() and toId() are not inverses of each other
    function fromId(uint256 id) internal pure returns (Currency) {
        return Currency.wrap(address(uint160(id)));
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {Currency} from "./Currency.sol";
import {IHooks} from "../interfaces/IHooks.sol";
import {PoolIdLibrary} from "./PoolId.sol";
using PoolIdLibrary for PoolKey global;
/// @notice Returns the key for identifying a pool
struct PoolKey {
    /// @notice The lower currency of the pool, sorted numerically
    Currency currency0;
    /// @notice The higher currency of the pool, sorted numerically
    Currency currency1;
    /// @notice The pool LP fee, capped at 1_000_000. If the highest bit is 1, the pool has a dynamic fee and must be exactly equal to 0x800000
    uint24 fee;
    /// @notice Ticks that involve positions must be a multiple of tick spacing
    int24 tickSpacing;
    /// @notice The hooks of the pool
    IHooks hooks;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {BitMath} from "./BitMath.sol";
import {CustomRevert} from "./CustomRevert.sol";
/// @title Math library for computing sqrt prices from ticks and vice versa
/// @notice Computes sqrt price for ticks of size 1.0001, i.e. sqrt(1.0001^tick) as fixed point Q64.96 numbers. Supports
/// prices between 2**-128 and 2**128
library TickMath {
    using CustomRevert for bytes4;
    /// @notice Thrown when the tick passed to #getSqrtPriceAtTick is not between MIN_TICK and MAX_TICK
    error InvalidTick(int24 tick);
    /// @notice Thrown when the price passed to #getTickAtSqrtPrice does not correspond to a price between MIN_TICK and MAX_TICK
    error InvalidSqrtPrice(uint160 sqrtPriceX96);
    /// @dev The minimum tick that may be passed to #getSqrtPriceAtTick computed from log base 1.0001 of 2**-128
    /// @dev If ever MIN_TICK and MAX_TICK are not centered around 0, the absTick logic in getSqrtPriceAtTick cannot be used
    int24 internal constant MIN_TICK = -887272;
    /// @dev The maximum tick that may be passed to #getSqrtPriceAtTick computed from log base 1.0001 of 2**128
    /// @dev If ever MIN_TICK and MAX_TICK are not centered around 0, the absTick logic in getSqrtPriceAtTick cannot be used
    int24 internal constant MAX_TICK = 887272;
    /// @dev The minimum tick spacing value drawn from the range of type int16 that is greater than 0, i.e. min from the range [1, 32767]
    int24 internal constant MIN_TICK_SPACING = 1;
    /// @dev The maximum tick spacing value drawn from the range of type int16, i.e. max from the range [1, 32767]
    int24 internal constant MAX_TICK_SPACING = type(int16).max;
    /// @dev The minimum value that can be returned from #getSqrtPriceAtTick. Equivalent to getSqrtPriceAtTick(MIN_TICK)
    uint160 internal constant MIN_SQRT_PRICE = 4295128739;
    /// @dev The maximum value that can be returned from #getSqrtPriceAtTick. Equivalent to getSqrtPriceAtTick(MAX_TICK)
    uint160 internal constant MAX_SQRT_PRICE = 1461446703485210103287273052203988822378723970342;
    /// @dev A threshold used for optimized bounds check, equals `MAX_SQRT_PRICE - MIN_SQRT_PRICE - 1`
    uint160 internal constant MAX_SQRT_PRICE_MINUS_MIN_SQRT_PRICE_MINUS_ONE =
        1461446703485210103287273052203988822378723970342 - 4295128739 - 1;
    /// @notice Given a tickSpacing, compute the maximum usable tick
    function maxUsableTick(int24 tickSpacing) internal pure returns (int24) {
        unchecked {
            return (MAX_TICK / tickSpacing) * tickSpacing;
        }
    }
    /// @notice Given a tickSpacing, compute the minimum usable tick
    function minUsableTick(int24 tickSpacing) internal pure returns (int24) {
        unchecked {
            return (MIN_TICK / tickSpacing) * tickSpacing;
        }
    }
    /// @notice Calculates sqrt(1.0001^tick) * 2^96
    /// @dev Throws if |tick| > max tick
    /// @param tick The input tick for the above formula
    /// @return sqrtPriceX96 A Fixed point Q64.96 number representing the sqrt of the price of the two assets (currency1/currency0)
    /// at the given tick
    function getSqrtPriceAtTick(int24 tick) internal pure returns (uint160 sqrtPriceX96) {
        unchecked {
            uint256 absTick;
            assembly ("memory-safe") {
                tick := signextend(2, tick)
                // mask = 0 if tick >= 0 else -1 (all 1s)
                let mask := sar(255, tick)
                // if tick >= 0, |tick| = tick = 0 ^ tick
                // if tick < 0, |tick| = ~~|tick| = ~(-|tick| - 1) = ~(tick - 1) = (-1) ^ (tick - 1)
                // either way, |tick| = mask ^ (tick + mask)
                absTick := xor(mask, add(mask, tick))
            }
            if (absTick > uint256(int256(MAX_TICK))) InvalidTick.selector.revertWith(tick);
            // The tick is decomposed into bits, and for each bit with index i that is set, the product of 1/sqrt(1.0001^(2^i))
            // is calculated (using Q128.128). The constants used for this calculation are rounded to the nearest integer
            // Equivalent to:
            //     price = absTick & 0x1 != 0 ? 0xfffcb933bd6fad37aa2d162d1a594001 : 0x100000000000000000000000000000000;
            //     or price = int(2**128 / sqrt(1.0001)) if (absTick & 0x1) else 1 << 128
            uint256 price;
            assembly ("memory-safe") {
                price := xor(shl(128, 1), mul(xor(shl(128, 1), 0xfffcb933bd6fad37aa2d162d1a594001), and(absTick, 0x1)))
            }
            if (absTick & 0x2 != 0) price = (price * 0xfff97272373d413259a46990580e213a) >> 128;
            if (absTick & 0x4 != 0) price = (price * 0xfff2e50f5f656932ef12357cf3c7fdcc) >> 128;
            if (absTick & 0x8 != 0) price = (price * 0xffe5caca7e10e4e61c3624eaa0941cd0) >> 128;
            if (absTick & 0x10 != 0) price = (price * 0xffcb9843d60f6159c9db58835c926644) >> 128;
            if (absTick & 0x20 != 0) price = (price * 0xff973b41fa98c081472e6896dfb254c0) >> 128;
            if (absTick & 0x40 != 0) price = (price * 0xff2ea16466c96a3843ec78b326b52861) >> 128;
            if (absTick & 0x80 != 0) price = (price * 0xfe5dee046a99a2a811c461f1969c3053) >> 128;
            if (absTick & 0x100 != 0) price = (price * 0xfcbe86c7900a88aedcffc83b479aa3a4) >> 128;
            if (absTick & 0x200 != 0) price = (price * 0xf987a7253ac413176f2b074cf7815e54) >> 128;
            if (absTick & 0x400 != 0) price = (price * 0xf3392b0822b70005940c7a398e4b70f3) >> 128;
            if (absTick & 0x800 != 0) price = (price * 0xe7159475a2c29b7443b29c7fa6e889d9) >> 128;
            if (absTick & 0x1000 != 0) price = (price * 0xd097f3bdfd2022b8845ad8f792aa5825) >> 128;
            if (absTick & 0x2000 != 0) price = (price * 0xa9f746462d870fdf8a65dc1f90e061e5) >> 128;
            if (absTick & 0x4000 != 0) price = (price * 0x70d869a156d2a1b890bb3df62baf32f7) >> 128;
            if (absTick & 0x8000 != 0) price = (price * 0x31be135f97d08fd981231505542fcfa6) >> 128;
            if (absTick & 0x10000 != 0) price = (price * 0x9aa508b5b7a84e1c677de54f3e99bc9) >> 128;
            if (absTick & 0x20000 != 0) price = (price * 0x5d6af8dedb81196699c329225ee604) >> 128;
            if (absTick & 0x40000 != 0) price = (price * 0x2216e584f5fa1ea926041bedfe98) >> 128;
            if (absTick & 0x80000 != 0) price = (price * 0x48a170391f7dc42444e8fa2) >> 128;
            assembly ("memory-safe") {
                // if (tick > 0) price = type(uint256).max / price;
                if sgt(tick, 0) { price := div(not(0), price) }
                // this divides by 1<<32 rounding up to go from a Q128.128 to a Q128.96.
                // we then downcast because we know the result always fits within 160 bits due to our tick input constraint
                // we round up in the division so getTickAtSqrtPrice of the output price is always consistent
                // `sub(shl(32, 1), 1)` is `type(uint32).max`
                // `price + type(uint32).max` will not overflow because `price` fits in 192 bits
                sqrtPriceX96 := shr(32, add(price, sub(shl(32, 1), 1)))
            }
        }
    }
    /// @notice Calculates the greatest tick value such that getSqrtPriceAtTick(tick) <= sqrtPriceX96
    /// @dev Throws in case sqrtPriceX96 < MIN_SQRT_PRICE, as MIN_SQRT_PRICE is the lowest value getSqrtPriceAtTick may
    /// ever return.
    /// @param sqrtPriceX96 The sqrt price for which to compute the tick as a Q64.96
    /// @return tick The greatest tick for which the getSqrtPriceAtTick(tick) is less than or equal to the input sqrtPriceX96
    function getTickAtSqrtPrice(uint160 sqrtPriceX96) internal pure returns (int24 tick) {
        unchecked {
            // Equivalent: if (sqrtPriceX96 < MIN_SQRT_PRICE || sqrtPriceX96 >= MAX_SQRT_PRICE) revert InvalidSqrtPrice();
            // second inequality must be >= because the price can never reach the price at the max tick
            // if sqrtPriceX96 < MIN_SQRT_PRICE, the `sub` underflows and `gt` is true
            // if sqrtPriceX96 >= MAX_SQRT_PRICE, sqrtPriceX96 - MIN_SQRT_PRICE > MAX_SQRT_PRICE - MIN_SQRT_PRICE - 1
            if ((sqrtPriceX96 - MIN_SQRT_PRICE) > MAX_SQRT_PRICE_MINUS_MIN_SQRT_PRICE_MINUS_ONE) {
                InvalidSqrtPrice.selector.revertWith(sqrtPriceX96);
            }
            uint256 price = uint256(sqrtPriceX96) << 32;
            uint256 r = price;
            uint256 msb = BitMath.mostSignificantBit(r);
            if (msb >= 128) r = price >> (msb - 127);
            else r = price << (127 - msb);
            int256 log_2 = (int256(msb) - 128) << 64;
            assembly ("memory-safe") {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(63, f))
                r := shr(f, r)
            }
            assembly ("memory-safe") {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(62, f))
                r := shr(f, r)
            }
            assembly ("memory-safe") {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(61, f))
                r := shr(f, r)
            }
            assembly ("memory-safe") {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(60, f))
                r := shr(f, r)
            }
            assembly ("memory-safe") {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(59, f))
                r := shr(f, r)
            }
            assembly ("memory-safe") {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(58, f))
                r := shr(f, r)
            }
            assembly ("memory-safe") {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(57, f))
                r := shr(f, r)
            }
            assembly ("memory-safe") {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(56, f))
                r := shr(f, r)
            }
            assembly ("memory-safe") {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(55, f))
                r := shr(f, r)
            }
            assembly ("memory-safe") {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(54, f))
                r := shr(f, r)
            }
            assembly ("memory-safe") {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(53, f))
                r := shr(f, r)
            }
            assembly ("memory-safe") {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(52, f))
                r := shr(f, r)
            }
            assembly ("memory-safe") {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(51, f))
                r := shr(f, r)
            }
            assembly ("memory-safe") {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(50, f))
            }
            int256 log_sqrt10001 = log_2 * 255738958999603826347141; // Q22.128 number
            // Magic number represents the ceiling of the maximum value of the error when approximating log_sqrt10001(x)
            int24 tickLow = int24((log_sqrt10001 - 3402992956809132418596140100660247210) >> 128);
            // Magic number represents the minimum value of the error when approximating log_sqrt10001(x), when
            // sqrtPrice is from the range (2^-64, 2^64). This is safe as MIN_SQRT_PRICE is more than 2^-64. If MIN_SQRT_PRICE
            // is changed, this may need to be changed too
            int24 tickHi = int24((log_sqrt10001 + 291339464771989622907027621153398088495) >> 128);
            tick = tickLow == tickHi ? tickLow : getSqrtPriceAtTick(tickHi) <= sqrtPriceX96 ? tickHi : tickLow;
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {CustomRevert} from "./libraries/CustomRevert.sol";
/// @title Prevents delegatecall to a contract
/// @notice Base contract that provides a modifier for preventing delegatecall to methods in a child contract
abstract contract NoDelegateCall {
    using CustomRevert for bytes4;
    error DelegateCallNotAllowed();
    /// @dev The original address of this contract
    address private immutable original;
    constructor() {
        // Immutables are computed in the init code of the contract, and then inlined into the deployed bytecode.
        // In other words, this variable won't change when it's checked at runtime.
        original = address(this);
    }
    /// @dev Private method is used instead of inlining into modifier because modifiers are copied into each method,
    ///     and the use of immutable means the address bytes are copied in every place the modifier is used.
    function checkNotDelegateCall() private view {
        if (address(this) != original) DelegateCallNotAllowed.selector.revertWith();
    }
    /// @notice Prevents delegatecall into the modified method
    modifier noDelegateCall() {
        checkNotDelegateCall();
        _;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {PoolKey} from "../types/PoolKey.sol";
import {BalanceDelta} from "../types/BalanceDelta.sol";
import {IPoolManager} from "./IPoolManager.sol";
import {BeforeSwapDelta} from "../types/BeforeSwapDelta.sol";
/// @notice V4 decides whether to invoke specific hooks by inspecting the least significant bits
/// of the address that the hooks contract is deployed to.
/// For example, a hooks contract deployed to address: 0x0000000000000000000000000000000000002400
/// has the lowest bits '10 0100 0000 0000' which would cause the 'before initialize' and 'after add liquidity' hooks to be used.
/// See the Hooks library for the full spec.
/// @dev Should only be callable by the v4 PoolManager.
interface IHooks {
    /// @notice The hook called before the state of a pool is initialized
    /// @param sender The initial msg.sender for the initialize call
    /// @param key The key for the pool being initialized
    /// @param sqrtPriceX96 The sqrt(price) of the pool as a Q64.96
    /// @return bytes4 The function selector for the hook
    function beforeInitialize(address sender, PoolKey calldata key, uint160 sqrtPriceX96) external returns (bytes4);
    /// @notice The hook called after the state of a pool is initialized
    /// @param sender The initial msg.sender for the initialize call
    /// @param key The key for the pool being initialized
    /// @param sqrtPriceX96 The sqrt(price) of the pool as a Q64.96
    /// @param tick The current tick after the state of a pool is initialized
    /// @return bytes4 The function selector for the hook
    function afterInitialize(address sender, PoolKey calldata key, uint160 sqrtPriceX96, int24 tick)
        external
        returns (bytes4);
    /// @notice The hook called before liquidity is added
    /// @param sender The initial msg.sender for the add liquidity call
    /// @param key The key for the pool
    /// @param params The parameters for adding liquidity
    /// @param hookData Arbitrary data handed into the PoolManager by the liquidity provider to be passed on to the hook
    /// @return bytes4 The function selector for the hook
    function beforeAddLiquidity(
        address sender,
        PoolKey calldata key,
        IPoolManager.ModifyLiquidityParams calldata params,
        bytes calldata hookData
    ) external returns (bytes4);
    /// @notice The hook called after liquidity is added
    /// @param sender The initial msg.sender for the add liquidity call
    /// @param key The key for the pool
    /// @param params The parameters for adding liquidity
    /// @param delta The caller's balance delta after adding liquidity; the sum of principal delta, fees accrued, and hook delta
    /// @param feesAccrued The fees accrued since the last time fees were collected from this position
    /// @param hookData Arbitrary data handed into the PoolManager by the liquidity provider to be passed on to the hook
    /// @return bytes4 The function selector for the hook
    /// @return BalanceDelta The hook's delta in token0 and token1. Positive: the hook is owed/took currency, negative: the hook owes/sent currency
    function afterAddLiquidity(
        address sender,
        PoolKey calldata key,
        IPoolManager.ModifyLiquidityParams calldata params,
        BalanceDelta delta,
        BalanceDelta feesAccrued,
        bytes calldata hookData
    ) external returns (bytes4, BalanceDelta);
    /// @notice The hook called before liquidity is removed
    /// @param sender The initial msg.sender for the remove liquidity call
    /// @param key The key for the pool
    /// @param params The parameters for removing liquidity
    /// @param hookData Arbitrary data handed into the PoolManager by the liquidity provider to be be passed on to the hook
    /// @return bytes4 The function selector for the hook
    function beforeRemoveLiquidity(
        address sender,
        PoolKey calldata key,
        IPoolManager.ModifyLiquidityParams calldata params,
        bytes calldata hookData
    ) external returns (bytes4);
    /// @notice The hook called after liquidity is removed
    /// @param sender The initial msg.sender for the remove liquidity call
    /// @param key The key for the pool
    /// @param params The parameters for removing liquidity
    /// @param delta The caller's balance delta after removing liquidity; the sum of principal delta, fees accrued, and hook delta
    /// @param feesAccrued The fees accrued since the last time fees were collected from this position
    /// @param hookData Arbitrary data handed into the PoolManager by the liquidity provider to be be passed on to the hook
    /// @return bytes4 The function selector for the hook
    /// @return BalanceDelta The hook's delta in token0 and token1. Positive: the hook is owed/took currency, negative: the hook owes/sent currency
    function afterRemoveLiquidity(
        address sender,
        PoolKey calldata key,
        IPoolManager.ModifyLiquidityParams calldata params,
        BalanceDelta delta,
        BalanceDelta feesAccrued,
        bytes calldata hookData
    ) external returns (bytes4, BalanceDelta);
    /// @notice The hook called before a swap
    /// @param sender The initial msg.sender for the swap call
    /// @param key The key for the pool
    /// @param params The parameters for the swap
    /// @param hookData Arbitrary data handed into the PoolManager by the swapper to be be passed on to the hook
    /// @return bytes4 The function selector for the hook
    /// @return BeforeSwapDelta The hook's delta in specified and unspecified currencies. Positive: the hook is owed/took currency, negative: the hook owes/sent currency
    /// @return uint24 Optionally override the lp fee, only used if three conditions are met: 1. the Pool has a dynamic fee, 2. the value's 2nd highest bit is set (23rd bit, 0x400000), and 3. the value is less than or equal to the maximum fee (1 million)
    function beforeSwap(
        address sender,
        PoolKey calldata key,
        IPoolManager.SwapParams calldata params,
        bytes calldata hookData
    ) external returns (bytes4, BeforeSwapDelta, uint24);
    /// @notice The hook called after a swap
    /// @param sender The initial msg.sender for the swap call
    /// @param key The key for the pool
    /// @param params The parameters for the swap
    /// @param delta The amount owed to the caller (positive) or owed to the pool (negative)
    /// @param hookData Arbitrary data handed into the PoolManager by the swapper to be be passed on to the hook
    /// @return bytes4 The function selector for the hook
    /// @return int128 The hook's delta in unspecified currency. Positive: the hook is owed/took currency, negative: the hook owes/sent currency
    function afterSwap(
        address sender,
        PoolKey calldata key,
        IPoolManager.SwapParams calldata params,
        BalanceDelta delta,
        bytes calldata hookData
    ) external returns (bytes4, int128);
    /// @notice The hook called before donate
    /// @param sender The initial msg.sender for the donate call
    /// @param key The key for the pool
    /// @param amount0 The amount of token0 being donated
    /// @param amount1 The amount of token1 being donated
    /// @param hookData Arbitrary data handed into the PoolManager by the donor to be be passed on to the hook
    /// @return bytes4 The function selector for the hook
    function beforeDonate(
        address sender,
        PoolKey calldata key,
        uint256 amount0,
        uint256 amount1,
        bytes calldata hookData
    ) external returns (bytes4);
    /// @notice The hook called after donate
    /// @param sender The initial msg.sender for the donate call
    /// @param key The key for the pool
    /// @param amount0 The amount of token0 being donated
    /// @param amount1 The amount of token1 being donated
    /// @param hookData Arbitrary data handed into the PoolManager by the donor to be be passed on to the hook
    /// @return bytes4 The function selector for the hook
    function afterDonate(
        address sender,
        PoolKey calldata key,
        uint256 amount0,
        uint256 amount1,
        bytes calldata hookData
    ) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;
import {Currency} from "../types/Currency.sol";
import {PoolKey} from "../types/PoolKey.sol";
import {IHooks} from "./IHooks.sol";
import {IERC6909Claims} from "./external/IERC6909Claims.sol";
import {IProtocolFees} from "./IProtocolFees.sol";
import {BalanceDelta} from "../types/BalanceDelta.sol";
import {PoolId} from "../types/PoolId.sol";
import {IExtsload} from "./IExtsload.sol";
import {IExttload} from "./IExttload.sol";
/// @notice Interface for the PoolManager
interface IPoolManager is IProtocolFees, IERC6909Claims, IExtsload, IExttload {
    /// @notice Thrown when a currency is not netted out after the contract is unlocked
    error CurrencyNotSettled();
    /// @notice Thrown when trying to interact with a non-initialized pool
    error PoolNotInitialized();
    /// @notice Thrown when unlock is called, but the contract is already unlocked
    error AlreadyUnlocked();
    /// @notice Thrown when a function is called that requires the contract to be unlocked, but it is not
    error ManagerLocked();
    /// @notice Pools are limited to type(int16).max tickSpacing in #initialize, to prevent overflow
    error TickSpacingTooLarge(int24 tickSpacing);
    /// @notice Pools must have a positive non-zero tickSpacing passed to #initialize
    error TickSpacingTooSmall(int24 tickSpacing);
    /// @notice PoolKey must have currencies where address(currency0) < address(currency1)
    error CurrenciesOutOfOrderOrEqual(address currency0, address currency1);
    /// @notice Thrown when a call to updateDynamicLPFee is made by an address that is not the hook,
    /// or on a pool that does not have a dynamic swap fee.
    error UnauthorizedDynamicLPFeeUpdate();
    /// @notice Thrown when trying to swap amount of 0
    error SwapAmountCannotBeZero();
    ///@notice Thrown when native currency is passed to a non native settlement
    error NonzeroNativeValue();
    /// @notice Thrown when `clear` is called with an amount that is not exactly equal to the open currency delta.
    error MustClearExactPositiveDelta();
    /// @notice Emitted when a new pool is initialized
    /// @param id The abi encoded hash of the pool key struct for the new pool
    /// @param currency0 The first currency of the pool by address sort order
    /// @param currency1 The second currency of the pool by address sort order
    /// @param fee The fee collected upon every swap in the pool, denominated in hundredths of a bip
    /// @param tickSpacing The minimum number of ticks between initialized ticks
    /// @param hooks The hooks contract address for the pool, or address(0) if none
    /// @param sqrtPriceX96 The price of the pool on initialization
    /// @param tick The initial tick of the pool corresponding to the initialized price
    event Initialize(
        PoolId indexed id,
        Currency indexed currency0,
        Currency indexed currency1,
        uint24 fee,
        int24 tickSpacing,
        IHooks hooks,
        uint160 sqrtPriceX96,
        int24 tick
    );
    /// @notice Emitted when a liquidity position is modified
    /// @param id The abi encoded hash of the pool key struct for the pool that was modified
    /// @param sender The address that modified the pool
    /// @param tickLower The lower tick of the position
    /// @param tickUpper The upper tick of the position
    /// @param liquidityDelta The amount of liquidity that was added or removed
    /// @param salt The extra data to make positions unique
    event ModifyLiquidity(
        PoolId indexed id, address indexed sender, int24 tickLower, int24 tickUpper, int256 liquidityDelta, bytes32 salt
    );
    /// @notice Emitted for swaps between currency0 and currency1
    /// @param id The abi encoded hash of the pool key struct for the pool that was modified
    /// @param sender The address that initiated the swap call, and that received the callback
    /// @param amount0 The delta of the currency0 balance of the pool
    /// @param amount1 The delta of the currency1 balance of the pool
    /// @param sqrtPriceX96 The sqrt(price) of the pool after the swap, as a Q64.96
    /// @param liquidity The liquidity of the pool after the swap
    /// @param tick The log base 1.0001 of the price of the pool after the swap
    /// @param fee The swap fee in hundredths of a bip
    event Swap(
        PoolId indexed id,
        address indexed sender,
        int128 amount0,
        int128 amount1,
        uint160 sqrtPriceX96,
        uint128 liquidity,
        int24 tick,
        uint24 fee
    );
    /// @notice Emitted for donations
    /// @param id The abi encoded hash of the pool key struct for the pool that was donated to
    /// @param sender The address that initiated the donate call
    /// @param amount0 The amount donated in currency0
    /// @param amount1 The amount donated in currency1
    event Donate(PoolId indexed id, address indexed sender, uint256 amount0, uint256 amount1);
    /// @notice All interactions on the contract that account deltas require unlocking. A caller that calls `unlock` must implement
    /// `IUnlockCallback(msg.sender).unlockCallback(data)`, where they interact with the remaining functions on this contract.
    /// @dev The only functions callable without an unlocking are `initialize` and `updateDynamicLPFee`
    /// @param data Any data to pass to the callback, via `IUnlockCallback(msg.sender).unlockCallback(data)`
    /// @return The data returned by the call to `IUnlockCallback(msg.sender).unlockCallback(data)`
    function unlock(bytes calldata data) external returns (bytes memory);
    /// @notice Initialize the state for a given pool ID
    /// @dev A swap fee totaling MAX_SWAP_FEE (100%) makes exact output swaps impossible since the input is entirely consumed by the fee
    /// @param key The pool key for the pool to initialize
    /// @param sqrtPriceX96 The initial square root price
    /// @return tick The initial tick of the pool
    function initialize(PoolKey memory key, uint160 sqrtPriceX96) external returns (int24 tick);
    struct ModifyLiquidityParams {
        // the lower and upper tick of the position
        int24 tickLower;
        int24 tickUpper;
        // how to modify the liquidity
        int256 liquidityDelta;
        // a value to set if you want unique liquidity positions at the same range
        bytes32 salt;
    }
    /// @notice Modify the liquidity for the given pool
    /// @dev Poke by calling with a zero liquidityDelta
    /// @param key The pool to modify liquidity in
    /// @param params The parameters for modifying the liquidity
    /// @param hookData The data to pass through to the add/removeLiquidity hooks
    /// @return callerDelta The balance delta of the caller of modifyLiquidity. This is the total of both principal, fee deltas, and hook deltas if applicable
    /// @return feesAccrued The balance delta of the fees generated in the liquidity range. Returned for informational purposes
    /// @dev Note that feesAccrued can be artificially inflated by a malicious actor and integrators should be careful using the value
    /// For pools with a single liquidity position, actors can donate to themselves to inflate feeGrowthGlobal (and consequently feesAccrued)
    /// atomically donating and collecting fees in the same unlockCallback may make the inflated value more extreme
    function modifyLiquidity(PoolKey memory key, ModifyLiquidityParams memory params, bytes calldata hookData)
        external
        returns (BalanceDelta callerDelta, BalanceDelta feesAccrued);
    struct SwapParams {
        /// Whether to swap token0 for token1 or vice versa
        bool zeroForOne;
        /// The desired input amount if negative (exactIn), or the desired output amount if positive (exactOut)
        int256 amountSpecified;
        /// The sqrt price at which, if reached, the swap will stop executing
        uint160 sqrtPriceLimitX96;
    }
    /// @notice Swap against the given pool
    /// @param key The pool to swap in
    /// @param params The parameters for swapping
    /// @param hookData The data to pass through to the swap hooks
    /// @return swapDelta The balance delta of the address swapping
    /// @dev Swapping on low liquidity pools may cause unexpected swap amounts when liquidity available is less than amountSpecified.
    /// Additionally note that if interacting with hooks that have the BEFORE_SWAP_RETURNS_DELTA_FLAG or AFTER_SWAP_RETURNS_DELTA_FLAG
    /// the hook may alter the swap input/output. Integrators should perform checks on the returned swapDelta.
    function swap(PoolKey memory key, SwapParams memory params, bytes calldata hookData)
        external
        returns (BalanceDelta swapDelta);
    /// @notice Donate the given currency amounts to the in-range liquidity providers of a pool
    /// @dev Calls to donate can be frontrun adding just-in-time liquidity, with the aim of receiving a portion donated funds.
    /// Donors should keep this in mind when designing donation mechanisms.
    /// @dev This function donates to in-range LPs at slot0.tick. In certain edge-cases of the swap algorithm, the `sqrtPrice` of
    /// a pool can be at the lower boundary of tick `n`, but the `slot0.tick` of the pool is already `n - 1`. In this case a call to
    /// `donate` would donate to tick `n - 1` (slot0.tick) not tick `n` (getTickAtSqrtPrice(slot0.sqrtPriceX96)).
    /// Read the comments in `Pool.swap()` for more information about this.
    /// @param key The key of the pool to donate to
    /// @param amount0 The amount of currency0 to donate
    /// @param amount1 The amount of currency1 to donate
    /// @param hookData The data to pass through to the donate hooks
    /// @return BalanceDelta The delta of the caller after the donate
    function donate(PoolKey memory key, uint256 amount0, uint256 amount1, bytes calldata hookData)
        external
        returns (BalanceDelta);
    /// @notice Writes the current ERC20 balance of the specified currency to transient storage
    /// This is used to checkpoint balances for the manager and derive deltas for the caller.
    /// @dev This MUST be called before any ERC20 tokens are sent into the contract, but can be skipped
    /// for native tokens because the amount to settle is determined by the sent value.
    /// However, if an ERC20 token has been synced and not settled, and the caller instead wants to settle
    /// native funds, this function can be called with the native currency to then be able to settle the native currency
    function sync(Currency currency) external;
    /// @notice Called by the user to net out some value owed to the user
    /// @dev Will revert if the requested amount is not available, consider using `mint` instead
    /// @dev Can also be used as a mechanism for free flash loans
    /// @param currency The currency to withdraw from the pool manager
    /// @param to The address to withdraw to
    /// @param amount The amount of currency to withdraw
    function take(Currency currency, address to, uint256 amount) external;
    /// @notice Called by the user to pay what is owed
    /// @return paid The amount of currency settled
    function settle() external payable returns (uint256 paid);
    /// @notice Called by the user to pay on behalf of another address
    /// @param recipient The address to credit for the payment
    /// @return paid The amount of currency settled
    function settleFor(address recipient) external payable returns (uint256 paid);
    /// @notice WARNING - Any currency that is cleared, will be non-retrievable, and locked in the contract permanently.
    /// A call to clear will zero out a positive balance WITHOUT a corresponding transfer.
    /// @dev This could be used to clear a balance that is considered dust.
    /// Additionally, the amount must be the exact positive balance. This is to enforce that the caller is aware of the amount being cleared.
    function clear(Currency currency, uint256 amount) external;
    /// @notice Called by the user to move value into ERC6909 balance
    /// @param to The address to mint the tokens to
    /// @param id The currency address to mint to ERC6909s, as a uint256
    /// @param amount The amount of currency to mint
    /// @dev The id is converted to a uint160 to correspond to a currency address
    /// If the upper 12 bytes are not 0, they will be 0-ed out
    function mint(address to, uint256 id, uint256 amount) external;
    /// @notice Called by the user to move value from ERC6909 balance
    /// @param from The address to burn the tokens from
    /// @param id The currency address to burn from ERC6909s, as a uint256
    /// @param amount The amount of currency to burn
    /// @dev The id is converted to a uint160 to correspond to a currency address
    /// If the upper 12 bytes are not 0, they will be 0-ed out
    function burn(address from, uint256 id, uint256 amount) external;
    /// @notice Updates the pools lp fees for the a pool that has enabled dynamic lp fees.
    /// @dev A swap fee totaling MAX_SWAP_FEE (100%) makes exact output swaps impossible since the input is entirely consumed by the fee
    /// @param key The key of the pool to update dynamic LP fees for
    /// @param newDynamicLPFee The new dynamic pool LP fee
    function updateDynamicLPFee(PoolKey memory key, uint24 newDynamicLPFee) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @notice Interface for the callback executed when an address unlocks the pool manager
interface IUnlockCallback {
    /// @notice Called by the pool manager on `msg.sender` when the manager is unlocked
    /// @param data The data that was passed to the call to unlock
    /// @return Any data that you want to be returned from the unlock call
    function unlockCallback(bytes calldata data) external returns (bytes memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {Currency} from "./types/Currency.sol";
import {CurrencyReserves} from "./libraries/CurrencyReserves.sol";
import {IProtocolFees} from "./interfaces/IProtocolFees.sol";
import {PoolKey} from "./types/PoolKey.sol";
import {ProtocolFeeLibrary} from "./libraries/ProtocolFeeLibrary.sol";
import {Owned} from "solmate/src/auth/Owned.sol";
import {PoolId} from "./types/PoolId.sol";
import {Pool} from "./libraries/Pool.sol";
import {CustomRevert} from "./libraries/CustomRevert.sol";
/// @notice Contract handling the setting and accrual of protocol fees
abstract contract ProtocolFees is IProtocolFees, Owned {
    using ProtocolFeeLibrary for uint24;
    using Pool for Pool.State;
    using CustomRevert for bytes4;
    /// @inheritdoc IProtocolFees
    mapping(Currency currency => uint256 amount) public protocolFeesAccrued;
    /// @inheritdoc IProtocolFees
    address public protocolFeeController;
    constructor(address initialOwner) Owned(initialOwner) {}
    /// @inheritdoc IProtocolFees
    function setProtocolFeeController(address controller) external onlyOwner {
        protocolFeeController = controller;
        emit ProtocolFeeControllerUpdated(controller);
    }
    /// @inheritdoc IProtocolFees
    function setProtocolFee(PoolKey memory key, uint24 newProtocolFee) external {
        if (msg.sender != protocolFeeController) InvalidCaller.selector.revertWith();
        if (!newProtocolFee.isValidProtocolFee()) ProtocolFeeTooLarge.selector.revertWith(newProtocolFee);
        PoolId id = key.toId();
        _getPool(id).setProtocolFee(newProtocolFee);
        emit ProtocolFeeUpdated(id, newProtocolFee);
    }
    /// @inheritdoc IProtocolFees
    function collectProtocolFees(address recipient, Currency currency, uint256 amount)
        external
        returns (uint256 amountCollected)
    {
        if (msg.sender != protocolFeeController) InvalidCaller.selector.revertWith();
        if (!currency.isAddressZero() && CurrencyReserves.getSyncedCurrency() == currency) {
            // prevent transfer between the sync and settle balanceOfs (native settle uses msg.value)
            ProtocolFeeCurrencySynced.selector.revertWith();
        }
        amountCollected = (amount == 0) ? protocolFeesAccrued[currency] : amount;
        protocolFeesAccrued[currency] -= amountCollected;
        currency.transfer(recipient, amountCollected);
    }
    /// @dev abstract internal function to allow the ProtocolFees contract to access the lock
    function _isUnlocked() internal virtual returns (bool);
    /// @dev abstract internal function to allow the ProtocolFees contract to access pool state
    /// @dev this is overridden in PoolManager.sol to give access to the _pools mapping
    function _getPool(PoolId id) internal virtual returns (Pool.State storage);
    function _updateProtocolFees(Currency currency, uint256 amount) internal {
        unchecked {
            protocolFeesAccrued[currency] += amount;
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {ERC6909} from "./ERC6909.sol";
/// @notice ERC6909Claims inherits ERC6909 and implements an internal burnFrom function
abstract contract ERC6909Claims is ERC6909 {
    /// @notice Burn `amount` tokens of token type `id` from `from`.
    /// @dev if sender is not `from` they must be an operator or have sufficient allowance.
    /// @param from The address to burn tokens from.
    /// @param id The currency to burn.
    /// @param amount The amount to burn.
    function _burnFrom(address from, uint256 id, uint256 amount) internal {
        address sender = msg.sender;
        if (from != sender && !isOperator[from][sender]) {
            uint256 senderAllowance = allowance[from][sender][id];
            if (senderAllowance != type(uint256).max) {
                allowance[from][sender][id] = senderAllowance - amount;
            }
        }
        _burn(from, id, amount);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {PoolKey} from "./PoolKey.sol";
type PoolId is bytes32;
/// @notice Library for computing the ID of a pool
library PoolIdLibrary {
    /// @notice Returns value equal to keccak256(abi.encode(poolKey))
    function toId(PoolKey memory poolKey) internal pure returns (PoolId poolId) {
        assembly ("memory-safe") {
            // 0xa0 represents the total size of the poolKey struct (5 slots of 32 bytes)
            poolId := keccak256(poolKey, 0xa0)
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {SafeCast} from "../libraries/SafeCast.sol";
/// @dev Two `int128` values packed into a single `int256` where the upper 128 bits represent the amount0
/// and the lower 128 bits represent the amount1.
type BalanceDelta is int256;
using {add as +, sub as -, eq as ==, neq as !=} for BalanceDelta global;
using BalanceDeltaLibrary for BalanceDelta global;
using SafeCast for int256;
function toBalanceDelta(int128 _amount0, int128 _amount1) pure returns (BalanceDelta balanceDelta) {
    assembly ("memory-safe") {
        balanceDelta := or(shl(128, _amount0), and(sub(shl(128, 1), 1), _amount1))
    }
}
function add(BalanceDelta a, BalanceDelta b) pure returns (BalanceDelta) {
    int256 res0;
    int256 res1;
    assembly ("memory-safe") {
        let a0 := sar(128, a)
        let a1 := signextend(15, a)
        let b0 := sar(128, b)
        let b1 := signextend(15, b)
        res0 := add(a0, b0)
        res1 := add(a1, b1)
    }
    return toBalanceDelta(res0.toInt128(), res1.toInt128());
}
function sub(BalanceDelta a, BalanceDelta b) pure returns (BalanceDelta) {
    int256 res0;
    int256 res1;
    assembly ("memory-safe") {
        let a0 := sar(128, a)
        let a1 := signextend(15, a)
        let b0 := sar(128, b)
        let b1 := signextend(15, b)
        res0 := sub(a0, b0)
        res1 := sub(a1, b1)
    }
    return toBalanceDelta(res0.toInt128(), res1.toInt128());
}
function eq(BalanceDelta a, BalanceDelta b) pure returns (bool) {
    return BalanceDelta.unwrap(a) == BalanceDelta.unwrap(b);
}
function neq(BalanceDelta a, BalanceDelta b) pure returns (bool) {
    return BalanceDelta.unwrap(a) != BalanceDelta.unwrap(b);
}
/// @notice Library for getting the amount0 and amount1 deltas from the BalanceDelta type
library BalanceDeltaLibrary {
    /// @notice A BalanceDelta of 0
    BalanceDelta public constant ZERO_DELTA = BalanceDelta.wrap(0);
    function amount0(BalanceDelta balanceDelta) internal pure returns (int128 _amount0) {
        assembly ("memory-safe") {
            _amount0 := sar(128, balanceDelta)
        }
    }
    function amount1(BalanceDelta balanceDelta) internal pure returns (int128 _amount1) {
        assembly ("memory-safe") {
            _amount1 := signextend(15, balanceDelta)
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
// Return type of the beforeSwap hook.
// Upper 128 bits is the delta in specified tokens. Lower 128 bits is delta in unspecified tokens (to match the afterSwap hook)
type BeforeSwapDelta is int256;
// Creates a BeforeSwapDelta from specified and unspecified
function toBeforeSwapDelta(int128 deltaSpecified, int128 deltaUnspecified)
    pure
    returns (BeforeSwapDelta beforeSwapDelta)
{
    assembly ("memory-safe") {
        beforeSwapDelta := or(shl(128, deltaSpecified), and(sub(shl(128, 1), 1), deltaUnspecified))
    }
}
/// @notice Library for getting the specified and unspecified deltas from the BeforeSwapDelta type
library BeforeSwapDeltaLibrary {
    /// @notice A BeforeSwapDelta of 0
    BeforeSwapDelta public constant ZERO_DELTA = BeforeSwapDelta.wrap(0);
    /// extracts int128 from the upper 128 bits of the BeforeSwapDelta
    /// returned by beforeSwap
    function getSpecifiedDelta(BeforeSwapDelta delta) internal pure returns (int128 deltaSpecified) {
        assembly ("memory-safe") {
            deltaSpecified := sar(128, delta)
        }
    }
    /// extracts int128 from the lower 128 bits of the BeforeSwapDelta
    /// returned by beforeSwap and afterSwap
    function getUnspecifiedDelta(BeforeSwapDelta delta) internal pure returns (int128 deltaUnspecified) {
        assembly ("memory-safe") {
            deltaUnspecified := signextend(15, delta)
        }
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.24;
/// @notice This is a temporary library that allows us to use transient storage (tstore/tload)
/// TODO: This library can be deleted when we have the transient keyword support in solidity.
library Lock {
    // The slot holding the unlocked state, transiently. bytes32(uint256(keccak256("Unlocked")) - 1)
    bytes32 internal constant IS_UNLOCKED_SLOT = 0xc090fc4683624cfc3884e9d8de5eca132f2d0ec062aff75d43c0465d5ceeab23;
    function unlock() internal {
        assembly ("memory-safe") {
            // unlock
            tstore(IS_UNLOCKED_SLOT, true)
        }
    }
    function lock() internal {
        assembly ("memory-safe") {
            tstore(IS_UNLOCKED_SLOT, false)
        }
    }
    function isUnlocked() internal view returns (bool unlocked) {
        assembly ("memory-safe") {
            unlocked := tload(IS_UNLOCKED_SLOT)
        }
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.24;
import {Currency} from "../types/Currency.sol";
/// @title a library to store callers' currency deltas in transient storage
/// @dev this library implements the equivalent of a mapping, as transient storage can only be accessed in assembly
library CurrencyDelta {
    /// @notice calculates which storage slot a delta should be stored in for a given account and currency
    function _computeSlot(address target, Currency currency) internal pure returns (bytes32 hashSlot) {
        assembly ("memory-safe") {
            mstore(0, and(target, 0xffffffffffffffffffffffffffffffffffffffff))
            mstore(32, and(currency, 0xffffffffffffffffffffffffffffffffffffffff))
            hashSlot := keccak256(0, 64)
        }
    }
    function getDelta(Currency currency, address target) internal view returns (int256 delta) {
        bytes32 hashSlot = _computeSlot(target, currency);
        assembly ("memory-safe") {
            delta := tload(hashSlot)
        }
    }
    /// @notice applies a new currency delta for a given account and currency
    /// @return previous The prior value
    /// @return next The modified result
    function applyDelta(Currency currency, address target, int128 delta)
        internal
        returns (int256 previous, int256 next)
    {
        bytes32 hashSlot = _computeSlot(target, currency);
        assembly ("memory-safe") {
            previous := tload(hashSlot)
        }
        next = previous + delta;
        assembly ("memory-safe") {
            tstore(hashSlot, next)
        }
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.24;
/// @notice This is a temporary library that allows us to use transient storage (tstore/tload)
/// for the nonzero delta count.
/// TODO: This library can be deleted when we have the transient keyword support in solidity.
library NonzeroDeltaCount {
    // The slot holding the number of nonzero deltas. bytes32(uint256(keccak256("NonzeroDeltaCount")) - 1)
    bytes32 internal constant NONZERO_DELTA_COUNT_SLOT =
        0x7d4b3164c6e45b97e7d87b7125a44c5828d005af88f9d751cfd78729c5d99a0b;
    function read() internal view returns (uint256 count) {
        assembly ("memory-safe") {
            count := tload(NONZERO_DELTA_COUNT_SLOT)
        }
    }
    function increment() internal {
        assembly ("memory-safe") {
            let count := tload(NONZERO_DELTA_COUNT_SLOT)
            count := add(count, 1)
            tstore(NONZERO_DELTA_COUNT_SLOT, count)
        }
    }
    /// @notice Potential to underflow. Ensure checks are performed by integrating contracts to ensure this does not happen.
    /// Current usage ensures this will not happen because we call decrement with known boundaries (only up to the number of times we call increment).
    function decrement() internal {
        assembly ("memory-safe") {
            let count := tload(NONZERO_DELTA_COUNT_SLOT)
            count := sub(count, 1)
            tstore(NONZERO_DELTA_COUNT_SLOT, count)
        }
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.24;
import {Currency} from "../types/Currency.sol";
import {CustomRevert} from "./CustomRevert.sol";
library CurrencyReserves {
    using CustomRevert for bytes4;
    /// bytes32(uint256(keccak256("ReservesOf")) - 1)
    bytes32 constant RESERVES_OF_SLOT = 0x1e0745a7db1623981f0b2a5d4232364c00787266eb75ad546f190e6cebe9bd95;
    /// bytes32(uint256(keccak256("Currency")) - 1)
    bytes32 constant CURRENCY_SLOT = 0x27e098c505d44ec3574004bca052aabf76bd35004c182099d8c575fb238593b9;
    function getSyncedCurrency() internal view returns (Currency currency) {
        assembly ("memory-safe") {
            currency := tload(CURRENCY_SLOT)
        }
    }
    function resetCurrency() internal {
        assembly ("memory-safe") {
            tstore(CURRENCY_SLOT, 0)
        }
    }
    function syncCurrencyAndReserves(Currency currency, uint256 value) internal {
        assembly ("memory-safe") {
            tstore(CURRENCY_SLOT, and(currency, 0xffffffffffffffffffffffffffffffffffffffff))
            tstore(RESERVES_OF_SLOT, value)
        }
    }
    function getSyncedReserves() internal view returns (uint256 value) {
        assembly ("memory-safe") {
            value := tload(RESERVES_OF_SLOT)
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {IExtsload} from "./interfaces/IExtsload.sol";
/// @notice Enables public storage access for efficient state retrieval by external contracts.
/// https://eips.ethereum.org/EIPS/eip-2330#rationale
abstract contract Extsload is IExtsload {
    /// @inheritdoc IExtsload
    function extsload(bytes32 slot) external view returns (bytes32) {
        assembly ("memory-safe") {
            mstore(0, sload(slot))
            return(0, 0x20)
        }
    }
    /// @inheritdoc IExtsload
    function extsload(bytes32 startSlot, uint256 nSlots) external view returns (bytes32[] memory) {
        assembly ("memory-safe") {
            let memptr := mload(0x40)
            let start := memptr
            // A left bit-shift of 5 is equivalent to multiplying by 32 but costs less gas.
            let length := shl(5, nSlots)
            // The abi offset of dynamic array in the returndata is 32.
            mstore(memptr, 0x20)
            // Store the length of the array returned
            mstore(add(memptr, 0x20), nSlots)
            // update memptr to the first location to hold a result
            memptr := add(memptr, 0x40)
            let end := add(memptr, length)
            for {} 1 {} {
                mstore(memptr, sload(startSlot))
                memptr := add(memptr, 0x20)
                startSlot := add(startSlot, 1)
                if iszero(lt(memptr, end)) { break }
            }
            return(start, sub(end, start))
        }
    }
    /// @inheritdoc IExtsload
    function extsload(bytes32[] calldata slots) external view returns (bytes32[] memory) {
        assembly ("memory-safe") {
            let memptr := mload(0x40)
            let start := memptr
            // for abi encoding the response - the array will be found at 0x20
            mstore(memptr, 0x20)
            // next we store the length of the return array
            mstore(add(memptr, 0x20), slots.length)
            // update memptr to the first location to hold an array entry
            memptr := add(memptr, 0x40)
            // A left bit-shift of 5 is equivalent to multiplying by 32 but costs less gas.
            let end := add(memptr, shl(5, slots.length))
            let calldataptr := slots.offset
            for {} 1 {} {
                mstore(memptr, sload(calldataload(calldataptr)))
                memptr := add(memptr, 0x20)
                calldataptr := add(calldataptr, 0x20)
                if iszero(lt(memptr, end)) { break }
            }
            return(start, sub(end, start))
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;
import {IExttload} from "./interfaces/IExttload.sol";
/// @notice Enables public transient storage access for efficient state retrieval by external contracts.
/// https://eips.ethereum.org/EIPS/eip-2330#rationale
abstract contract Exttload is IExttload {
    /// @inheritdoc IExttload
    function exttload(bytes32 slot) external view returns (bytes32) {
        assembly ("memory-safe") {
            mstore(0, tload(slot))
            return(0, 0x20)
        }
    }
    /// @inheritdoc IExttload
    function exttload(bytes32[] calldata slots) external view returns (bytes32[] memory) {
        assembly ("memory-safe") {
            let memptr := mload(0x40)
            let start := memptr
            // for abi encoding the response - the array will be found at 0x20
            mstore(memptr, 0x20)
            // next we store the length of the return array
            mstore(add(memptr, 0x20), slots.length)
            // update memptr to the first location to hold an array entry
            memptr := add(memptr, 0x40)
            // A left bit-shift of 5 is equivalent to multiplying by 32 but costs less gas.
            let end := add(memptr, shl(5, slots.length))
            let calldataptr := slots.offset
            for {} 1 {} {
                mstore(memptr, tload(calldataload(calldataptr)))
                memptr := add(memptr, 0x20)
                calldataptr := add(calldataptr, 0x20)
                if iszero(lt(memptr, end)) { break }
            }
            return(start, sub(end, start))
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title Library for reverting with custom errors efficiently
/// @notice Contains functions for reverting with custom errors with different argument types efficiently
/// @dev To use this library, declare `using CustomRevert for bytes4;` and replace `revert CustomError()` with
/// `CustomError.selector.revertWith()`
/// @dev The functions may tamper with the free memory pointer but it is fine since the call context is exited immediately
library CustomRevert {
    /// @dev ERC-7751 error for wrapping bubbled up reverts
    error WrappedError(address target, bytes4 selector, bytes reason, bytes details);
    /// @dev Reverts with the selector of a custom error in the scratch space
    function revertWith(bytes4 selector) internal pure {
        assembly ("memory-safe") {
            mstore(0, selector)
            revert(0, 0x04)
        }
    }
    /// @dev Reverts with a custom error with an address argument in the scratch space
    function revertWith(bytes4 selector, address addr) internal pure {
        assembly ("memory-safe") {
            mstore(0, selector)
            mstore(0x04, and(addr, 0xffffffffffffffffffffffffffffffffffffffff))
            revert(0, 0x24)
        }
    }
    /// @dev Reverts with a custom error with an int24 argument in the scratch space
    function revertWith(bytes4 selector, int24 value) internal pure {
        assembly ("memory-safe") {
            mstore(0, selector)
            mstore(0x04, signextend(2, value))
            revert(0, 0x24)
        }
    }
    /// @dev Reverts with a custom error with a uint160 argument in the scratch space
    function revertWith(bytes4 selector, uint160 value) internal pure {
        assembly ("memory-safe") {
            mstore(0, selector)
            mstore(0x04, and(value, 0xffffffffffffffffffffffffffffffffffffffff))
            revert(0, 0x24)
        }
    }
    /// @dev Reverts with a custom error with two int24 arguments
    function revertWith(bytes4 selector, int24 value1, int24 value2) internal pure {
        assembly ("memory-safe") {
            let fmp := mload(0x40)
            mstore(fmp, selector)
            mstore(add(fmp, 0x04), signextend(2, value1))
            mstore(add(fmp, 0x24), signextend(2, value2))
            revert(fmp, 0x44)
        }
    }
    /// @dev Reverts with a custom error with two uint160 arguments
    function revertWith(bytes4 selector, uint160 value1, uint160 value2) internal pure {
        assembly ("memory-safe") {
            let fmp := mload(0x40)
            mstore(fmp, selector)
            mstore(add(fmp, 0x04), and(value1, 0xffffffffffffffffffffffffffffffffffffffff))
            mstore(add(fmp, 0x24), and(value2, 0xffffffffffffffffffffffffffffffffffffffff))
            revert(fmp, 0x44)
        }
    }
    /// @dev Reverts with a custom error with two address arguments
    function revertWith(bytes4 selector, address value1, address value2) internal pure {
        assembly ("memory-safe") {
            let fmp := mload(0x40)
            mstore(fmp, selector)
            mstore(add(fmp, 0x04), and(value1, 0xffffffffffffffffffffffffffffffffffffffff))
            mstore(add(fmp, 0x24), and(value2, 0xffffffffffffffffffffffffffffffffffffffff))
            revert(fmp, 0x44)
        }
    }
    /// @notice bubble up the revert message returned by a call and revert with a wrapped ERC-7751 error
    /// @dev this method can be vulnerable to revert data bombs
    function bubbleUpAndRevertWith(
        address revertingContract,
        bytes4 revertingFunctionSelector,
        bytes4 additionalContext
    ) internal pure {
        bytes4 wrappedErrorSelector = WrappedError.selector;
        assembly ("memory-safe") {
            // Ensure the size of the revert data is a multiple of 32 bytes
            let encodedDataSize := mul(div(add(returndatasize(), 31), 32), 32)
            let fmp := mload(0x40)
            // Encode wrapped error selector, address, function selector, offset, additional context, size, revert reason
            mstore(fmp, wrappedErrorSelector)
            mstore(add(fmp, 0x04), and(revertingContract, 0xffffffffffffffffffffffffffffffffffffffff))
            mstore(
                add(fmp, 0x24),
                and(revertingFunctionSelector, 0xffffffff00000000000000000000000000000000000000000000000000000000)
            )
            // offset revert reason
            mstore(add(fmp, 0x44), 0x80)
            // offset additional context
            mstore(add(fmp, 0x64), add(0xa0, encodedDataSize))
            // size revert reason
            mstore(add(fmp, 0x84), returndatasize())
            // revert reason
            returndatacopy(add(fmp, 0xa4), 0, returndatasize())
            // size additional context
            mstore(add(fmp, add(0xa4, encodedDataSize)), 0x04)
            // additional context
            mstore(
                add(fmp, add(0xc4, encodedDataSize)),
                and(additionalContext, 0xffffffff00000000000000000000000000000000000000000000000000000000)
            )
            revert(fmp, add(0xe4, encodedDataSize))
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @notice Parses bytes returned from hooks and the byte selector used to check return selectors from hooks.
/// @dev parseSelector also is used to parse the expected selector
/// For parsing hook returns, note that all hooks return either bytes4 or (bytes4, 32-byte-delta) or (bytes4, 32-byte-delta, uint24).
library ParseBytes {
    function parseSelector(bytes memory result) internal pure returns (bytes4 selector) {
        // equivalent: (selector,) = abi.decode(result, (bytes4, int256));
        assembly ("memory-safe") {
            selector := mload(add(result, 0x20))
        }
    }
    function parseFee(bytes memory result) internal pure returns (uint24 lpFee) {
        // equivalent: (,, lpFee) = abi.decode(result, (bytes4, int256, uint24));
        assembly ("memory-safe") {
            lpFee := mload(add(result, 0x60))
        }
    }
    function parseReturnDelta(bytes memory result) internal pure returns (int256 hookReturn) {
        // equivalent: (, hookReturnDelta) = abi.decode(result, (bytes4, int256));
        assembly ("memory-safe") {
            hookReturn := mload(add(result, 0x40))
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {BitMath} from "./BitMath.sol";
/// @title Packed tick initialized state library
/// @notice Stores a packed mapping of tick index to its initialized state
/// @dev The mapping uses int16 for keys since ticks are represented as int24 and there are 256 (2^8) values per word.
library TickBitmap {
    /// @notice Thrown when the tick is not enumerated by the tick spacing
    /// @param tick the invalid tick
    /// @param tickSpacing The tick spacing of the pool
    error TickMisaligned(int24 tick, int24 tickSpacing);
    /// @dev round towards negative infinity
    function compress(int24 tick, int24 tickSpacing) internal pure returns (int24 compressed) {
        // compressed = tick / tickSpacing;
        // if (tick < 0 && tick % tickSpacing != 0) compressed--;
        assembly ("memory-safe") {
            tick := signextend(2, tick)
            tickSpacing := signextend(2, tickSpacing)
            compressed :=
                sub(
                    sdiv(tick, tickSpacing),
                    // if (tick < 0 && tick % tickSpacing != 0) then tick % tickSpacing < 0, vice versa
                    slt(smod(tick, tickSpacing), 0)
                )
        }
    }
    /// @notice Computes the position in the mapping where the initialized bit for a tick lives
    /// @param tick The tick for which to compute the position
    /// @return wordPos The key in the mapping containing the word in which the bit is stored
    /// @return bitPos The bit position in the word where the flag is stored
    function position(int24 tick) internal pure returns (int16 wordPos, uint8 bitPos) {
        assembly ("memory-safe") {
            // signed arithmetic shift right
            wordPos := sar(8, signextend(2, tick))
            bitPos := and(tick, 0xff)
        }
    }
    /// @notice Flips the initialized state for a given tick from false to true, or vice versa
    /// @param self The mapping in which to flip the tick
    /// @param tick The tick to flip
    /// @param tickSpacing The spacing between usable ticks
    function flipTick(mapping(int16 => uint256) storage self, int24 tick, int24 tickSpacing) internal {
        // Equivalent to the following Solidity:
        //     if (tick % tickSpacing != 0) revert TickMisaligned(tick, tickSpacing);
        //     (int16 wordPos, uint8 bitPos) = position(tick / tickSpacing);
        //     uint256 mask = 1 << bitPos;
        //     self[wordPos] ^= mask;
        assembly ("memory-safe") {
            tick := signextend(2, tick)
            tickSpacing := signextend(2, tickSpacing)
            // ensure that the tick is spaced
            if smod(tick, tickSpacing) {
                let fmp := mload(0x40)
                mstore(fmp, 0xd4d8f3e6) // selector for TickMisaligned(int24,int24)
                mstore(add(fmp, 0x20), tick)
                mstore(add(fmp, 0x40), tickSpacing)
                revert(add(fmp, 0x1c), 0x44)
            }
            tick := sdiv(tick, tickSpacing)
            // calculate the storage slot corresponding to the tick
            // wordPos = tick >> 8
            mstore(0, sar(8, tick))
            mstore(0x20, self.slot)
            // the slot of self[wordPos] is keccak256(abi.encode(wordPos, self.slot))
            let slot := keccak256(0, 0x40)
            // mask = 1 << bitPos = 1 << (tick % 256)
            // self[wordPos] ^= mask
            sstore(slot, xor(sload(slot), shl(and(tick, 0xff), 1)))
        }
    }
    /// @notice Returns the next initialized tick contained in the same word (or adjacent word) as the tick that is either
    /// to the left (less than or equal to) or right (greater than) of the given tick
    /// @param self The mapping in which to compute the next initialized tick
    /// @param tick The starting tick
    /// @param tickSpacing The spacing between usable ticks
    /// @param lte Whether to search for the next initialized tick to the left (less than or equal to the starting tick)
    /// @return next The next initialized or uninitialized tick up to 256 ticks away from the current tick
    /// @return initialized Whether the next tick is initialized, as the function only searches within up to 256 ticks
    function nextInitializedTickWithinOneWord(
        mapping(int16 => uint256) storage self,
        int24 tick,
        int24 tickSpacing,
        bool lte
    ) internal view returns (int24 next, bool initialized) {
        unchecked {
            int24 compressed = compress(tick, tickSpacing);
            if (lte) {
                (int16 wordPos, uint8 bitPos) = position(compressed);
                // all the 1s at or to the right of the current bitPos
                uint256 mask = type(uint256).max >> (uint256(type(uint8).max) - bitPos);
                uint256 masked = self[wordPos] & mask;
                // if there are no initialized ticks to the right of or at the current tick, return rightmost in the word
                initialized = masked != 0;
                // overflow/underflow is possible, but prevented externally by limiting both tickSpacing and tick
                next = initialized
                    ? (compressed - int24(uint24(bitPos - BitMath.mostSignificantBit(masked)))) * tickSpacing
                    : (compressed - int24(uint24(bitPos))) * tickSpacing;
            } else {
                // start from the word of the next tick, since the current tick state doesn't matter
                (int16 wordPos, uint8 bitPos) = position(++compressed);
                // all the 1s at or to the left of the bitPos
                uint256 mask = ~((1 << bitPos) - 1);
                uint256 masked = self[wordPos] & mask;
                // if there are no initialized ticks to the left of the current tick, return leftmost in the word
                initialized = masked != 0;
                // overflow/underflow is possible, but prevented externally by limiting both tickSpacing and tick
                next = initialized
                    ? (compressed + int24(uint24(BitMath.leastSignificantBit(masked) - bitPos))) * tickSpacing
                    : (compressed + int24(uint24(type(uint8).max - bitPos))) * tickSpacing;
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title Math functions that do not check inputs or outputs
/// @notice Contains methods that perform common math functions but do not do any overflow or underflow checks
library UnsafeMath {
    /// @notice Returns ceil(x / y)
    /// @dev division by 0 will return 0, and should be checked externally
    /// @param x The dividend
    /// @param y The divisor
    /// @return z The quotient, ceil(x / y)
    function divRoundingUp(uint256 x, uint256 y) internal pure returns (uint256 z) {
        assembly ("memory-safe") {
            z := add(div(x, y), gt(mod(x, y), 0))
        }
    }
    /// @notice Calculates floor(a×b÷denominator)
    /// @dev division by 0 will return 0, and should be checked externally
    /// @param a The multiplicand
    /// @param b The multiplier
    /// @param denominator The divisor
    /// @return result The 256-bit result, floor(a×b÷denominator)
    function simpleMulDiv(uint256 a, uint256 b, uint256 denominator) internal pure returns (uint256 result) {
        assembly ("memory-safe") {
            result := div(mul(a, b), denominator)
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title FixedPoint128
/// @notice A library for handling binary fixed point numbers, see https://en.wikipedia.org/wiki/Q_(number_format)
library FixedPoint128 {
    uint256 internal constant Q128 = 0x100000000000000000000000000000000;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {SafeCast} from "./SafeCast.sol";
import {FullMath} from "./FullMath.sol";
import {UnsafeMath} from "./UnsafeMath.sol";
import {FixedPoint96} from "./FixedPoint96.sol";
/// @title Functions based on Q64.96 sqrt price and liquidity
/// @notice Contains the math that uses square root of price as a Q64.96 and liquidity to compute deltas
library SqrtPriceMath {
    using SafeCast for uint256;
    error InvalidPriceOrLiquidity();
    error InvalidPrice();
    error NotEnoughLiquidity();
    error PriceOverflow();
    /// @notice Gets the next sqrt price given a delta of currency0
    /// @dev Always rounds up, because in the exact output case (increasing price) we need to move the price at least
    /// far enough to get the desired output amount, and in the exact input case (decreasing price) we need to move the
    /// price less in order to not send too much output.
    /// The most precise formula for this is liquidity * sqrtPX96 / (liquidity +- amount * sqrtPX96),
    /// if this is impossible because of overflow, we calculate liquidity / (liquidity / sqrtPX96 +- amount).
    /// @param sqrtPX96 The starting price, i.e. before accounting for the currency0 delta
    /// @param liquidity The amount of usable liquidity
    /// @param amount How much of currency0 to add or remove from virtual reserves
    /// @param add Whether to add or remove the amount of currency0
    /// @return The price after adding or removing amount, depending on add
    function getNextSqrtPriceFromAmount0RoundingUp(uint160 sqrtPX96, uint128 liquidity, uint256 amount, bool add)
        internal
        pure
        returns (uint160)
    {
        // we short circuit amount == 0 because the result is otherwise not guaranteed to equal the input price
        if (amount == 0) return sqrtPX96;
        uint256 numerator1 = uint256(liquidity) << FixedPoint96.RESOLUTION;
        if (add) {
            unchecked {
                uint256 product = amount * sqrtPX96;
                if (product / amount == sqrtPX96) {
                    uint256 denominator = numerator1 + product;
                    if (denominator >= numerator1) {
                        // always fits in 160 bits
                        return uint160(FullMath.mulDivRoundingUp(numerator1, sqrtPX96, denominator));
                    }
                }
            }
            // denominator is checked for overflow
            return uint160(UnsafeMath.divRoundingUp(numerator1, (numerator1 / sqrtPX96) + amount));
        } else {
            unchecked {
                uint256 product = amount * sqrtPX96;
                // if the product overflows, we know the denominator underflows
                // in addition, we must check that the denominator does not underflow
                // equivalent: if (product / amount != sqrtPX96 || numerator1 <= product) revert PriceOverflow();
                assembly ("memory-safe") {
                    if iszero(
                        and(
                            eq(div(product, amount), and(sqrtPX96, 0xffffffffffffffffffffffffffffffffffffffff)),
                            gt(numerator1, product)
                        )
                    ) {
                        mstore(0, 0xf5c787f1) // selector for PriceOverflow()
                        revert(0x1c, 0x04)
                    }
                }
                uint256 denominator = numerator1 - product;
                return FullMath.mulDivRoundingUp(numerator1, sqrtPX96, denominator).toUint160();
            }
        }
    }
    /// @notice Gets the next sqrt price given a delta of currency1
    /// @dev Always rounds down, because in the exact output case (decreasing price) we need to move the price at least
    /// far enough to get the desired output amount, and in the exact input case (increasing price) we need to move the
    /// price less in order to not send too much output.
    /// The formula we compute is within <1 wei of the lossless version: sqrtPX96 +- amount / liquidity
    /// @param sqrtPX96 The starting price, i.e., before accounting for the currency1 delta
    /// @param liquidity The amount of usable liquidity
    /// @param amount How much of currency1 to add, or remove, from virtual reserves
    /// @param add Whether to add, or remove, the amount of currency1
    /// @return The price after adding or removing `amount`
    function getNextSqrtPriceFromAmount1RoundingDown(uint160 sqrtPX96, uint128 liquidity, uint256 amount, bool add)
        internal
        pure
        returns (uint160)
    {
        // if we're adding (subtracting), rounding down requires rounding the quotient down (up)
        // in both cases, avoid a mulDiv for most inputs
        if (add) {
            uint256 quotient = (
                amount <= type(uint160).max
                    ? (amount << FixedPoint96.RESOLUTION) / liquidity
                    : FullMath.mulDiv(amount, FixedPoint96.Q96, liquidity)
            );
            return (uint256(sqrtPX96) + quotient).toUint160();
        } else {
            uint256 quotient = (
                amount <= type(uint160).max
                    ? UnsafeMath.divRoundingUp(amount << FixedPoint96.RESOLUTION, liquidity)
                    : FullMath.mulDivRoundingUp(amount, FixedPoint96.Q96, liquidity)
            );
            // equivalent: if (sqrtPX96 <= quotient) revert NotEnoughLiquidity();
            assembly ("memory-safe") {
                if iszero(gt(and(sqrtPX96, 0xffffffffffffffffffffffffffffffffffffffff), quotient)) {
                    mstore(0, 0x4323a555) // selector for NotEnoughLiquidity()
                    revert(0x1c, 0x04)
                }
            }
            // always fits 160 bits
            unchecked {
                return uint160(sqrtPX96 - quotient);
            }
        }
    }
    /// @notice Gets the next sqrt price given an input amount of currency0 or currency1
    /// @dev Throws if price or liquidity are 0, or if the next price is out of bounds
    /// @param sqrtPX96 The starting price, i.e., before accounting for the input amount
    /// @param liquidity The amount of usable liquidity
    /// @param amountIn How much of currency0, or currency1, is being swapped in
    /// @param zeroForOne Whether the amount in is currency0 or currency1
    /// @return uint160 The price after adding the input amount to currency0 or currency1
    function getNextSqrtPriceFromInput(uint160 sqrtPX96, uint128 liquidity, uint256 amountIn, bool zeroForOne)
        internal
        pure
        returns (uint160)
    {
        // equivalent: if (sqrtPX96 == 0 || liquidity == 0) revert InvalidPriceOrLiquidity();
        assembly ("memory-safe") {
            if or(
                iszero(and(sqrtPX96, 0xffffffffffffffffffffffffffffffffffffffff)),
                iszero(and(liquidity, 0xffffffffffffffffffffffffffffffff))
            ) {
                mstore(0, 0x4f2461b8) // selector for InvalidPriceOrLiquidity()
                revert(0x1c, 0x04)
            }
        }
        // round to make sure that we don't pass the target price
        return zeroForOne
            ? getNextSqrtPriceFromAmount0RoundingUp(sqrtPX96, liquidity, amountIn, true)
            : getNextSqrtPriceFromAmount1RoundingDown(sqrtPX96, liquidity, amountIn, true);
    }
    /// @notice Gets the next sqrt price given an output amount of currency0 or currency1
    /// @dev Throws if price or liquidity are 0 or the next price is out of bounds
    /// @param sqrtPX96 The starting price before accounting for the output amount
    /// @param liquidity The amount of usable liquidity
    /// @param amountOut How much of currency0, or currency1, is being swapped out
    /// @param zeroForOne Whether the amount out is currency1 or currency0
    /// @return uint160 The price after removing the output amount of currency0 or currency1
    function getNextSqrtPriceFromOutput(uint160 sqrtPX96, uint128 liquidity, uint256 amountOut, bool zeroForOne)
        internal
        pure
        returns (uint160)
    {
        // equivalent: if (sqrtPX96 == 0 || liquidity == 0) revert InvalidPriceOrLiquidity();
        assembly ("memory-safe") {
            if or(
                iszero(and(sqrtPX96, 0xffffffffffffffffffffffffffffffffffffffff)),
                iszero(and(liquidity, 0xffffffffffffffffffffffffffffffff))
            ) {
                mstore(0, 0x4f2461b8) // selector for InvalidPriceOrLiquidity()
                revert(0x1c, 0x04)
            }
        }
        // round to make sure that we pass the target price
        return zeroForOne
            ? getNextSqrtPriceFromAmount1RoundingDown(sqrtPX96, liquidity, amountOut, false)
            : getNextSqrtPriceFromAmount0RoundingUp(sqrtPX96, liquidity, amountOut, false);
    }
    /// @notice Gets the amount0 delta between two prices
    /// @dev Calculates liquidity / sqrt(lower) - liquidity / sqrt(upper),
    /// i.e. liquidity * (sqrt(upper) - sqrt(lower)) / (sqrt(upper) * sqrt(lower))
    /// @param sqrtPriceAX96 A sqrt price
    /// @param sqrtPriceBX96 Another sqrt price
    /// @param liquidity The amount of usable liquidity
    /// @param roundUp Whether to round the amount up or down
    /// @return uint256 Amount of currency0 required to cover a position of size liquidity between the two passed prices
    function getAmount0Delta(uint160 sqrtPriceAX96, uint160 sqrtPriceBX96, uint128 liquidity, bool roundUp)
        internal
        pure
        returns (uint256)
    {
        unchecked {
            if (sqrtPriceAX96 > sqrtPriceBX96) (sqrtPriceAX96, sqrtPriceBX96) = (sqrtPriceBX96, sqrtPriceAX96);
            // equivalent: if (sqrtPriceAX96 == 0) revert InvalidPrice();
            assembly ("memory-safe") {
                if iszero(and(sqrtPriceAX96, 0xffffffffffffffffffffffffffffffffffffffff)) {
                    mstore(0, 0x00bfc921) // selector for InvalidPrice()
                    revert(0x1c, 0x04)
                }
            }
            uint256 numerator1 = uint256(liquidity) << FixedPoint96.RESOLUTION;
            uint256 numerator2 = sqrtPriceBX96 - sqrtPriceAX96;
            return roundUp
                ? UnsafeMath.divRoundingUp(FullMath.mulDivRoundingUp(numerator1, numerator2, sqrtPriceBX96), sqrtPriceAX96)
                : FullMath.mulDiv(numerator1, numerator2, sqrtPriceBX96) / sqrtPriceAX96;
        }
    }
    /// @notice Equivalent to: `a >= b ? a - b : b - a`
    function absDiff(uint160 a, uint160 b) internal pure returns (uint256 res) {
        assembly ("memory-safe") {
            let diff :=
                sub(and(a, 0xffffffffffffffffffffffffffffffffffffffff), and(b, 0xffffffffffffffffffffffffffffffffffffffff))
            // mask = 0 if a >= b else -1 (all 1s)
            let mask := sar(255, diff)
            // if a >= b, res = a - b = 0 ^ (a - b)
            // if a < b, res = b - a = ~~(b - a) = ~(-(b - a) - 1) = ~(a - b - 1) = (-1) ^ (a - b - 1)
            // either way, res = mask ^ (a - b + mask)
            res := xor(mask, add(mask, diff))
        }
    }
    /// @notice Gets the amount1 delta between two prices
    /// @dev Calculates liquidity * (sqrt(upper) - sqrt(lower))
    /// @param sqrtPriceAX96 A sqrt price
    /// @param sqrtPriceBX96 Another sqrt price
    /// @param liquidity The amount of usable liquidity
    /// @param roundUp Whether to round the amount up, or down
    /// @return amount1 Amount of currency1 required to cover a position of size liquidity between the two passed prices
    function getAmount1Delta(uint160 sqrtPriceAX96, uint160 sqrtPriceBX96, uint128 liquidity, bool roundUp)
        internal
        pure
        returns (uint256 amount1)
    {
        uint256 numerator = absDiff(sqrtPriceAX96, sqrtPriceBX96);
        uint256 denominator = FixedPoint96.Q96;
        uint256 _liquidity = uint256(liquidity);
        /**
         * Equivalent to:
         *   amount1 = roundUp
         *       ? FullMath.mulDivRoundingUp(liquidity, sqrtPriceBX96 - sqrtPriceAX96, FixedPoint96.Q96)
         *       : FullMath.mulDiv(liquidity, sqrtPriceBX96 - sqrtPriceAX96, FixedPoint96.Q96);
         * Cannot overflow because `type(uint128).max * type(uint160).max >> 96 < (1 << 192)`.
         */
        amount1 = FullMath.mulDiv(_liquidity, numerator, denominator);
        assembly ("memory-safe") {
            amount1 := add(amount1, and(gt(mulmod(_liquidity, numerator, denominator), 0), roundUp))
        }
    }
    /// @notice Helper that gets signed currency0 delta
    /// @param sqrtPriceAX96 A sqrt price
    /// @param sqrtPriceBX96 Another sqrt price
    /// @param liquidity The change in liquidity for which to compute the amount0 delta
    /// @return int256 Amount of currency0 corresponding to the passed liquidityDelta between the two prices
    function getAmount0Delta(uint160 sqrtPriceAX96, uint160 sqrtPriceBX96, int128 liquidity)
        internal
        pure
        returns (int256)
    {
        unchecked {
            return liquidity < 0
                ? getAmount0Delta(sqrtPriceAX96, sqrtPriceBX96, uint128(-liquidity), false).toInt256()
                : -getAmount0Delta(sqrtPriceAX96, sqrtPriceBX96, uint128(liquidity), true).toInt256();
        }
    }
    /// @notice Helper that gets signed currency1 delta
    /// @param sqrtPriceAX96 A sqrt price
    /// @param sqrtPriceBX96 Another sqrt price
    /// @param liquidity The change in liquidity for which to compute the amount1 delta
    /// @return int256 Amount of currency1 corresponding to the passed liquidityDelta between the two prices
    function getAmount1Delta(uint160 sqrtPriceAX96, uint160 sqrtPriceBX96, int128 liquidity)
        internal
        pure
        returns (int256)
    {
        unchecked {
            return liquidity < 0
                ? getAmount1Delta(sqrtPriceAX96, sqrtPriceBX96, uint128(-liquidity), false).toInt256()
                : -getAmount1Delta(sqrtPriceAX96, sqrtPriceBX96, uint128(liquidity), true).toInt256();
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {FullMath} from "./FullMath.sol";
import {SqrtPriceMath} from "./SqrtPriceMath.sol";
/// @title Computes the result of a swap within ticks
/// @notice Contains methods for computing the result of a swap within a single tick price range, i.e., a single tick.
library SwapMath {
    /// @notice the swap fee is represented in hundredths of a bip, so the max is 100%
    /// @dev the swap fee is the total fee on a swap, including both LP and Protocol fee
    uint256 internal constant MAX_SWAP_FEE = 1e6;
    /// @notice Computes the sqrt price target for the next swap step
    /// @param zeroForOne The direction of the swap, true for currency0 to currency1, false for currency1 to currency0
    /// @param sqrtPriceNextX96 The Q64.96 sqrt price for the next initialized tick
    /// @param sqrtPriceLimitX96 The Q64.96 sqrt price limit. If zero for one, the price cannot be less than this value
    /// after the swap. If one for zero, the price cannot be greater than this value after the swap
    /// @return sqrtPriceTargetX96 The price target for the next swap step
    function getSqrtPriceTarget(bool zeroForOne, uint160 sqrtPriceNextX96, uint160 sqrtPriceLimitX96)
        internal
        pure
        returns (uint160 sqrtPriceTargetX96)
    {
        assembly ("memory-safe") {
            // a flag to toggle between sqrtPriceNextX96 and sqrtPriceLimitX96
            // when zeroForOne == true, nextOrLimit reduces to sqrtPriceNextX96 >= sqrtPriceLimitX96
            // sqrtPriceTargetX96 = max(sqrtPriceNextX96, sqrtPriceLimitX96)
            // when zeroForOne == false, nextOrLimit reduces to sqrtPriceNextX96 < sqrtPriceLimitX96
            // sqrtPriceTargetX96 = min(sqrtPriceNextX96, sqrtPriceLimitX96)
            sqrtPriceNextX96 := and(sqrtPriceNextX96, 0xffffffffffffffffffffffffffffffffffffffff)
            sqrtPriceLimitX96 := and(sqrtPriceLimitX96, 0xffffffffffffffffffffffffffffffffffffffff)
            let nextOrLimit := xor(lt(sqrtPriceNextX96, sqrtPriceLimitX96), and(zeroForOne, 0x1))
            let symDiff := xor(sqrtPriceNextX96, sqrtPriceLimitX96)
            sqrtPriceTargetX96 := xor(sqrtPriceLimitX96, mul(symDiff, nextOrLimit))
        }
    }
    /// @notice Computes the result of swapping some amount in, or amount out, given the parameters of the swap
    /// @dev If the swap's amountSpecified is negative, the combined fee and input amount will never exceed the absolute value of the remaining amount.
    /// @param sqrtPriceCurrentX96 The current sqrt price of the pool
    /// @param sqrtPriceTargetX96 The price that cannot be exceeded, from which the direction of the swap is inferred
    /// @param liquidity The usable liquidity
    /// @param amountRemaining How much input or output amount is remaining to be swapped in/out
    /// @param feePips The fee taken from the input amount, expressed in hundredths of a bip
    /// @return sqrtPriceNextX96 The price after swapping the amount in/out, not to exceed the price target
    /// @return amountIn The amount to be swapped in, of either currency0 or currency1, based on the direction of the swap
    /// @return amountOut The amount to be received, of either currency0 or currency1, based on the direction of the swap
    /// @return feeAmount The amount of input that will be taken as a fee
    /// @dev feePips must be no larger than MAX_SWAP_FEE for this function. We ensure that before setting a fee using LPFeeLibrary.isValid.
    function computeSwapStep(
        uint160 sqrtPriceCurrentX96,
        uint160 sqrtPriceTargetX96,
        uint128 liquidity,
        int256 amountRemaining,
        uint24 feePips
    ) internal pure returns (uint160 sqrtPriceNextX96, uint256 amountIn, uint256 amountOut, uint256 feeAmount) {
        unchecked {
            uint256 _feePips = feePips; // upcast once and cache
            bool zeroForOne = sqrtPriceCurrentX96 >= sqrtPriceTargetX96;
            bool exactIn = amountRemaining < 0;
            if (exactIn) {
                uint256 amountRemainingLessFee =
                    FullMath.mulDiv(uint256(-amountRemaining), MAX_SWAP_FEE - _feePips, MAX_SWAP_FEE);
                amountIn = zeroForOne
                    ? SqrtPriceMath.getAmount0Delta(sqrtPriceTargetX96, sqrtPriceCurrentX96, liquidity, true)
                    : SqrtPriceMath.getAmount1Delta(sqrtPriceCurrentX96, sqrtPriceTargetX96, liquidity, true);
                if (amountRemainingLessFee >= amountIn) {
                    // `amountIn` is capped by the target price
                    sqrtPriceNextX96 = sqrtPriceTargetX96;
                    feeAmount = _feePips == MAX_SWAP_FEE
                        ? amountIn // amountIn is always 0 here, as amountRemainingLessFee == 0 and amountRemainingLessFee >= amountIn
                        : FullMath.mulDivRoundingUp(amountIn, _feePips, MAX_SWAP_FEE - _feePips);
                } else {
                    // exhaust the remaining amount
                    amountIn = amountRemainingLessFee;
                    sqrtPriceNextX96 = SqrtPriceMath.getNextSqrtPriceFromInput(
                        sqrtPriceCurrentX96, liquidity, amountRemainingLessFee, zeroForOne
                    );
                    // we didn't reach the target, so take the remainder of the maximum input as fee
                    feeAmount = uint256(-amountRemaining) - amountIn;
                }
                amountOut = zeroForOne
                    ? SqrtPriceMath.getAmount1Delta(sqrtPriceNextX96, sqrtPriceCurrentX96, liquidity, false)
                    : SqrtPriceMath.getAmount0Delta(sqrtPriceCurrentX96, sqrtPriceNextX96, liquidity, false);
            } else {
                amountOut = zeroForOne
                    ? SqrtPriceMath.getAmount1Delta(sqrtPriceTargetX96, sqrtPriceCurrentX96, liquidity, false)
                    : SqrtPriceMath.getAmount0Delta(sqrtPriceCurrentX96, sqrtPriceTargetX96, liquidity, false);
                if (uint256(amountRemaining) >= amountOut) {
                    // `amountOut` is capped by the target price
                    sqrtPriceNextX96 = sqrtPriceTargetX96;
                } else {
                    // cap the output amount to not exceed the remaining output amount
                    amountOut = uint256(amountRemaining);
                    sqrtPriceNextX96 =
                        SqrtPriceMath.getNextSqrtPriceFromOutput(sqrtPriceCurrentX96, liquidity, amountOut, zeroForOne);
                }
                amountIn = zeroForOne
                    ? SqrtPriceMath.getAmount0Delta(sqrtPriceNextX96, sqrtPriceCurrentX96, liquidity, true)
                    : SqrtPriceMath.getAmount1Delta(sqrtPriceCurrentX96, sqrtPriceNextX96, liquidity, true);
                // `feePips` cannot be `MAX_SWAP_FEE` for exact out
                feeAmount = FullMath.mulDivRoundingUp(amountIn, _feePips, MAX_SWAP_FEE - _feePips);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @dev Slot0 is a packed version of solidity structure.
 * Using the packaged version saves gas by not storing the structure fields in memory slots.
 *
 * Layout:
 * 24 bits empty | 24 bits lpFee | 12 bits protocolFee 1->0 | 12 bits protocolFee 0->1 | 24 bits tick | 160 bits sqrtPriceX96
 *
 * Fields in the direction from the least significant bit:
 *
 * The current price
 * uint160 sqrtPriceX96;
 *
 * The current tick
 * int24 tick;
 *
 * Protocol fee, expressed in hundredths of a bip, upper 12 bits are for 1->0, and the lower 12 are for 0->1
 * the maximum is 1000 - meaning the maximum protocol fee is 0.1%
 * the protocolFee is taken from the input first, then the lpFee is taken from the remaining input
 * uint24 protocolFee;
 *
 * The current LP fee of the pool. If the pool is dynamic, this does not include the dynamic fee flag.
 * uint24 lpFee;
 */
type Slot0 is bytes32;
using Slot0Library for Slot0 global;
/// @notice Library for getting and setting values in the Slot0 type
library Slot0Library {
    uint160 internal constant MASK_160_BITS = 0x00FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF;
    uint24 internal constant MASK_24_BITS = 0xFFFFFF;
    uint8 internal constant TICK_OFFSET = 160;
    uint8 internal constant PROTOCOL_FEE_OFFSET = 184;
    uint8 internal constant LP_FEE_OFFSET = 208;
    // #### GETTERS ####
    function sqrtPriceX96(Slot0 _packed) internal pure returns (uint160 _sqrtPriceX96) {
        assembly ("memory-safe") {
            _sqrtPriceX96 := and(MASK_160_BITS, _packed)
        }
    }
    function tick(Slot0 _packed) internal pure returns (int24 _tick) {
        assembly ("memory-safe") {
            _tick := signextend(2, shr(TICK_OFFSET, _packed))
        }
    }
    function protocolFee(Slot0 _packed) internal pure returns (uint24 _protocolFee) {
        assembly ("memory-safe") {
            _protocolFee := and(MASK_24_BITS, shr(PROTOCOL_FEE_OFFSET, _packed))
        }
    }
    function lpFee(Slot0 _packed) internal pure returns (uint24 _lpFee) {
        assembly ("memory-safe") {
            _lpFee := and(MASK_24_BITS, shr(LP_FEE_OFFSET, _packed))
        }
    }
    // #### SETTERS ####
    function setSqrtPriceX96(Slot0 _packed, uint160 _sqrtPriceX96) internal pure returns (Slot0 _result) {
        assembly ("memory-safe") {
            _result := or(and(not(MASK_160_BITS), _packed), and(MASK_160_BITS, _sqrtPriceX96))
        }
    }
    function setTick(Slot0 _packed, int24 _tick) internal pure returns (Slot0 _result) {
        assembly ("memory-safe") {
            _result := or(and(not(shl(TICK_OFFSET, MASK_24_BITS)), _packed), shl(TICK_OFFSET, and(MASK_24_BITS, _tick)))
        }
    }
    function setProtocolFee(Slot0 _packed, uint24 _protocolFee) internal pure returns (Slot0 _result) {
        assembly ("memory-safe") {
            _result :=
                or(
                    and(not(shl(PROTOCOL_FEE_OFFSET, MASK_24_BITS)), _packed),
                    shl(PROTOCOL_FEE_OFFSET, and(MASK_24_BITS, _protocolFee))
                )
        }
    }
    function setLpFee(Slot0 _packed, uint24 _lpFee) internal pure returns (Slot0 _result) {
        assembly ("memory-safe") {
            _result :=
                or(and(not(shl(LP_FEE_OFFSET, MASK_24_BITS)), _packed), shl(LP_FEE_OFFSET, and(MASK_24_BITS, _lpFee)))
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @notice library of functions related to protocol fees
library ProtocolFeeLibrary {
    /// @notice Max protocol fee is 0.1% (1000 pips)
    /// @dev Increasing these values could lead to overflow in Pool.swap
    uint16 public constant MAX_PROTOCOL_FEE = 1000;
    /// @notice Thresholds used for optimized bounds checks on protocol fees
    uint24 internal constant FEE_0_THRESHOLD = 1001;
    uint24 internal constant FEE_1_THRESHOLD = 1001 << 12;
    /// @notice the protocol fee is represented in hundredths of a bip
    uint256 internal constant PIPS_DENOMINATOR = 1_000_000;
    function getZeroForOneFee(uint24 self) internal pure returns (uint16) {
        return uint16(self & 0xfff);
    }
    function getOneForZeroFee(uint24 self) internal pure returns (uint16) {
        return uint16(self >> 12);
    }
    function isValidProtocolFee(uint24 self) internal pure returns (bool valid) {
        // Equivalent to: getZeroForOneFee(self) <= MAX_PROTOCOL_FEE && getOneForZeroFee(self) <= MAX_PROTOCOL_FEE
        assembly ("memory-safe") {
            let isZeroForOneFeeOk := lt(and(self, 0xfff), FEE_0_THRESHOLD)
            let isOneForZeroFeeOk := lt(and(self, 0xfff000), FEE_1_THRESHOLD)
            valid := and(isZeroForOneFeeOk, isOneForZeroFeeOk)
        }
    }
    // The protocol fee is taken from the input amount first and then the LP fee is taken from the remaining
    // The swap fee is capped at 100%
    // Equivalent to protocolFee + lpFee(1_000_000 - protocolFee) / 1_000_000 (rounded up)
    /// @dev here `self` is just a single direction's protocol fee, not a packed type of 2 protocol fees
    function calculateSwapFee(uint16 self, uint24 lpFee) internal pure returns (uint24 swapFee) {
        // protocolFee + lpFee - (protocolFee * lpFee / 1_000_000)
        assembly ("memory-safe") {
            self := and(self, 0xfff)
            lpFee := and(lpFee, 0xffffff)
            let numerator := mul(self, lpFee)
            swapFee := sub(add(self, lpFee), div(numerator, PIPS_DENOMINATOR))
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title Math library for liquidity
library LiquidityMath {
    /// @notice Add a signed liquidity delta to liquidity and revert if it overflows or underflows
    /// @param x The liquidity before change
    /// @param y The delta by which liquidity should be changed
    /// @return z The liquidity delta
    function addDelta(uint128 x, int128 y) internal pure returns (uint128 z) {
        assembly ("memory-safe") {
            z := add(and(x, 0xffffffffffffffffffffffffffffffff), signextend(15, y))
            if shr(128, z) {
                // revert SafeCastOverflow()
                mstore(0, 0x93dafdf1)
                revert(0x1c, 0x04)
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title Contains 512-bit math functions
/// @notice Facilitates multiplication and division that can have overflow of an intermediate value without any loss of precision
/// @dev Handles "phantom overflow" i.e., allows multiplication and division where an intermediate value overflows 256 bits
library FullMath {
    /// @notice Calculates floor(a×b÷denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
    /// @param a The multiplicand
    /// @param b The multiplier
    /// @param denominator The divisor
    /// @return result The 256-bit result
    /// @dev Credit to Remco Bloemen under MIT license https://xn--2-umb.com/21/muldiv
    function mulDiv(uint256 a, uint256 b, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = a * b
            // Compute the product mod 2**256 and mod 2**256 - 1
            // then use the Chinese Remainder Theorem to reconstruct
            // the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2**256 + prod0
            uint256 prod0 = a * b; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly ("memory-safe") {
                let mm := mulmod(a, b, not(0))
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }
            // Make sure the result is less than 2**256.
            // Also prevents denominator == 0
            require(denominator > prod1);
            // Handle non-overflow cases, 256 by 256 division
            if (prod1 == 0) {
                assembly ("memory-safe") {
                    result := div(prod0, denominator)
                }
                return result;
            }
            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////
            // Make division exact by subtracting the remainder from [prod1 prod0]
            // Compute remainder using mulmod
            uint256 remainder;
            assembly ("memory-safe") {
                remainder := mulmod(a, b, denominator)
            }
            // Subtract 256 bit number from 512 bit number
            assembly ("memory-safe") {
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }
            // Factor powers of two out of denominator
            // Compute largest power of two divisor of denominator.
            // Always >= 1.
            uint256 twos = (0 - denominator) & denominator;
            // Divide denominator by power of two
            assembly ("memory-safe") {
                denominator := div(denominator, twos)
            }
            // Divide [prod1 prod0] by the factors of two
            assembly ("memory-safe") {
                prod0 := div(prod0, twos)
            }
            // Shift in bits from prod1 into prod0. For this we need
            // to flip `twos` such that it is 2**256 / twos.
            // If twos is zero, then it becomes one
            assembly ("memory-safe") {
                twos := add(div(sub(0, twos), twos), 1)
            }
            prod0 |= prod1 * twos;
            // Invert denominator mod 2**256
            // Now that denominator is an odd number, it has an inverse
            // modulo 2**256 such that denominator * inv = 1 mod 2**256.
            // Compute the inverse by starting with a seed that is correct
            // correct for four bits. That is, denominator * inv = 1 mod 2**4
            uint256 inv = (3 * denominator) ^ 2;
            // Now use Newton-Raphson iteration to improve the precision.
            // Thanks to Hensel's lifting lemma, this also works in modular
            // arithmetic, doubling the correct bits in each step.
            inv *= 2 - denominator * inv; // inverse mod 2**8
            inv *= 2 - denominator * inv; // inverse mod 2**16
            inv *= 2 - denominator * inv; // inverse mod 2**32
            inv *= 2 - denominator * inv; // inverse mod 2**64
            inv *= 2 - denominator * inv; // inverse mod 2**128
            inv *= 2 - denominator * inv; // inverse mod 2**256
            // Because the division is now exact we can divide by multiplying
            // with the modular inverse of denominator. This will give us the
            // correct result modulo 2**256. Since the preconditions guarantee
            // that the outcome is less than 2**256, this is the final result.
            // We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inv;
            return result;
        }
    }
    /// @notice Calculates ceil(a×b÷denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
    /// @param a The multiplicand
    /// @param b The multiplier
    /// @param denominator The divisor
    /// @return result The 256-bit result
    function mulDivRoundingUp(uint256 a, uint256 b, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            result = mulDiv(a, b, denominator);
            if (mulmod(a, b, denominator) != 0) {
                require(++result > 0);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title Minimal ERC20 interface for Uniswap
/// @notice Contains a subset of the full ERC20 interface that is used in Uniswap V3
interface IERC20Minimal {
    /// @notice Returns an account's balance in the token
    /// @param account The account for which to look up the number of tokens it has, i.e. its balance
    /// @return The number of tokens held by the account
    function balanceOf(address account) external view returns (uint256);
    /// @notice Transfers the amount of token from the `msg.sender` to the recipient
    /// @param recipient The account that will receive the amount transferred
    /// @param amount The number of tokens to send from the sender to the recipient
    /// @return Returns true for a successful transfer, false for an unsuccessful transfer
    function transfer(address recipient, uint256 amount) external returns (bool);
    /// @notice Returns the current allowance given to a spender by an owner
    /// @param owner The account of the token owner
    /// @param spender The account of the token spender
    /// @return The current allowance granted by `owner` to `spender`
    function allowance(address owner, address spender) external view returns (uint256);
    /// @notice Sets the allowance of a spender from the `msg.sender` to the value `amount`
    /// @param spender The account which will be allowed to spend a given amount of the owners tokens
    /// @param amount The amount of tokens allowed to be used by `spender`
    /// @return Returns true for a successful approval, false for unsuccessful
    function approve(address spender, uint256 amount) external returns (bool);
    /// @notice Transfers `amount` tokens from `sender` to `recipient` up to the allowance given to the `msg.sender`
    /// @param sender The account from which the transfer will be initiated
    /// @param recipient The recipient of the transfer
    /// @param amount The amount of the transfer
    /// @return Returns true for a successful transfer, false for unsuccessful
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
    /// @notice Event emitted when tokens are transferred from one address to another, either via `#transfer` or `#transferFrom`.
    /// @param from The account from which the tokens were sent, i.e. the balance decreased
    /// @param to The account to which the tokens were sent, i.e. the balance increased
    /// @param value The amount of tokens that were transferred
    event Transfer(address indexed from, address indexed to, uint256 value);
    /// @notice Event emitted when the approval amount for the spender of a given owner's tokens changes.
    /// @param owner The account that approved spending of its tokens
    /// @param spender The account for which the spending allowance was modified
    /// @param value The new allowance from the owner to the spender
    event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title BitMath
/// @dev This library provides functionality for computing bit properties of an unsigned integer
/// @author Solady (https://github.com/Vectorized/solady/blob/8200a70e8dc2a77ecb074fc2e99a2a0d36547522/src/utils/LibBit.sol)
library BitMath {
    /// @notice Returns the index of the most significant bit of the number,
    ///     where the least significant bit is at index 0 and the most significant bit is at index 255
    /// @param x the value for which to compute the most significant bit, must be greater than 0
    /// @return r the index of the most significant bit
    function mostSignificantBit(uint256 x) internal pure returns (uint8 r) {
        require(x > 0);
        assembly ("memory-safe") {
            r := shl(7, lt(0xffffffffffffffffffffffffffffffff, x))
            r := or(r, shl(6, lt(0xffffffffffffffff, shr(r, x))))
            r := or(r, shl(5, lt(0xffffffff, shr(r, x))))
            r := or(r, shl(4, lt(0xffff, shr(r, x))))
            r := or(r, shl(3, lt(0xff, shr(r, x))))
            // forgefmt: disable-next-item
            r := or(r, byte(and(0x1f, shr(shr(r, x), 0x8421084210842108cc6318c6db6d54be)),
                0x0706060506020500060203020504000106050205030304010505030400000000))
        }
    }
    /// @notice Returns the index of the least significant bit of the number,
    ///     where the least significant bit is at index 0 and the most significant bit is at index 255
    /// @param x the value for which to compute the least significant bit, must be greater than 0
    /// @return r the index of the least significant bit
    function leastSignificantBit(uint256 x) internal pure returns (uint8 r) {
        require(x > 0);
        assembly ("memory-safe") {
            // Isolate the least significant bit.
            x := and(x, sub(0, x))
            // For the upper 3 bits of the result, use a De Bruijn-like lookup.
            // Credit to adhusson: https://blog.adhusson.com/cheap-find-first-set-evm/
            // forgefmt: disable-next-item
            r := shl(5, shr(252, shl(shl(2, shr(250, mul(x,
                0xb6db6db6ddddddddd34d34d349249249210842108c6318c639ce739cffffffff))),
                0x8040405543005266443200005020610674053026020000107506200176117077)))
            // For the lower 5 bits of the result, use a De Bruijn lookup.
            // forgefmt: disable-next-item
            r := or(r, byte(and(div(0xd76453e0, shr(r, x)), 0x1f),
                0x001f0d1e100c1d070f090b19131c1706010e11080a1a141802121b1503160405))
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @notice Interface for claims over a contract balance, wrapped as a ERC6909
interface IERC6909Claims {
    /*//////////////////////////////////////////////////////////////
                                 EVENTS
    //////////////////////////////////////////////////////////////*/
    event OperatorSet(address indexed owner, address indexed operator, bool approved);
    event Approval(address indexed owner, address indexed spender, uint256 indexed id, uint256 amount);
    event Transfer(address caller, address indexed from, address indexed to, uint256 indexed id, uint256 amount);
    /*//////////////////////////////////////////////////////////////
                                 FUNCTIONS
    //////////////////////////////////////////////////////////////*/
    /// @notice Owner balance of an id.
    /// @param owner The address of the owner.
    /// @param id The id of the token.
    /// @return amount The balance of the token.
    function balanceOf(address owner, uint256 id) external view returns (uint256 amount);
    /// @notice Spender allowance of an id.
    /// @param owner The address of the owner.
    /// @param spender The address of the spender.
    /// @param id The id of the token.
    /// @return amount The allowance of the token.
    function allowance(address owner, address spender, uint256 id) external view returns (uint256 amount);
    /// @notice Checks if a spender is approved by an owner as an operator
    /// @param owner The address of the owner.
    /// @param spender The address of the spender.
    /// @return approved The approval status.
    function isOperator(address owner, address spender) external view returns (bool approved);
    /// @notice Transfers an amount of an id from the caller to a receiver.
    /// @param receiver The address of the receiver.
    /// @param id The id of the token.
    /// @param amount The amount of the token.
    /// @return bool True, always, unless the function reverts
    function transfer(address receiver, uint256 id, uint256 amount) external returns (bool);
    /// @notice Transfers an amount of an id from a sender to a receiver.
    /// @param sender The address of the sender.
    /// @param receiver The address of the receiver.
    /// @param id The id of the token.
    /// @param amount The amount of the token.
    /// @return bool True, always, unless the function reverts
    function transferFrom(address sender, address receiver, uint256 id, uint256 amount) external returns (bool);
    /// @notice Approves an amount of an id to a spender.
    /// @param spender The address of the spender.
    /// @param id The id of the token.
    /// @param amount The amount of the token.
    /// @return bool True, always
    function approve(address spender, uint256 id, uint256 amount) external returns (bool);
    /// @notice Sets or removes an operator for the caller.
    /// @param operator The address of the operator.
    /// @param approved The approval status.
    /// @return bool True, always
    function setOperator(address operator, bool approved) external returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {Currency} from "../types/Currency.sol";
import {PoolId} from "../types/PoolId.sol";
import {PoolKey} from "../types/PoolKey.sol";
/// @notice Interface for all protocol-fee related functions in the pool manager
interface IProtocolFees {
    /// @notice Thrown when protocol fee is set too high
    error ProtocolFeeTooLarge(uint24 fee);
    /// @notice Thrown when collectProtocolFees or setProtocolFee is not called by the controller.
    error InvalidCaller();
    /// @notice Thrown when collectProtocolFees is attempted on a token that is synced.
    error ProtocolFeeCurrencySynced();
    /// @notice Emitted when the protocol fee controller address is updated in setProtocolFeeController.
    event ProtocolFeeControllerUpdated(address indexed protocolFeeController);
    /// @notice Emitted when the protocol fee is updated for a pool.
    event ProtocolFeeUpdated(PoolId indexed id, uint24 protocolFee);
    /// @notice Given a currency address, returns the protocol fees accrued in that currency
    /// @param currency The currency to check
    /// @return amount The amount of protocol fees accrued in the currency
    function protocolFeesAccrued(Currency currency) external view returns (uint256 amount);
    /// @notice Sets the protocol fee for the given pool
    /// @param key The key of the pool to set a protocol fee for
    /// @param newProtocolFee The fee to set
    function setProtocolFee(PoolKey memory key, uint24 newProtocolFee) external;
    /// @notice Sets the protocol fee controller
    /// @param controller The new protocol fee controller
    function setProtocolFeeController(address controller) external;
    /// @notice Collects the protocol fees for a given recipient and currency, returning the amount collected
    /// @dev This will revert if the contract is unlocked
    /// @param recipient The address to receive the protocol fees
    /// @param currency The currency to withdraw
    /// @param amount The amount of currency to withdraw
    /// @return amountCollected The amount of currency successfully withdrawn
    function collectProtocolFees(address recipient, Currency currency, uint256 amount)
        external
        returns (uint256 amountCollected);
    /// @notice Returns the current protocol fee controller address
    /// @return address The current protocol fee controller address
    function protocolFeeController() external view returns (address);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @notice Interface for functions to access any storage slot in a contract
interface IExtsload {
    /// @notice Called by external contracts to access granular pool state
    /// @param slot Key of slot to sload
    /// @return value The value of the slot as bytes32
    function extsload(bytes32 slot) external view returns (bytes32 value);
    /// @notice Called by external contracts to access granular pool state
    /// @param startSlot Key of slot to start sloading from
    /// @param nSlots Number of slots to load into return value
    /// @return values List of loaded values.
    function extsload(bytes32 startSlot, uint256 nSlots) external view returns (bytes32[] memory values);
    /// @notice Called by external contracts to access sparse pool state
    /// @param slots List of slots to SLOAD from.
    /// @return values List of loaded values.
    function extsload(bytes32[] calldata slots) external view returns (bytes32[] memory values);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;
/// @notice Interface for functions to access any transient storage slot in a contract
interface IExttload {
    /// @notice Called by external contracts to access transient storage of the contract
    /// @param slot Key of slot to tload
    /// @return value The value of the slot as bytes32
    function exttload(bytes32 slot) external view returns (bytes32 value);
    /// @notice Called by external contracts to access sparse transient pool state
    /// @param slots List of slots to tload
    /// @return values List of loaded values
    function exttload(bytes32[] calldata slots) external view returns (bytes32[] memory values);
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;
/// @notice Simple single owner authorization mixin.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/auth/Owned.sol)
abstract contract Owned {
    /*//////////////////////////////////////////////////////////////
                                 EVENTS
    //////////////////////////////////////////////////////////////*/
    event OwnershipTransferred(address indexed user, address indexed newOwner);
    /*//////////////////////////////////////////////////////////////
                            OWNERSHIP STORAGE
    //////////////////////////////////////////////////////////////*/
    address public owner;
    modifier onlyOwner() virtual {
        require(msg.sender == owner, "UNAUTHORIZED");
        _;
    }
    /*//////////////////////////////////////////////////////////////
                               CONSTRUCTOR
    //////////////////////////////////////////////////////////////*/
    constructor(address _owner) {
        owner = _owner;
        emit OwnershipTransferred(address(0), _owner);
    }
    /*//////////////////////////////////////////////////////////////
                             OWNERSHIP LOGIC
    //////////////////////////////////////////////////////////////*/
    function transferOwnership(address newOwner) public virtual onlyOwner {
        owner = newOwner;
        emit OwnershipTransferred(msg.sender, newOwner);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {IERC6909Claims} from "./interfaces/external/IERC6909Claims.sol";
/// @notice Minimalist and gas efficient standard ERC6909 implementation.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/tokens/ERC6909.sol)
/// @dev Copied from the commit at 4b47a19038b798b4a33d9749d25e570443520647
/// @dev This contract has been modified from the implementation at the above link.
abstract contract ERC6909 is IERC6909Claims {
    /*//////////////////////////////////////////////////////////////
                             ERC6909 STORAGE
    //////////////////////////////////////////////////////////////*/
    mapping(address owner => mapping(address operator => bool isOperator)) public isOperator;
    mapping(address owner => mapping(uint256 id => uint256 balance)) public balanceOf;
    mapping(address owner => mapping(address spender => mapping(uint256 id => uint256 amount))) public allowance;
    /*//////////////////////////////////////////////////////////////
                              ERC6909 LOGIC
    //////////////////////////////////////////////////////////////*/
    function transfer(address receiver, uint256 id, uint256 amount) public virtual returns (bool) {
        balanceOf[msg.sender][id] -= amount;
        balanceOf[receiver][id] += amount;
        emit Transfer(msg.sender, msg.sender, receiver, id, amount);
        return true;
    }
    function transferFrom(address sender, address receiver, uint256 id, uint256 amount) public virtual returns (bool) {
        if (msg.sender != sender && !isOperator[sender][msg.sender]) {
            uint256 allowed = allowance[sender][msg.sender][id];
            if (allowed != type(uint256).max) allowance[sender][msg.sender][id] = allowed - amount;
        }
        balanceOf[sender][id] -= amount;
        balanceOf[receiver][id] += amount;
        emit Transfer(msg.sender, sender, receiver, id, amount);
        return true;
    }
    function approve(address spender, uint256 id, uint256 amount) public virtual returns (bool) {
        allowance[msg.sender][spender][id] = amount;
        emit Approval(msg.sender, spender, id, amount);
        return true;
    }
    function setOperator(address operator, bool approved) public virtual returns (bool) {
        isOperator[msg.sender][operator] = approved;
        emit OperatorSet(msg.sender, operator, approved);
        return true;
    }
    /*//////////////////////////////////////////////////////////////
                              ERC165 LOGIC
    //////////////////////////////////////////////////////////////*/
    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {
        return interfaceId == 0x01ffc9a7 // ERC165 Interface ID for ERC165
            || interfaceId == 0x0f632fb3; // ERC165 Interface ID for ERC6909
    }
    /*//////////////////////////////////////////////////////////////
                        INTERNAL MINT/BURN LOGIC
    //////////////////////////////////////////////////////////////*/
    function _mint(address receiver, uint256 id, uint256 amount) internal virtual {
        balanceOf[receiver][id] += amount;
        emit Transfer(msg.sender, address(0), receiver, id, amount);
    }
    function _burn(address sender, uint256 id, uint256 amount) internal virtual {
        balanceOf[sender][id] -= amount;
        emit Transfer(msg.sender, sender, address(0), id, amount);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title FixedPoint96
/// @notice A library for handling binary fixed point numbers, see https://en.wikipedia.org/wiki/Q_(number_format)
/// @dev Used in SqrtPriceMath.sol
library FixedPoint96 {
    uint8 internal constant RESOLUTION = 96;
    uint256 internal constant Q96 = 0x1000000000000000000000000;
}

pragma solidity ^0.4.17;

/**
 * @title SafeMath
 * @dev Math operations with safety checks that throw on error
 */
library SafeMath {
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }
        uint256 c = a * b;
        assert(c / a == b);
        return c;
    }

    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        // assert(b > 0); // Solidity automatically throws when dividing by 0
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold
        return c;
    }

    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        assert(b <= a);
        return a - b;
    }

    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        assert(c >= a);
        return c;
    }
}

/**
 * @title Ownable
 * @dev The Ownable contract has an owner address, and provides basic authorization control
 * functions, this simplifies the implementation of "user permissions".
 */
contract Ownable {
    address public owner;

    /**
      * @dev The Ownable constructor sets the original `owner` of the contract to the sender
      * account.
      */
    function Ownable() public {
        owner = msg.sender;
    }

    /**
      * @dev Throws if called by any account other than the owner.
      */
    modifier onlyOwner() {
        require(msg.sender == owner);
        _;
    }

    /**
    * @dev Allows the current owner to transfer control of the contract to a newOwner.
    * @param newOwner The address to transfer ownership to.
    */
    function transferOwnership(address newOwner) public onlyOwner {
        if (newOwner != address(0)) {
            owner = newOwner;
        }
    }

}

/**
 * @title ERC20Basic
 * @dev Simpler version of ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/20
 */
contract ERC20Basic {
    uint public _totalSupply;
    function totalSupply() public constant returns (uint);
    function balanceOf(address who) public constant returns (uint);
    function transfer(address to, uint value) public;
    event Transfer(address indexed from, address indexed to, uint value);
}

/**
 * @title ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/20
 */
contract ERC20 is ERC20Basic {
    function allowance(address owner, address spender) public constant returns (uint);
    function transferFrom(address from, address to, uint value) public;
    function approve(address spender, uint value) public;
    event Approval(address indexed owner, address indexed spender, uint value);
}

/**
 * @title Basic token
 * @dev Basic version of StandardToken, with no allowances.
 */
contract BasicToken is Ownable, ERC20Basic {
    using SafeMath for uint;

    mapping(address => uint) public balances;

    // additional variables for use if transaction fees ever became necessary
    uint public basisPointsRate = 0;
    uint public maximumFee = 0;

    /**
    * @dev Fix for the ERC20 short address attack.
    */
    modifier onlyPayloadSize(uint size) {
        require(!(msg.data.length < size + 4));
        _;
    }

    /**
    * @dev transfer token for a specified address
    * @param _to The address to transfer to.
    * @param _value The amount to be transferred.
    */
    function transfer(address _to, uint _value) public onlyPayloadSize(2 * 32) {
        uint fee = (_value.mul(basisPointsRate)).div(10000);
        if (fee > maximumFee) {
            fee = maximumFee;
        }
        uint sendAmount = _value.sub(fee);
        balances[msg.sender] = balances[msg.sender].sub(_value);
        balances[_to] = balances[_to].add(sendAmount);
        if (fee > 0) {
            balances[owner] = balances[owner].add(fee);
            Transfer(msg.sender, owner, fee);
        }
        Transfer(msg.sender, _to, sendAmount);
    }

    /**
    * @dev Gets the balance of the specified address.
    * @param _owner The address to query the the balance of.
    * @return An uint representing the amount owned by the passed address.
    */
    function balanceOf(address _owner) public constant returns (uint balance) {
        return balances[_owner];
    }

}

/**
 * @title Standard ERC20 token
 *
 * @dev Implementation of the basic standard token.
 * @dev https://github.com/ethereum/EIPs/issues/20
 * @dev Based oncode by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
 */
contract StandardToken is BasicToken, ERC20 {

    mapping (address => mapping (address => uint)) public allowed;

    uint public constant MAX_UINT = 2**256 - 1;

    /**
    * @dev Transfer tokens from one address to another
    * @param _from address The address which you want to send tokens from
    * @param _to address The address which you want to transfer to
    * @param _value uint the amount of tokens to be transferred
    */
    function transferFrom(address _from, address _to, uint _value) public onlyPayloadSize(3 * 32) {
        var _allowance = allowed[_from][msg.sender];

        // Check is not needed because sub(_allowance, _value) will already throw if this condition is not met
        // if (_value > _allowance) throw;

        uint fee = (_value.mul(basisPointsRate)).div(10000);
        if (fee > maximumFee) {
            fee = maximumFee;
        }
        if (_allowance < MAX_UINT) {
            allowed[_from][msg.sender] = _allowance.sub(_value);
        }
        uint sendAmount = _value.sub(fee);
        balances[_from] = balances[_from].sub(_value);
        balances[_to] = balances[_to].add(sendAmount);
        if (fee > 0) {
            balances[owner] = balances[owner].add(fee);
            Transfer(_from, owner, fee);
        }
        Transfer(_from, _to, sendAmount);
    }

    /**
    * @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
    * @param _spender The address which will spend the funds.
    * @param _value The amount of tokens to be spent.
    */
    function approve(address _spender, uint _value) public onlyPayloadSize(2 * 32) {

        // To change the approve amount you first have to reduce the addresses`
        //  allowance to zero by calling `approve(_spender, 0)` if it is not
        //  already 0 to mitigate the race condition described here:
        //  https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
        require(!((_value != 0) && (allowed[msg.sender][_spender] != 0)));

        allowed[msg.sender][_spender] = _value;
        Approval(msg.sender, _spender, _value);
    }

    /**
    * @dev Function to check the amount of tokens than an owner allowed to a spender.
    * @param _owner address The address which owns the funds.
    * @param _spender address The address which will spend the funds.
    * @return A uint specifying the amount of tokens still available for the spender.
    */
    function allowance(address _owner, address _spender) public constant returns (uint remaining) {
        return allowed[_owner][_spender];
    }

}


/**
 * @title Pausable
 * @dev Base contract which allows children to implement an emergency stop mechanism.
 */
contract Pausable is Ownable {
  event Pause();
  event Unpause();

  bool public paused = false;


  /**
   * @dev Modifier to make a function callable only when the contract is not paused.
   */
  modifier whenNotPaused() {
    require(!paused);
    _;
  }

  /**
   * @dev Modifier to make a function callable only when the contract is paused.
   */
  modifier whenPaused() {
    require(paused);
    _;
  }

  /**
   * @dev called by the owner to pause, triggers stopped state
   */
  function pause() onlyOwner whenNotPaused public {
    paused = true;
    Pause();
  }

  /**
   * @dev called by the owner to unpause, returns to normal state
   */
  function unpause() onlyOwner whenPaused public {
    paused = false;
    Unpause();
  }
}

contract BlackList is Ownable, BasicToken {

    /////// Getters to allow the same blacklist to be used also by other contracts (including upgraded Tether) ///////
    function getBlackListStatus(address _maker) external constant returns (bool) {
        return isBlackListed[_maker];
    }

    function getOwner() external constant returns (address) {
        return owner;
    }

    mapping (address => bool) public isBlackListed;
    
    function addBlackList (address _evilUser) public onlyOwner {
        isBlackListed[_evilUser] = true;
        AddedBlackList(_evilUser);
    }

    function removeBlackList (address _clearedUser) public onlyOwner {
        isBlackListed[_clearedUser] = false;
        RemovedBlackList(_clearedUser);
    }

    function destroyBlackFunds (address _blackListedUser) public onlyOwner {
        require(isBlackListed[_blackListedUser]);
        uint dirtyFunds = balanceOf(_blackListedUser);
        balances[_blackListedUser] = 0;
        _totalSupply -= dirtyFunds;
        DestroyedBlackFunds(_blackListedUser, dirtyFunds);
    }

    event DestroyedBlackFunds(address _blackListedUser, uint _balance);

    event AddedBlackList(address _user);

    event RemovedBlackList(address _user);

}

contract UpgradedStandardToken is StandardToken{
    // those methods are called by the legacy contract
    // and they must ensure msg.sender to be the contract address
    function transferByLegacy(address from, address to, uint value) public;
    function transferFromByLegacy(address sender, address from, address spender, uint value) public;
    function approveByLegacy(address from, address spender, uint value) public;
}

contract TetherToken is Pausable, StandardToken, BlackList {

    string public name;
    string public symbol;
    uint public decimals;
    address public upgradedAddress;
    bool public deprecated;

    //  The contract can be initialized with a number of tokens
    //  All the tokens are deposited to the owner address
    //
    // @param _balance Initial supply of the contract
    // @param _name Token Name
    // @param _symbol Token symbol
    // @param _decimals Token decimals
    function TetherToken(uint _initialSupply, string _name, string _symbol, uint _decimals) public {
        _totalSupply = _initialSupply;
        name = _name;
        symbol = _symbol;
        decimals = _decimals;
        balances[owner] = _initialSupply;
        deprecated = false;
    }

    // Forward ERC20 methods to upgraded contract if this one is deprecated
    function transfer(address _to, uint _value) public whenNotPaused {
        require(!isBlackListed[msg.sender]);
        if (deprecated) {
            return UpgradedStandardToken(upgradedAddress).transferByLegacy(msg.sender, _to, _value);
        } else {
            return super.transfer(_to, _value);
        }
    }

    // Forward ERC20 methods to upgraded contract if this one is deprecated
    function transferFrom(address _from, address _to, uint _value) public whenNotPaused {
        require(!isBlackListed[_from]);
        if (deprecated) {
            return UpgradedStandardToken(upgradedAddress).transferFromByLegacy(msg.sender, _from, _to, _value);
        } else {
            return super.transferFrom(_from, _to, _value);
        }
    }

    // Forward ERC20 methods to upgraded contract if this one is deprecated
    function balanceOf(address who) public constant returns (uint) {
        if (deprecated) {
            return UpgradedStandardToken(upgradedAddress).balanceOf(who);
        } else {
            return super.balanceOf(who);
        }
    }

    // Forward ERC20 methods to upgraded contract if this one is deprecated
    function approve(address _spender, uint _value) public onlyPayloadSize(2 * 32) {
        if (deprecated) {
            return UpgradedStandardToken(upgradedAddress).approveByLegacy(msg.sender, _spender, _value);
        } else {
            return super.approve(_spender, _value);
        }
    }

    // Forward ERC20 methods to upgraded contract if this one is deprecated
    function allowance(address _owner, address _spender) public constant returns (uint remaining) {
        if (deprecated) {
            return StandardToken(upgradedAddress).allowance(_owner, _spender);
        } else {
            return super.allowance(_owner, _spender);
        }
    }

    // deprecate current contract in favour of a new one
    function deprecate(address _upgradedAddress) public onlyOwner {
        deprecated = true;
        upgradedAddress = _upgradedAddress;
        Deprecate(_upgradedAddress);
    }

    // deprecate current contract if favour of a new one
    function totalSupply() public constant returns (uint) {
        if (deprecated) {
            return StandardToken(upgradedAddress).totalSupply();
        } else {
            return _totalSupply;
        }
    }

    // Issue a new amount of tokens
    // these tokens are deposited into the owner address
    //
    // @param _amount Number of tokens to be issued
    function issue(uint amount) public onlyOwner {
        require(_totalSupply + amount > _totalSupply);
        require(balances[owner] + amount > balances[owner]);

        balances[owner] += amount;
        _totalSupply += amount;
        Issue(amount);
    }

    // Redeem tokens.
    // These tokens are withdrawn from the owner address
    // if the balance must be enough to cover the redeem
    // or the call will fail.
    // @param _amount Number of tokens to be issued
    function redeem(uint amount) public onlyOwner {
        require(_totalSupply >= amount);
        require(balances[owner] >= amount);

        _totalSupply -= amount;
        balances[owner] -= amount;
        Redeem(amount);
    }

    function setParams(uint newBasisPoints, uint newMaxFee) public onlyOwner {
        // Ensure transparency by hardcoding limit beyond which fees can never be added
        require(newBasisPoints < 20);
        require(newMaxFee < 50);

        basisPointsRate = newBasisPoints;
        maximumFee = newMaxFee.mul(10**decimals);

        Params(basisPointsRate, maximumFee);
    }

    // Called when new token are issued
    event Issue(uint amount);

    // Called when tokens are redeemed
    event Redeem(uint amount);

    // Called when contract is deprecated
    event Deprecate(address newAddress);

    // Called if contract ever adds fees
    event Params(uint feeBasisPoints, uint maxFee);
}

//SPDX-License-Identifier: MIT
pragma solidity 0.8.21;
contract Error {
    error FluidInfiniteProxyError(uint256 errorId_);
}
//SPDX-License-Identifier: MIT
pragma solidity 0.8.21;
library ErrorTypes {
    /***********************************|
    |         Infinite proxy            | 
    |__________________________________*/
    /// @notice thrown when an implementation does not exist
    uint256 internal constant InfiniteProxy__ImplementationNotExist = 50001;
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.21;
contract Events {
    /// @notice emitted when a new admin is set
    event LogSetAdmin(address indexed oldAdmin, address indexed newAdmin);
    /// @notice emitted when a new dummy implementation is set
    event LogSetDummyImplementation(address indexed oldDummyImplementation, address indexed newDummyImplementation);
    /// @notice emitted when a new implementation is set with certain sigs
    event LogSetImplementation(address indexed implementation, bytes4[] sigs);
    /// @notice emitted when an implementation is removed
    event LogRemoveImplementation(address indexed implementation);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;
import { Events } from "./events.sol";
import { ErrorTypes } from "./errorTypes.sol";
import { Error } from "./error.sol";
import { StorageRead } from "../libraries/storageRead.sol";
contract CoreInternals is StorageRead, Events, Error {
    struct SigsSlot {
        bytes4[] value;
    }
    /// @dev Storage slot with the admin of the contract.
    /// This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
    /// validated in the constructor.
    bytes32 internal constant _ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
    /// @dev Storage slot with the address of the current dummy-implementation.
    /// This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
    /// validated in the constructor.
    bytes32 internal constant _DUMMY_IMPLEMENTATION_SLOT =
        0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
    /// @dev use EIP1967 proxy slot (see _DUMMY_IMPLEMENTATION_SLOT) except for first 4 bytes,
    // which are set to 0. This is combined with a sig which will be set in those first 4 bytes
    bytes32 internal constant _SIG_SLOT_BASE = 0x000000003ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
    /// @dev Returns the storage slot which stores the sigs array set for the implementation.
    function _getSlotImplSigsSlot(address implementation_) internal pure returns (bytes32) {
        return keccak256(abi.encode("eip1967.proxy.implementation", implementation_));
    }
    /// @dev Returns the storage slot which stores the implementation address for the function sig.
    function _getSlotSigsImplSlot(bytes4 sig_) internal pure returns (bytes32 result_) {
        assembly {
            // or operator sets sig_ in first 4 bytes with rest of bytes32 having default value of _SIG_SLOT_BASE
            result_ := or(_SIG_SLOT_BASE, sig_)
        }
    }
    /// @dev Returns an address `data_` located at `slot_`.
    function _getAddressSlot(bytes32 slot_) internal view returns (address data_) {
        assembly {
            data_ := sload(slot_)
        }
    }
    /// @dev Sets an address `data_` located at `slot_`.
    function _setAddressSlot(bytes32 slot_, address data_) internal {
        assembly {
            sstore(slot_, data_)
        }
    }
    /// @dev Returns an `SigsSlot` with member `value` located at `slot`.
    function _getSigsSlot(bytes32 slot_) internal pure returns (SigsSlot storage _r) {
        assembly {
            _r.slot := slot_
        }
    }
    /// @dev Sets new implementation and adds mapping from implementation to sigs and sig to implementation.
    function _setImplementationSigs(address implementation_, bytes4[] memory sigs_) internal {
        require(sigs_.length != 0, "no-sigs");
        bytes32 slot_ = _getSlotImplSigsSlot(implementation_);
        bytes4[] memory sigsCheck_ = _getSigsSlot(slot_).value;
        require(sigsCheck_.length == 0, "implementation-already-exist");
        for (uint256 i; i < sigs_.length; i++) {
            bytes32 sigSlot_ = _getSlotSigsImplSlot(sigs_[i]);
            require(_getAddressSlot(sigSlot_) == address(0), "sig-already-exist");
            _setAddressSlot(sigSlot_, implementation_);
        }
        _getSigsSlot(slot_).value = sigs_;
        emit LogSetImplementation(implementation_, sigs_);
    }
    /// @dev Removes implementation and the mappings corresponding to it.
    function _removeImplementationSigs(address implementation_) internal {
        bytes32 slot_ = _getSlotImplSigsSlot(implementation_);
        bytes4[] memory sigs_ = _getSigsSlot(slot_).value;
        require(sigs_.length != 0, "implementation-not-exist");
        for (uint256 i; i < sigs_.length; i++) {
            bytes32 sigSlot_ = _getSlotSigsImplSlot(sigs_[i]);
            _setAddressSlot(sigSlot_, address(0));
        }
        delete _getSigsSlot(slot_).value;
        emit LogRemoveImplementation(implementation_);
    }
    /// @dev Returns bytes4[] sigs from implementation address. If implemenatation is not registered then returns empty array.
    function _getImplementationSigs(address implementation_) internal view returns (bytes4[] memory) {
        bytes32 slot_ = _getSlotImplSigsSlot(implementation_);
        return _getSigsSlot(slot_).value;
    }
    /// @dev Returns implementation address from bytes4 sig. If sig is not registered then returns address(0).
    function _getSigImplementation(bytes4 sig_) internal view returns (address implementation_) {
        bytes32 slot_ = _getSlotSigsImplSlot(sig_);
        return _getAddressSlot(slot_);
    }
    /// @dev Returns the current admin.
    function _getAdmin() internal view returns (address) {
        return _getAddressSlot(_ADMIN_SLOT);
    }
    /// @dev Returns the current dummy-implementation.
    function _getDummyImplementation() internal view returns (address) {
        return _getAddressSlot(_DUMMY_IMPLEMENTATION_SLOT);
    }
    /// @dev Stores a new address in the EIP1967 admin slot.
    function _setAdmin(address newAdmin_) internal {
        address oldAdmin_ = _getAdmin();
        require(newAdmin_ != address(0), "ERC1967: new admin is the zero address");
        _setAddressSlot(_ADMIN_SLOT, newAdmin_);
        emit LogSetAdmin(oldAdmin_, newAdmin_);
    }
    /// @dev Stores a new address in the EIP1967 implementation slot.
    function _setDummyImplementation(address newDummyImplementation_) internal {
        address oldDummyImplementation_ = _getDummyImplementation();
        _setAddressSlot(_DUMMY_IMPLEMENTATION_SLOT, newDummyImplementation_);
        emit LogSetDummyImplementation(oldDummyImplementation_, newDummyImplementation_);
    }
}
contract AdminInternals is CoreInternals {
    /// @dev Only admin guard
    modifier onlyAdmin() {
        require(msg.sender == _getAdmin(), "only-admin");
        _;
    }
    constructor(address admin_, address dummyImplementation_) {
        _setAdmin(admin_);
        _setDummyImplementation(dummyImplementation_);
    }
    /// @dev Sets new admin.
    function setAdmin(address newAdmin_) external onlyAdmin {
        _setAdmin(newAdmin_);
    }
    /// @dev Sets new dummy-implementation.
    function setDummyImplementation(address newDummyImplementation_) external onlyAdmin {
        _setDummyImplementation(newDummyImplementation_);
    }
    /// @dev Adds new implementation address.
    function addImplementation(address implementation_, bytes4[] calldata sigs_) external onlyAdmin {
        _setImplementationSigs(implementation_, sigs_);
    }
    /// @dev Removes an existing implementation address.
    function removeImplementation(address implementation_) external onlyAdmin {
        _removeImplementationSigs(implementation_);
    }
}
/// @title Proxy
/// @notice This abstract contract provides a fallback function that delegates all calls to another contract using the EVM.
/// It implements the Instadapp infinite-proxy: https://github.com/Instadapp/infinite-proxy
abstract contract Proxy is AdminInternals {
    constructor(address admin_, address dummyImplementation_) AdminInternals(admin_, dummyImplementation_) {}
    /// @dev Returns admin's address.
    function getAdmin() external view returns (address) {
        return _getAdmin();
    }
    /// @dev Returns dummy-implementations's address.
    function getDummyImplementation() external view returns (address) {
        return _getDummyImplementation();
    }
    /// @dev Returns bytes4[] sigs from implementation address If not registered then returns empty array.
    function getImplementationSigs(address impl_) external view returns (bytes4[] memory) {
        return _getImplementationSigs(impl_);
    }
    /// @dev Returns implementation address from bytes4 sig. If sig is not registered then returns address(0).
    function getSigsImplementation(bytes4 sig_) external view returns (address) {
        return _getSigImplementation(sig_);
    }
    /// @dev Fallback function that delegates calls to the address returned by Implementations registry.
    fallback() external payable {
        address implementation_;
        assembly {
            // get slot for sig and directly SLOAD implementation address from storage at that slot
            implementation_ := sload(
                // same as in `_getSlotSigsImplSlot()` but we must also load msg.sig from calldata.
                // msg.sig is first 4 bytes of calldata, so we can use calldataload(0) with a mask
                or(
                    // or operator sets sig_ in first 4 bytes with rest of bytes32 having default value of _SIG_SLOT_BASE
                    _SIG_SLOT_BASE,
                    and(calldataload(0), 0xFFFFFFFF00000000000000000000000000000000000000000000000000000000)
                )
            )
        }
        if (implementation_ == address(0)) {
            revert FluidInfiniteProxyError(ErrorTypes.InfiniteProxy__ImplementationNotExist);
        }
        // Delegate the current call to `implementation`.
        // This does not return to its internall call site, it will return directly to the external caller.
        // solhint-disable-next-line no-inline-assembly
        assembly {
            // Copy msg.data. We take full control of memory in this inline assembly
            // block because it will not return to Solidity code. We overwrite the
            // Solidity scratch pad at memory position 0.
            calldatacopy(0, 0, calldatasize())
            // Call the implementation.
            // out and outsize are 0 because we don't know the size yet.
            let result := delegatecall(gas(), implementation_, 0, calldatasize(), 0, 0)
            // Copy the returned data.
            returndatacopy(0, 0, returndatasize())
            if eq(result, 0) {
                // delegatecall returns 0 on error.
                revert(0, returndatasize())
            }
            return(0, returndatasize())
        }
    }
    receive() external payable {
        // receive method can never have calldata in EVM so no need for any logic here
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.21;
/// @notice implements a method to read uint256 data from storage at a bytes32 storage slot key.
contract StorageRead {
    function readFromStorage(bytes32 slot_) public view returns (uint256 result_) {
        assembly {
            result_ := sload(slot_) // read value from the storage slot
        }
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.21;
import { Proxy } from "../infiniteProxy/proxy.sol";
/// @notice Fluid Liquidity infinte proxy.
/// Liquidity is the central point of the Instadapp Fluid architecture, it is the core interaction point
/// for all allow-listed protocols, such as fTokens, Vault, Flashloan, StETH protocol, DEX protocol etc.
contract FluidLiquidityProxy is Proxy {
    constructor(address admin_, address dummyImplementation_) Proxy(admin_, dummyImplementation_) {}
}

pragma solidity ^0.4.24;

// File: zos-lib/contracts/upgradeability/Proxy.sol

/**
 * @title Proxy
 * @dev Implements delegation of calls to other contracts, with proper
 * forwarding of return values and bubbling of failures.
 * It defines a fallback function that delegates all calls to the address
 * returned by the abstract _implementation() internal function.
 */
contract Proxy {
  /**
   * @dev Fallback function.
   * Implemented entirely in `_fallback`.
   */
  function () payable external {
    _fallback();
  }

  /**
   * @return The Address of the implementation.
   */
  function _implementation() internal view returns (address);

  /**
   * @dev Delegates execution to an implementation contract.
   * This is a low level function that doesn't return to its internal call site.
   * It will return to the external caller whatever the implementation returns.
   * @param implementation Address to delegate.
   */
  function _delegate(address implementation) internal {
    assembly {
      // Copy msg.data. We take full control of memory in this inline assembly
      // block because it will not return to Solidity code. We overwrite the
      // Solidity scratch pad at memory position 0.
      calldatacopy(0, 0, calldatasize)

      // Call the implementation.
      // out and outsize are 0 because we don't know the size yet.
      let result := delegatecall(gas, implementation, 0, calldatasize, 0, 0)

      // Copy the returned data.
      returndatacopy(0, 0, returndatasize)

      switch result
      // delegatecall returns 0 on error.
      case 0 { revert(0, returndatasize) }
      default { return(0, returndatasize) }
    }
  }

  /**
   * @dev Function that is run as the first thing in the fallback function.
   * Can be redefined in derived contracts to add functionality.
   * Redefinitions must call super._willFallback().
   */
  function _willFallback() internal {
  }

  /**
   * @dev fallback implementation.
   * Extracted to enable manual triggering.
   */
  function _fallback() internal {
    _willFallback();
    _delegate(_implementation());
  }
}

// File: openzeppelin-solidity/contracts/AddressUtils.sol

/**
 * Utility library of inline functions on addresses
 */
library AddressUtils {

  /**
   * Returns whether the target address is a contract
   * @dev This function will return false if invoked during the constructor of a contract,
   * as the code is not actually created until after the constructor finishes.
   * @param addr address to check
   * @return whether the target address is a contract
   */
  function isContract(address addr) internal view returns (bool) {
    uint256 size;
    // XXX Currently there is no better way to check if there is a contract in an address
    // than to check the size of the code at that address.
    // See https://ethereum.stackexchange.com/a/14016/36603
    // for more details about how this works.
    // TODO Check this again before the Serenity release, because all addresses will be
    // contracts then.
    // solium-disable-next-line security/no-inline-assembly
    assembly { size := extcodesize(addr) }
    return size > 0;
  }

}

// File: zos-lib/contracts/upgradeability/UpgradeabilityProxy.sol

/**
 * @title UpgradeabilityProxy
 * @dev This contract implements a proxy that allows to change the
 * implementation address to which it will delegate.
 * Such a change is called an implementation upgrade.
 */
contract UpgradeabilityProxy is Proxy {
  /**
   * @dev Emitted when the implementation is upgraded.
   * @param implementation Address of the new implementation.
   */
  event Upgraded(address implementation);

  /**
   * @dev Storage slot with the address of the current implementation.
   * This is the keccak-256 hash of "org.zeppelinos.proxy.implementation", and is
   * validated in the constructor.
   */
  bytes32 private constant IMPLEMENTATION_SLOT = 0x7050c9e0f4ca769c69bd3a8ef740bc37934f8e2c036e5a723fd8ee048ed3f8c3;

  /**
   * @dev Contract constructor.
   * @param _implementation Address of the initial implementation.
   */
  constructor(address _implementation) public {
    assert(IMPLEMENTATION_SLOT == keccak256("org.zeppelinos.proxy.implementation"));

    _setImplementation(_implementation);
  }

  /**
   * @dev Returns the current implementation.
   * @return Address of the current implementation
   */
  function _implementation() internal view returns (address impl) {
    bytes32 slot = IMPLEMENTATION_SLOT;
    assembly {
      impl := sload(slot)
    }
  }

  /**
   * @dev Upgrades the proxy to a new implementation.
   * @param newImplementation Address of the new implementation.
   */
  function _upgradeTo(address newImplementation) internal {
    _setImplementation(newImplementation);
    emit Upgraded(newImplementation);
  }

  /**
   * @dev Sets the implementation address of the proxy.
   * @param newImplementation Address of the new implementation.
   */
  function _setImplementation(address newImplementation) private {
    require(AddressUtils.isContract(newImplementation), "Cannot set a proxy implementation to a non-contract address");

    bytes32 slot = IMPLEMENTATION_SLOT;

    assembly {
      sstore(slot, newImplementation)
    }
  }
}

// File: zos-lib/contracts/upgradeability/AdminUpgradeabilityProxy.sol

/**
 * @title AdminUpgradeabilityProxy
 * @dev This contract combines an upgradeability proxy with an authorization
 * mechanism for administrative tasks.
 * All external functions in this contract must be guarded by the
 * `ifAdmin` modifier. See ethereum/solidity#3864 for a Solidity
 * feature proposal that would enable this to be done automatically.
 */
contract AdminUpgradeabilityProxy is UpgradeabilityProxy {
  /**
   * @dev Emitted when the administration has been transferred.
   * @param previousAdmin Address of the previous admin.
   * @param newAdmin Address of the new admin.
   */
  event AdminChanged(address previousAdmin, address newAdmin);

  /**
   * @dev Storage slot with the admin of the contract.
   * This is the keccak-256 hash of "org.zeppelinos.proxy.admin", and is
   * validated in the constructor.
   */
  bytes32 private constant ADMIN_SLOT = 0x10d6a54a4754c8869d6886b5f5d7fbfa5b4522237ea5c60d11bc4e7a1ff9390b;

  /**
   * @dev Modifier to check whether the `msg.sender` is the admin.
   * If it is, it will run the function. Otherwise, it will delegate the call
   * to the implementation.
   */
  modifier ifAdmin() {
    if (msg.sender == _admin()) {
      _;
    } else {
      _fallback();
    }
  }

  /**
   * Contract constructor.
   * It sets the `msg.sender` as the proxy administrator.
   * @param _implementation address of the initial implementation.
   */
  constructor(address _implementation) UpgradeabilityProxy(_implementation) public {
    assert(ADMIN_SLOT == keccak256("org.zeppelinos.proxy.admin"));

    _setAdmin(msg.sender);
  }

  /**
   * @return The address of the proxy admin.
   */
  function admin() external view ifAdmin returns (address) {
    return _admin();
  }

  /**
   * @return The address of the implementation.
   */
  function implementation() external view ifAdmin returns (address) {
    return _implementation();
  }

  /**
   * @dev Changes the admin of the proxy.
   * Only the current admin can call this function.
   * @param newAdmin Address to transfer proxy administration to.
   */
  function changeAdmin(address newAdmin) external ifAdmin {
    require(newAdmin != address(0), "Cannot change the admin of a proxy to the zero address");
    emit AdminChanged(_admin(), newAdmin);
    _setAdmin(newAdmin);
  }

  /**
   * @dev Upgrade the backing implementation of the proxy.
   * Only the admin can call this function.
   * @param newImplementation Address of the new implementation.
   */
  function upgradeTo(address newImplementation) external ifAdmin {
    _upgradeTo(newImplementation);
  }

  /**
   * @dev Upgrade the backing implementation of the proxy and call a function
   * on the new implementation.
   * This is useful to initialize the proxied contract.
   * @param newImplementation Address of the new implementation.
   * @param data Data to send as msg.data in the low level call.
   * It should include the signature and the parameters of the function to be
   * called, as described in
   * https://solidity.readthedocs.io/en/develop/abi-spec.html#function-selector-and-argument-encoding.
   */
  function upgradeToAndCall(address newImplementation, bytes data) payable external ifAdmin {
    _upgradeTo(newImplementation);
    require(address(this).call.value(msg.value)(data));
  }

  /**
   * @return The admin slot.
   */
  function _admin() internal view returns (address adm) {
    bytes32 slot = ADMIN_SLOT;
    assembly {
      adm := sload(slot)
    }
  }

  /**
   * @dev Sets the address of the proxy admin.
   * @param newAdmin Address of the new proxy admin.
   */
  function _setAdmin(address newAdmin) internal {
    bytes32 slot = ADMIN_SLOT;

    assembly {
      sstore(slot, newAdmin)
    }
  }

  /**
   * @dev Only fall back when the sender is not the admin.
   */
  function _willFallback() internal {
    require(msg.sender != _admin(), "Cannot call fallback function from the proxy admin");
    super._willFallback();
  }
}

// File: contracts/FiatTokenProxy.sol

/**
* Copyright CENTRE SECZ 2018
*
* Permission is hereby granted, free of charge, to any person obtaining a copy 
* of this software and associated documentation files (the "Software"), to deal 
* in the Software without restriction, including without limitation the rights 
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 
* copies of the Software, and to permit persons to whom the Software is furnished to 
* do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all 
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE 
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/

pragma solidity ^0.4.24;


/**
 * @title FiatTokenProxy
 * @dev This contract proxies FiatToken calls and enables FiatToken upgrades
*/ 
contract FiatTokenProxy is AdminUpgradeabilityProxy {
    constructor(address _implementation) public AdminUpgradeabilityProxy(_implementation) {
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;
interface IProxy {
    function setAdmin(address newAdmin_) external;
    function setDummyImplementation(address newDummyImplementation_) external;
    function addImplementation(address implementation_, bytes4[] calldata sigs_) external;
    function removeImplementation(address implementation_) external;
    function getAdmin() external view returns (address);
    function getDummyImplementation() external view returns (address);
    function getImplementationSigs(address impl_) external view returns (bytes4[] memory);
    function getSigsImplementation(bytes4 sig_) external view returns (address);
    function readFromStorage(bytes32 slot_) external view returns (uint256 result_);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.21;
/// @notice implements calculation of address for contracts deployed through CREATE.
/// Accepts contract deployed from which address & nonce
library AddressCalcs {
    /// @notice                         Computes the address of a contract based
    /// @param deployedFrom_            Address from which the contract was deployed
    /// @param nonce_                   Nonce at which the contract was deployed
    /// @return contract_               Address of deployed contract
    function addressCalc(address deployedFrom_, uint nonce_) internal pure returns (address contract_) {
        // @dev based on https://ethereum.stackexchange.com/a/61413
        // nonce of smart contract always starts with 1. so, with nonce 0 there won't be any deployment
        // hence, nonce of vault deployment starts with 1.
        bytes memory data;
        if (nonce_ == 0x00) {
            return address(0);
        } else if (nonce_ <= 0x7f) {
            data = abi.encodePacked(bytes1(0xd6), bytes1(0x94), deployedFrom_, uint8(nonce_));
        } else if (nonce_ <= 0xff) {
            data = abi.encodePacked(bytes1(0xd7), bytes1(0x94), deployedFrom_, bytes1(0x81), uint8(nonce_));
        } else if (nonce_ <= 0xffff) {
            data = abi.encodePacked(bytes1(0xd8), bytes1(0x94), deployedFrom_, bytes1(0x82), uint16(nonce_));
        } else if (nonce_ <= 0xffffff) {
            data = abi.encodePacked(bytes1(0xd9), bytes1(0x94), deployedFrom_, bytes1(0x83), uint24(nonce_));
        } else {
            data = abi.encodePacked(bytes1(0xda), bytes1(0x94), deployedFrom_, bytes1(0x84), uint32(nonce_));
        }
        return address(uint160(uint256(keccak256(data))));
    }
}// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.21;
/// @title library that represents a number in BigNumber(coefficient and exponent) format to store in smaller bits.
/// @notice the number is divided into two parts: a coefficient and an exponent. This comes at a cost of losing some precision
/// at the end of the number because the exponent simply fills it with zeroes. This precision is oftentimes negligible and can
/// result in significant gas cost reduction due to storage space reduction.
/// Also note, a valid big number is as follows: if the exponent is > 0, then coefficient last bits should be occupied to have max precision.
/// @dev roundUp is more like a increase 1, which happens everytime for the same number.
/// roundDown simply sets trailing digits after coefficientSize to zero (floor), only once for the same number.
library BigMathMinified {
    /// @dev constants to use for `roundUp` input param to increase readability
    bool internal constant ROUND_DOWN = false;
    bool internal constant ROUND_UP = true;
    /// @dev converts `normal` number to BigNumber with `exponent` and `coefficient` (or precision).
    /// e.g.:
    /// 5035703444687813576399599 (normal) = (coefficient[32bits], exponent[8bits])[40bits]
    /// 5035703444687813576399599 (decimal) => 10000101010010110100000011111011110010100110100000000011100101001101001101011101111 (binary)
    ///                                     => 10000101010010110100000011111011000000000000000000000000000000000000000000000000000
    ///                                                                        ^-------------------- 51(exponent) -------------- ^
    /// coefficient = 1000,0101,0100,1011,0100,0000,1111,1011               (2236301563)
    /// exponent =                                            0011,0011     (51)
    /// bigNumber =   1000,0101,0100,1011,0100,0000,1111,1011,0011,0011     (572493200179)
    ///
    /// @param normal number which needs to be converted into Big Number
    /// @param coefficientSize at max how many bits of precision there should be (64 = uint64 (64 bits precision))
    /// @param exponentSize at max how many bits of exponent there should be (8 = uint8 (8 bits exponent))
    /// @param roundUp signals if result should be rounded down or up
    /// @return bigNumber converted bigNumber (coefficient << exponent)
    function toBigNumber(
        uint256 normal,
        uint256 coefficientSize,
        uint256 exponentSize,
        bool roundUp
    ) internal pure returns (uint256 bigNumber) {
        assembly {
            let lastBit_
            let number_ := normal
            if gt(number_, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF) {
                number_ := shr(0x80, number_)
                lastBit_ := 0x80
            }
            if gt(number_, 0xFFFFFFFFFFFFFFFF) {
                number_ := shr(0x40, number_)
                lastBit_ := add(lastBit_, 0x40)
            }
            if gt(number_, 0xFFFFFFFF) {
                number_ := shr(0x20, number_)
                lastBit_ := add(lastBit_, 0x20)
            }
            if gt(number_, 0xFFFF) {
                number_ := shr(0x10, number_)
                lastBit_ := add(lastBit_, 0x10)
            }
            if gt(number_, 0xFF) {
                number_ := shr(0x8, number_)
                lastBit_ := add(lastBit_, 0x8)
            }
            if gt(number_, 0xF) {
                number_ := shr(0x4, number_)
                lastBit_ := add(lastBit_, 0x4)
            }
            if gt(number_, 0x3) {
                number_ := shr(0x2, number_)
                lastBit_ := add(lastBit_, 0x2)
            }
            if gt(number_, 0x1) {
                lastBit_ := add(lastBit_, 1)
            }
            if gt(number_, 0) {
                lastBit_ := add(lastBit_, 1)
            }
            if lt(lastBit_, coefficientSize) {
                // for throw exception
                lastBit_ := coefficientSize
            }
            let exponent := sub(lastBit_, coefficientSize)
            let coefficient := shr(exponent, normal)
            if and(roundUp, gt(exponent, 0)) {
                // rounding up is only needed if exponent is > 0, as otherwise the coefficient fully holds the original number
                coefficient := add(coefficient, 1)
                if eq(shl(coefficientSize, 1), coefficient) {
                    // case were coefficient was e.g. 111, with adding 1 it became 1000 (in binary) and coefficientSize 3 bits
                    // final coefficient would exceed it's size. -> reduce coefficent to 100 and increase exponent by 1.
                    coefficient := shl(sub(coefficientSize, 1), 1)
                    exponent := add(exponent, 1)
                }
            }
            if iszero(lt(exponent, shl(exponentSize, 1))) {
                // if exponent is >= exponentSize, the normal number is too big to fit within
                // BigNumber with too small sizes for coefficient and exponent
                revert(0, 0)
            }
            bigNumber := shl(exponentSize, coefficient)
            bigNumber := add(bigNumber, exponent)
        }
    }
    /// @dev get `normal` number from `bigNumber`, `exponentSize` and `exponentMask`
    function fromBigNumber(
        uint256 bigNumber,
        uint256 exponentSize,
        uint256 exponentMask
    ) internal pure returns (uint256 normal) {
        assembly {
            let coefficient := shr(exponentSize, bigNumber)
            let exponent := and(bigNumber, exponentMask)
            normal := shl(exponent, coefficient)
        }
    }
    /// @dev gets the most significant bit `lastBit` of a `normal` number (length of given number of binary format).
    /// e.g.
    /// 5035703444687813576399599 = 10000101010010110100000011111011110010100110100000000011100101001101001101011101111
    /// lastBit =                   ^---------------------------------   83   ----------------------------------------^
    function mostSignificantBit(uint256 normal) internal pure returns (uint lastBit) {
        assembly {
            let number_ := normal
            if gt(normal, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF) {
                number_ := shr(0x80, number_)
                lastBit := 0x80
            }
            if gt(number_, 0xFFFFFFFFFFFFFFFF) {
                number_ := shr(0x40, number_)
                lastBit := add(lastBit, 0x40)
            }
            if gt(number_, 0xFFFFFFFF) {
                number_ := shr(0x20, number_)
                lastBit := add(lastBit, 0x20)
            }
            if gt(number_, 0xFFFF) {
                number_ := shr(0x10, number_)
                lastBit := add(lastBit, 0x10)
            }
            if gt(number_, 0xFF) {
                number_ := shr(0x8, number_)
                lastBit := add(lastBit, 0x8)
            }
            if gt(number_, 0xF) {
                number_ := shr(0x4, number_)
                lastBit := add(lastBit, 0x4)
            }
            if gt(number_, 0x3) {
                number_ := shr(0x2, number_)
                lastBit := add(lastBit, 0x2)
            }
            if gt(number_, 0x1) {
                lastBit := add(lastBit, 1)
            }
            if gt(number_, 0) {
                lastBit := add(lastBit, 1)
            }
        }
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.21;
import { BigMathMinified } from "./bigMathMinified.sol";
import { DexSlotsLink } from "./dexSlotsLink.sol";
// !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
// @DEV ATTENTION: ON ANY CHANGES HERE, MAKE SURE THAT LOGIC IN VAULTS WILL STILL BE VALID.
// SOME CODE THERE ASSUMES DEXCALCS == LIQUIDITYCALCS.
// !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
/// @notice implements calculation methods used for Fluid Dex such as updated withdrawal / borrow limits.
library DexCalcs {
    // constants used for BigMath conversion from and to storage
    uint256 internal constant DEFAULT_EXPONENT_SIZE = 8;
    uint256 internal constant DEFAULT_EXPONENT_MASK = 0xFF;
    uint256 internal constant FOUR_DECIMALS = 1e4;
    uint256 internal constant X14 = 0x3fff;
    uint256 internal constant X18 = 0x3ffff;
    uint256 internal constant X24 = 0xffffff;
    uint256 internal constant X33 = 0x1ffffffff;
    uint256 internal constant X64 = 0xffffffffffffffff;
    ///////////////////////////////////////////////////////////////////////////
    //////////                      CALC LIMITS                       /////////
    ///////////////////////////////////////////////////////////////////////////
    /// @dev calculates withdrawal limit before an operate execution:
    /// amount of user supply that must stay supplied (not amount that can be withdrawn).
    /// i.e. if user has supplied 100m and can withdraw 5M, this method returns the 95M, not the withdrawable amount 5M
    /// @param userSupplyData_ user supply data packed uint256 from storage
    /// @param userSupply_ current user supply amount already extracted from `userSupplyData_` and converted from BigMath
    /// @return currentWithdrawalLimit_ current withdrawal limit updated for expansion since last interaction.
    ///         returned value is in raw for with interest mode, normal amount for interest free mode!
    function calcWithdrawalLimitBeforeOperate(
        uint256 userSupplyData_,
        uint256 userSupply_
    ) internal view returns (uint256 currentWithdrawalLimit_) {
        // @dev must support handling the case where timestamp is 0 (config is set but no interactions yet).
        // first tx where timestamp is 0 will enter `if (lastWithdrawalLimit_ == 0)` because lastWithdrawalLimit_ is not set yet.
        // returning max withdrawal allowed, which is not exactly right but doesn't matter because the first interaction must be
        // a deposit anyway. Important is that it would not revert.
        // Note the first time a deposit brings the user supply amount to above the base withdrawal limit, the active limit
        // is the fully expanded limit immediately.
        // extract last set withdrawal limit
        uint256 lastWithdrawalLimit_ = (userSupplyData_ >> DexSlotsLink.BITS_USER_SUPPLY_PREVIOUS_WITHDRAWAL_LIMIT) &
            X64;
        lastWithdrawalLimit_ =
            (lastWithdrawalLimit_ >> DEFAULT_EXPONENT_SIZE) <<
            (lastWithdrawalLimit_ & DEFAULT_EXPONENT_MASK);
        if (lastWithdrawalLimit_ == 0) {
            // withdrawal limit is not activated. Max withdrawal allowed
            return 0;
        }
        uint256 maxWithdrawableLimit_;
        uint256 temp_;
        unchecked {
            // extract max withdrawable percent of user supply and
            // calculate maximum withdrawable amount expandPercentage of user supply at full expansion duration elapsed
            // e.g.: if 10% expandPercentage, meaning 10% is withdrawable after full expandDuration has elapsed.
            // userSupply_ needs to be atleast 1e73 to overflow max limit of ~1e77 in uint256 (no token in existence where this is possible).
            maxWithdrawableLimit_ =
                (((userSupplyData_ >> DexSlotsLink.BITS_USER_SUPPLY_EXPAND_PERCENT) & X14) * userSupply_) /
                FOUR_DECIMALS;
            // time elapsed since last withdrawal limit was set (in seconds)
            // @dev last process timestamp is guaranteed to exist for withdrawal, as a supply must have happened before.
            // last timestamp can not be > current timestamp
            temp_ = block.timestamp - ((userSupplyData_ >> DexSlotsLink.BITS_USER_SUPPLY_LAST_UPDATE_TIMESTAMP) & X33);
        }
        // calculate withdrawable amount of expandPercent that is elapsed of expandDuration.
        // e.g. if 60% of expandDuration has elapsed, then user should be able to withdraw 6% of user supply, down to 94%.
        // Note: no explicit check for this needed, it is covered by setting minWithdrawalLimit_ if needed.
        temp_ =
            (maxWithdrawableLimit_ * temp_) /
            // extract expand duration: After this, decrement won't happen (user can withdraw 100% of withdraw limit)
            ((userSupplyData_ >> DexSlotsLink.BITS_USER_SUPPLY_EXPAND_DURATION) & X24); // expand duration can never be 0
        // calculate expanded withdrawal limit: last withdrawal limit - withdrawable amount.
        // Note: withdrawable amount here can grow bigger than userSupply if timeElapsed is a lot bigger than expandDuration,
        // which would cause the subtraction `lastWithdrawalLimit_ - withdrawableAmount_` to revert. In that case, set 0
        // which will cause minimum (fully expanded) withdrawal limit to be set in lines below.
        unchecked {
            // underflow explicitly checked & handled
            currentWithdrawalLimit_ = lastWithdrawalLimit_ > temp_ ? lastWithdrawalLimit_ - temp_ : 0;
            // calculate minimum withdrawal limit: minimum amount of user supply that must stay supplied at full expansion.
            // subtraction can not underflow as maxWithdrawableLimit_ is a percentage amount (<=100%) of userSupply_
            temp_ = userSupply_ - maxWithdrawableLimit_;
        }
        // if withdrawal limit is decreased below minimum then set minimum
        // (e.g. when more than expandDuration time has elapsed)
        if (temp_ > currentWithdrawalLimit_) {
            currentWithdrawalLimit_ = temp_;
        }
    }
    /// @dev calculates withdrawal limit after an operate execution:
    /// amount of user supply that must stay supplied (not amount that can be withdrawn).
    /// i.e. if user has supplied 100m and can withdraw 5M, this method returns the 95M, not the withdrawable amount 5M
    /// @param userSupplyData_ user supply data packed uint256 from storage
    /// @param userSupply_ current user supply amount already extracted from `userSupplyData_` and added / subtracted with the executed operate amount
    /// @param newWithdrawalLimit_ current withdrawal limit updated for expansion since last interaction, result from `calcWithdrawalLimitBeforeOperate`
    /// @return withdrawalLimit_ updated withdrawal limit that should be written to storage. returned value is in
    ///                          raw for with interest mode, normal amount for interest free mode!
    function calcWithdrawalLimitAfterOperate(
        uint256 userSupplyData_,
        uint256 userSupply_,
        uint256 newWithdrawalLimit_
    ) internal pure returns (uint256) {
        // temp_ => base withdrawal limit. below this, maximum withdrawals are allowed
        uint256 temp_ = (userSupplyData_ >> DexSlotsLink.BITS_USER_SUPPLY_BASE_WITHDRAWAL_LIMIT) & X18;
        temp_ = (temp_ >> DEFAULT_EXPONENT_SIZE) << (temp_ & DEFAULT_EXPONENT_MASK);
        // if user supply is below base limit then max withdrawals are allowed
        if (userSupply_ < temp_) {
            return 0;
        }
        // temp_ => withdrawal limit expandPercent (is in 1e2 decimals)
        temp_ = (userSupplyData_ >> DexSlotsLink.BITS_USER_SUPPLY_EXPAND_PERCENT) & X14;
        unchecked {
            // temp_ => minimum withdrawal limit: userSupply - max withdrawable limit (userSupply * expandPercent))
            // userSupply_ needs to be atleast 1e73 to overflow max limit of ~1e77 in uint256 (no token in existence where this is possible).
            // subtraction can not underflow as maxWithdrawableLimit_ is a percentage amount (<=100%) of userSupply_
            temp_ = userSupply_ - ((userSupply_ * temp_) / FOUR_DECIMALS);
        }
        // if new (before operation) withdrawal limit is less than minimum limit then set minimum limit.
        // e.g. can happen on new deposits. withdrawal limit is instantly fully expanded in a scenario where
        // increased deposit amount outpaces withrawals.
        if (temp_ > newWithdrawalLimit_) {
            return temp_;
        }
        return newWithdrawalLimit_;
    }
    /// @dev calculates borrow limit before an operate execution:
    /// total amount user borrow can reach (not borrowable amount in current operation).
    /// i.e. if user has borrowed 50M and can still borrow 5M, this method returns the total 55M, not the borrowable amount 5M
    /// @param userBorrowData_ user borrow data packed uint256 from storage
    /// @param userBorrow_ current user borrow amount already extracted from `userBorrowData_`
    /// @return currentBorrowLimit_ current borrow limit updated for expansion since last interaction. returned value is in
    ///                             raw for with interest mode, normal amount for interest free mode!
    function calcBorrowLimitBeforeOperate(
        uint256 userBorrowData_,
        uint256 userBorrow_
    ) internal view returns (uint256 currentBorrowLimit_) {
        // @dev must support handling the case where timestamp is 0 (config is set but no interactions yet) -> base limit.
        // first tx where timestamp is 0 will enter `if (maxExpandedBorrowLimit_ < baseBorrowLimit_)` because `userBorrow_` and thus
        // `maxExpansionLimit_` and thus `maxExpandedBorrowLimit_` is 0 and `baseBorrowLimit_` can not be 0.
        // temp_ = extract borrow expand percent (is in 1e2 decimals)
        uint256 temp_ = (userBorrowData_ >> DexSlotsLink.BITS_USER_BORROW_EXPAND_PERCENT) & X14;
        uint256 maxExpansionLimit_;
        uint256 maxExpandedBorrowLimit_;
        unchecked {
            // calculate max expansion limit: Max amount limit can expand to since last interaction
            // userBorrow_ needs to be atleast 1e73 to overflow max limit of ~1e77 in uint256 (no token in existence where this is possible).
            maxExpansionLimit_ = ((userBorrow_ * temp_) / FOUR_DECIMALS);
            // calculate max borrow limit: Max point limit can increase to since last interaction
            maxExpandedBorrowLimit_ = userBorrow_ + maxExpansionLimit_;
        }
        // currentBorrowLimit_ = extract base borrow limit
        currentBorrowLimit_ = (userBorrowData_ >> DexSlotsLink.BITS_USER_BORROW_BASE_BORROW_LIMIT) & X18;
        currentBorrowLimit_ =
            (currentBorrowLimit_ >> DEFAULT_EXPONENT_SIZE) <<
            (currentBorrowLimit_ & DEFAULT_EXPONENT_MASK);
        if (maxExpandedBorrowLimit_ < currentBorrowLimit_) {
            return currentBorrowLimit_;
        }
        // time elapsed since last borrow limit was set (in seconds)
        unchecked {
            // temp_ = timeElapsed_ (last timestamp can not be > current timestamp)
            temp_ = block.timestamp - ((userBorrowData_ >> DexSlotsLink.BITS_USER_BORROW_LAST_UPDATE_TIMESTAMP) & X33); // extract last update timestamp
        }
        // currentBorrowLimit_ = expandedBorrowableAmount + extract last set borrow limit
        currentBorrowLimit_ =
            // calculate borrow limit expansion since last interaction for `expandPercent` that is elapsed of `expandDuration`.
            // divisor is extract expand duration (after this, full expansion to expandPercentage happened).
            ((maxExpansionLimit_ * temp_) /
                ((userBorrowData_ >> DexSlotsLink.BITS_USER_BORROW_EXPAND_DURATION) & X24)) + // expand duration can never be 0
            //  extract last set borrow limit
            BigMathMinified.fromBigNumber(
                (userBorrowData_ >> DexSlotsLink.BITS_USER_BORROW_PREVIOUS_BORROW_LIMIT) & X64,
                DEFAULT_EXPONENT_SIZE,
                DEFAULT_EXPONENT_MASK
            );
        // if timeElapsed is bigger than expandDuration, new borrow limit would be > max expansion,
        // so set to `maxExpandedBorrowLimit_` in that case.
        // also covers the case where last process timestamp = 0 (timeElapsed would simply be very big)
        if (currentBorrowLimit_ > maxExpandedBorrowLimit_) {
            currentBorrowLimit_ = maxExpandedBorrowLimit_;
        }
        // temp_ = extract hard max borrow limit. Above this user can never borrow (not expandable above)
        temp_ = (userBorrowData_ >> DexSlotsLink.BITS_USER_BORROW_MAX_BORROW_LIMIT) & X18;
        temp_ = (temp_ >> DEFAULT_EXPONENT_SIZE) << (temp_ & DEFAULT_EXPONENT_MASK);
        if (currentBorrowLimit_ > temp_) {
            currentBorrowLimit_ = temp_;
        }
    }
    /// @dev calculates borrow limit after an operate execution:
    /// total amount user borrow can reach (not borrowable amount in current operation).
    /// i.e. if user has borrowed 50M and can still borrow 5M, this method returns the total 55M, not the borrowable amount 5M
    /// @param userBorrowData_ user borrow data packed uint256 from storage
    /// @param userBorrow_ current user borrow amount already extracted from `userBorrowData_` and added / subtracted with the executed operate amount
    /// @param newBorrowLimit_ current borrow limit updated for expansion since last interaction, result from `calcBorrowLimitBeforeOperate`
    /// @return borrowLimit_ updated borrow limit that should be written to storage.
    ///                      returned value is in raw for with interest mode, normal amount for interest free mode!
    function calcBorrowLimitAfterOperate(
        uint256 userBorrowData_,
        uint256 userBorrow_,
        uint256 newBorrowLimit_
    ) internal pure returns (uint256 borrowLimit_) {
        // temp_ = extract borrow expand percent
        uint256 temp_ = (userBorrowData_ >> DexSlotsLink.BITS_USER_BORROW_EXPAND_PERCENT) & X14; // (is in 1e2 decimals)
        unchecked {
            // borrowLimit_ = calculate maximum borrow limit at full expansion.
            // userBorrow_ needs to be at least 1e73 to overflow max limit of ~1e77 in uint256 (no token in existence where this is possible).
            borrowLimit_ = userBorrow_ + ((userBorrow_ * temp_) / FOUR_DECIMALS);
        }
        // temp_ = extract base borrow limit
        temp_ = (userBorrowData_ >> DexSlotsLink.BITS_USER_BORROW_BASE_BORROW_LIMIT) & X18;
        temp_ = (temp_ >> DEFAULT_EXPONENT_SIZE) << (temp_ & DEFAULT_EXPONENT_MASK);
        if (borrowLimit_ < temp_) {
            // below base limit, borrow limit is always base limit
            return temp_;
        }
        // temp_ = extract hard max borrow limit. Above this user can never borrow (not expandable above)
        temp_ = (userBorrowData_ >> DexSlotsLink.BITS_USER_BORROW_MAX_BORROW_LIMIT) & X18;
        temp_ = (temp_ >> DEFAULT_EXPONENT_SIZE) << (temp_ & DEFAULT_EXPONENT_MASK);
        // make sure fully expanded borrow limit is not above hard max borrow limit
        if (borrowLimit_ > temp_) {
            borrowLimit_ = temp_;
        }
        // if new borrow limit (from before operate) is > max borrow limit, set max borrow limit.
        // (e.g. on a repay shrinking instantly to fully expanded borrow limit from new borrow amount. shrinking is instant)
        if (newBorrowLimit_ > borrowLimit_) {
            return borrowLimit_;
        }
        return newBorrowLimit_;
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.21;
/// @notice library that helps in reading / working with storage slot data of Fluid Dex.
/// @dev as all data for Fluid Dex is internal, any data must be fetched directly through manual
/// slot reading through this library or, if gas usage is less important, through the FluidDexResolver.
library DexSlotsLink {
    /// @dev storage slot for variables at Dex
    uint256 internal constant DEX_VARIABLES_SLOT = 0;
    /// @dev storage slot for variables2 at Dex
    uint256 internal constant DEX_VARIABLES2_SLOT = 1;
    /// @dev storage slot for total supply shares at Dex
    uint256 internal constant DEX_TOTAL_SUPPLY_SHARES_SLOT = 2;
    /// @dev storage slot for user supply mapping at Dex
    uint256 internal constant DEX_USER_SUPPLY_MAPPING_SLOT = 3;
    /// @dev storage slot for total borrow shares at Dex
    uint256 internal constant DEX_TOTAL_BORROW_SHARES_SLOT = 4;
    /// @dev storage slot for user borrow mapping at Dex
    uint256 internal constant DEX_USER_BORROW_MAPPING_SLOT = 5;
    /// @dev storage slot for oracle mapping at Dex
    uint256 internal constant DEX_ORACLE_MAPPING_SLOT = 6;
    /// @dev storage slot for range and threshold shifts at Dex
    uint256 internal constant DEX_RANGE_THRESHOLD_SHIFTS_SLOT = 7;
    /// @dev storage slot for center price shift at Dex
    uint256 internal constant DEX_CENTER_PRICE_SHIFT_SLOT = 8;
    // --------------------------------
    // @dev stacked uint256 storage slots bits position data for each:
    // UserSupplyData
    uint256 internal constant BITS_USER_SUPPLY_ALLOWED = 0;
    uint256 internal constant BITS_USER_SUPPLY_AMOUNT = 1;
    uint256 internal constant BITS_USER_SUPPLY_PREVIOUS_WITHDRAWAL_LIMIT = 65;
    uint256 internal constant BITS_USER_SUPPLY_LAST_UPDATE_TIMESTAMP = 129;
    uint256 internal constant BITS_USER_SUPPLY_EXPAND_PERCENT = 162;
    uint256 internal constant BITS_USER_SUPPLY_EXPAND_DURATION = 176;
    uint256 internal constant BITS_USER_SUPPLY_BASE_WITHDRAWAL_LIMIT = 200;
    // UserBorrowData
    uint256 internal constant BITS_USER_BORROW_ALLOWED = 0;
    uint256 internal constant BITS_USER_BORROW_AMOUNT = 1;
    uint256 internal constant BITS_USER_BORROW_PREVIOUS_BORROW_LIMIT = 65;
    uint256 internal constant BITS_USER_BORROW_LAST_UPDATE_TIMESTAMP = 129;
    uint256 internal constant BITS_USER_BORROW_EXPAND_PERCENT = 162;
    uint256 internal constant BITS_USER_BORROW_EXPAND_DURATION = 176;
    uint256 internal constant BITS_USER_BORROW_BASE_BORROW_LIMIT = 200;
    uint256 internal constant BITS_USER_BORROW_MAX_BORROW_LIMIT = 218;
    // --------------------------------
    /// @notice Calculating the slot ID for Dex contract for single mapping at `slot_` for `key_`
    function calculateMappingStorageSlot(uint256 slot_, address key_) internal pure returns (bytes32) {
        return keccak256(abi.encode(key_, slot_));
    }
    /// @notice Calculating the slot ID for Dex contract for double mapping at `slot_` for `key1_` and `key2_`
    function calculateDoubleMappingStorageSlot(
        uint256 slot_,
        address key1_,
        address key2_
    ) internal pure returns (bytes32) {
        bytes32 intermediateSlot_ = keccak256(abi.encode(key1_, slot_));
        return keccak256(abi.encode(key2_, intermediateSlot_));
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.21;
library LibsErrorTypes {
    /***********************************|
    |         LiquidityCalcs            | 
    |__________________________________*/
    /// @notice thrown when supply or borrow exchange price is zero at calc token data (token not configured yet)
    uint256 internal constant LiquidityCalcs__ExchangePriceZero = 70001;
    /// @notice thrown when rate data is set to a version that is not implemented
    uint256 internal constant LiquidityCalcs__UnsupportedRateVersion = 70002;
    /// @notice thrown when the calculated borrow rate turns negative. This should never happen.
    uint256 internal constant LiquidityCalcs__BorrowRateNegative = 70003;
    /***********************************|
    |           SafeTransfer            | 
    |__________________________________*/
    /// @notice thrown when safe transfer from for an ERC20 fails
    uint256 internal constant SafeTransfer__TransferFromFailed = 71001;
    /// @notice thrown when safe transfer for an ERC20 fails
    uint256 internal constant SafeTransfer__TransferFailed = 71002;
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.21;
import { LibsErrorTypes as ErrorTypes } from "./errorTypes.sol";
import { LiquiditySlotsLink } from "./liquiditySlotsLink.sol";
import { BigMathMinified } from "./bigMathMinified.sol";
/// @notice implements calculation methods used for Fluid liquidity such as updated exchange prices,
/// borrow rate, withdrawal / borrow limits, revenue amount.
library LiquidityCalcs {
    error FluidLiquidityCalcsError(uint256 errorId_);
    /// @notice emitted if the calculated borrow rate surpassed max borrow rate (16 bits) and was capped at maximum value 65535
    event BorrowRateMaxCap();
    /// @dev constants as from Liquidity variables.sol
    uint256 internal constant EXCHANGE_PRICES_PRECISION = 1e12;
    /// @dev Ignoring leap years
    uint256 internal constant SECONDS_PER_YEAR = 365 days;
    // constants used for BigMath conversion from and to storage
    uint256 internal constant DEFAULT_EXPONENT_SIZE = 8;
    uint256 internal constant DEFAULT_EXPONENT_MASK = 0xFF;
    uint256 internal constant FOUR_DECIMALS = 1e4;
    uint256 internal constant TWELVE_DECIMALS = 1e12;
    uint256 internal constant X14 = 0x3fff;
    uint256 internal constant X15 = 0x7fff;
    uint256 internal constant X16 = 0xffff;
    uint256 internal constant X18 = 0x3ffff;
    uint256 internal constant X24 = 0xffffff;
    uint256 internal constant X33 = 0x1ffffffff;
    uint256 internal constant X64 = 0xffffffffffffffff;
    ///////////////////////////////////////////////////////////////////////////
    //////////                  CALC EXCHANGE PRICES                  /////////
    ///////////////////////////////////////////////////////////////////////////
    /// @dev calculates interest (exchange prices) for a token given its' exchangePricesAndConfig from storage.
    /// @param exchangePricesAndConfig_ exchange prices and config packed uint256 read from storage
    /// @return supplyExchangePrice_ updated supplyExchangePrice
    /// @return borrowExchangePrice_ updated borrowExchangePrice
    function calcExchangePrices(
        uint256 exchangePricesAndConfig_
    ) internal view returns (uint256 supplyExchangePrice_, uint256 borrowExchangePrice_) {
        // Extracting exchange prices
        supplyExchangePrice_ =
            (exchangePricesAndConfig_ >> LiquiditySlotsLink.BITS_EXCHANGE_PRICES_SUPPLY_EXCHANGE_PRICE) &
            X64;
        borrowExchangePrice_ =
            (exchangePricesAndConfig_ >> LiquiditySlotsLink.BITS_EXCHANGE_PRICES_BORROW_EXCHANGE_PRICE) &
            X64;
        if (supplyExchangePrice_ == 0 || borrowExchangePrice_ == 0) {
            revert FluidLiquidityCalcsError(ErrorTypes.LiquidityCalcs__ExchangePriceZero);
        }
        uint256 temp_ = exchangePricesAndConfig_ & X16; // temp_ = borrowRate
        unchecked {
            // last timestamp can not be > current timestamp
            uint256 secondsSinceLastUpdate_ = block.timestamp -
                ((exchangePricesAndConfig_ >> LiquiditySlotsLink.BITS_EXCHANGE_PRICES_LAST_TIMESTAMP) & X33);
            uint256 borrowRatio_ = (exchangePricesAndConfig_ >> LiquiditySlotsLink.BITS_EXCHANGE_PRICES_BORROW_RATIO) &
                X15;
            if (secondsSinceLastUpdate_ == 0 || temp_ == 0 || borrowRatio_ == 1) {
                // if no time passed, borrow rate is 0, or no raw borrowings: no exchange price update needed
                // (if borrowRatio_ == 1 means there is only borrowInterestFree, as first bit is 1 and rest is 0)
                return (supplyExchangePrice_, borrowExchangePrice_);
            }
            // calculate new borrow exchange price.
            // formula borrowExchangePriceIncrease: previous price * borrow rate * secondsSinceLastUpdate_.
            // nominator is max uint112 (uint64 * uint16 * uint32). Divisor can not be 0.
            borrowExchangePrice_ +=
                (borrowExchangePrice_ * temp_ * secondsSinceLastUpdate_) /
                (SECONDS_PER_YEAR * FOUR_DECIMALS);
            // FOR SUPPLY EXCHANGE PRICE:
            // all yield paid by borrowers (in mode with interest) goes to suppliers in mode with interest.
            // formula: previous price * supply rate * secondsSinceLastUpdate_.
            // where supply rate = (borrow rate  - revenueFee%) * ratioSupplyYield. And
            // ratioSupplyYield = utilization * supplyRatio * borrowRatio
            //
            // Example:
            // supplyRawInterest is 80, supplyInterestFree is 20. totalSupply is 100. BorrowedRawInterest is 50.
            // BorrowInterestFree is 10. TotalBorrow is 60. borrow rate 40%, revenueFee 10%.
            // yield is 10 (so half a year must have passed).
            // supplyRawInterest must become worth 89. totalSupply must become 109. BorrowedRawInterest must become 60.
            // borrowInterestFree must still be 10. supplyInterestFree still 20. totalBorrow 70.
            // supplyExchangePrice would have to go from 1 to 1,125 (+ 0.125). borrowExchangePrice from 1 to 1,2 (+0.2).
            // utilization is 60%. supplyRatio = 20 / 80 = 25% (only 80% of lenders receiving yield).
            // borrowRatio = 10 / 50 = 20% (only 83,333% of borrowers paying yield):
            // x of borrowers paying yield = 100% - (20 / (100 + 20)) = 100% - 16.6666666% = 83,333%.
            // ratioSupplyYield = 60% * 83,33333% * (100% + 20%) = 62,5%
            // supplyRate = (40% * (100% - 10%)) * = 36% * 62,5% = 22.5%
            // increase in supplyExchangePrice, assuming 100 as previous price.
            // 100 * 22,5% * 1/2 (half a year) = 0,1125.
            // cross-check supplyRawInterest worth = 80 * 1.1125 = 89. totalSupply worth = 89 + 20.
            // -------------- 1. calculate ratioSupplyYield --------------------------------
            // step1: utilization * supplyRatio (or actually part of lenders receiving yield)
            // temp_ => supplyRatio (in 1e2: 100% = 10_000; 1% = 100 -> max value 16_383)
            // if first bit 0 then ratio is supplyInterestFree / supplyWithInterest (supplyWithInterest is bigger)
            // else ratio is supplyWithInterest / supplyInterestFree (supplyInterestFree is bigger)
            temp_ = (exchangePricesAndConfig_ >> LiquiditySlotsLink.BITS_EXCHANGE_PRICES_SUPPLY_RATIO) & X15;
            if (temp_ == 1) {
                // if no raw supply: no exchange price update needed
                // (if supplyRatio_ == 1 means there is only supplyInterestFree, as first bit is 1 and rest is 0)
                return (supplyExchangePrice_, borrowExchangePrice_);
            }
            // ratioSupplyYield precision is 1e27 as 100% for increased precision when supplyInterestFree > supplyWithInterest
            if (temp_ & 1 == 1) {
                // ratio is supplyWithInterest / supplyInterestFree (supplyInterestFree is bigger)
                temp_ = temp_ >> 1;
                // Note: case where temp_ == 0 (only supplyInterestFree, no yield) already covered by early return
                // in the if statement a little above.
                // based on above example but supplyRawInterest is 20, supplyInterestFree is 80. no fee.
                // supplyRawInterest must become worth 30. totalSupply must become 110.
                // supplyExchangePrice would have to go from 1 to 1,5. borrowExchangePrice from 1 to 1,2.
                // so ratioSupplyYield must come out as 2.5 (250%).
                // supplyRatio would be (20 * 10_000 / 80) = 2500. but must be inverted.
                temp_ = (1e27 * FOUR_DECIMALS) / temp_; // e.g. 1e31 / 2500 = 4e27. (* 1e27 for precision)
                // e.g. 5_000 * (1e27 + 4e27) / 1e27 = 25_000 (=250%).
                temp_ =
                    // utilization * (100% + 100% / supplyRatio)
                    (((exchangePricesAndConfig_ >> LiquiditySlotsLink.BITS_EXCHANGE_PRICES_UTILIZATION) & X14) *
                        (1e27 + temp_)) / // extract utilization (max 16_383 so there is no way this can overflow).
                    (FOUR_DECIMALS);
                // max possible value of temp_ here is 16383 * (1e27 + 1e31) / 1e4 = ~1.64e31
            } else {
                // ratio is supplyInterestFree / supplyWithInterest (supplyWithInterest is bigger)
                temp_ = temp_ >> 1;
                // if temp_ == 0 then only supplyWithInterest => full yield. temp_ is already 0
                // e.g. 5_000 * 10_000 + (20 * 10_000 / 80) / 10_000 = 5000 * 12500 / 10000 = 6250 (=62.5%).
                temp_ =
                    // 1e27 * utilization * (100% + supplyRatio) / 100%
                    (1e27 *
                        ((exchangePricesAndConfig_ >> LiquiditySlotsLink.BITS_EXCHANGE_PRICES_UTILIZATION) & X14) * // extract utilization (max 16_383 so there is no way this can overflow).
                        (FOUR_DECIMALS + temp_)) /
                    (FOUR_DECIMALS * FOUR_DECIMALS);
                // max possible temp_ value: 1e27 * 16383 * 2e4 / 1e8 = 3.2766e27
            }
            // from here temp_ => ratioSupplyYield (utilization * supplyRatio part) scaled by 1e27. max possible value ~1.64e31
            // step2 of ratioSupplyYield: add borrowRatio (only x% of borrowers paying yield)
            if (borrowRatio_ & 1 == 1) {
                // ratio is borrowWithInterest / borrowInterestFree (borrowInterestFree is bigger)
                borrowRatio_ = borrowRatio_ >> 1;
                // borrowRatio_ => x of total bororwers paying yield. scale to 1e27.
                // Note: case where borrowRatio_ == 0 (only borrowInterestFree, no yield) already covered
                // at the beginning of the method by early return if `borrowRatio_ == 1`.
                // based on above example but borrowRawInterest is 10, borrowInterestFree is 50. no fee. borrowRatio = 20%.
                // so only 16.66% of borrowers are paying yield. so the 100% - part of the formula is not needed.
                // x of borrowers paying yield = (borrowRatio / (100 + borrowRatio)) = 16.6666666%
                // borrowRatio_ => x of total bororwers paying yield. scale to 1e27.
                borrowRatio_ = (borrowRatio_ * 1e27) / (FOUR_DECIMALS + borrowRatio_);
                // max value here for borrowRatio_ is (1e31 / (1e4 + 1e4))= 5e26 (= 50% of borrowers paying yield).
            } else {
                // ratio is borrowInterestFree / borrowWithInterest (borrowWithInterest is bigger)
                borrowRatio_ = borrowRatio_ >> 1;
                // borrowRatio_ => x of total bororwers paying yield. scale to 1e27.
                // x of borrowers paying yield = 100% - (borrowRatio / (100 + borrowRatio)) = 100% - 16.6666666% = 83,333%.
                borrowRatio_ = (1e27 - ((borrowRatio_ * 1e27) / (FOUR_DECIMALS + borrowRatio_)));
                // borrowRatio can never be > 100%. so max subtraction can be 100% - 100% / 200%.
                // or if borrowRatio_ is 0 -> 100% - 0. or if borrowRatio_ is 1 -> 100% - 1 / 101.
                // max value here for borrowRatio_ is 1e27 - 0 = 1e27 (= 100% of borrowers paying yield).
            }
            // temp_ => ratioSupplyYield. scaled down from 1e25 = 1% each to normal percent precision 1e2 = 1%.
            // max nominator value is ~1.64e31 * 1e27 = 1.64e58. max result = 1.64e8
            temp_ = (FOUR_DECIMALS * temp_ * borrowRatio_) / 1e54;
            // 2. calculate supply rate
            // temp_ => supply rate (borrow rate  - revenueFee%) * ratioSupplyYield.
            // division part is done in next step to increase precision. (divided by 2x FOUR_DECIMALS, fee + borrowRate)
            // Note that all calculation divisions for supplyExchangePrice are rounded down.
            // Note supply rate can be bigger than the borrowRate, e.g. if there are only few lenders with interest
            // but more suppliers not earning interest.
            temp_ = ((exchangePricesAndConfig_ & X16) * // borrow rate
                temp_ * // ratioSupplyYield
                (FOUR_DECIMALS - ((exchangePricesAndConfig_ >> LiquiditySlotsLink.BITS_EXCHANGE_PRICES_FEE) & X14))); // revenueFee
            // fee can not be > 100%. max possible = 65535 * ~1.64e8 * 1e4 =~1.074774e17.
            // 3. calculate increase in supply exchange price
            supplyExchangePrice_ += ((supplyExchangePrice_ * temp_ * secondsSinceLastUpdate_) /
                (SECONDS_PER_YEAR * FOUR_DECIMALS * FOUR_DECIMALS * FOUR_DECIMALS));
            // max possible nominator = max uint 64 * 1.074774e17 * max uint32 = ~8.52e45. Denominator can not be 0.
        }
    }
    ///////////////////////////////////////////////////////////////////////////
    //////////                     CALC REVENUE                       /////////
    ///////////////////////////////////////////////////////////////////////////
    /// @dev gets the `revenueAmount_` for a token given its' totalAmounts and exchangePricesAndConfig from storage
    /// and the current balance of the Fluid liquidity contract for the token.
    /// @param totalAmounts_ total amounts packed uint256 read from storage
    /// @param exchangePricesAndConfig_ exchange prices and config packed uint256 read from storage
    /// @param liquidityTokenBalance_   current balance of Liquidity contract (IERC20(token_).balanceOf(address(this)))
    /// @return revenueAmount_ collectable revenue amount
    function calcRevenue(
        uint256 totalAmounts_,
        uint256 exchangePricesAndConfig_,
        uint256 liquidityTokenBalance_
    ) internal view returns (uint256 revenueAmount_) {
        // @dev no need to super-optimize this method as it is only used by admin
        // calculate the new exchange prices based on earned interest
        (uint256 supplyExchangePrice_, uint256 borrowExchangePrice_) = calcExchangePrices(exchangePricesAndConfig_);
        // total supply = interest free + with interest converted from raw
        uint256 totalSupply_ = getTotalSupply(totalAmounts_, supplyExchangePrice_);
        if (totalSupply_ > 0) {
            // available revenue: balanceOf(token) + totalBorrowings - totalLendings.
            revenueAmount_ = liquidityTokenBalance_ + getTotalBorrow(totalAmounts_, borrowExchangePrice_);
            // ensure there is no possible case because of rounding etc. where this would revert,
            // explicitly check if >
            revenueAmount_ = revenueAmount_ > totalSupply_ ? revenueAmount_ - totalSupply_ : 0;
            // Note: if utilization > 100% (totalSupply < totalBorrow), then all the amount above 100% utilization
            // can only be revenue.
        } else {
            // if supply is 0, then rest of balance can be withdrawn as revenue so that no amounts get stuck
            revenueAmount_ = liquidityTokenBalance_;
        }
    }
    ///////////////////////////////////////////////////////////////////////////
    //////////                      CALC LIMITS                       /////////
    ///////////////////////////////////////////////////////////////////////////
    /// @dev calculates withdrawal limit before an operate execution:
    /// amount of user supply that must stay supplied (not amount that can be withdrawn).
    /// i.e. if user has supplied 100m and can withdraw 5M, this method returns the 95M, not the withdrawable amount 5M
    /// @param userSupplyData_ user supply data packed uint256 from storage
    /// @param userSupply_ current user supply amount already extracted from `userSupplyData_` and converted from BigMath
    /// @return currentWithdrawalLimit_ current withdrawal limit updated for expansion since last interaction.
    ///         returned value is in raw for with interest mode, normal amount for interest free mode!
    function calcWithdrawalLimitBeforeOperate(
        uint256 userSupplyData_,
        uint256 userSupply_
    ) internal view returns (uint256 currentWithdrawalLimit_) {
        // @dev must support handling the case where timestamp is 0 (config is set but no interactions yet).
        // first tx where timestamp is 0 will enter `if (lastWithdrawalLimit_ == 0)` because lastWithdrawalLimit_ is not set yet.
        // returning max withdrawal allowed, which is not exactly right but doesn't matter because the first interaction must be
        // a deposit anyway. Important is that it would not revert.
        // Note the first time a deposit brings the user supply amount to above the base withdrawal limit, the active limit
        // is the fully expanded limit immediately.
        // extract last set withdrawal limit
        uint256 lastWithdrawalLimit_ = (userSupplyData_ >>
            LiquiditySlotsLink.BITS_USER_SUPPLY_PREVIOUS_WITHDRAWAL_LIMIT) & X64;
        lastWithdrawalLimit_ =
            (lastWithdrawalLimit_ >> DEFAULT_EXPONENT_SIZE) <<
            (lastWithdrawalLimit_ & DEFAULT_EXPONENT_MASK);
        if (lastWithdrawalLimit_ == 0) {
            // withdrawal limit is not activated. Max withdrawal allowed
            return 0;
        }
        uint256 maxWithdrawableLimit_;
        uint256 temp_;
        unchecked {
            // extract max withdrawable percent of user supply and
            // calculate maximum withdrawable amount expandPercentage of user supply at full expansion duration elapsed
            // e.g.: if 10% expandPercentage, meaning 10% is withdrawable after full expandDuration has elapsed.
            // userSupply_ needs to be atleast 1e73 to overflow max limit of ~1e77 in uint256 (no token in existence where this is possible).
            maxWithdrawableLimit_ =
                (((userSupplyData_ >> LiquiditySlotsLink.BITS_USER_SUPPLY_EXPAND_PERCENT) & X14) * userSupply_) /
                FOUR_DECIMALS;
            // time elapsed since last withdrawal limit was set (in seconds)
            // @dev last process timestamp is guaranteed to exist for withdrawal, as a supply must have happened before.
            // last timestamp can not be > current timestamp
            temp_ =
                block.timestamp -
                ((userSupplyData_ >> LiquiditySlotsLink.BITS_USER_SUPPLY_LAST_UPDATE_TIMESTAMP) & X33);
        }
        // calculate withdrawable amount of expandPercent that is elapsed of expandDuration.
        // e.g. if 60% of expandDuration has elapsed, then user should be able to withdraw 6% of user supply, down to 94%.
        // Note: no explicit check for this needed, it is covered by setting minWithdrawalLimit_ if needed.
        temp_ =
            (maxWithdrawableLimit_ * temp_) /
            // extract expand duration: After this, decrement won't happen (user can withdraw 100% of withdraw limit)
            ((userSupplyData_ >> LiquiditySlotsLink.BITS_USER_SUPPLY_EXPAND_DURATION) & X24); // expand duration can never be 0
        // calculate expanded withdrawal limit: last withdrawal limit - withdrawable amount.
        // Note: withdrawable amount here can grow bigger than userSupply if timeElapsed is a lot bigger than expandDuration,
        // which would cause the subtraction `lastWithdrawalLimit_ - withdrawableAmount_` to revert. In that case, set 0
        // which will cause minimum (fully expanded) withdrawal limit to be set in lines below.
        unchecked {
            // underflow explicitly checked & handled
            currentWithdrawalLimit_ = lastWithdrawalLimit_ > temp_ ? lastWithdrawalLimit_ - temp_ : 0;
            // calculate minimum withdrawal limit: minimum amount of user supply that must stay supplied at full expansion.
            // subtraction can not underflow as maxWithdrawableLimit_ is a percentage amount (<=100%) of userSupply_
            temp_ = userSupply_ - maxWithdrawableLimit_;
        }
        // if withdrawal limit is decreased below minimum then set minimum
        // (e.g. when more than expandDuration time has elapsed)
        if (temp_ > currentWithdrawalLimit_) {
            currentWithdrawalLimit_ = temp_;
        }
    }
    /// @dev calculates withdrawal limit after an operate execution:
    /// amount of user supply that must stay supplied (not amount that can be withdrawn).
    /// i.e. if user has supplied 100m and can withdraw 5M, this method returns the 95M, not the withdrawable amount 5M
    /// @param userSupplyData_ user supply data packed uint256 from storage
    /// @param userSupply_ current user supply amount already extracted from `userSupplyData_` and added / subtracted with the executed operate amount
    /// @param newWithdrawalLimit_ current withdrawal limit updated for expansion since last interaction, result from `calcWithdrawalLimitBeforeOperate`
    /// @return withdrawalLimit_ updated withdrawal limit that should be written to storage. returned value is in
    ///                          raw for with interest mode, normal amount for interest free mode!
    function calcWithdrawalLimitAfterOperate(
        uint256 userSupplyData_,
        uint256 userSupply_,
        uint256 newWithdrawalLimit_
    ) internal pure returns (uint256) {
        // temp_ => base withdrawal limit. below this, maximum withdrawals are allowed
        uint256 temp_ = (userSupplyData_ >> LiquiditySlotsLink.BITS_USER_SUPPLY_BASE_WITHDRAWAL_LIMIT) & X18;
        temp_ = (temp_ >> DEFAULT_EXPONENT_SIZE) << (temp_ & DEFAULT_EXPONENT_MASK);
        // if user supply is below base limit then max withdrawals are allowed
        if (userSupply_ < temp_) {
            return 0;
        }
        // temp_ => withdrawal limit expandPercent (is in 1e2 decimals)
        temp_ = (userSupplyData_ >> LiquiditySlotsLink.BITS_USER_SUPPLY_EXPAND_PERCENT) & X14;
        unchecked {
            // temp_ => minimum withdrawal limit: userSupply - max withdrawable limit (userSupply * expandPercent))
            // userSupply_ needs to be atleast 1e73 to overflow max limit of ~1e77 in uint256 (no token in existence where this is possible).
            // subtraction can not underflow as maxWithdrawableLimit_ is a percentage amount (<=100%) of userSupply_
            temp_ = userSupply_ - ((userSupply_ * temp_) / FOUR_DECIMALS);
        }
        // if new (before operation) withdrawal limit is less than minimum limit then set minimum limit.
        // e.g. can happen on new deposits. withdrawal limit is instantly fully expanded in a scenario where
        // increased deposit amount outpaces withrawals.
        if (temp_ > newWithdrawalLimit_) {
            return temp_;
        }
        return newWithdrawalLimit_;
    }
    /// @dev calculates borrow limit before an operate execution:
    /// total amount user borrow can reach (not borrowable amount in current operation).
    /// i.e. if user has borrowed 50M and can still borrow 5M, this method returns the total 55M, not the borrowable amount 5M
    /// @param userBorrowData_ user borrow data packed uint256 from storage
    /// @param userBorrow_ current user borrow amount already extracted from `userBorrowData_`
    /// @return currentBorrowLimit_ current borrow limit updated for expansion since last interaction. returned value is in
    ///                             raw for with interest mode, normal amount for interest free mode!
    function calcBorrowLimitBeforeOperate(
        uint256 userBorrowData_,
        uint256 userBorrow_
    ) internal view returns (uint256 currentBorrowLimit_) {
        // @dev must support handling the case where timestamp is 0 (config is set but no interactions yet) -> base limit.
        // first tx where timestamp is 0 will enter `if (maxExpandedBorrowLimit_ < baseBorrowLimit_)` because `userBorrow_` and thus
        // `maxExpansionLimit_` and thus `maxExpandedBorrowLimit_` is 0 and `baseBorrowLimit_` can not be 0.
        // temp_ = extract borrow expand percent (is in 1e2 decimals)
        uint256 temp_ = (userBorrowData_ >> LiquiditySlotsLink.BITS_USER_BORROW_EXPAND_PERCENT) & X14;
        uint256 maxExpansionLimit_;
        uint256 maxExpandedBorrowLimit_;
        unchecked {
            // calculate max expansion limit: Max amount limit can expand to since last interaction
            // userBorrow_ needs to be atleast 1e73 to overflow max limit of ~1e77 in uint256 (no token in existence where this is possible).
            maxExpansionLimit_ = ((userBorrow_ * temp_) / FOUR_DECIMALS);
            // calculate max borrow limit: Max point limit can increase to since last interaction
            maxExpandedBorrowLimit_ = userBorrow_ + maxExpansionLimit_;
        }
        // currentBorrowLimit_ = extract base borrow limit
        currentBorrowLimit_ = (userBorrowData_ >> LiquiditySlotsLink.BITS_USER_BORROW_BASE_BORROW_LIMIT) & X18;
        currentBorrowLimit_ =
            (currentBorrowLimit_ >> DEFAULT_EXPONENT_SIZE) <<
            (currentBorrowLimit_ & DEFAULT_EXPONENT_MASK);
        if (maxExpandedBorrowLimit_ < currentBorrowLimit_) {
            return currentBorrowLimit_;
        }
        // time elapsed since last borrow limit was set (in seconds)
        unchecked {
            // temp_ = timeElapsed_ (last timestamp can not be > current timestamp)
            temp_ =
                block.timestamp -
                ((userBorrowData_ >> LiquiditySlotsLink.BITS_USER_BORROW_LAST_UPDATE_TIMESTAMP) & X33); // extract last update timestamp
        }
        // currentBorrowLimit_ = expandedBorrowableAmount + extract last set borrow limit
        currentBorrowLimit_ =
            // calculate borrow limit expansion since last interaction for `expandPercent` that is elapsed of `expandDuration`.
            // divisor is extract expand duration (after this, full expansion to expandPercentage happened).
            ((maxExpansionLimit_ * temp_) /
                ((userBorrowData_ >> LiquiditySlotsLink.BITS_USER_BORROW_EXPAND_DURATION) & X24)) + // expand duration can never be 0
            //  extract last set borrow limit
            BigMathMinified.fromBigNumber(
                (userBorrowData_ >> LiquiditySlotsLink.BITS_USER_BORROW_PREVIOUS_BORROW_LIMIT) & X64,
                DEFAULT_EXPONENT_SIZE,
                DEFAULT_EXPONENT_MASK
            );
        // if timeElapsed is bigger than expandDuration, new borrow limit would be > max expansion,
        // so set to `maxExpandedBorrowLimit_` in that case.
        // also covers the case where last process timestamp = 0 (timeElapsed would simply be very big)
        if (currentBorrowLimit_ > maxExpandedBorrowLimit_) {
            currentBorrowLimit_ = maxExpandedBorrowLimit_;
        }
        // temp_ = extract hard max borrow limit. Above this user can never borrow (not expandable above)
        temp_ = (userBorrowData_ >> LiquiditySlotsLink.BITS_USER_BORROW_MAX_BORROW_LIMIT) & X18;
        temp_ = (temp_ >> DEFAULT_EXPONENT_SIZE) << (temp_ & DEFAULT_EXPONENT_MASK);
        if (currentBorrowLimit_ > temp_) {
            currentBorrowLimit_ = temp_;
        }
    }
    /// @dev calculates borrow limit after an operate execution:
    /// total amount user borrow can reach (not borrowable amount in current operation).
    /// i.e. if user has borrowed 50M and can still borrow 5M, this method returns the total 55M, not the borrowable amount 5M
    /// @param userBorrowData_ user borrow data packed uint256 from storage
    /// @param userBorrow_ current user borrow amount already extracted from `userBorrowData_` and added / subtracted with the executed operate amount
    /// @param newBorrowLimit_ current borrow limit updated for expansion since last interaction, result from `calcBorrowLimitBeforeOperate`
    /// @return borrowLimit_ updated borrow limit that should be written to storage.
    ///                      returned value is in raw for with interest mode, normal amount for interest free mode!
    function calcBorrowLimitAfterOperate(
        uint256 userBorrowData_,
        uint256 userBorrow_,
        uint256 newBorrowLimit_
    ) internal pure returns (uint256 borrowLimit_) {
        // temp_ = extract borrow expand percent
        uint256 temp_ = (userBorrowData_ >> LiquiditySlotsLink.BITS_USER_BORROW_EXPAND_PERCENT) & X14; // (is in 1e2 decimals)
        unchecked {
            // borrowLimit_ = calculate maximum borrow limit at full expansion.
            // userBorrow_ needs to be at least 1e73 to overflow max limit of ~1e77 in uint256 (no token in existence where this is possible).
            borrowLimit_ = userBorrow_ + ((userBorrow_ * temp_) / FOUR_DECIMALS);
        }
        // temp_ = extract base borrow limit
        temp_ = (userBorrowData_ >> LiquiditySlotsLink.BITS_USER_BORROW_BASE_BORROW_LIMIT) & X18;
        temp_ = (temp_ >> DEFAULT_EXPONENT_SIZE) << (temp_ & DEFAULT_EXPONENT_MASK);
        if (borrowLimit_ < temp_) {
            // below base limit, borrow limit is always base limit
            return temp_;
        }
        // temp_ = extract hard max borrow limit. Above this user can never borrow (not expandable above)
        temp_ = (userBorrowData_ >> LiquiditySlotsLink.BITS_USER_BORROW_MAX_BORROW_LIMIT) & X18;
        temp_ = (temp_ >> DEFAULT_EXPONENT_SIZE) << (temp_ & DEFAULT_EXPONENT_MASK);
        // make sure fully expanded borrow limit is not above hard max borrow limit
        if (borrowLimit_ > temp_) {
            borrowLimit_ = temp_;
        }
        // if new borrow limit (from before operate) is > max borrow limit, set max borrow limit.
        // (e.g. on a repay shrinking instantly to fully expanded borrow limit from new borrow amount. shrinking is instant)
        if (newBorrowLimit_ > borrowLimit_) {
            return borrowLimit_;
        }
        return newBorrowLimit_;
    }
    ///////////////////////////////////////////////////////////////////////////
    //////////                      CALC RATES                        /////////
    ///////////////////////////////////////////////////////////////////////////
    /// @dev Calculates new borrow rate from utilization for a token
    /// @param rateData_ rate data packed uint256 from storage for the token
    /// @param utilization_ totalBorrow / totalSupply. 1e4 = 100% utilization
    /// @return rate_ rate for that particular token in 1e2 precision (e.g. 5% rate = 500)
    function calcBorrowRateFromUtilization(uint256 rateData_, uint256 utilization_) internal returns (uint256 rate_) {
        // extract rate version: 4 bits (0xF) starting from bit 0
        uint256 rateVersion_ = (rateData_ & 0xF);
        if (rateVersion_ == 1) {
            rate_ = calcRateV1(rateData_, utilization_);
        } else if (rateVersion_ == 2) {
            rate_ = calcRateV2(rateData_, utilization_);
        } else {
            revert FluidLiquidityCalcsError(ErrorTypes.LiquidityCalcs__UnsupportedRateVersion);
        }
        if (rate_ > X16) {
            // hard cap for borrow rate at maximum value 16 bits (65535) to make sure it does not overflow storage space.
            // this is unlikely to ever happen if configs stay within expected levels.
            rate_ = X16;
            // emit event to more easily become aware
            emit BorrowRateMaxCap();
        }
    }
    /// @dev calculates the borrow rate based on utilization for rate data version 1 (with one kink) in 1e2 precision
    /// @param rateData_ rate data packed uint256 from storage for the token
    /// @param utilization_  in 1e2 (100% = 1e4)
    /// @return rate_ rate in 1e2 precision
    function calcRateV1(uint256 rateData_, uint256 utilization_) internal pure returns (uint256 rate_) {
        /// For rate v1 (one kink) ------------------------------------------------------
        /// Next 16  bits =>  4 - 19 => Rate at utilization 0% (in 1e2: 100% = 10_000; 1% = 100 -> max value 65535)
        /// Next 16  bits =>  20- 35 => Utilization at kink1 (in 1e2: 100% = 10_000; 1% = 100 -> max value 65535)
        /// Next 16  bits =>  36- 51 => Rate at utilization kink1 (in 1e2: 100% = 10_000; 1% = 100 -> max value 65535)
        /// Next 16  bits =>  52- 67 => Rate at utilization 100% (in 1e2: 100% = 10_000; 1% = 100 -> max value 65535)
        /// Last 188 bits =>  68-255 => blank, might come in use in future
        // y = mx + c.
        // y is borrow rate
        // x is utilization
        // m = slope (m can also be negative for declining rates)
        // c is constant (c can be negative)
        uint256 y1_;
        uint256 y2_;
        uint256 x1_;
        uint256 x2_;
        // extract kink1: 16 bits (0xFFFF) starting from bit 20
        // kink is in 1e2, same as utilization, so no conversion needed for direct comparison of the two
        uint256 kink1_ = (rateData_ >> LiquiditySlotsLink.BITS_RATE_DATA_V1_UTILIZATION_AT_KINK) & X16;
        if (utilization_ < kink1_) {
            // if utilization is less than kink
            y1_ = (rateData_ >> LiquiditySlotsLink.BITS_RATE_DATA_V1_RATE_AT_UTILIZATION_ZERO) & X16;
            y2_ = (rateData_ >> LiquiditySlotsLink.BITS_RATE_DATA_V1_RATE_AT_UTILIZATION_KINK) & X16;
            x1_ = 0; // 0%
            x2_ = kink1_;
        } else {
            // else utilization is greater than kink
            y1_ = (rateData_ >> LiquiditySlotsLink.BITS_RATE_DATA_V1_RATE_AT_UTILIZATION_KINK) & X16;
            y2_ = (rateData_ >> LiquiditySlotsLink.BITS_RATE_DATA_V1_RATE_AT_UTILIZATION_MAX) & X16;
            x1_ = kink1_;
            x2_ = FOUR_DECIMALS; // 100%
        }
        int256 constant_;
        int256 slope_;
        unchecked {
            // calculating slope with twelve decimal precision. m = (y2 - y1) / (x2 - x1).
            // utilization of x2 can not be <= utilization of x1 (so no underflow or 0 divisor)
            // y is in 1e2 so can not overflow when multiplied with TWELVE_DECIMALS
            slope_ = (int256(y2_ - y1_) * int256(TWELVE_DECIMALS)) / int256((x2_ - x1_));
            // calculating constant at 12 decimal precision. slope is already in 12 decimal hence only multiple with y1. c = y - mx.
            // maximum y1_ value is 65535. 65535 * 1e12 can not overflow int256
            // maximum slope is 65535 - 0 * TWELVE_DECIMALS / 1 = 65535 * 1e12;
            // maximum x1_ is 100% (9_999 actually) => slope_ * x1_ can not overflow int256
            // subtraction most extreme case would be  0 - max value slope_ * x1_ => can not underflow int256
            constant_ = int256(y1_ * TWELVE_DECIMALS) - (slope_ * int256(x1_));
            // calculating new borrow rate
            // - slope_ max value is 65535 * 1e12,
            // - utilization max value is let's say 500% (extreme case where borrow rate increases borrow amount without new supply)
            // - constant max value is 65535 * 1e12
            // so max values are 65535 * 1e12 * 50_000 + 65535 * 1e12 -> 3.2768*10^21, which easily fits int256
            // divisor TWELVE_DECIMALS can not be 0
            slope_ = (slope_ * int256(utilization_)) + constant_; // reusing `slope_` as variable for gas savings
            if (slope_ < 0) {
                revert FluidLiquidityCalcsError(ErrorTypes.LiquidityCalcs__BorrowRateNegative);
            }
            rate_ = uint256(slope_) / TWELVE_DECIMALS;
        }
    }
    /// @dev calculates the borrow rate based on utilization for rate data version 2 (with two kinks) in 1e4 precision
    /// @param rateData_ rate data packed uint256 from storage for the token
    /// @param utilization_  in 1e2 (100% = 1e4)
    /// @return rate_ rate in 1e4 precision
    function calcRateV2(uint256 rateData_, uint256 utilization_) internal pure returns (uint256 rate_) {
        /// For rate v2 (two kinks) -----------------------------------------------------
        /// Next 16  bits =>  4 - 19 => Rate at utilization 0% (in 1e2: 100% = 10_000; 1% = 100 -> max value 65535)
        /// Next 16  bits =>  20- 35 => Utilization at kink1 (in 1e2: 100% = 10_000; 1% = 100 -> max value 65535)
        /// Next 16  bits =>  36- 51 => Rate at utilization kink1 (in 1e2: 100% = 10_000; 1% = 100 -> max value 65535)
        /// Next 16  bits =>  52- 67 => Utilization at kink2 (in 1e2: 100% = 10_000; 1% = 100 -> max value 65535)
        /// Next 16  bits =>  68- 83 => Rate at utilization kink2 (in 1e2: 100% = 10_000; 1% = 100 -> max value 65535)
        /// Next 16  bits =>  84- 99 => Rate at utilization 100% (in 1e2: 100% = 10_000; 1% = 100 -> max value 65535)
        /// Last 156 bits => 100-255 => blank, might come in use in future
        // y = mx + c.
        // y is borrow rate
        // x is utilization
        // m = slope (m can also be negative for declining rates)
        // c is constant (c can be negative)
        uint256 y1_;
        uint256 y2_;
        uint256 x1_;
        uint256 x2_;
        // extract kink1: 16 bits (0xFFFF) starting from bit 20
        // kink is in 1e2, same as utilization, so no conversion needed for direct comparison of the two
        uint256 kink1_ = (rateData_ >> LiquiditySlotsLink.BITS_RATE_DATA_V2_UTILIZATION_AT_KINK1) & X16;
        if (utilization_ < kink1_) {
            // if utilization is less than kink1
            y1_ = (rateData_ >> LiquiditySlotsLink.BITS_RATE_DATA_V2_RATE_AT_UTILIZATION_ZERO) & X16;
            y2_ = (rateData_ >> LiquiditySlotsLink.BITS_RATE_DATA_V2_RATE_AT_UTILIZATION_KINK1) & X16;
            x1_ = 0; // 0%
            x2_ = kink1_;
        } else {
            // extract kink2: 16 bits (0xFFFF) starting from bit 52
            uint256 kink2_ = (rateData_ >> LiquiditySlotsLink.BITS_RATE_DATA_V2_UTILIZATION_AT_KINK2) & X16;
            if (utilization_ < kink2_) {
                // if utilization is less than kink2
                y1_ = (rateData_ >> LiquiditySlotsLink.BITS_RATE_DATA_V2_RATE_AT_UTILIZATION_KINK1) & X16;
                y2_ = (rateData_ >> LiquiditySlotsLink.BITS_RATE_DATA_V2_RATE_AT_UTILIZATION_KINK2) & X16;
                x1_ = kink1_;
                x2_ = kink2_;
            } else {
                // else utilization is greater than kink2
                y1_ = (rateData_ >> LiquiditySlotsLink.BITS_RATE_DATA_V2_RATE_AT_UTILIZATION_KINK2) & X16;
                y2_ = (rateData_ >> LiquiditySlotsLink.BITS_RATE_DATA_V2_RATE_AT_UTILIZATION_MAX) & X16;
                x1_ = kink2_;
                x2_ = FOUR_DECIMALS;
            }
        }
        int256 constant_;
        int256 slope_;
        unchecked {
            // calculating slope with twelve decimal precision. m = (y2 - y1) / (x2 - x1).
            // utilization of x2 can not be <= utilization of x1 (so no underflow or 0 divisor)
            // y is in 1e2 so can not overflow when multiplied with TWELVE_DECIMALS
            slope_ = (int256(y2_ - y1_) * int256(TWELVE_DECIMALS)) / int256((x2_ - x1_));
            // calculating constant at 12 decimal precision. slope is already in 12 decimal hence only multiple with y1. c = y - mx.
            // maximum y1_ value is 65535. 65535 * 1e12 can not overflow int256
            // maximum slope is 65535 - 0 * TWELVE_DECIMALS / 1 = 65535 * 1e12;
            // maximum x1_ is 100% (9_999 actually) => slope_ * x1_ can not overflow int256
            // subtraction most extreme case would be  0 - max value slope_ * x1_ => can not underflow int256
            constant_ = int256(y1_ * TWELVE_DECIMALS) - (slope_ * int256(x1_));
            // calculating new borrow rate
            // - slope_ max value is 65535 * 1e12,
            // - utilization max value is let's say 500% (extreme case where borrow rate increases borrow amount without new supply)
            // - constant max value is 65535 * 1e12
            // so max values are 65535 * 1e12 * 50_000 + 65535 * 1e12 -> 3.2768*10^21, which easily fits int256
            // divisor TWELVE_DECIMALS can not be 0
            slope_ = (slope_ * int256(utilization_)) + constant_; // reusing `slope_` as variable for gas savings
            if (slope_ < 0) {
                revert FluidLiquidityCalcsError(ErrorTypes.LiquidityCalcs__BorrowRateNegative);
            }
            rate_ = uint256(slope_) / TWELVE_DECIMALS;
        }
    }
    /// @dev reads the total supply out of Liquidity packed storage `totalAmounts_` for `supplyExchangePrice_`
    function getTotalSupply(
        uint256 totalAmounts_,
        uint256 supplyExchangePrice_
    ) internal pure returns (uint256 totalSupply_) {
        // totalSupply_ => supplyInterestFree
        totalSupply_ = (totalAmounts_ >> LiquiditySlotsLink.BITS_TOTAL_AMOUNTS_SUPPLY_INTEREST_FREE) & X64;
        totalSupply_ = (totalSupply_ >> DEFAULT_EXPONENT_SIZE) << (totalSupply_ & DEFAULT_EXPONENT_MASK);
        uint256 totalSupplyRaw_ = totalAmounts_ & X64; // no shifting as supplyRaw is first 64 bits
        totalSupplyRaw_ = (totalSupplyRaw_ >> DEFAULT_EXPONENT_SIZE) << (totalSupplyRaw_ & DEFAULT_EXPONENT_MASK);
        // totalSupply = supplyInterestFree + supplyRawInterest normalized from raw
        totalSupply_ += ((totalSupplyRaw_ * supplyExchangePrice_) / EXCHANGE_PRICES_PRECISION);
    }
    /// @dev reads the total borrow out of Liquidity packed storage `totalAmounts_` for `borrowExchangePrice_`
    function getTotalBorrow(
        uint256 totalAmounts_,
        uint256 borrowExchangePrice_
    ) internal pure returns (uint256 totalBorrow_) {
        // totalBorrow_ => borrowInterestFree
        // no & mask needed for borrow interest free as it occupies the last bits in the storage slot
        totalBorrow_ = (totalAmounts_ >> LiquiditySlotsLink.BITS_TOTAL_AMOUNTS_BORROW_INTEREST_FREE);
        totalBorrow_ = (totalBorrow_ >> DEFAULT_EXPONENT_SIZE) << (totalBorrow_ & DEFAULT_EXPONENT_MASK);
        uint256 totalBorrowRaw_ = (totalAmounts_ >> LiquiditySlotsLink.BITS_TOTAL_AMOUNTS_BORROW_WITH_INTEREST) & X64;
        totalBorrowRaw_ = (totalBorrowRaw_ >> DEFAULT_EXPONENT_SIZE) << (totalBorrowRaw_ & DEFAULT_EXPONENT_MASK);
        // totalBorrow = borrowInterestFree + borrowRawInterest normalized from raw
        totalBorrow_ += ((totalBorrowRaw_ * borrowExchangePrice_) / EXCHANGE_PRICES_PRECISION);
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.21;
/// @notice library that helps in reading / working with storage slot data of Fluid Liquidity.
/// @dev as all data for Fluid Liquidity is internal, any data must be fetched directly through manual
/// slot reading through this library or, if gas usage is less important, through the FluidLiquidityResolver.
library LiquiditySlotsLink {
    /// @dev storage slot for status at Liquidity
    uint256 internal constant LIQUIDITY_STATUS_SLOT = 1;
    /// @dev storage slot for auths mapping at Liquidity
    uint256 internal constant LIQUIDITY_AUTHS_MAPPING_SLOT = 2;
    /// @dev storage slot for guardians mapping at Liquidity
    uint256 internal constant LIQUIDITY_GUARDIANS_MAPPING_SLOT = 3;
    /// @dev storage slot for user class mapping at Liquidity
    uint256 internal constant LIQUIDITY_USER_CLASS_MAPPING_SLOT = 4;
    /// @dev storage slot for exchangePricesAndConfig mapping at Liquidity
    uint256 internal constant LIQUIDITY_EXCHANGE_PRICES_MAPPING_SLOT = 5;
    /// @dev storage slot for rateData mapping at Liquidity
    uint256 internal constant LIQUIDITY_RATE_DATA_MAPPING_SLOT = 6;
    /// @dev storage slot for totalAmounts mapping at Liquidity
    uint256 internal constant LIQUIDITY_TOTAL_AMOUNTS_MAPPING_SLOT = 7;
    /// @dev storage slot for user supply double mapping at Liquidity
    uint256 internal constant LIQUIDITY_USER_SUPPLY_DOUBLE_MAPPING_SLOT = 8;
    /// @dev storage slot for user borrow double mapping at Liquidity
    uint256 internal constant LIQUIDITY_USER_BORROW_DOUBLE_MAPPING_SLOT = 9;
    /// @dev storage slot for listed tokens array at Liquidity
    uint256 internal constant LIQUIDITY_LISTED_TOKENS_ARRAY_SLOT = 10;
    /// @dev storage slot for listed tokens array at Liquidity
    uint256 internal constant LIQUIDITY_CONFIGS2_MAPPING_SLOT = 11;
    // --------------------------------
    // @dev stacked uint256 storage slots bits position data for each:
    // ExchangePricesAndConfig
    uint256 internal constant BITS_EXCHANGE_PRICES_BORROW_RATE = 0;
    uint256 internal constant BITS_EXCHANGE_PRICES_FEE = 16;
    uint256 internal constant BITS_EXCHANGE_PRICES_UTILIZATION = 30;
    uint256 internal constant BITS_EXCHANGE_PRICES_UPDATE_THRESHOLD = 44;
    uint256 internal constant BITS_EXCHANGE_PRICES_LAST_TIMESTAMP = 58;
    uint256 internal constant BITS_EXCHANGE_PRICES_SUPPLY_EXCHANGE_PRICE = 91;
    uint256 internal constant BITS_EXCHANGE_PRICES_BORROW_EXCHANGE_PRICE = 155;
    uint256 internal constant BITS_EXCHANGE_PRICES_SUPPLY_RATIO = 219;
    uint256 internal constant BITS_EXCHANGE_PRICES_BORROW_RATIO = 234;
    uint256 internal constant BITS_EXCHANGE_PRICES_USES_CONFIGS2 = 249;
    // RateData:
    uint256 internal constant BITS_RATE_DATA_VERSION = 0;
    // RateData: V1
    uint256 internal constant BITS_RATE_DATA_V1_RATE_AT_UTILIZATION_ZERO = 4;
    uint256 internal constant BITS_RATE_DATA_V1_UTILIZATION_AT_KINK = 20;
    uint256 internal constant BITS_RATE_DATA_V1_RATE_AT_UTILIZATION_KINK = 36;
    uint256 internal constant BITS_RATE_DATA_V1_RATE_AT_UTILIZATION_MAX = 52;
    // RateData: V2
    uint256 internal constant BITS_RATE_DATA_V2_RATE_AT_UTILIZATION_ZERO = 4;
    uint256 internal constant BITS_RATE_DATA_V2_UTILIZATION_AT_KINK1 = 20;
    uint256 internal constant BITS_RATE_DATA_V2_RATE_AT_UTILIZATION_KINK1 = 36;
    uint256 internal constant BITS_RATE_DATA_V2_UTILIZATION_AT_KINK2 = 52;
    uint256 internal constant BITS_RATE_DATA_V2_RATE_AT_UTILIZATION_KINK2 = 68;
    uint256 internal constant BITS_RATE_DATA_V2_RATE_AT_UTILIZATION_MAX = 84;
    // TotalAmounts
    uint256 internal constant BITS_TOTAL_AMOUNTS_SUPPLY_WITH_INTEREST = 0;
    uint256 internal constant BITS_TOTAL_AMOUNTS_SUPPLY_INTEREST_FREE = 64;
    uint256 internal constant BITS_TOTAL_AMOUNTS_BORROW_WITH_INTEREST = 128;
    uint256 internal constant BITS_TOTAL_AMOUNTS_BORROW_INTEREST_FREE = 192;
    // UserSupplyData
    uint256 internal constant BITS_USER_SUPPLY_MODE = 0;
    uint256 internal constant BITS_USER_SUPPLY_AMOUNT = 1;
    uint256 internal constant BITS_USER_SUPPLY_PREVIOUS_WITHDRAWAL_LIMIT = 65;
    uint256 internal constant BITS_USER_SUPPLY_LAST_UPDATE_TIMESTAMP = 129;
    uint256 internal constant BITS_USER_SUPPLY_EXPAND_PERCENT = 162;
    uint256 internal constant BITS_USER_SUPPLY_EXPAND_DURATION = 176;
    uint256 internal constant BITS_USER_SUPPLY_BASE_WITHDRAWAL_LIMIT = 200;
    uint256 internal constant BITS_USER_SUPPLY_IS_PAUSED = 255;
    // UserBorrowData
    uint256 internal constant BITS_USER_BORROW_MODE = 0;
    uint256 internal constant BITS_USER_BORROW_AMOUNT = 1;
    uint256 internal constant BITS_USER_BORROW_PREVIOUS_BORROW_LIMIT = 65;
    uint256 internal constant BITS_USER_BORROW_LAST_UPDATE_TIMESTAMP = 129;
    uint256 internal constant BITS_USER_BORROW_EXPAND_PERCENT = 162;
    uint256 internal constant BITS_USER_BORROW_EXPAND_DURATION = 176;
    uint256 internal constant BITS_USER_BORROW_BASE_BORROW_LIMIT = 200;
    uint256 internal constant BITS_USER_BORROW_MAX_BORROW_LIMIT = 218;
    uint256 internal constant BITS_USER_BORROW_IS_PAUSED = 255;
    // Configs2
    uint256 internal constant BITS_CONFIGS2_MAX_UTILIZATION = 0;
    // --------------------------------
    /// @notice Calculating the slot ID for Liquidity contract for single mapping at `slot_` for `key_`
    function calculateMappingStorageSlot(uint256 slot_, address key_) internal pure returns (bytes32) {
        return keccak256(abi.encode(key_, slot_));
    }
    /// @notice Calculating the slot ID for Liquidity contract for double mapping at `slot_` for `key1_` and `key2_`
    function calculateDoubleMappingStorageSlot(
        uint256 slot_,
        address key1_,
        address key2_
    ) internal pure returns (bytes32) {
        bytes32 intermediateSlot_ = keccak256(abi.encode(key1_, slot_));
        return keccak256(abi.encode(key2_, intermediateSlot_));
    }
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity 0.8.21;
import { LibsErrorTypes as ErrorTypes } from "./errorTypes.sol";
/// @notice provides minimalistic methods for safe transfers, e.g. ERC20 safeTransferFrom
library SafeTransfer {
    uint256 internal constant MAX_NATIVE_TRANSFER_GAS = 20000; // pass max. 20k gas for native transfers
    error FluidSafeTransferError(uint256 errorId_);
    /// @dev Transfer `amount_` of `token_` from `from_` to `to_`, spending the approval given by `from_` to the
    /// calling contract. If `token_` returns no value, non-reverting calls are assumed to be successful.
    /// Minimally modified from Solmate SafeTransferLib (address as input param for token, Custom Error):
    /// https://github.com/transmissions11/solmate/blob/50e15bb566f98b7174da9b0066126a4c3e75e0fd/src/utils/SafeTransferLib.sol#L31-L63
    function safeTransferFrom(address token_, address from_, address to_, uint256 amount_) internal {
        bool success_;
        /// @solidity memory-safe-assembly
        assembly {
            // Get a pointer to some free memory.
            let freeMemoryPointer := mload(0x40)
            // Write the abi-encoded calldata into memory, beginning with the function selector.
            mstore(freeMemoryPointer, 0x23b872dd00000000000000000000000000000000000000000000000000000000)
            mstore(add(freeMemoryPointer, 4), and(from_, 0xffffffffffffffffffffffffffffffffffffffff)) // Append and mask the "from_" argument.
            mstore(add(freeMemoryPointer, 36), and(to_, 0xffffffffffffffffffffffffffffffffffffffff)) // Append and mask the "to_" argument.
            mstore(add(freeMemoryPointer, 68), amount_) // Append the "amount_" argument. Masking not required as it's a full 32 byte type.
            success_ := and(
                // Set success to whether the call reverted, if not we check it either
                // returned exactly 1 (can't just be non-zero data), or had no return data.
                or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
                // We use 100 because the length of our calldata totals up like so: 4 + 32 * 3.
                // We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
                // Counterintuitively, this call must be positioned second to the or() call in the
                // surrounding and() call or else returndatasize() will be zero during the computation.
                call(gas(), token_, 0, freeMemoryPointer, 100, 0, 32)
            )
        }
        if (!success_) {
            revert FluidSafeTransferError(ErrorTypes.SafeTransfer__TransferFromFailed);
        }
    }
    /// @dev Transfer `amount_` of `token_` to `to_`.
    /// If `token_` returns no value, non-reverting calls are assumed to be successful.
    /// Minimally modified from Solmate SafeTransferLib (address as input param for token, Custom Error):
    /// https://github.com/transmissions11/solmate/blob/50e15bb566f98b7174da9b0066126a4c3e75e0fd/src/utils/SafeTransferLib.sol#L65-L95
    function safeTransfer(address token_, address to_, uint256 amount_) internal {
        bool success_;
        /// @solidity memory-safe-assembly
        assembly {
            // Get a pointer to some free memory.
            let freeMemoryPointer := mload(0x40)
            // Write the abi-encoded calldata into memory, beginning with the function selector.
            mstore(freeMemoryPointer, 0xa9059cbb00000000000000000000000000000000000000000000000000000000)
            mstore(add(freeMemoryPointer, 4), and(to_, 0xffffffffffffffffffffffffffffffffffffffff)) // Append and mask the "to_" argument.
            mstore(add(freeMemoryPointer, 36), amount_) // Append the "amount_" argument. Masking not required as it's a full 32 byte type.
            success_ := and(
                // Set success to whether the call reverted, if not we check it either
                // returned exactly 1 (can't just be non-zero data), or had no return data.
                or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
                // We use 68 because the length of our calldata totals up like so: 4 + 32 * 2.
                // We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
                // Counterintuitively, this call must be positioned second to the or() call in the
                // surrounding and() call or else returndatasize() will be zero during the computation.
                call(gas(), token_, 0, freeMemoryPointer, 68, 0, 32)
            )
        }
        if (!success_) {
            revert FluidSafeTransferError(ErrorTypes.SafeTransfer__TransferFailed);
        }
    }
    /// @dev Transfer `amount_` of ` native token to `to_`.
    /// Minimally modified from Solmate SafeTransferLib (Custom Error):
    /// https://github.com/transmissions11/solmate/blob/50e15bb566f98b7174da9b0066126a4c3e75e0fd/src/utils/SafeTransferLib.sol#L15-L25
    function safeTransferNative(address to_, uint256 amount_) internal {
        bool success_;
        /// @solidity memory-safe-assembly
        assembly {
            // Transfer the ETH and store if it succeeded or not. Pass limited gas
            success_ := call(MAX_NATIVE_TRANSFER_GAS, to_, amount_, 0, 0, 0, 0)
        }
        if (!success_) {
            revert FluidSafeTransferError(ErrorTypes.SafeTransfer__TransferFailed);
        }
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.21;
/// @notice implements a method to read uint256 data from storage at a bytes32 storage slot key.
contract StorageRead {
    function readFromStorage(bytes32 slot_) public view returns (uint256 result_) {
        assembly {
            result_ := sload(slot_) // read value from the storage slot
        }
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.21;
abstract contract Structs {
    struct AddressBool {
        address addr;
        bool value;
    }
    struct AddressUint256 {
        address addr;
        uint256 value;
    }
    /// @notice struct to set borrow rate data for version 1
    struct RateDataV1Params {
        ///
        /// @param token for rate data
        address token;
        ///
        /// @param kink in borrow rate. in 1e2: 100% = 10_000; 1% = 100
        /// utilization below kink usually means slow increase in rate, once utilization is above kink borrow rate increases fast
        uint256 kink;
        ///
        /// @param rateAtUtilizationZero desired borrow rate when utilization is zero. in 1e2: 100% = 10_000; 1% = 100
        /// i.e. constant minimum borrow rate
        /// e.g. at utilization = 0.01% rate could still be at least 4% (rateAtUtilizationZero would be 400 then)
        uint256 rateAtUtilizationZero;
        ///
        /// @param rateAtUtilizationKink borrow rate when utilization is at kink. in 1e2: 100% = 10_000; 1% = 100
        /// e.g. when rate should be 7% at kink then rateAtUtilizationKink would be 700
        uint256 rateAtUtilizationKink;
        ///
        /// @param rateAtUtilizationMax borrow rate when utilization is maximum at 100%. in 1e2: 100% = 10_000; 1% = 100
        /// e.g. when rate should be 125% at 100% then rateAtUtilizationMax would be 12_500
        uint256 rateAtUtilizationMax;
    }
    /// @notice struct to set borrow rate data for version 2
    struct RateDataV2Params {
        ///
        /// @param token for rate data
        address token;
        ///
        /// @param kink1 first kink in borrow rate. in 1e2: 100% = 10_000; 1% = 100
        /// utilization below kink 1 usually means slow increase in rate, once utilization is above kink 1 borrow rate increases faster
        uint256 kink1;
        ///
        /// @param kink2 second kink in borrow rate. in 1e2: 100% = 10_000; 1% = 100
        /// utilization below kink 2 usually means slow / medium increase in rate, once utilization is above kink 2 borrow rate increases fast
        uint256 kink2;
        ///
        /// @param rateAtUtilizationZero desired borrow rate when utilization is zero. in 1e2: 100% = 10_000; 1% = 100
        /// i.e. constant minimum borrow rate
        /// e.g. at utilization = 0.01% rate could still be at least 4% (rateAtUtilizationZero would be 400 then)
        uint256 rateAtUtilizationZero;
        ///
        /// @param rateAtUtilizationKink1 desired borrow rate when utilization is at first kink. in 1e2: 100% = 10_000; 1% = 100
        /// e.g. when rate should be 7% at first kink then rateAtUtilizationKink would be 700
        uint256 rateAtUtilizationKink1;
        ///
        /// @param rateAtUtilizationKink2 desired borrow rate when utilization is at second kink. in 1e2: 100% = 10_000; 1% = 100
        /// e.g. when rate should be 7% at second kink then rateAtUtilizationKink would be 1_200
        uint256 rateAtUtilizationKink2;
        ///
        /// @param rateAtUtilizationMax desired borrow rate when utilization is maximum at 100%. in 1e2: 100% = 10_000; 1% = 100
        /// e.g. when rate should be 125% at 100% then rateAtUtilizationMax would be 12_500
        uint256 rateAtUtilizationMax;
    }
    /// @notice struct to set token config
    struct TokenConfig {
        ///
        /// @param token address
        address token;
        ///
        /// @param fee charges on borrower's interest. in 1e2: 100% = 10_000; 1% = 100
        uint256 fee;
        ///
        /// @param threshold on when to update the storage slot. in 1e2: 100% = 10_000; 1% = 100
        uint256 threshold;
        ///
        /// @param maxUtilization maximum allowed utilization. in 1e2: 100% = 10_000; 1% = 100
        ///                       set to 100% to disable and have default limit of 100% (avoiding SLOAD).
        uint256 maxUtilization;
    }
    /// @notice struct to set user supply & withdrawal config
    struct UserSupplyConfig {
        ///
        /// @param user address
        address user;
        ///
        /// @param token address
        address token;
        ///
        /// @param mode: 0 = without interest. 1 = with interest
        uint8 mode;
        ///
        /// @param expandPercent withdrawal limit expand percent. in 1e2: 100% = 10_000; 1% = 100
        /// Also used to calculate rate at which withdrawal limit should decrease (instant).
        uint256 expandPercent;
        ///
        /// @param expandDuration withdrawal limit expand duration in seconds.
        /// used to calculate rate together with expandPercent
        uint256 expandDuration;
        ///
        /// @param baseWithdrawalLimit base limit, below this, user can withdraw the entire amount.
        /// amount in raw (to be multiplied with exchange price) or normal depends on configured mode in user config for the token:
        /// with interest -> raw, without interest -> normal
        uint256 baseWithdrawalLimit;
    }
    /// @notice struct to set user borrow & payback config
    struct UserBorrowConfig {
        ///
        /// @param user address
        address user;
        ///
        /// @param token address
        address token;
        ///
        /// @param mode: 0 = without interest. 1 = with interest
        uint8 mode;
        ///
        /// @param expandPercent debt limit expand percent. in 1e2: 100% = 10_000; 1% = 100
        /// Also used to calculate rate at which debt limit should decrease (instant).
        uint256 expandPercent;
        ///
        /// @param expandDuration debt limit expand duration in seconds.
        /// used to calculate rate together with expandPercent
        uint256 expandDuration;
        ///
        /// @param baseDebtCeiling base borrow limit. until here, borrow limit remains as baseDebtCeiling
        /// (user can borrow until this point at once without stepped expansion). Above this, automated limit comes in place.
        /// amount in raw (to be multiplied with exchange price) or normal depends on configured mode in user config for the token:
        /// with interest -> raw, without interest -> normal
        uint256 baseDebtCeiling;
        ///
        /// @param maxDebtCeiling max borrow ceiling, maximum amount the user can borrow.
        /// amount in raw (to be multiplied with exchange price) or normal depends on configured mode in user config for the token:
        /// with interest -> raw, without interest -> normal
        uint256 maxDebtCeiling;
    }
}
//SPDX-License-Identifier: MIT
pragma solidity 0.8.21;
import { IProxy } from "../../infiniteProxy/interfaces/iProxy.sol";
import { Structs as AdminModuleStructs } from "../adminModule/structs.sol";
interface IFluidLiquidityAdmin {
    /// @notice adds/removes auths. Auths generally could be contracts which can have restricted actions defined on contract.
    ///         auths can be helpful in reducing governance overhead where it's not needed.
    /// @param authsStatus_ array of structs setting allowed status for an address.
    ///                     status true => add auth, false => remove auth
    function updateAuths(AdminModuleStructs.AddressBool[] calldata authsStatus_) external;
    /// @notice adds/removes guardians. Only callable by Governance.
    /// @param guardiansStatus_ array of structs setting allowed status for an address.
    ///                         status true => add guardian, false => remove guardian
    function updateGuardians(AdminModuleStructs.AddressBool[] calldata guardiansStatus_) external;
    /// @notice changes the revenue collector address (contract that is sent revenue). Only callable by Governance.
    /// @param revenueCollector_  new revenue collector address
    function updateRevenueCollector(address revenueCollector_) external;
    /// @notice changes current status, e.g. for pausing or unpausing all user operations. Only callable by Auths.
    /// @param newStatus_ new status
    ///        status = 2 -> pause, status = 1 -> resume.
    function changeStatus(uint256 newStatus_) external;
    /// @notice                  update tokens rate data version 1. Only callable by Auths.
    /// @param tokensRateData_   array of RateDataV1Params with rate data to set for each token
    function updateRateDataV1s(AdminModuleStructs.RateDataV1Params[] calldata tokensRateData_) external;
    /// @notice                  update tokens rate data version 2. Only callable by Auths.
    /// @param tokensRateData_   array of RateDataV2Params with rate data to set for each token
    function updateRateDataV2s(AdminModuleStructs.RateDataV2Params[] calldata tokensRateData_) external;
    /// @notice updates token configs: fee charge on borrowers interest & storage update utilization threshold.
    ///         Only callable by Auths.
    /// @param tokenConfigs_ contains token address, fee & utilization threshold
    function updateTokenConfigs(AdminModuleStructs.TokenConfig[] calldata tokenConfigs_) external;
    /// @notice updates user classes: 0 is for new protocols, 1 is for established protocols.
    ///         Only callable by Auths.
    /// @param userClasses_ struct array of uint256 value to assign for each user address
    function updateUserClasses(AdminModuleStructs.AddressUint256[] calldata userClasses_) external;
    /// @notice sets user supply configs per token basis. Eg: with interest or interest-free and automated limits.
    ///         Only callable by Auths.
    /// @param userSupplyConfigs_ struct array containing user supply config, see `UserSupplyConfig` struct for more info
    function updateUserSupplyConfigs(AdminModuleStructs.UserSupplyConfig[] memory userSupplyConfigs_) external;
    /// @notice sets a new withdrawal limit as the current limit for a certain user
    /// @param user_ user address for which to update the withdrawal limit
    /// @param token_ token address for which to update the withdrawal limit
    /// @param newLimit_ new limit until which user supply can decrease to.
    ///                  Important: input in raw. Must account for exchange price in input param calculation.
    ///                  Note any limit that is < max expansion or > current user supply will set max expansion limit or
    ///                  current user supply as limit respectively.
    ///                  - set 0 to make maximum possible withdrawable: instant full expansion, and if that goes
    ///                  below base limit then fully down to 0.
    ///                  - set type(uint256).max to make current withdrawable 0 (sets current user supply as limit).
    function updateUserWithdrawalLimit(address user_, address token_, uint256 newLimit_) external;
    /// @notice setting user borrow configs per token basis. Eg: with interest or interest-free and automated limits.
    ///         Only callable by Auths.
    /// @param userBorrowConfigs_ struct array containing user borrow config, see `UserBorrowConfig` struct for more info
    function updateUserBorrowConfigs(AdminModuleStructs.UserBorrowConfig[] memory userBorrowConfigs_) external;
    /// @notice pause operations for a particular user in class 0 (class 1 users can't be paused by guardians).
    /// Only callable by Guardians.
    /// @param user_          address of user to pause operations for
    /// @param supplyTokens_  token addresses to pause withdrawals for
    /// @param borrowTokens_  token addresses to pause borrowings for
    function pauseUser(address user_, address[] calldata supplyTokens_, address[] calldata borrowTokens_) external;
    /// @notice unpause operations for a particular user in class 0 (class 1 users can't be paused by guardians).
    /// Only callable by Guardians.
    /// @param user_          address of user to unpause operations for
    /// @param supplyTokens_  token addresses to unpause withdrawals for
    /// @param borrowTokens_  token addresses to unpause borrowings for
    function unpauseUser(address user_, address[] calldata supplyTokens_, address[] calldata borrowTokens_) external;
    /// @notice         collects revenue for tokens to configured revenueCollector address.
    /// @param tokens_  array of tokens to collect revenue for
    /// @dev            Note that this can revert if token balance is < revenueAmount (utilization > 100%)
    function collectRevenue(address[] calldata tokens_) external;
    /// @notice gets the current updated exchange prices for n tokens and updates all prices, rates related data in storage.
    /// @param tokens_ tokens to update exchange prices for
    /// @return supplyExchangePrices_ new supply rates of overall system for each token
    /// @return borrowExchangePrices_ new borrow rates of overall system for each token
    function updateExchangePrices(
        address[] calldata tokens_
    ) external returns (uint256[] memory supplyExchangePrices_, uint256[] memory borrowExchangePrices_);
}
interface IFluidLiquidityLogic is IFluidLiquidityAdmin {
    /// @notice Single function which handles supply, withdraw, borrow & payback
    /// @param token_ address of token (0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE for native)
    /// @param supplyAmount_ if +ve then supply, if -ve then withdraw, if 0 then nothing
    /// @param borrowAmount_ if +ve then borrow, if -ve then payback, if 0 then nothing
    /// @param withdrawTo_ if withdrawal then to which address
    /// @param borrowTo_ if borrow then to which address
    /// @param callbackData_ callback data passed to `liquidityCallback` method of protocol
    /// @return memVar3_ updated supplyExchangePrice
    /// @return memVar4_ updated borrowExchangePrice
    /// @dev to trigger skipping in / out transfers (gas optimization):
    /// -  ` callbackData_` MUST be encoded so that "from" address is the last 20 bytes in the last 32 bytes slot,
    ///     also for native token operations where liquidityCallback is not triggered!
    ///     from address must come at last position if there is more data. I.e. encode like:
    ///     abi.encode(otherVar1, otherVar2, FROM_ADDRESS). Note dynamic types used with abi.encode come at the end
    ///     so if dynamic types are needed, you must use abi.encodePacked to ensure the from address is at the end.
    /// -   this "from" address must match withdrawTo_ or borrowTo_ and must be == `msg.sender`
    /// -   `callbackData_` must in addition to the from address as described above include bytes32 SKIP_TRANSFERS
    ///     in the slot before (bytes 32 to 63)
    /// -   `msg.value` must be 0.
    /// -   Amounts must be either:
    ///     -  supply(+) == borrow(+), withdraw(-) == payback(-).
    ///     -  Liquidity must be on the winning side (deposit < borrow OR payback < withdraw).
    function operate(
        address token_,
        int256 supplyAmount_,
        int256 borrowAmount_,
        address withdrawTo_,
        address borrowTo_,
        bytes calldata callbackData_
    ) external payable returns (uint256 memVar3_, uint256 memVar4_);
}
interface IFluidLiquidity is IProxy, IFluidLiquidityLogic {}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.21;
import { Structs } from "./poolT1/coreModule/structs.sol";
abstract contract Error {
    error FluidDexError(uint256 errorId_);
    error FluidDexFactoryError(uint256 errorId);
    /// @notice used to simulate swap to find the output amount
    error FluidDexSwapResult(uint256 amountOut);
    error FluidDexPerfectLiquidityOutput(uint256 token0Amt, uint token1Amt);
    error FluidDexSingleTokenOutput(uint256 tokenAmt);
    error FluidDexLiquidityOutput(uint256 shares_);
    error FluidDexPricesAndExchangeRates(Structs.PricesAndExchangePrice pex_);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.21;
library ErrorTypes {
    /***********************************|
    |             DexT1                 | 
    |__________________________________*/
    /// @notice thrown at reentrancy
    uint256 internal constant DexT1__AlreadyEntered = 51001;
    uint256 internal constant DexT1__NotAnAuth = 51002;
    uint256 internal constant DexT1__SmartColNotEnabled = 51003;
    uint256 internal constant DexT1__SmartDebtNotEnabled = 51004;
    uint256 internal constant DexT1__PoolNotInitialized = 51005;
    uint256 internal constant DexT1__TokenReservesTooLow = 51006;
    uint256 internal constant DexT1__EthAndAmountInMisMatch = 51007;
    uint256 internal constant DexT1__EthSentForNonNativeSwap = 51008;
    uint256 internal constant DexT1__NoSwapRoute = 51009;
    uint256 internal constant DexT1__NotEnoughAmountOut = 51010;
    uint256 internal constant DexT1__LiquidityLayerTokenUtilizationCapReached = 51011;
    uint256 internal constant DexT1__HookReturnedFalse = 51012;
    // Either user's config are not set or user is paused
    uint256 internal constant DexT1__UserSupplyInNotOn = 51013;
    // Either user's config are not set or user is paused
    uint256 internal constant DexT1__UserDebtInNotOn = 51014;
    // Thrown when contract asks for more token0 or token1 than what user's wants to give on deposit
    uint256 internal constant DexT1__AboveDepositMax = 51015;
    uint256 internal constant DexT1__MsgValueLowOnDepositOrPayback = 51016;
    uint256 internal constant DexT1__WithdrawLimitReached = 51017;
    // Thrown when contract gives less token0 or token1 than what user's wants on withdraw
    uint256 internal constant DexT1__BelowWithdrawMin = 51018;
    uint256 internal constant DexT1__DebtLimitReached = 51019;
    // Thrown when contract gives less token0 or token1 than what user's wants on borrow
    uint256 internal constant DexT1__BelowBorrowMin = 51020;
    // Thrown when contract asks for more token0 or token1 than what user's wants on payback
    uint256 internal constant DexT1__AbovePaybackMax = 51021;
    uint256 internal constant DexT1__InvalidDepositAmts = 51022;
    uint256 internal constant DexT1__DepositAmtsZero = 51023;
    uint256 internal constant DexT1__SharesMintedLess = 51024;
    uint256 internal constant DexT1__WithdrawalNotEnough = 51025;
    uint256 internal constant DexT1__InvalidWithdrawAmts = 51026;
    uint256 internal constant DexT1__WithdrawAmtsZero = 51027;
    uint256 internal constant DexT1__WithdrawExcessSharesBurn = 51028;
    uint256 internal constant DexT1__InvalidBorrowAmts = 51029;
    uint256 internal constant DexT1__BorrowAmtsZero = 51030;
    uint256 internal constant DexT1__BorrowExcessSharesMinted = 51031;
    uint256 internal constant DexT1__PaybackAmtTooHigh = 51032;
    uint256 internal constant DexT1__InvalidPaybackAmts = 51033;
    uint256 internal constant DexT1__PaybackAmtsZero = 51034;
    uint256 internal constant DexT1__PaybackSharedBurnedLess = 51035;
    uint256 internal constant DexT1__NothingToArbitrage = 51036;
    uint256 internal constant DexT1__MsgSenderNotLiquidity = 51037;
    // On liquidity callback reentrancy bit should be on
    uint256 internal constant DexT1__ReentrancyBitShouldBeOn = 51038;
    // Thrown is reentrancy is already on and someone tries to fetch oracle price. Should not be possible to this
    uint256 internal constant DexT1__OraclePriceFetchAlreadyEntered = 51039;
    // Thrown when swap changes the current price by more than 5%
    uint256 internal constant DexT1__OracleUpdateHugeSwapDiff = 51040;
    uint256 internal constant DexT1__Token0ShouldBeSmallerThanToken1 = 51041;
    uint256 internal constant DexT1__OracleMappingOverflow = 51042;
    /// @notice thrown if governance has paused the swapping & arbitrage so only perfect functions are usable
    uint256 internal constant DexT1__SwapAndArbitragePaused = 51043;
    uint256 internal constant DexT1__ExceedsAmountInMax = 51044;
    /// @notice thrown if amount in is too high or too low
    uint256 internal constant DexT1__SwapInLimitingAmounts = 51045;
    /// @notice thrown if amount out is too high or too low
    uint256 internal constant DexT1__SwapOutLimitingAmounts = 51046;
    uint256 internal constant DexT1__MintAmtOverflow = 51047;
    uint256 internal constant DexT1__BurnAmtOverflow = 51048;
    uint256 internal constant DexT1__LimitingAmountsSwapAndNonPerfectActions = 51049;
    uint256 internal constant DexT1__InsufficientOracleData = 51050;
    uint256 internal constant DexT1__SharesAmountInsufficient = 51051;
    uint256 internal constant DexT1__CenterPriceOutOfRange = 51052;
    uint256 internal constant DexT1__DebtReservesTooLow = 51053;
    uint256 internal constant DexT1__SwapAndDepositTooLowOrTooHigh = 51054;
    uint256 internal constant DexT1__WithdrawAndSwapTooLowOrTooHigh = 51055;
    uint256 internal constant DexT1__BorrowAndSwapTooLowOrTooHigh = 51056;
    uint256 internal constant DexT1__SwapAndPaybackTooLowOrTooHigh = 51057;
    uint256 internal constant DexT1__InvalidImplementation = 51058;
    uint256 internal constant DexT1__OnlyDelegateCallAllowed = 51059;
    uint256 internal constant DexT1__IncorrectDataLength = 51060;
    uint256 internal constant DexT1__AmountToSendLessThanAmount = 51061;
    uint256 internal constant DexT1__InvalidCollateralReserves = 51062;
    uint256 internal constant DexT1__InvalidDebtReserves = 51063;
    uint256 internal constant DexT1__SupplySharesOverflow = 51064;
    uint256 internal constant DexT1__BorrowSharesOverflow = 51065;
    uint256 internal constant DexT1__OracleNotActive = 51066;
    /***********************************|
    |            DEX Admin              | 
    |__________________________________*/
    /// @notice thrown when pool is not initialized
    uint256 internal constant DexT1Admin__PoolNotInitialized = 52001;
    uint256 internal constant DexT1Admin__SmartColIsAlreadyOn = 52002;
    uint256 internal constant DexT1Admin__SmartDebtIsAlreadyOn = 52003;
    /// @notice thrown when any of the configs value overflow the maximum limit
    uint256 internal constant DexT1Admin__ConfigOverflow = 52004;
    uint256 internal constant DexT1Admin__AddressNotAContract = 52005;
    uint256 internal constant DexT1Admin__InvalidParams = 52006;
    uint256 internal constant DexT1Admin__UserNotDefined = 52007;
    uint256 internal constant DexT1Admin__OnlyDelegateCallAllowed = 52008;
    uint256 internal constant DexT1Admin__UnexpectedPoolState = 52009;
    /// @notice thrown when trying to pause or unpause but user is already in the target pause state
    uint256 internal constant DexT1Admin__InvalidPauseToggle = 52009;
    /***********************************|
    |            DEX Factory            | 
    |__________________________________*/
    uint256 internal constant DexFactory__InvalidOperation = 53001;
    uint256 internal constant DexFactory__Unauthorized = 53002;
    uint256 internal constant DexFactory__SameTokenNotAllowed = 53003;
    uint256 internal constant DexFactory__TokenConfigNotProper = 53004;
    uint256 internal constant DexFactory__InvalidParams = 53005;
    uint256 internal constant DexFactory__OnlyDelegateCallAllowed = 53006;
    uint256 internal constant DexFactory__InvalidDexAddress = 53007;
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;
interface IFluidDexFactory {
    /// @notice Global auth is auth for all dexes
    function isGlobalAuth(address auth_) external view returns (bool);
    /// @notice Dex auth is auth for a specific dex
    function isDexAuth(address vault_, address auth_) external view returns (bool);
    /// @notice Total dexes deployed.
    function totalDexes() external view returns (uint256);
    /// @notice Compute dexAddress
    function getDexAddress(uint256 dexId_) external view returns (address);
    /// @notice read uint256 `result_` for a storage `slot_` key
    function readFromStorage(bytes32 slot_) external view returns (uint256 result_);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;
interface IFluidDexT1 {
    error FluidDexError(uint256 errorId);
    /// @notice used to simulate swap to find the output amount
    error FluidDexSwapResult(uint256 amountOut);
    error FluidDexPerfectLiquidityOutput(uint256 token0Amt, uint token1Amt);
    error FluidDexSingleTokenOutput(uint256 tokenAmt);
    error FluidDexLiquidityOutput(uint256 shares);
    error FluidDexPricesAndExchangeRates(PricesAndExchangePrice pex_);
    /// @notice returns the dex id
    function DEX_ID() external view returns (uint256);
    /// @notice reads uint256 data `result_` from storage at a bytes32 storage `slot_` key.
    function readFromStorage(bytes32 slot_) external view returns (uint256 result_);
    struct Implementations {
        address shift;
        address admin;
        address colOperations;
        address debtOperations;
        address perfectOperationsAndOracle;
    }
    struct ConstantViews {
        uint256 dexId;
        address liquidity;
        address factory;
        Implementations implementations;
        address deployerContract;
        address token0;
        address token1;
        bytes32 supplyToken0Slot;
        bytes32 borrowToken0Slot;
        bytes32 supplyToken1Slot;
        bytes32 borrowToken1Slot;
        bytes32 exchangePriceToken0Slot;
        bytes32 exchangePriceToken1Slot;
        uint256 oracleMapping;
    }
    struct ConstantViews2 {
        uint token0NumeratorPrecision;
        uint token0DenominatorPrecision;
        uint token1NumeratorPrecision;
        uint token1DenominatorPrecision;
    }
    struct PricesAndExchangePrice {
        uint lastStoredPrice; // last stored price in 1e27 decimals
        uint centerPrice; // last stored price in 1e27 decimals
        uint upperRange; // price at upper range in 1e27 decimals
        uint lowerRange; // price at lower range in 1e27 decimals
        uint geometricMean; // geometric mean of upper range & lower range in 1e27 decimals
        uint supplyToken0ExchangePrice;
        uint borrowToken0ExchangePrice;
        uint supplyToken1ExchangePrice;
        uint borrowToken1ExchangePrice;
    }
    struct CollateralReserves {
        uint token0RealReserves;
        uint token1RealReserves;
        uint token0ImaginaryReserves;
        uint token1ImaginaryReserves;
    }
    struct DebtReserves {
        uint token0Debt;
        uint token1Debt;
        uint token0RealReserves;
        uint token1RealReserves;
        uint token0ImaginaryReserves;
        uint token1ImaginaryReserves;
    }
    function getCollateralReserves(
        uint geometricMean_,
        uint upperRange_,
        uint lowerRange_,
        uint token0SupplyExchangePrice_,
        uint token1SupplyExchangePrice_
    ) external view returns (CollateralReserves memory c_);
    function getDebtReserves(
        uint geometricMean_,
        uint upperRange_,
        uint lowerRange_,
        uint token0BorrowExchangePrice_,
        uint token1BorrowExchangePrice_
    ) external view returns (DebtReserves memory d_);
    // reverts with FluidDexPricesAndExchangeRates(pex_);
    function getPricesAndExchangePrices() external;
    function constantsView() external view returns (ConstantViews memory constantsView_);
    function constantsView2() external view returns (ConstantViews2 memory constantsView2_);
    struct Oracle {
        uint twap1by0; // TWAP price
        uint lowestPrice1by0; // lowest price point
        uint highestPrice1by0; // highest price point
        uint twap0by1; // TWAP price
        uint lowestPrice0by1; // lowest price point
        uint highestPrice0by1; // highest price point
    }
    /// @dev This function allows users to swap a specific amount of input tokens for output tokens
    /// @param swap0to1_ Direction of swap. If true, swaps token0 for token1; if false, swaps token1 for token0
    /// @param amountIn_ The exact amount of input tokens to swap
    /// @param amountOutMin_ The minimum amount of output tokens the user is willing to accept
    /// @param to_ Recipient of swapped tokens. If to_ == address(0) then out tokens will be sent to msg.sender. If to_ == ADDRESS_DEAD then function will revert with amountOut_
    /// @return amountOut_ The amount of output tokens received from the swap
    function swapIn(
        bool swap0to1_,
        uint256 amountIn_,
        uint256 amountOutMin_,
        address to_
    ) external payable returns (uint256 amountOut_);
    /// @dev Swap tokens with perfect amount out
    /// @param swap0to1_ Direction of swap. If true, swaps token0 for token1; if false, swaps token1 for token0
    /// @param amountOut_ The exact amount of tokens to receive after swap
    /// @param amountInMax_ Maximum amount of tokens to swap in
    /// @param to_ Recipient of swapped tokens. If to_ == address(0) then out tokens will be sent to msg.sender. If to_ == ADDRESS_DEAD then function will revert with amountIn_
    /// @return amountIn_ The amount of input tokens used for the swap
    function swapOut(
        bool swap0to1_,
        uint256 amountOut_,
        uint256 amountInMax_,
        address to_
    ) external payable returns (uint256 amountIn_);
    /// @dev Deposit tokens in equal proportion to the current pool ratio
    /// @param shares_ The number of shares to mint
    /// @param maxToken0Deposit_ Maximum amount of token0 to deposit
    /// @param maxToken1Deposit_ Maximum amount of token1 to deposit
    /// @param estimate_ If true, function will revert with estimated deposit amounts without executing the deposit
    /// @return token0Amt_ Amount of token0 deposited
    /// @return token1Amt_ Amount of token1 deposited
    function depositPerfect(
        uint shares_,
        uint maxToken0Deposit_,
        uint maxToken1Deposit_,
        bool estimate_
    ) external payable returns (uint token0Amt_, uint token1Amt_);
    /// @dev This function allows users to withdraw a perfect amount of collateral liquidity
    /// @param shares_ The number of shares to withdraw
    /// @param minToken0Withdraw_ The minimum amount of token0 the user is willing to accept
    /// @param minToken1Withdraw_ The minimum amount of token1 the user is willing to accept
    /// @param to_ Recipient of swapped tokens. If to_ == address(0) then out tokens will be sent to msg.sender. If to_ == ADDRESS_DEAD then function will revert with token0Amt_ & token1Amt_
    /// @return token0Amt_ The amount of token0 withdrawn
    /// @return token1Amt_ The amount of token1 withdrawn
    function withdrawPerfect(
        uint shares_,
        uint minToken0Withdraw_,
        uint minToken1Withdraw_,
        address to_
    ) external returns (uint token0Amt_, uint token1Amt_);
    /// @dev This function allows users to borrow tokens in equal proportion to the current debt pool ratio
    /// @param shares_ The number of shares to borrow
    /// @param minToken0Borrow_ Minimum amount of token0 to borrow
    /// @param minToken1Borrow_ Minimum amount of token1 to borrow
    /// @param to_ Recipient of swapped tokens. If to_ == address(0) then out tokens will be sent to msg.sender. If to_ == ADDRESS_DEAD then function will revert with token0Amt_ & token1Amt_
    /// @return token0Amt_ Amount of token0 borrowed
    /// @return token1Amt_ Amount of token1 borrowed
    function borrowPerfect(
        uint shares_,
        uint minToken0Borrow_,
        uint minToken1Borrow_,
        address to_
    ) external returns (uint token0Amt_, uint token1Amt_);
    /// @dev This function allows users to pay back borrowed tokens in equal proportion to the current debt pool ratio
    /// @param shares_ The number of shares to pay back
    /// @param maxToken0Payback_ Maximum amount of token0 to pay back
    /// @param maxToken1Payback_ Maximum amount of token1 to pay back
    /// @param estimate_ If true, function will revert with estimated payback amounts without executing the payback
    /// @return token0Amt_ Amount of token0 paid back
    /// @return token1Amt_ Amount of token1 paid back
    function paybackPerfect(
        uint shares_,
        uint maxToken0Payback_,
        uint maxToken1Payback_,
        bool estimate_
    ) external payable returns (uint token0Amt_, uint token1Amt_);
    /// @dev This function allows users to deposit tokens in any proportion into the col pool
    /// @param token0Amt_ The amount of token0 to deposit
    /// @param token1Amt_ The amount of token1 to deposit
    /// @param minSharesAmt_ The minimum amount of shares the user expects to receive
    /// @param estimate_ If true, function will revert with estimated shares without executing the deposit
    /// @return shares_ The amount of shares minted for the deposit
    function deposit(
        uint token0Amt_,
        uint token1Amt_,
        uint minSharesAmt_,
        bool estimate_
    ) external payable returns (uint shares_);
    /// @dev This function allows users to withdraw tokens in any proportion from the col pool
    /// @param token0Amt_ The amount of token0 to withdraw
    /// @param token1Amt_ The amount of token1 to withdraw
    /// @param maxSharesAmt_ The maximum number of shares the user is willing to burn
    /// @param to_ Recipient of swapped tokens. If to_ == address(0) then out tokens will be sent to msg.sender. If to_ == ADDRESS_DEAD then function will revert with shares_
    /// @return shares_ The number of shares burned for the withdrawal
    function withdraw(
        uint token0Amt_,
        uint token1Amt_,
        uint maxSharesAmt_,
        address to_
    ) external returns (uint shares_);
    /// @dev This function allows users to borrow tokens in any proportion from the debt pool
    /// @param token0Amt_ The amount of token0 to borrow
    /// @param token1Amt_ The amount of token1 to borrow
    /// @param maxSharesAmt_ The maximum amount of shares the user is willing to receive
    /// @param to_ Recipient of swapped tokens. If to_ == address(0) then out tokens will be sent to msg.sender. If to_ == ADDRESS_DEAD then function will revert with shares_
    /// @return shares_ The amount of borrow shares minted to represent the borrowed amount
    function borrow(
        uint token0Amt_,
        uint token1Amt_,
        uint maxSharesAmt_,
        address to_
    ) external returns (uint shares_);
    /// @dev This function allows users to payback tokens in any proportion to the debt pool
    /// @param token0Amt_ The amount of token0 to payback
    /// @param token1Amt_ The amount of token1 to payback
    /// @param minSharesAmt_ The minimum amount of shares the user expects to burn
    /// @param estimate_ If true, function will revert with estimated shares without executing the payback
    /// @return shares_ The amount of borrow shares burned for the payback
    function payback(
        uint token0Amt_,
        uint token1Amt_,
        uint minSharesAmt_,
        bool estimate_
    ) external payable returns (uint shares_);
    /// @dev This function allows users to withdraw their collateral with perfect shares in one token
    /// @param shares_ The number of shares to burn for withdrawal
    /// @param minToken0_ The minimum amount of token0 the user expects to receive (set to 0 if withdrawing in token1)
    /// @param minToken1_ The minimum amount of token1 the user expects to receive (set to 0 if withdrawing in token0)
    /// @param to_ Recipient of swapped tokens. If to_ == address(0) then out tokens will be sent to msg.sender. If to_ == ADDRESS_DEAD then function will revert with withdrawAmt_
    /// @return withdrawAmt_ The amount of tokens withdrawn in the chosen token
    function withdrawPerfectInOneToken(
        uint shares_,
        uint minToken0_,
        uint minToken1_,
        address to_
    ) external returns (
        uint withdrawAmt_
    );
    /// @dev This function allows users to payback their debt with perfect shares in one token
    /// @param shares_ The number of shares to burn for payback
    /// @param maxToken0_ The maximum amount of token0 the user is willing to pay (set to 0 if paying back in token1)
    /// @param maxToken1_ The maximum amount of token1 the user is willing to pay (set to 0 if paying back in token0)
    /// @param estimate_ If true, the function will revert with the estimated payback amount without executing the payback
    /// @return paybackAmt_ The amount of tokens paid back in the chosen token
    function paybackPerfectInOneToken(
        uint shares_,
        uint maxToken0_,
        uint maxToken1_,
        bool estimate_
    ) external payable returns (
        uint paybackAmt_
    );
    /// @dev the oracle assumes last set price of pool till the next swap happens.
    /// There's a possibility that during that time some interest is generated hence the last stored price is not the 100% correct price for the whole duration
    /// but the difference due to interest will be super low so this difference is ignored
    /// For example 2 swaps happened 10min (600 seconds) apart and 1 token has 10% higher interest than other.
    /// then that token will accrue about 10% * 600 / secondsInAYear = ~0.0002%
    /// @param secondsAgos_ array of seconds ago for which TWAP is needed. If user sends [10, 30, 60] then twaps_ will return [10-0, 30-10, 60-30]
    /// @return twaps_ twap price, lowest price (aka minima) & highest price (aka maxima) between secondsAgo checkpoints
    /// @return currentPrice_ price of pool after the most recent swap
    function oraclePrice(
        uint[] memory secondsAgos_
    ) external view returns (
        Oracle[] memory twaps_,
        uint currentPrice_
    );
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.21;
import { StorageRead } from "../../../../libraries/storageRead.sol";
interface ITokenDecimals {
    function decimals() external view returns (uint8);
}
abstract contract ConstantVariables is StorageRead {
    /*//////////////////////////////////////////////////////////////
                          CONSTANTS / IMMUTABLES
    //////////////////////////////////////////////////////////////*/
    address internal constant TEAM_MULTISIG = 0x4F6F977aCDD1177DCD81aB83074855EcB9C2D49e;
    address internal constant NATIVE_TOKEN = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;
    uint256 internal constant NATIVE_TOKEN_DECIMALS = 18;
    address internal constant ADDRESS_DEAD = 0x000000000000000000000000000000000000dEaD;
    uint256 internal constant TOKENS_DECIMALS_PRECISION = 12;
    uint256 internal constant TOKENS_DECIMALS = 1e12;
    uint256 internal constant SMALL_COEFFICIENT_SIZE = 10;
    uint256 internal constant DEFAULT_COEFFICIENT_SIZE = 56;
    uint256 internal constant DEFAULT_EXPONENT_SIZE = 8;
    uint256 internal constant DEFAULT_EXPONENT_MASK = 0xFF;
    uint256 internal constant X2 = 0x3;
    uint256 internal constant X3 = 0x7;
    uint256 internal constant X5 = 0x1f;
    uint256 internal constant X7 = 0x7f;
    uint256 internal constant X8 = 0xff;
    uint256 internal constant X9 = 0x1ff;
    uint256 internal constant X10 = 0x3ff;
    uint256 internal constant X11 = 0x7ff;
    uint256 internal constant X14 = 0x3fff;
    uint256 internal constant X16 = 0xffff;
    uint256 internal constant X17 = 0x1ffff;
    uint256 internal constant X18 = 0x3ffff;
    uint256 internal constant X20 = 0xfffff;
    uint256 internal constant X22 = 0x3fffff;
    uint256 internal constant X23 = 0x7fffff;
    uint256 internal constant X24 = 0xffffff;
    uint256 internal constant X28 = 0xfffffff;
    uint256 internal constant X30 = 0x3fffffff;
    uint256 internal constant X32 = 0xffffffff;
    uint256 internal constant X33 = 0x1ffffffff;
    uint256 internal constant X40 = 0xffffffffff;
    uint256 internal constant X64 = 0xffffffffffffffff;
    uint256 internal constant X96 = 0xffffffffffffffffffffffff;
    uint256 internal constant X128 = 0xffffffffffffffffffffffffffffffff;
    uint256 internal constant TWO_DECIMALS = 1e2;
    uint256 internal constant THREE_DECIMALS = 1e3;
    uint256 internal constant FOUR_DECIMALS = 1e4;
    uint256 internal constant FIVE_DECIMALS = 1e5;
    uint256 internal constant SIX_DECIMALS = 1e6;
    uint256 internal constant EIGHT_DECIMALS = 1e8;
    uint256 internal constant NINE_DECIMALS = 1e9;
    uint256 internal constant PRICE_PRECISION = 1e27;
    uint256 internal constant ORACLE_PRECISION = 1e18; // 100%
    uint256 internal constant ORACLE_LIMIT = 5 * 1e16; // 5%
    /// after swap token0 reserves should not be less than token1InToken0 / MINIMUM_LIQUIDITY_SWAP
    /// after swap token1 reserves should not be less than token0InToken1 / MINIMUM_LIQUIDITY_SWAP
    uint256 internal constant MINIMUM_LIQUIDITY_SWAP = 1e4;
    /// after user operations (deposit, withdraw, borrow, payback) token0 reserves should not be less than token1InToken0 / MINIMUM_LIQUIDITY_USER_OPERATIONS
    /// after user operations (deposit, withdraw, borrow, payback) token1 reserves should not be less than token0InToken0 / MINIMUM_LIQUIDITY_USER_OPERATIONS
    uint256 internal constant MINIMUM_LIQUIDITY_USER_OPERATIONS = 1e6;
    /// To skip transfers in liquidity layer if token in & out is same and liquidity layer is on the winning side
    bytes32 internal constant SKIP_TRANSFERS = keccak256(bytes("SKIP_TRANSFERS"));
    function _decimals(address token_) internal view returns (uint256) {
        return (token_ == NATIVE_TOKEN) ? NATIVE_TOKEN_DECIMALS : ITokenDecimals(token_).decimals();
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.21;
abstract contract Variables {
    /*//////////////////////////////////////////////////////////////
                          STORAGE VARIABLES
    //////////////////////////////////////////////////////////////*/
    /// First 1 bit  => 0 => re-entrancy. If 0 then allow transaction to go, else throw.
    /// Next 40 bits => 1-40 => last to last stored price. BigNumber (32 bits precision, 8 bits exponent)
    /// Next 40 bits => 41-80 => last stored price of pool. BigNumber (32 bits precision, 8 bits exponent)
    /// Next 40 bits => 81-120 => center price. Center price from where the ranges will be calculated. BigNumber (32 bits precision, 8 bits exponent)
    /// Next 33 bits => 121-153 => last interaction time stamp
    /// Next 22 bits => 154-175 => max 4194303 seconds (~1165 hrs, ~48.5 days), time difference between last to last and last price stored
    /// Next 3 bits  => 176-178 => oracle checkpoint, if 0 then first slot, if 7 then last slot
    /// Next 16 bits => 179-194 => current mapping or oracle, after every 8 transaction it will increase by 1. Max capacity is 65535 but it can be lower than that check dexVariables2
    /// Next 1 bit  => 195 => is oracle active?
    uint internal dexVariables;
    /// Next  1 bit  => 0 => is smart collateral enabled?
    /// Next  1 bit  => 1 => is smart debt enabled?
    /// Next 17 bits => 2-18 => fee (1% = 10000, max value: 100000 = 10%, fee should not be more than 10%)
    /// Next  7 bits => 19-25 => revenue cut from fee (1 = 1%, 100 = 100%). If fee is 1000 = 0.1% and revenue cut is 10 = 10% then governance get 0.01% of every swap
    /// Next  1 bit  => 26 => percent active change going on or not, 0 = false, 1 = true, if true than that means governance has updated the below percents and the update should happen with a specified time.
    /// Next 20 bits => 27-46 => upperPercent (1% = 10000, max value: 104.8575%) upperRange - upperRange * upperPercent = centerPrice. Hence, upperRange = centerPrice / (1 - upperPercent)
    /// Next 20 bits => 47-66 => lowerPercent. lowerRange = centerPrice - centerPrice * lowerPercent.
    /// Next  1 bit  => 67 => threshold percent active change going on or not, 0 = false, 1 = true, if true than that means governance has updated the below percents and the update should happen with a specified time.
    /// Next 10 bits => 68-77 => upper shift threshold percent, 1 = 0.1%. 1000 = 100%. if currentPrice > (centerPrice + (upperRange - centerPrice) * (1000 - upperShiftThresholdPercent) / 1000) then trigger shift
    /// Next 10 bits => 78-87 => lower shift threshold percent, 1 = 0.1%. 1000 = 100%. if currentPrice < (centerPrice - (centerPrice - lowerRange) * (1000 - lowerShiftThresholdPercent) / 1000) then trigger shift
    /// Next 24 bits => 88-111 => Shifting time (~194 days) (rate = (% up + % down) / time ?)
    /// Next 30 bits => 112-131 => Address of center price if center price should be fetched externally, for example, for wstETH <> ETH pool, fetch wstETH exchange rate into stETH from wstETH contract.
    /// Why fetch it externally? Because let's say pool width is 0.1% and wstETH temporarily got depeg of 0.5% then pool will start to shift to newer pricing
    /// but we don't want pool to shift to 0.5% because we know the depeg will recover so to avoid the loss for users.
    /// Next 30 bits => 142-171 => Hooks bits, calculate hook address by storing deployment nonce from factory.
    /// Next 28 bits => 172-199 => max center price. BigNumber (20 bits precision, 8 bits exponent)
    /// Next 28 bits => 200-227 => min center price. BigNumber (20 bits precision, 8 bits exponent)
    /// Next 10 bits => 228-237 => utilization limit of token0. Max value 1000 = 100%, if 100% then no need to check the utilization.
    /// Next 10 bits => 238-247 => utilization limit of token1. Max value 1000 = 100%, if 100% then no need to check the utilization.
    /// Next 1  bit  => 248     => is center price shift active
    /// Last 1  bit  => 255     => Pause swap & arbitrage (only perfect functions will be usable), if we need to pause entire DEX then that can be done through pausing DEX on Liquidity Layer
    uint internal dexVariables2;
    /// first 128 bits => 0-127 => total supply shares
    /// last 128 bits => 128-255 => max supply shares
    uint internal _totalSupplyShares;
    /// @dev user supply data: user -> data
    /// Aside from 1st bit, entire bits here are same as liquidity layer _userSupplyData. Hence exact same supply & borrow limit library can be used
    /// First  1 bit  =>       0 => is user allowed to supply? 0 = not allowed, 1 = allowed
    /// Next  64 bits =>   1- 64 => user supply amount/shares; BigMath: 56 | 8
    /// Next  64 bits =>  65-128 => previous user withdrawal limit; BigMath: 56 | 8
    /// Next  33 bits => 129-161 => last triggered process timestamp (enough until 16 March 2242 -> max value 8589934591)
    /// Next  14 bits => 162-175 => expand withdrawal limit percentage (in 1e2: 100% = 10_000; 1% = 100 -> max value 16_383).
    ///                             @dev shrinking is instant
    /// Next  24 bits => 176-199 => withdrawal limit expand duration in seconds.(Max value 16_777_215; ~4_660 hours, ~194 days)
    /// Next  18 bits => 200-217 => base withdrawal limit: below this, 100% withdrawals can be done (aka shares can be burned); BigMath: 10 | 8
    /// Next  38 bits => 218-255 => empty for future use
    mapping(address => uint) internal _userSupplyData;
    /// first 128 bits => 0-127 => total borrow shares
    /// last 128 bits => 128-255 => max borrow shares
    uint internal _totalBorrowShares;
    /// @dev user borrow data: user -> data
    /// Aside from 1st bit, entire bits here are same as liquidity layer _userBorrowData. Hence exact same supply & borrow limit library function can be used
    /// First  1 bit  =>       0 => is user allowed to borrow? 0 = not allowed, 1 = allowed
    /// Next  64 bits =>   1- 64 => user debt amount/shares; BigMath: 56 | 8
    /// Next  64 bits =>  65-128 => previous user debt ceiling; BigMath: 56 | 8
    /// Next  33 bits => 129-161 => last triggered process timestamp (enough until 16 March 2242 -> max value 8589934591)
    /// Next  14 bits => 162-175 => expand debt ceiling percentage (in 1e2: 100% = 10_000; 1% = 100 -> max value 16_383)
    ///                             @dev shrinking is instant
    /// Next  24 bits => 176-199 => debt ceiling expand duration in seconds (Max value 16_777_215; ~4_660 hours, ~194 days)
    /// Next  18 bits => 200-217 => base debt ceiling: below this, there's no debt ceiling limits; BigMath: 10 | 8
    /// Next  18 bits => 218-235 => max debt ceiling: absolute maximum debt ceiling can expand to; BigMath: 10 | 8
    /// Next  20 bits => 236-255 => empty for future use
    mapping(address => uint) internal _userBorrowData;
    /// Price difference between last swap of last block & last swap of new block
    /// If last swap happened at Block B - 4 and next swap happened after 4 blocks at Block B then it will store that difference
    /// considering time difference between these 4 blocks is 48 seconds, hence time will be stored as 48
    /// New oracle update:
    /// time to 9 bits and precision to 22 bits
    /// if time exceeds 9 bits which is 511 sec or ~8.5 min then we will use 2 oracle slot to store the data
    /// we will leave the both time slot as 0 and on first sign + precision slot we will store time and
    /// on second sign + precision slot we will store sign & precision
    /// First 9 bits =>   0-  8 => time, 511 seconds
    /// Next   1 bit  =>  9     => sign of percent in change, if 1 then 0 or positive, else negative
    /// Next  22 bits =>  10- 31 => 4194303, change in price, max change is capped to 5%, so 4194303 = 5%, 1 = 0.0000011920931797249746%
    /// Next  9 bits =>  32- 40 => time, 511 seconds
    /// Next   1 bit  =>  41     => sign of percent in change, if 1 then 0 or positive, else negative
    /// Next  22 bits =>  42- 63 => 4194303, change in price, max change is capped to 5%, so 4194303 = 5%, 1 = 0.0000011920931797249746%
    /// Next  9 bits =>  64- 72 => time, 511 seconds
    /// Next   1 bit  =>  73     => sign of percent in change, if 1 then 0 or positive, else negative
    /// Next  22 bits =>  74- 95 => 4194303, change in price, max change is capped to 5%, so 4194303 = 5%, 1 = 0.0000011920931797249746%
    /// Next  9 bits =>  96-104 => time, 511 seconds
    /// Next   1 bit  => 105     => sign of percent in change, if 1 then 0 or positive, else negative
    /// Next  22 bits => 106-127 => 4194303, change in price, max change is capped to 5%, so 4194303 = 5%, 1 = 0.0000011920931797249746%
    /// Next  9 bits => 128-136 => time, 511 seconds
    /// Next   1 bit  => 137     => sign of percent in change, if 1 then 0 or positive, else negative
    /// Next  22 bits => 138-159 => 4194303, change in price, max change is capped to 5%, so 4194303 = 5%, 1 = 0.0000011920931797249746%
    /// Next  9 bits => 160-168 => time, 511 seconds
    /// Next   1 bit  => 169     => sign of percent in change, if 1 then 0 or positive, else negative
    /// Next  22 bits => 170-191 => 4194303, change in price, max change is capped to 5%, so 4194303 = 5%, 1 = 0.0000011920931797249746%
    /// Next  9 bits => 192-200 => time, 511 seconds
    /// Next   1 bit  => 201     => sign of percent in change, if 1 then 0 or positive, else negative
    /// Next  22 bits => 202-223 => 4194303, change in price, max change is capped to 5%, so 4194303 = 5%, 1 = 0.0000011920931797249746%
    /// Next  9 bits => 224-232 => time, 511 seconds
    /// Next   1 bit  => 233     => sign of percent in change, if 1 then 0 or positive, else negative
    /// Next  22 bits => 234-255 => 4194303, change in price, max change is capped to 5%, so 4194303 = 5%, 1 = 0.0000011920931797249746%
    mapping(uint => uint) internal _oracle;
    /// First 20 bits =>  0-19 => old upper shift
    /// Next  20 bits => 20-39 => old lower shift
    /// Next  20 bits => 40-59 => in seconds, ~12 days max, shift can last for max ~12 days
    /// Next  33 bits => 60-92 => timestamp of when the shift has started.
    uint128 internal _rangeShift;
    /// First 10 bits =>  0- 9 => old upper shift
    /// Next  10 bits => 10-19 => empty so we can use same helper function
    /// Next  10 bits => 20-29 => old lower shift
    /// Next  10 bits => 30-39 => empty so we can use same helper function
    /// Next  20 bits => 40-59 => in seconds, ~12 days max, shift can last for max ~12 days
    /// Next  33 bits => 60-92 => timestamp of when the shift has started.
    /// Next  24 bits => 93-116 => old threshold time
    uint128 internal _thresholdShift;
    /// Shifting is fuzzy and with time it'll keep on getting closer and then eventually get over
    /// First 33 bits => 0 -32 => starting timestamp
    /// Next  20 bits => 33-52 => % shift
    /// Next  20 bits => 53-72 => time to shift that percent
    uint256 internal _centerPriceShift;
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.21;
import { CoreHelpers } from "../helpers/coreHelpers.sol";
import { SafeTransfer } from "../../../../../libraries/safeTransfer.sol";
import { DexSlotsLink } from "../../../../../libraries/dexSlotsLink.sol";
import { DexCalcs } from "../../../../../libraries/dexCalcs.sol";
import { BigMathMinified } from "../../../../../libraries/bigMathMinified.sol";
import { ErrorTypes } from "../../../errorTypes.sol";
import { IFluidDexT1 } from "../../../interfaces/iDexT1.sol";
interface IDexCallback {
    function dexCallback(address token_, uint256 amount_) external;
}
/// @title FluidDexT1
/// @notice Implements core logics for Fluid Dex protocol.
/// Note Token transfers happen directly from user to Liquidity contract and vice-versa.
contract FluidDexT1 is CoreHelpers {
    using BigMathMinified for uint256;
    constructor(ConstantViews memory constantViews_) CoreHelpers(constantViews_) {
        // any implementations should not be zero
        if (
            constantViews_.implementations.shift == address(0) ||
            constantViews_.implementations.admin == address(0) ||
            constantViews_.implementations.colOperations == address(0) ||
            constantViews_.implementations.debtOperations == address(0) ||
            constantViews_.implementations.perfectOperationsAndSwapOut == address(0)
        ) {
            revert FluidDexError(ErrorTypes.DexT1__InvalidImplementation);
        }
    }
    struct SwapInExtras {
        address to;
        uint amountOutMin;
        bool isCallback;
    }
    /// @dev This function allows users to swap a specific amount of input tokens for output tokens
    /// @param swap0to1_ Direction of swap. If true, swaps token0 for token1; if false, swaps token1 for token0
    /// @param amountIn_ The exact amount of input tokens to swap
    /// @param extras_ Additional parameters for the swap:
    ///   - to: Recipient of swapped tokens. If to_ == address(0) then out tokens will be sent to msg.sender. If to_ == ADDRESS_DEAD then function will revert with amountOut_
    ///   - amountOutMin: The minimum amount of output tokens the user expects to receive
    ///   - isCallback: If true, indicates that the input tokens should be transferred via a callback
    /// @return amountOut_ The amount of output tokens received from the swap
    function _swapIn(
        bool swap0to1_,
        uint256 amountIn_,
        SwapInExtras memory extras_
    ) internal returns (uint256 amountOut_) {
        uint dexVariables_ = dexVariables;
        uint dexVariables2_ = dexVariables2;
        if ((dexVariables2_ >> 255) == 1) revert FluidDexError(ErrorTypes.DexT1__SwapAndArbitragePaused);
        _check(dexVariables_, dexVariables2_);
        if (extras_.to == address(0)) extras_.to = msg.sender;
        SwapInMemory memory s_;
        if (swap0to1_) {
            (s_.tokenIn, s_.tokenOut) = (TOKEN_0, TOKEN_1);
            unchecked {
                s_.amtInAdjusted = (amountIn_ * TOKEN_0_NUMERATOR_PRECISION) / TOKEN_0_DENOMINATOR_PRECISION;
            }
        } else {
            (s_.tokenIn, s_.tokenOut) = (TOKEN_1, TOKEN_0);
            unchecked {
                s_.amtInAdjusted = (amountIn_ * TOKEN_1_NUMERATOR_PRECISION) / TOKEN_1_DENOMINATOR_PRECISION;
            }
        }
        _verifySwapAndNonPerfectActions(s_.amtInAdjusted, amountIn_);
        PricesAndExchangePrice memory pex_ = _getPricesAndExchangePrices(dexVariables_, dexVariables2_);
        if (msg.value > 0) {
            if (msg.value != amountIn_) revert FluidDexError(ErrorTypes.DexT1__EthAndAmountInMisMatch);
            if (s_.tokenIn != NATIVE_TOKEN) revert FluidDexError(ErrorTypes.DexT1__EthSentForNonNativeSwap);
        }
        // is smart collateral pool enabled
        uint temp_ = dexVariables2_ & 1;
        // is smart debt pool enabled
        uint temp2_ = (dexVariables2_ >> 1) & 1;
        uint temp3_;
        uint temp4_;
        // extracting fee
        temp3_ = ((dexVariables2_ >> 2) & X17);
        unchecked {
            // revenueCut in 6 decimals, to have proper precision
            // if fee = 1% and revenue cut = 10% then revenueCut = 1e8 - (10000 * 10) = 99900000
            s_.revenueCut = EIGHT_DECIMALS - ((((dexVariables2_ >> 19) & X7) * temp3_));
            // fee in 4 decimals
            // 1 - fee. If fee is 1% then withoutFee will be 1e6 - 1e4
            // s_.fee => 1 - withdraw fee
            s_.fee = SIX_DECIMALS - temp3_;
        }
        CollateralReservesSwap memory cs_;
        DebtReservesSwap memory ds_;
        if (temp_ == 1) {
            // smart collateral is enabled
            {
                CollateralReserves memory c_ = _getCollateralReserves(
                    pex_.geometricMean,
                    pex_.upperRange,
                    pex_.lowerRange,
                    pex_.supplyToken0ExchangePrice,
                    pex_.supplyToken1ExchangePrice
                );
                if (swap0to1_) {
                    (
                        cs_.tokenInRealReserves,
                        cs_.tokenOutRealReserves,
                        cs_.tokenInImaginaryReserves,
                        cs_.tokenOutImaginaryReserves
                    ) = (
                        c_.token0RealReserves,
                        c_.token1RealReserves,
                        c_.token0ImaginaryReserves,
                        c_.token1ImaginaryReserves
                    );
                } else {
                    (
                        cs_.tokenInRealReserves,
                        cs_.tokenOutRealReserves,
                        cs_.tokenInImaginaryReserves,
                        cs_.tokenOutImaginaryReserves
                    ) = (
                        c_.token1RealReserves,
                        c_.token0RealReserves,
                        c_.token1ImaginaryReserves,
                        c_.token0ImaginaryReserves
                    );
                }
            }
        }
        if (temp2_ == 1) {
            // smart debt is enabled
            {
                DebtReserves memory d_ = _getDebtReserves(
                    pex_.geometricMean,
                    pex_.upperRange,
                    pex_.lowerRange,
                    pex_.borrowToken0ExchangePrice,
                    pex_.borrowToken1ExchangePrice
                );
                if (swap0to1_) {
                    (
                        ds_.tokenInDebt,
                        ds_.tokenOutDebt,
                        ds_.tokenInRealReserves,
                        ds_.tokenOutRealReserves,
                        ds_.tokenInImaginaryReserves,
                        ds_.tokenOutImaginaryReserves
                    ) = (
                        d_.token0Debt,
                        d_.token1Debt,
                        d_.token0RealReserves,
                        d_.token1RealReserves,
                        d_.token0ImaginaryReserves,
                        d_.token1ImaginaryReserves
                    );
                } else {
                    (
                        ds_.tokenInDebt,
                        ds_.tokenOutDebt,
                        ds_.tokenInRealReserves,
                        ds_.tokenOutRealReserves,
                        ds_.tokenInImaginaryReserves,
                        ds_.tokenOutImaginaryReserves
                    ) = (
                        d_.token1Debt,
                        d_.token0Debt,
                        d_.token1RealReserves,
                        d_.token0RealReserves,
                        d_.token1ImaginaryReserves,
                        d_.token0ImaginaryReserves
                    );
                }
            }
        }
        // limiting amtInAdjusted to be not more than 50% of both (collateral & debt) imaginary tokenIn reserves combined
        // basically, if this throws that means user is trying to swap 0.5x tokenIn if current tokenIn imaginary reserves is x
        // let's take x as token0 here, that means, initially the pool pricing might be:
        // token1Reserve / x and new pool pricing will become token1Reserve / 1.5x (token1Reserve will decrease after swap but for simplicity ignoring that)
        // So pool price is decreased by ~33.33% (oracle will throw error in this case as it only allows 5% price difference but better to limit it before hand)
        unchecked {
            if (s_.amtInAdjusted > ((cs_.tokenInImaginaryReserves + ds_.tokenInImaginaryReserves) / 2))
                revert FluidDexError(ErrorTypes.DexT1__SwapInLimitingAmounts);
        }
        if (temp_ == 1 && temp2_ == 1) {
            // unless both pools are enabled s_.swapRoutingAmt will be 0
            s_.swapRoutingAmt = _swapRoutingIn(
                s_.amtInAdjusted,
                cs_.tokenOutImaginaryReserves,
                cs_.tokenInImaginaryReserves,
                ds_.tokenOutImaginaryReserves,
                ds_.tokenInImaginaryReserves
            );
        }
        // In below if else statement temps are:
        // temp_ => deposit amt
        // temp2_ => withdraw amt
        // temp3_ => payback amt
        // temp4_ => borrow amt
        if (int(s_.amtInAdjusted) > s_.swapRoutingAmt && s_.swapRoutingAmt > 0) {
            // swap will route from the both pools
            // temp_ = amountInCol_
            temp_ = uint(s_.swapRoutingAmt);
            unchecked {
                // temp3_ = amountInDebt_
                temp3_ = s_.amtInAdjusted - temp_;
            }
            (temp2_, temp4_) = (0, 0);
            // debt pool price will be the same as collateral pool after the swap
            s_.withdrawTo = extras_.to;
            s_.borrowTo = extras_.to;
        } else if ((temp_ == 1 && temp2_ == 0) || (s_.swapRoutingAmt >= int(s_.amtInAdjusted))) {
            // entire swap will route through collateral pool
            (temp_, temp2_, temp3_, temp4_) = (s_.amtInAdjusted, 0, 0, 0);
            // price can slightly differ from debt pool but difference will be very small. Probably <0.01% for active DEX pools.
            s_.withdrawTo = extras_.to;
        } else if ((temp_ == 0 && temp2_ == 1) || (s_.swapRoutingAmt <= 0)) {
            // entire swap will route through debt pool
            (temp_, temp2_, temp3_, temp4_) = (0, 0, s_.amtInAdjusted, 0);
            // price can slightly differ from collateral pool but difference will be very small. Probably <0.01% for active DEX pools.
            s_.borrowTo = extras_.to;
        } else {
            // swap should never reach this point but if it does then reverting
            revert FluidDexError(ErrorTypes.DexT1__NoSwapRoute);
        }
        if (temp_ > 0) {
            // temp2_ = amountOutCol_
            temp2_ = _getAmountOut(
                ((temp_ * s_.fee) / SIX_DECIMALS),
                cs_.tokenInImaginaryReserves,
                cs_.tokenOutImaginaryReserves
            );
            swap0to1_
                ? _verifyToken1Reserves(
                    (cs_.tokenInRealReserves + temp_),
                    (cs_.tokenOutRealReserves - temp2_),
                    pex_.centerPrice,
                    MINIMUM_LIQUIDITY_SWAP
                )
                : _verifyToken0Reserves(
                    (cs_.tokenOutRealReserves - temp2_),
                    (cs_.tokenInRealReserves + temp_),
                    pex_.centerPrice,
                    MINIMUM_LIQUIDITY_SWAP
                );
        }
        if (temp3_ > 0) {
            // temp4_ = amountOutDebt_
            temp4_ = _getAmountOut(
                ((temp3_ * s_.fee) / SIX_DECIMALS),
                ds_.tokenInImaginaryReserves,
                ds_.tokenOutImaginaryReserves
            );
            swap0to1_
                ? _verifyToken1Reserves(
                    (ds_.tokenInRealReserves + temp3_),
                    (ds_.tokenOutRealReserves - temp4_),
                    pex_.centerPrice,
                    MINIMUM_LIQUIDITY_SWAP
                )
                : _verifyToken0Reserves(
                    (ds_.tokenOutRealReserves - temp4_),
                    (ds_.tokenInRealReserves + temp3_),
                    pex_.centerPrice,
                    MINIMUM_LIQUIDITY_SWAP
                );
        }
        // (temp_ + temp3_) == amountIn_ == msg.value (for native token), if there is revenue cut then this statement is not true
        temp_ = (temp_ * s_.revenueCut) / EIGHT_DECIMALS;
        temp3_ = (temp3_ * s_.revenueCut) / EIGHT_DECIMALS;
        // from whatever pool higher amount of swap is routing we are taking that as final price, does not matter much because both pools final price should be same
        if (temp_ > temp3_) {
            // new pool price from col pool
            s_.price = swap0to1_
                ? ((cs_.tokenOutImaginaryReserves - temp2_) * 1e27) / (cs_.tokenInImaginaryReserves + temp_)
                : ((cs_.tokenInImaginaryReserves + temp_) * 1e27) / (cs_.tokenOutImaginaryReserves - temp2_);
        } else {
            // new pool price from debt pool
            s_.price = swap0to1_
                ? ((ds_.tokenOutImaginaryReserves - temp4_) * 1e27) / (ds_.tokenInImaginaryReserves + temp3_)
                : ((ds_.tokenInImaginaryReserves + temp3_) * 1e27) / (ds_.tokenOutImaginaryReserves - temp4_);
        }
        // converting into normal token amounts
        if (swap0to1_) {
            temp_ = ((temp_ * TOKEN_0_DENOMINATOR_PRECISION) / TOKEN_0_NUMERATOR_PRECISION);
            temp3_ = ((temp3_ * TOKEN_0_DENOMINATOR_PRECISION) / TOKEN_0_NUMERATOR_PRECISION);
            // only adding uncheck in out amount
            unchecked {
                temp2_ = ((temp2_ * TOKEN_1_DENOMINATOR_PRECISION) / TOKEN_1_NUMERATOR_PRECISION);
                temp4_ = ((temp4_ * TOKEN_1_DENOMINATOR_PRECISION) / TOKEN_1_NUMERATOR_PRECISION);
            }
        } else {
            temp_ = ((temp_ * TOKEN_1_DENOMINATOR_PRECISION) / TOKEN_1_NUMERATOR_PRECISION);
            temp3_ = ((temp3_ * TOKEN_1_DENOMINATOR_PRECISION) / TOKEN_1_NUMERATOR_PRECISION);
            // only adding uncheck in out amount
            unchecked {
                temp2_ = ((temp2_ * TOKEN_0_DENOMINATOR_PRECISION) / TOKEN_0_NUMERATOR_PRECISION);
                temp4_ = ((temp4_ * TOKEN_0_DENOMINATOR_PRECISION) / TOKEN_0_NUMERATOR_PRECISION);
            }
        }
        unchecked {
            amountOut_ = temp2_ + temp4_;
        }
        // if address dead then reverting with amountOut
        if (extras_.to == ADDRESS_DEAD) revert FluidDexSwapResult(amountOut_);
        if (amountOut_ < extras_.amountOutMin) revert FluidDexError(ErrorTypes.DexT1__NotEnoughAmountOut);
        // allocating to avoid stack-too-deep error
        // not setting in the callbackData as last 2nd to avoid SKIP_TRANSFERS clashing
        s_.data = abi.encode(amountIn_, extras_.isCallback, msg.sender); // true/false is to decide if dex should do callback or directly transfer from user
        // deposit & payback token in at liquidity
        LIQUIDITY.operate{ value: msg.value }(s_.tokenIn, int(temp_), -int(temp3_), address(0), address(0), s_.data);
        // withdraw & borrow token out at liquidity
        LIQUIDITY.operate(s_.tokenOut, -int(temp2_), int(temp4_), s_.withdrawTo, s_.borrowTo, new bytes(0));
        // if hook exists then calling hook
        temp_ = (dexVariables2_ >> 142) & X30;
        if (temp_ > 0) {
            s_.swap0to1 = swap0to1_;
            _hookVerify(temp_, 1, s_.swap0to1, s_.price);
        }
        swap0to1_
            ? _utilizationVerify(((dexVariables2_ >> 238) & X10), EXCHANGE_PRICE_TOKEN_1_SLOT)
            : _utilizationVerify(((dexVariables2_ >> 228) & X10), EXCHANGE_PRICE_TOKEN_0_SLOT);
        dexVariables = _updateOracle(s_.price, pex_.centerPrice, dexVariables_);
        emit Swap(swap0to1_, amountIn_, amountOut_, extras_.to);
    }
    /// @dev Swap tokens with perfect amount in
    /// @param swap0to1_ Direction of swap. If true, swaps token0 for token1; if false, swaps token1 for token0
    /// @param amountIn_ The exact amount of tokens to swap in
    /// @param amountOutMin_ The minimum amount of tokens to receive after swap
    /// @param to_ Recipient of swapped tokens. If to_ == address(0) then out tokens will be sent to msg.sender. If to_ == ADDRESS_DEAD then function will revert with amountOut_
    /// @return amountOut_ The amount of output tokens received from the swap
    function swapIn(
        bool swap0to1_,
        uint256 amountIn_,
        uint256 amountOutMin_,
        address to_
    ) public payable returns (uint256 amountOut_) {
        return _swapIn(swap0to1_, amountIn_, SwapInExtras(to_, amountOutMin_, false));
    }
    /// @dev Swap tokens with perfect amount in and callback functionality
    /// @param swap0to1_ Direction of swap. If true, swaps token0 for token1; if false, swaps token1 for token0
    /// @param amountIn_ The exact amount of tokens to swap in
    /// @param amountOutMin_ The minimum amount of tokens to receive after swap
    /// @param to_ Recipient of swapped tokens. If to_ == address(0) then out tokens will be sent to msg.sender. If to_ == ADDRESS_DEAD then function will revert with amountOut_
    /// @return amountOut_ The amount of output tokens received from the swap
    function swapInWithCallback(
        bool swap0to1_,
        uint256 amountIn_,
        uint256 amountOutMin_,
        address to_
    ) public payable returns (uint256 amountOut_) {
        return _swapIn(swap0to1_, amountIn_, SwapInExtras(to_, amountOutMin_, true));
    }
    /// @dev Swap tokens with perfect amount out
    /// @param swap0to1_ Direction of swap. If true, swaps token0 for token1; if false, swaps token1 for token0
    /// @param amountOut_ The exact amount of tokens to receive after swap
    /// @param amountInMax_ Maximum amount of tokens to swap in
    /// @param to_ Recipient of swapped tokens. If to_ == address(0) then out tokens will be sent to msg.sender. If to_ == ADDRESS_DEAD then function will revert with amountIn_
    /// @return amountIn_ The amount of input tokens used for the swap
    function swapOut(
        bool swap0to1_,
        uint256 amountOut_,
        uint256 amountInMax_,
        address to_
    ) public payable returns (uint256 amountIn_) {
        return abi.decode(_spell(PERFECT_OPERATIONS_AND_SWAP_OUT_IMPLEMENTATION, msg.data), (uint256));
    }
    /// @dev Swap tokens with perfect amount out and callback functionality
    /// @param swap0to1_ Direction of swap. If true, swaps token0 for token1; if false, swaps token1 for token0
    /// @param amountOut_ The exact amount of tokens to receive after swap
    /// @param amountInMax_ Maximum amount of tokens to swap in
    /// @param to_ Recipient of swapped tokens. If to_ == address(0) then out tokens will be sent to msg.sender. If to_ == ADDRESS_DEAD then function will revert with amountIn_
    /// @return amountIn_ The amount of input tokens used for the swap
    function swapOutWithCallback(
        bool swap0to1_,
        uint256 amountOut_,
        uint256 amountInMax_,
        address to_
    ) public payable returns (uint256 amountIn_) {
        return abi.decode(_spell(PERFECT_OPERATIONS_AND_SWAP_OUT_IMPLEMENTATION, msg.data), (uint256));
    }
    /// @dev Deposit tokens in equal proportion to the current pool ratio
    /// @param shares_ The number of shares to mint
    /// @param maxToken0Deposit_ Maximum amount of token0 to deposit
    /// @param maxToken1Deposit_ Maximum amount of token1 to deposit
    /// @param estimate_ If true, function will revert with estimated deposit amounts without executing the deposit
    /// @return token0Amt_ Amount of token0 deposited
    /// @return token1Amt_ Amount of token1 deposited
    function depositPerfect(
        uint shares_,
        uint maxToken0Deposit_,
        uint maxToken1Deposit_,
        bool estimate_
    ) public payable returns (uint token0Amt_, uint token1Amt_) {
        return abi.decode(_spell(PERFECT_OPERATIONS_AND_SWAP_OUT_IMPLEMENTATION, msg.data), (uint256, uint256));
    }
    /// @dev This function allows users to withdraw a perfect amount of collateral liquidity
    /// @param shares_ The number of shares to withdraw
    /// @param minToken0Withdraw_ The minimum amount of token0 the user is willing to accept
    /// @param minToken1Withdraw_ The minimum amount of token1 the user is willing to accept
    /// @param to_ Recipient of withdrawn tokens. If to_ == address(0) then out tokens will be sent to msg.sender. If to_ == ADDRESS_DEAD then function will revert with token0Amt_ & token1Amt_
    /// @return token0Amt_ The amount of token0 withdrawn
    /// @return token1Amt_ The amount of token1 withdrawn
    function withdrawPerfect(
        uint shares_,
        uint minToken0Withdraw_,
        uint minToken1Withdraw_,
        address to_
    ) public returns (uint token0Amt_, uint token1Amt_) {
        return abi.decode(_spell(PERFECT_OPERATIONS_AND_SWAP_OUT_IMPLEMENTATION, msg.data), (uint256, uint256));
    }
    /// @dev This function allows users to borrow tokens in equal proportion to the current debt pool ratio
    /// @param shares_ The number of shares to borrow
    /// @param minToken0Borrow_ Minimum amount of token0 to borrow
    /// @param minToken1Borrow_ Minimum amount of token1 to borrow
    /// @param to_ Recipient of borrowed tokens. If to_ == address(0) then out tokens will be sent to msg.sender. If to_ == ADDRESS_DEAD then function will revert with token0Amt_ & token1Amt_
    /// @return token0Amt_ Amount of token0 borrowed
    /// @return token1Amt_ Amount of token1 borrowed
    function borrowPerfect(
        uint shares_,
        uint minToken0Borrow_,
        uint minToken1Borrow_,
        address to_
    ) public returns (uint token0Amt_, uint token1Amt_) {
        return abi.decode(_spell(PERFECT_OPERATIONS_AND_SWAP_OUT_IMPLEMENTATION, msg.data), (uint256, uint256));
    }
    /// @dev This function allows users to pay back borrowed tokens in equal proportion to the current debt pool ratio
    /// @param shares_ The number of shares to pay back
    /// @param maxToken0Payback_ Maximum amount of token0 to pay back
    /// @param maxToken1Payback_ Maximum amount of token1 to pay back
    /// @param estimate_ If true, function will revert with estimated payback amounts without executing the payback
    /// @return token0Amt_ Amount of token0 paid back
    /// @return token1Amt_ Amount of token1 paid back
    function paybackPerfect(
        uint shares_,
        uint maxToken0Payback_,
        uint maxToken1Payback_,
        bool estimate_
    ) public payable returns (uint token0Amt_, uint token1Amt_) {
        return abi.decode(_spell(PERFECT_OPERATIONS_AND_SWAP_OUT_IMPLEMENTATION, msg.data), (uint256, uint256));
    }
    /// @dev This function allows users to deposit tokens in any proportion into the col pool
    /// @param token0Amt_ The amount of token0 to deposit
    /// @param token1Amt_ The amount of token1 to deposit
    /// @param minSharesAmt_ The minimum amount of shares the user expects to receive
    /// @param estimate_ If true, function will revert with estimated shares without executing the deposit
    /// @return shares_ The amount of shares minted for the deposit
    function deposit(
        uint token0Amt_,
        uint token1Amt_,
        uint minSharesAmt_,
        bool estimate_
    ) public payable returns (uint shares_) {
        return abi.decode(_spell(COL_OPERATIONS_IMPLEMENTATION, msg.data), (uint256));
    }
    /// @dev This function allows users to withdraw tokens in any proportion from the col pool
    /// @param token0Amt_ The amount of token0 to withdraw
    /// @param token1Amt_ The amount of token1 to withdraw
    /// @param maxSharesAmt_ The maximum number of shares the user is willing to burn
    /// @param to_ Recipient of withdrawn tokens. If to_ == address(0) then out tokens will be sent to msg.sender. If to_ == ADDRESS_DEAD then function will revert with shares_
    /// @return shares_ The number of shares burned for the withdrawal
    function withdraw(
        uint token0Amt_,
        uint token1Amt_,
        uint maxSharesAmt_,
        address to_
    ) public returns (uint shares_) {
        return abi.decode(_spell(COL_OPERATIONS_IMPLEMENTATION, msg.data), (uint256));
    }
    /// @dev This function allows users to borrow tokens in any proportion from the debt pool
    /// @param token0Amt_ The amount of token0 to borrow
    /// @param token1Amt_ The amount of token1 to borrow
    /// @param maxSharesAmt_ The maximum amount of shares the user is willing to receive
    /// @param to_ Recipient of borrowed tokens. If to_ == address(0) then out tokens will be sent to msg.sender. If to_ == ADDRESS_DEAD then function will revert with shares_
    /// @return shares_ The amount of borrow shares minted to represent the borrowed amount
    function borrow(
        uint token0Amt_,
        uint token1Amt_,
        uint maxSharesAmt_,
        address to_
    ) public returns (uint shares_) {
        return abi.decode(_spell(DEBT_OPERATIONS_IMPLEMENTATION, msg.data), (uint256));
    }
    /// @dev This function allows users to payback tokens in any proportion to the debt pool
    /// @param token0Amt_ The amount of token0 to payback
    /// @param token1Amt_ The amount of token1 to payback
    /// @param minSharesAmt_ The minimum amount of shares the user expects to burn
    /// @param estimate_ If true, function will revert with estimated shares without executing the payback
    /// @return shares_ The amount of borrow shares burned for the payback
    function payback(
        uint token0Amt_,
        uint token1Amt_,
        uint minSharesAmt_,
        bool estimate_
    ) public payable returns (uint shares_) {
        return abi.decode(_spell(DEBT_OPERATIONS_IMPLEMENTATION, msg.data), (uint256));
    }
    /// @dev This function allows users to withdraw their collateral with perfect shares in one token
    /// @param shares_ The number of shares to burn for withdrawal
    /// @param minToken0_ The minimum amount of token0 the user expects to receive (set to 0 if withdrawing in token1)
    /// @param minToken1_ The minimum amount of token1 the user expects to receive (set to 0 if withdrawing in token0)
    /// @param to_ Recipient of withdrawn tokens. If to_ == address(0) then out tokens will be sent to msg.sender. If to_ == ADDRESS_DEAD then function will revert with withdrawAmt_
    /// @return withdrawAmt_ The amount of tokens withdrawn in the chosen token
    function withdrawPerfectInOneToken(
        uint shares_,
        uint minToken0_,
        uint minToken1_,
        address to_
    ) public returns (uint withdrawAmt_) {
        return abi.decode(_spell(COL_OPERATIONS_IMPLEMENTATION, msg.data), (uint256));
    }
    /// @dev This function allows users to payback their debt with perfect shares in one token
    /// @param shares_ The number of shares to burn for payback
    /// @param maxToken0_ The maximum amount of token0 the user is willing to pay (set to 0 if paying back in token1)
    /// @param maxToken1_ The maximum amount of token1 the user is willing to pay (set to 0 if paying back in token0)
    /// @param estimate_ If true, the function will revert with the estimated payback amount without executing the payback
    /// @return paybackAmt_ The amount of tokens paid back in the chosen token
    function paybackPerfectInOneToken(
        uint shares_,
        uint maxToken0_,
        uint maxToken1_,
        bool estimate_
    ) public payable returns (uint paybackAmt_) {
        return abi.decode(_spell(DEBT_OPERATIONS_IMPLEMENTATION, msg.data), (uint256));
    }
    /// @dev liquidity callback for cheaper token transfers in case of deposit or payback.
    /// only callable by Liquidity during an operation.
    function liquidityCallback(address token_, uint amount_, bytes calldata data_) external {
        if (msg.sender != address(LIQUIDITY)) revert FluidDexError(ErrorTypes.DexT1__MsgSenderNotLiquidity);
        if (dexVariables & 1 == 0) revert FluidDexError(ErrorTypes.DexT1__ReentrancyBitShouldBeOn);
        if (data_.length != 96) revert FluidDexError(ErrorTypes.DexT1__IncorrectDataLength);
        (uint amountToSend_, bool isCallback_, address from_) = abi.decode(data_, (uint, bool, address));
        if (amountToSend_ < amount_) revert FluidDexError(ErrorTypes.DexT1__AmountToSendLessThanAmount);
        if (isCallback_) {
            IDexCallback(from_).dexCallback(token_, amountToSend_);
        } else {
            SafeTransfer.safeTransferFrom(token_, from_, address(LIQUIDITY), amountToSend_);
        }
    }
    /// @dev the oracle assumes last set price of pool till the next swap happens.
    /// There's a possibility that during that time some interest is generated hence the last stored price is not the 100% correct price for the whole duration
    /// but the difference due to interest will be super low so this difference is ignored
    /// For example 2 swaps happened 10min (600 seconds) apart and 1 token has 10% higher interest than other.
    /// then that token will accrue about 10% * 600 / secondsInAYear = ~0.0002%
    /// @param secondsAgos_ array of seconds ago for which TWAP is needed. If user sends [10, 30, 60] then twaps_ will return [10-0, 30-10, 60-30]
    /// @return twaps_ twap price, lowest price (aka minima) & highest price (aka maxima) between secondsAgo checkpoints
    /// @return currentPrice_ price of pool after the most recent swap
    function oraclePrice(
        uint[] memory secondsAgos_
    ) external view returns (Oracle[] memory twaps_, uint currentPrice_) {
        OraclePriceMemory memory o_;
        uint dexVariables_ = dexVariables;
        if ((dexVariables_ >> 195) & 1 == 0) {
            revert FluidDexError(ErrorTypes.DexT1__OracleNotActive);
        }
        twaps_ = new Oracle[](secondsAgos_.length);
        uint totalTime_;
        uint time_;
        uint i;
        uint secondsAgo_ = secondsAgos_[0];
        currentPrice_ = (dexVariables_ >> 41) & X40;
        currentPrice_ = (currentPrice_ >> DEFAULT_EXPONENT_SIZE) << (currentPrice_ & DEFAULT_EXPONENT_MASK);
        uint price_ = currentPrice_;
        o_.lowestPrice1by0 = currentPrice_;
        o_.highestPrice1by0 = currentPrice_;
        uint twap1by0_;
        uint twap0by1_;
        uint j;
        o_.oracleSlot = (dexVariables_ >> 176) & X3;
        o_.oracleMap = (dexVariables_ >> 179) & X16;
        // if o_.oracleSlot == 7 then it'll enter the if statement in the below while loop
        o_.oracle = o_.oracleSlot < 7 ? _oracle[o_.oracleMap] : 0;
        uint slotData_;
        uint percentDiff_;
        if (((dexVariables_ >> 121) & X33) < block.timestamp) {
            // last swap didn't occured in this block.
            // hence last price is current price of pool & also the last price
            time_ = block.timestamp - ((dexVariables_ >> 121) & X33);
        } else {
            // last swap occured in this block, that means current price is active for 0 secs. Hence TWAP for it will be 0.
            ++j;
        }
        while (true) {
            if (j == 2) {
                if (++o_.oracleSlot == 8) {
                    o_.oracleSlot = 0;
                    if (o_.oracleMap == 0) {
                        o_.oracleMap = TOTAL_ORACLE_MAPPING;
                    }
                    o_.oracle = _oracle[--o_.oracleMap];
                }
                slotData_ = (o_.oracle >> (o_.oracleSlot * 32)) & X32;
                if (slotData_ > 0) {
                    time_ = slotData_ & X9;
                    if (time_ == 0) {
                        // time is in precision & sign bits
                        time_ = slotData_ >> 9;
                        // if o_.oracleSlot is 7 then precision & bits and stored in 1 less map
                        if (o_.oracleSlot == 7) {
                            o_.oracleSlot = 0;
                            if (o_.oracleMap == 0) {
                                o_.oracleMap = TOTAL_ORACLE_MAPPING;
                            }
                            o_.oracle = _oracle[--o_.oracleMap];
                            slotData_ = o_.oracle & X32;
                        } else {
                            ++o_.oracleSlot;
                            slotData_ = (o_.oracle >> (o_.oracleSlot * 32)) & X32;
                        }
                    }
                    percentDiff_ = slotData_ >> 10;
                    percentDiff_ = (ORACLE_LIMIT * percentDiff_) / X22;
                    if (((slotData_ >> 9) & 1 == 1)) {
                        // if positive then old price was lower than current hence subtracting
                        price_ = price_ - (price_ * percentDiff_) / ORACLE_PRECISION;
                    } else {
                        // if negative then old price was higher than current hence adding
                        price_ = price_ + (price_ * percentDiff_) / ORACLE_PRECISION;
                    }
                } else {
                    // oracle data does not exist. Probably due to pool recently got initialized and not have much swaps.
                    revert FluidDexError(ErrorTypes.DexT1__InsufficientOracleData);
                }
            } else if (j == 1) {
                // last & last to last price
                price_ = (dexVariables_ >> 1) & X40;
                price_ = (price_ >> DEFAULT_EXPONENT_SIZE) << (price_ & DEFAULT_EXPONENT_MASK);
                time_ = (dexVariables_ >> 154) & X22;
                ++j;
            } else if (j == 0) {
                ++j;
            }
            totalTime_ += time_;
            if (o_.lowestPrice1by0 > price_) o_.lowestPrice1by0 = price_;
            if (o_.highestPrice1by0 < price_) o_.highestPrice1by0 = price_;
            if (totalTime_ < secondsAgo_) {
                twap1by0_ += price_ * time_;
                twap0by1_ += (1e54 / price_) * time_;
            } else {
                time_ = time_ + secondsAgo_ - totalTime_;
                twap1by0_ += price_ * time_;
                twap0by1_ += (1e54 / price_) * time_;
                // also auto checks that secondsAgos_ should not be == 0
                twap1by0_ = twap1by0_ / secondsAgo_;
                twap0by1_ = twap0by1_ / secondsAgo_;
                twaps_[i] = Oracle(
                    twap1by0_,
                    o_.lowestPrice1by0,
                    o_.highestPrice1by0,
                    twap0by1_,
                    (1e54 / o_.highestPrice1by0),
                    (1e54 / o_.lowestPrice1by0)
                );
                // TWAP for next secondsAgo will start with price_
                o_.lowestPrice1by0 = price_;
                o_.highestPrice1by0 = price_;
                while (++i < secondsAgos_.length) {
                    // secondsAgo_ = [60, 15, 0]
                    time_ = totalTime_ - secondsAgo_;
                    // updating total time as new seconds ago started
                    totalTime_ = time_;
                    // also auto checks that secondsAgos_[i + 1] > secondsAgos_[i]
                    secondsAgo_ = secondsAgos_[i] - secondsAgos_[i - 1];
                    if (totalTime_ < secondsAgo_) {
                        twap1by0_ = price_ * time_;
                        twap0by1_ = (1e54 / price_) * time_;
                        // if time_ comes out as 0 here then lowestPrice & highestPrice should not be price_, it should be next price_ that we will calculate
                        if (time_ == 0) {
                            o_.lowestPrice1by0 = type(uint).max;
                            o_.highestPrice1by0 = 0;
                        }
                        break;
                    } else {
                        time_ = time_ + secondsAgo_ - totalTime_;
                        // twap1by0_ = price_ here
                        twap1by0_ = price_ * time_;
                        // twap0by1_ = (1e54 / price_) * time_;
                        twap0by1_ = (1e54 / price_) * time_;
                        twap1by0_ = twap1by0_ / secondsAgo_;
                        twap0by1_ = twap0by1_ / secondsAgo_;
                        twaps_[i] = Oracle(
                            twap1by0_,
                            o_.lowestPrice1by0,
                            o_.highestPrice1by0,
                            twap0by1_,
                            (1e54 / o_.highestPrice1by0),
                            (1e54 / o_.lowestPrice1by0)
                        );
                    }
                }
                if (i == secondsAgos_.length) return (twaps_, currentPrice_); // oracle fetch over
            }
        }
    }
    function getPricesAndExchangePrices() public {
        uint dexVariables_ = dexVariables;
        uint dexVariables2_ = dexVariables2;
        _check(dexVariables_, dexVariables2_);
        PricesAndExchangePrice memory pex_ = _getPricesAndExchangePrices(dexVariables, dexVariables2);
        revert FluidDexPricesAndExchangeRates(pex_);
    }
    /// @dev Internal fallback function to handle calls to non-existent functions
    /// @notice This function is called when a transaction is sent to the contract without matching any other function
    /// @notice It checks if the caller is authorized, enables re-entrancy protection, delegates the call to the admin implementation, and then disables re-entrancy protection
    /// @notice Only authorized callers (global or dex auth) can trigger this function
    /// @notice This function uses assembly to perform a delegatecall to the admin implementation to update configs related to DEX
    function _fallback() private {
        if (!(DEX_FACTORY.isGlobalAuth(msg.sender) || DEX_FACTORY.isDexAuth(address(this), msg.sender))) {
            revert FluidDexError(ErrorTypes.DexT1__NotAnAuth);
        }
        uint dexVariables_ = dexVariables;
        if (dexVariables_ & 1 == 1) revert FluidDexError(ErrorTypes.DexT1__AlreadyEntered);
        // enabling re-entrancy
        dexVariables = dexVariables_ | 1;
        // Delegate the current call to `ADMIN_IMPLEMENTATION`.
        _spell(ADMIN_IMPLEMENTATION, msg.data);
        // disabling re-entrancy
        // directly fetching from storage so updates from Admin module will get auto covered
        dexVariables = dexVariables & ~uint(1);
    }
    fallback() external payable {
        _fallback();
    }
    receive() external payable {
        if (msg.sig != 0x00000000) {
            _fallback();
        }
    }
    /// @notice returns all Vault constants
    function constantsView() external view returns (ConstantViews memory constantsView_) {
        constantsView_.dexId = DEX_ID;
        constantsView_.liquidity = address(LIQUIDITY);
        constantsView_.factory = address(DEX_FACTORY);
        constantsView_.token0 = TOKEN_0;
        constantsView_.token1 = TOKEN_1;
        constantsView_.implementations.shift = SHIFT_IMPLEMENTATION;
        constantsView_.implementations.admin = ADMIN_IMPLEMENTATION;
        constantsView_.implementations.colOperations = COL_OPERATIONS_IMPLEMENTATION;
        constantsView_.implementations.debtOperations = DEBT_OPERATIONS_IMPLEMENTATION;
        constantsView_.implementations.perfectOperationsAndSwapOut = PERFECT_OPERATIONS_AND_SWAP_OUT_IMPLEMENTATION;
        constantsView_.deployerContract = DEPLOYER_CONTRACT;
        constantsView_.supplyToken0Slot = SUPPLY_TOKEN_0_SLOT;
        constantsView_.borrowToken0Slot = BORROW_TOKEN_0_SLOT;
        constantsView_.supplyToken1Slot = SUPPLY_TOKEN_1_SLOT;
        constantsView_.borrowToken1Slot = BORROW_TOKEN_1_SLOT;
        constantsView_.exchangePriceToken0Slot = EXCHANGE_PRICE_TOKEN_0_SLOT;
        constantsView_.exchangePriceToken1Slot = EXCHANGE_PRICE_TOKEN_1_SLOT;
        constantsView_.oracleMapping = TOTAL_ORACLE_MAPPING;
    }
    /// @notice returns all Vault constants
    function constantsView2() external view returns (ConstantViews2 memory constantsView2_) {
        constantsView2_.token0NumeratorPrecision = TOKEN_0_NUMERATOR_PRECISION;
        constantsView2_.token0DenominatorPrecision = TOKEN_0_DENOMINATOR_PRECISION;
        constantsView2_.token1NumeratorPrecision = TOKEN_1_NUMERATOR_PRECISION;
        constantsView2_.token1DenominatorPrecision = TOKEN_1_DENOMINATOR_PRECISION;
    }
    /// @notice Calculates the real and imaginary reserves for collateral tokens
    /// @dev This function retrieves the supply of both tokens from the liquidity layer,
    ///      adjusts them based on exchange prices, and calculates imaginary reserves
    ///      based on the geometric mean and price range
    /// @param geometricMean_ The geometric mean of the token prices
    /// @param upperRange_ The upper price range
    /// @param lowerRange_ The lower price range
    /// @param token0SupplyExchangePrice_ The exchange price for token0 from liquidity layer
    /// @param token1SupplyExchangePrice_ The exchange price for token1 from liquidity layer
    /// @return c_ A struct containing the calculated real and imaginary reserves for both tokens:
    ///         - token0RealReserves: The real reserves of token0
    ///         - token1RealReserves: The real reserves of token1
    ///         - token0ImaginaryReserves: The imaginary reserves of token0
    ///         - token1ImaginaryReserves: The imaginary reserves of token1
    function getCollateralReserves(
        uint geometricMean_,
        uint upperRange_,
        uint lowerRange_,
        uint token0SupplyExchangePrice_,
        uint token1SupplyExchangePrice_
    ) public view returns (CollateralReserves memory c_) {
        return
            _getCollateralReserves(
                geometricMean_,
                upperRange_,
                lowerRange_,
                token0SupplyExchangePrice_,
                token1SupplyExchangePrice_
            );
    }
    /// @notice Calculates the debt reserves for both tokens
    /// @param geometricMean_ The geometric mean of the upper and lower price ranges
    /// @param upperRange_ The upper price range
    /// @param lowerRange_ The lower price range
    /// @param token0BorrowExchangePrice_ The exchange price of token0 from liquidity layer
    /// @param token1BorrowExchangePrice_ The exchange price of token1 from liquidity layer
    /// @return d_ The calculated debt reserves for both tokens, containing:
    ///         - token0Debt: The debt amount of token0
    ///         - token1Debt: The debt amount of token1
    ///         - token0RealReserves: The real reserves of token0 derived from token1 debt
    ///         - token1RealReserves: The real reserves of token1 derived from token0 debt
    ///         - token0ImaginaryReserves: The imaginary debt reserves of token0
    ///         - token1ImaginaryReserves: The imaginary debt reserves of token1
    function getDebtReserves(
        uint geometricMean_,
        uint upperRange_,
        uint lowerRange_,
        uint token0BorrowExchangePrice_,
        uint token1BorrowExchangePrice_
    ) public view returns (DebtReserves memory d_) {
        return
            _getDebtReserves(
                geometricMean_,
                upperRange_,
                lowerRange_,
                token0BorrowExchangePrice_,
                token1BorrowExchangePrice_
            );
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.21;
abstract contract Events {
    /// @notice Emitted on token swaps
    /// @param swap0to1 Indicates whether the swap is from token0 to token1 or vice-versa.
    /// @param amountIn The amount of tokens to be sent to the vault to swap.
    /// @param amountOut The amount of tokens user got from the swap.
    /// @param to Recepient of swapped tokens.
    event Swap(bool swap0to1, uint256 amountIn, uint256 amountOut, address to);
    /// @notice Emitted when liquidity is added with shares specified.
    /// @param shares Expected exact shares to be received.
    /// @param token0Amt Amount of token0 deposited.
    /// @param token0Amt Amount of token1 deposited.
    event LogDepositPerfectColLiquidity(uint shares, uint token0Amt, uint token1Amt);
    /// @notice Emitted when liquidity is withdrawn with shares specified.
    /// @param shares shares burned
    /// @param token0Amt Amount of token0 withdrawn.
    /// @param token1Amt Amount of token1 withdrawn.
    event LogWithdrawPerfectColLiquidity(uint shares, uint token0Amt, uint token1Amt);
    /// @notice Emitted when liquidity is borrowed with shares specified.
    /// @param shares shares minted
    /// @param token0Amt Amount of token0 borrowed.
    /// @param token1Amt Amount of token1 borrowed.
    event LogBorrowPerfectDebtLiquidity(uint shares, uint token0Amt, uint token1Amt);
    /// @notice Emitted when liquidity is paid back with shares specified.
    /// @param shares shares burned
    /// @param token0Amt Amount of token0 paid back.
    /// @param token1Amt Amount of token1 paid back.
    event LogPaybackPerfectDebtLiquidity(uint shares, uint token0Amt, uint token1Amt);
    /// @notice Emitted when liquidity is deposited with specified token0 & token1 amount
    /// @param amount0 Amount of token0 deposited.
    /// @param amount1 Amount of token1 deposited.
    /// @param shares Amount of shares minted.
    event LogDepositColLiquidity(uint amount0, uint amount1, uint shares);
    /// @notice Emitted when liquidity is withdrawn with specified token0 & token1 amount
    /// @param amount0 Amount of token0 withdrawn.
    /// @param amount1 Amount of token1 withdrawn.
    /// @param shares Amount of shares burned.
    event LogWithdrawColLiquidity(uint amount0, uint amount1, uint shares);
    /// @notice Emitted when liquidity is borrowed with specified token0 & token1 amount
    /// @param amount0 Amount of token0 borrowed.
    /// @param amount1 Amount of token1 borrowed.
    /// @param shares Amount of shares minted.
    event LogBorrowDebtLiquidity(uint amount0, uint amount1, uint shares);
    /// @notice Emitted when liquidity is paid back with specified token0 & token1 amount
    /// @param amount0 Amount of token0 paid back.
    /// @param amount1 Amount of token1 paid back.
    /// @param shares Amount of shares burned.
    event LogPaybackDebtLiquidity(uint amount0, uint amount1, uint shares);
    /// @notice Emitted when liquidity is withdrawn with shares specified into one token only.
    /// @param shares shares burned
    /// @param token0Amt Amount of token0 withdrawn.
    /// @param token1Amt Amount of token1 withdrawn.
    event LogWithdrawColInOneToken(uint shares, uint token0Amt, uint token1Amt);
    /// @notice Emitted when liquidity is paid back with shares specified from one token only.
    /// @param shares shares burned
    /// @param token0Amt Amount of token0 paid back.
    /// @param token1Amt Amount of token1 paid back.
    event LogPaybackDebtInOneToken(uint shares, uint token0Amt, uint token1Amt);
    /// @notice Emitted when internal arbitrage between 2 pools happen
    /// @param routing if positive then routing is amtIn of token0 in deposit & borrow else token0 withdraw & payback
    /// @param amtOut if routing is positive then token1 withdraw & payback amount else token1 deposit & borrow
    event LogArbitrage(int routing, uint amtOut);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.21;
import { FixedPointMathLib } from "solmate/src/utils/FixedPointMathLib.sol";
import { Variables } from "../../common/variables.sol";
import { ImmutableVariables } from "../immutableVariables.sol";
import { Events } from "../events.sol";
import { ErrorTypes } from "../../../errorTypes.sol";
import { IHook, ICenterPrice } from "../interfaces.sol";
import { LiquiditySlotsLink } from "../../../../../libraries/liquiditySlotsLink.sol";
import { LiquidityCalcs } from "../../../../../libraries/liquidityCalcs.sol";
import { DexSlotsLink } from "../../../../../libraries/dexSlotsLink.sol";
import { DexCalcs } from "../../../../../libraries/dexCalcs.sol";
import { BigMathMinified } from "../../../../../libraries/bigMathMinified.sol";
import { AddressCalcs } from "../../../../../libraries/addressCalcs.sol";
interface IShifting {
    /// @dev Calculates the new upper and lower range values during an active range shift
    /// @param upperRange_ The target upper range value
    /// @param lowerRange_ The target lower range value
    /// @param dexVariables2_ needed in case shift is ended and we need to update dexVariables2
    /// @return The updated upper range, lower range, and dexVariables2
    function _calcRangeShifting(
        uint upperRange_,
        uint lowerRange_,
        uint dexVariables2_
    ) external returns (uint, uint, uint);
    /// @dev Calculates the new threshold values during an active threshold shift
    /// @param upperThreshold_ The target upper threshold value
    /// @param lowerThreshold_ The target lower threshold value
    /// @param dexVariables2_ needed in case shift is ended and we need to update dexVariables2
    /// @return The updated upper threshold, lower threshold, and dexVariables2
    function _calcThresholdShifting(
        uint upperThreshold_,
        uint lowerThreshold_,
        uint dexVariables2_
    ) external returns (uint, uint, uint);
    /// @dev Calculates the new center price during an active center price shift
    /// @param dexVariables_ The current state of dex variables
    /// @param dexVariables2_ Additional dex variables
    /// @return The updated center price
    function _calcCenterPrice(
        uint dexVariables_,
        uint dexVariables2_
    ) external returns (uint);
}
abstract contract CoreHelpers is Variables, ImmutableVariables, Events {
    using BigMathMinified for uint256;
    /// @dev            do any arbitrary call
    /// @param target_  Address to which the call needs to be delegated
    /// @param data_    Data to execute at the delegated address
    function _spell(address target_, bytes memory data_) internal returns (bytes memory response_) {
        assembly {
            let succeeded := delegatecall(gas(), target_, add(data_, 0x20), mload(data_), 0, 0)
            let size := returndatasize()
            response_ := mload(0x40)
            mstore(0x40, add(response_, and(add(add(size, 0x20), 0x1f), not(0x1f))))
            mstore(response_, size)
            returndatacopy(add(response_, 0x20), 0, size)
            if iszero(succeeded) {
                // throw if delegatecall failed
                returndatacopy(0x00, 0x00, size)
                revert(0x00, size)
            }
        }
    }
    /// @dev Given an input amount of asset and pair reserves, returns the maximum output amount of the other asset
    /// @param amountIn_ The amount of input asset.
    /// @param iReserveIn_ Imaginary token reserve with input amount.
    /// @param iReserveOut_ Imaginary token reserve of output amount.
    function _getAmountOut(
        uint256 amountIn_,
        uint iReserveIn_,
        uint iReserveOut_
    ) internal pure returns (uint256 amountOut_) {
        unchecked {
            // Both numerator and denominator are scaled to 1e6 to factor in fee scaling.
            uint256 numerator_ = amountIn_ * iReserveOut_;
            uint256 denominator_ = iReserveIn_ + amountIn_;
            // Using the swap formula: (AmountIn * iReserveY) / (iReserveX + AmountIn)
            amountOut_ = numerator_ / denominator_;
        }
    }
    /// @dev Given an output amount of asset and pair reserves, returns the input amount of the other asset
    /// @param amountOut_ Desired output amount of the asset.
    /// @param iReserveIn_ Imaginary token reserve of input amount.
    /// @param iReserveOut_ Imaginary token reserve of output amount.
    function _getAmountIn(
        uint256 amountOut_,
        uint iReserveIn_,
        uint iReserveOut_
    ) internal pure returns (uint256 amountIn_) {
        // Both numerator and denominator are scaled to 1e6 to factor in fee scaling.
        uint256 numerator_ = amountOut_ * iReserveIn_;
        uint256 denominator_ = iReserveOut_ - amountOut_;
        // Using the swap formula: (AmountOut * iReserveX) / (iReserveY - AmountOut)
        amountIn_ = numerator_ / denominator_;
    }
    /// @param t total amount in
    /// @param x imaginary reserves of token out of collateral
    /// @param y imaginary reserves of token in of collateral
    /// @param x2 imaginary reserves of token out of debt
    /// @param y2 imaginary reserves of token in of debt
    /// @return a_ how much swap should go through collateral pool. Remaining will go from debt
    /// note if a < 0 then entire trade route through debt pool and debt pool arbitrage with col pool
    /// note if a > t then entire trade route through col pool and col pool arbitrage with debt pool
    /// note if a > 0 & a < t then swap will route through both pools
    function _swapRoutingIn(uint t, uint x, uint y, uint x2, uint y2) internal pure returns (int a_) {
        // Main equations:
        // 1. out = x * a / (y + a)
        // 2. out2 = x2 * (t - a) / (y2 + (t - a))
        // final price should be same
        // 3. (y + a) / (x - out) = (y2 + (t - a)) / (x2 - out2)
        // derivation: https://chatgpt.com/share/dce6f381-ee5f-4d5f-b6ea-5996e84d5b57
        // adding 1e18 precision
        uint xyRoot_ = FixedPointMathLib.sqrt(x * y * 1e18);
        uint x2y2Root_ = FixedPointMathLib.sqrt(x2 * y2 * 1e18);
        a_ = (int(y2 * xyRoot_ + t * xyRoot_) - int(y * x2y2Root_)) / int(xyRoot_ + x2y2Root_);
    }
    /// @param t total amount out
    /// @param x imaginary reserves of token in of collateral
    /// @param y imaginary reserves of token out of collateral
    /// @param x2 imaginary reserves of token in of debt
    /// @param y2 imaginary reserves of token out of debt
    /// @return a_ how much swap should go through collateral pool. Remaining will go from debt
    /// note if a < 0 then entire trade route through debt pool and debt pool arbitrage with col pool
    /// note if a > t then entire trade route through col pool and col pool arbitrage with debt pool
    /// note if a > 0 & a < t then swap will route through both pools
    function _swapRoutingOut(uint t, uint x, uint y, uint x2, uint y2) internal pure returns (int a_) {
        // Main equations:
        // 1. in = (x * a) / (y - a)
        // 2. in2 = (x2 * (t - a)) / (y2 - (t - a))
        // final price should be same
        // 3. (y - a) / (x + in) = (y2 - (t - a)) / (x2 + in2)
        // derivation: https://chatgpt.com/share/6585bc28-841f-49ec-aea2-1e5c5b7f4fa9
        // adding 1e18 precision
        uint xyRoot_ = FixedPointMathLib.sqrt(x * y * 1e18);
        uint x2y2Root_ = FixedPointMathLib.sqrt(x2 * y2 * 1e18);
        // 1e18 precision gets cancelled out in division
        a_ = (int(t * xyRoot_ + y * x2y2Root_) - int(y2 * xyRoot_)) / int(xyRoot_ + x2y2Root_);
    }
    function _utilizationVerify(uint utilizationLimit_, bytes32 exchangePriceSlot_) internal view {
        if (utilizationLimit_ < THREE_DECIMALS) {
            utilizationLimit_ = utilizationLimit_ * 10;
            // extracting utilization of token from liquidity layer
            uint liquidityLayerUtilization_ = LIQUIDITY.readFromStorage(exchangePriceSlot_);
            liquidityLayerUtilization_ =
                (liquidityLayerUtilization_ >> LiquiditySlotsLink.BITS_EXCHANGE_PRICES_UTILIZATION) &
                X14;
            // Note: this can go slightly above the utilization limit if no update is written to storage at liquidity layer
            // if swap was not big enough to go far enough above or any other storage update threshold write cause there
            // so just to keep in mind when configuring the actual limit reachable can be utilizationLimit_ + storageUpdateThreshold at Liquidity
            if (liquidityLayerUtilization_ > utilizationLimit_)
                revert FluidDexError(ErrorTypes.DexT1__LiquidityLayerTokenUtilizationCapReached);
        }
    }
    function _check(uint dexVariables_, uint dexVariables2_) internal {
        if (dexVariables_ & 1 == 1) revert FluidDexError(ErrorTypes.DexT1__AlreadyEntered);
        if (dexVariables2_ & 3 == 0) revert FluidDexError(ErrorTypes.DexT1__PoolNotInitialized);
        // enabling re-entrancy
        dexVariables = dexVariables_ | 1;
    }
    /// @dev if token0 reserves are too low w.r.t token1 then revert, this is to avoid edge case scenario and making sure that precision on calculations should be high enough
    function _verifyToken0Reserves(
        uint token0Reserves_,
        uint token1Reserves_,
        uint centerPrice_,
        uint minLiquidity_
    ) internal pure {
        if (((token0Reserves_) < ((token1Reserves_ * 1e27) / (centerPrice_ * minLiquidity_)))) {
            revert FluidDexError(ErrorTypes.DexT1__TokenReservesTooLow);
        }
    }
    /// @dev if token1 reserves are too low w.r.t token0 then revert, this is to avoid edge case scenario and making sure that precision on calculations should be high enough
    function _verifyToken1Reserves(
        uint token0Reserves_,
        uint token1Reserves_,
        uint centerPrice_,
        uint minLiquidity_
    ) internal pure {
        if (((token1Reserves_) < ((token0Reserves_ * centerPrice_) / (1e27 * minLiquidity_)))) {
            revert FluidDexError(ErrorTypes.DexT1__TokenReservesTooLow);
        }
    }
    function _verifySwapAndNonPerfectActions(uint amountAdjusted_, uint amount_) internal pure {
        // after shifting amount should not become 0
        // limiting to six decimals which means in case of USDC, USDT it's 1 wei, for WBTC 100 wei, for ETH 1000 gwei
        if (amountAdjusted_ < SIX_DECIMALS || amountAdjusted_ > X96 || amount_ < TWO_DECIMALS || amount_ > X128)
            revert FluidDexError(ErrorTypes.DexT1__LimitingAmountsSwapAndNonPerfectActions);
    }
    /// @dev Calculates the new upper and lower range values during an active range shift
    /// @param upperRange_ The target upper range value
    /// @param lowerRange_ The target lower range value
    /// @param dexVariables2_ needed in case shift is ended and we need to update dexVariables2
    /// @return The updated upper range, lower range, and dexVariables2
    /// @notice This function handles the gradual shifting of range values over time
    /// @notice If the shift is complete, it updates the state and clears the shift data
    function _calcRangeShifting(
        uint upperRange_,
        uint lowerRange_,
        uint dexVariables2_
    ) internal returns (uint, uint, uint) {
        return
            abi.decode(
                _spell(
                    SHIFT_IMPLEMENTATION,
                    abi.encodeWithSelector(
                        IShifting._calcRangeShifting.selector,
                        upperRange_,
                        lowerRange_,
                        dexVariables2_
                    )
                ),
                (uint, uint, uint)
            );
    }
    /// @dev Calculates the new upper and lower threshold values during an active threshold shift
    /// @param upperThreshold_ The target upper threshold value
    /// @param lowerThreshold_ The target lower threshold value
    /// @param thresholdTime_ The time passed since shifting started
    /// @return The updated upper threshold, lower threshold, and threshold time
    /// @notice This function handles the gradual shifting of threshold values over time
    /// @notice If the shift is complete, it updates the state and clears the shift data
    function _calcThresholdShifting(
        uint upperThreshold_,
        uint lowerThreshold_,
        uint thresholdTime_
    ) internal returns (uint, uint, uint) {
        return
            abi.decode(
                _spell(
                    SHIFT_IMPLEMENTATION,
                    abi.encodeWithSelector(
                        IShifting._calcThresholdShifting.selector,
                        upperThreshold_,
                        lowerThreshold_,
                        thresholdTime_
                    )
                ),
                (uint, uint, uint)
            );
    }
    /// @dev Calculates the new center price during an active price shift
    /// @param dexVariables_ The current state of dex variables
    /// @param dexVariables2_ Additional dex variables
    /// @return newCenterPrice_ The updated center price
    /// @notice This function gradually shifts the center price towards a new target price over time
    /// @notice It uses an external price source (via ICenterPrice) to determine the target price
    /// @notice The shift continues until the current price reaches the target, or the shift duration ends
    /// @notice Once the shift is complete, it updates the state and clears the shift data
    /// @notice The shift rate is dynamic and depends on:
    /// @notice - Time remaining in the shift duration
    /// @notice - The new center price (fetched externally, which may change)
    /// @notice - The current (old) center price
    /// @notice This results in a fuzzy shifting mechanism where the rate can change as these parameters evolve
    /// @notice The externally fetched new center price is expected to not differ significantly from the last externally fetched center price
    function _calcCenterPrice(uint dexVariables_, uint dexVariables2_) internal returns (uint newCenterPrice_) {
        return
            abi.decode(
                _spell(
                    SHIFT_IMPLEMENTATION,
                    abi.encodeWithSelector(IShifting._calcCenterPrice.selector, dexVariables_, dexVariables2_)
                ),
                (uint)
            );
    }
    /// @notice Calculates and returns the current prices and exchange prices for the pool
    /// @param dexVariables_ The first set of DEX variables containing various pool parameters
    /// @param dexVariables2_ The second set of DEX variables containing additional pool parameters
    /// @return pex_ A struct containing the calculated prices and exchange prices:
    ///         - pex_.lastStoredPrice: The last stored price in 1e27 decimals
    ///         - pex_.centerPrice: The calculated or fetched center price in 1e27 decimals
    ///         - pex_.upperRange: The upper range price limit in 1e27 decimals
    ///         - pex_.lowerRange: The lower range price limit in 1e27 decimals
    ///         - pex_.geometricMean: The geometric mean of upper range & lower range in 1e27 decimals
    ///         - pex_.supplyToken0ExchangePrice: The current exchange price for supplying token0
    ///         - pex_.borrowToken0ExchangePrice: The current exchange price for borrowing token0
    ///         - pex_.supplyToken1ExchangePrice: The current exchange price for supplying token1
    ///         - pex_.borrowToken1ExchangePrice: The current exchange price for borrowing token1
    /// @dev This function performs the following operations:
    ///      1. Determines the center price (either from storage, external source, or calculated)
    ///      2. Retrieves the last stored price from dexVariables_
    ///      3. Calculates the upper and lower range prices based on the center price and range percentages
    ///      4. Checks if rebalancing is needed based on threshold settings
    ///      5. Adjusts prices if necessary based on the time elapsed and threshold conditions
    ///      6. Update the dexVariables2_ if changes were made
    ///      7. Returns the calculated prices and exchange prices in the PricesAndExchangePrice struct
    function _getPricesAndExchangePrices(
        uint dexVariables_,
        uint dexVariables2_
    ) internal returns (PricesAndExchangePrice memory pex_) {
        uint centerPrice_;
        if (((dexVariables2_ >> 248) & 1) == 0) {
            // centerPrice_ => center price hook
            centerPrice_ = (dexVariables2_ >> 112) & X30;
            if (centerPrice_ == 0) {
                centerPrice_ = (dexVariables_ >> 81) & X40;
                centerPrice_ = (centerPrice_ >> DEFAULT_EXPONENT_SIZE) << (centerPrice_ & DEFAULT_EXPONENT_MASK);
            } else {
                // center price should be fetched from external source. For exmaple, in case of wstETH <> ETH pool,
                // we would want the center price to be pegged to wstETH exchange rate into ETH
                centerPrice_ = ICenterPrice(AddressCalcs.addressCalc(DEPLOYER_CONTRACT, centerPrice_)).centerPrice();
            }
        } else {
            // an active centerPrice_ shift is going on
            centerPrice_ = _calcCenterPrice(dexVariables_, dexVariables2_);
        }
        uint lastStoredPrice_ = (dexVariables_ >> 41) & X40;
        lastStoredPrice_ = (lastStoredPrice_ >> DEFAULT_EXPONENT_SIZE) << (lastStoredPrice_ & DEFAULT_EXPONENT_MASK);
        uint upperRange_ = ((dexVariables2_ >> 27) & X20);
        uint lowerRange_ = ((dexVariables2_ >> 47) & X20);
        if (((dexVariables2_ >> 26) & 1) == 1) {
            // an active range shift is going on
            (upperRange_, lowerRange_, dexVariables2_) = _calcRangeShifting(upperRange_, lowerRange_, dexVariables2_);
        }
        unchecked {
            // adding into unchecked because upperRange_ & lowerRange_ can only be > 0 & < SIX_DECIMALS
            // 1% = 1e4, 100% = 1e6
            upperRange_ = (centerPrice_ * SIX_DECIMALS) / (SIX_DECIMALS - upperRange_);
            // 1% = 1e4, 100% = 1e6
            lowerRange_ = (centerPrice_ * (SIX_DECIMALS - lowerRange_)) / SIX_DECIMALS;
        }
        bool changed_;
        {
            // goal will be to keep threshold percents 0 if center price is fetched from external source
            // checking if threshold are set non 0 then only rebalancing is on
            if (((dexVariables2_ >> 68) & X20) > 0) {
                uint upperThreshold_ = (dexVariables2_ >> 68) & X10;
                uint lowerThreshold_ = (dexVariables2_ >> 78) & X10;
                uint shiftingTime_ = (dexVariables2_ >> 88) & X24;
                if (((dexVariables2_ >> 67) & 1) == 1) {
                    // if active shift is going on for threshold then calculate threshold real time
                    (upperThreshold_, lowerThreshold_, shiftingTime_) = _calcThresholdShifting(
                        upperThreshold_,
                        lowerThreshold_,
                        shiftingTime_
                    );
                }
                unchecked {
                    if (
                        lastStoredPrice_ >
                        (centerPrice_ +
                            ((upperRange_ - centerPrice_) * (THREE_DECIMALS - upperThreshold_)) /
                            THREE_DECIMALS)
                    ) {
                        uint timeElapsed_ = block.timestamp - ((dexVariables_ >> 121) & X33);
                        // price shifting towards upper range
                        if (timeElapsed_ < shiftingTime_) {
                            centerPrice_ = centerPrice_ + ((upperRange_ - centerPrice_) * timeElapsed_) / shiftingTime_;
                        } else {
                            // 100% price shifted
                            centerPrice_ = upperRange_;
                        }
                        changed_ = true;
                    } else if (
                        lastStoredPrice_ <
                        (centerPrice_ -
                            ((centerPrice_ - lowerRange_) * (THREE_DECIMALS - lowerThreshold_)) /
                            THREE_DECIMALS)
                    ) {
                        uint timeElapsed_ = block.timestamp - ((dexVariables_ >> 121) & X33);
                        // price shifting towards lower range
                        if (timeElapsed_ < shiftingTime_) {
                            centerPrice_ = centerPrice_ - ((centerPrice_ - lowerRange_) * timeElapsed_) / shiftingTime_;
                        } else {
                            // 100% price shifted
                            centerPrice_ = lowerRange_;
                        }
                        changed_ = true;
                    }
                }
            }
        }
        // temp_ => max center price
        uint temp_ = (dexVariables2_ >> 172) & X28;
        temp_ = (temp_ >> DEFAULT_EXPONENT_SIZE) << (temp_ & DEFAULT_EXPONENT_MASK);
        if (centerPrice_ > temp_) {
            // if center price is greater than max center price
            centerPrice_ = temp_;
            changed_ = true;
        } else {
            // check if center price is less than min center price
            // temp_ => min center price
            temp_ = (dexVariables2_ >> 200) & X28;
            temp_ = (temp_ >> DEFAULT_EXPONENT_SIZE) << (temp_ & DEFAULT_EXPONENT_MASK);
            if (centerPrice_ < temp_) {
                centerPrice_ = temp_;
                changed_ = true;
            }
        }
        // if centerPrice_ is changed then calculating upper and lower range again
        if (changed_) {
            upperRange_ = ((dexVariables2_ >> 27) & X20);
            lowerRange_ = ((dexVariables2_ >> 47) & X20);
            if (((dexVariables2_ >> 26) & 1) == 1) {
                (upperRange_, lowerRange_, dexVariables2_) = _calcRangeShifting(
                    upperRange_,
                    lowerRange_,
                    dexVariables2_
                );
            }
            unchecked {
                // adding into unchecked because upperRange_ & lowerRange_ can only be > 0 & < SIX_DECIMALS
                // 1% = 1e4, 100% = 1e6
                upperRange_ = (centerPrice_ * SIX_DECIMALS) / (SIX_DECIMALS - upperRange_);
                // 1% = 1e4, 100% = 1e6
                lowerRange_ = (centerPrice_ * (SIX_DECIMALS - lowerRange_)) / SIX_DECIMALS;
            }
        }
        pex_.lastStoredPrice = lastStoredPrice_;
        pex_.centerPrice = centerPrice_;
        pex_.upperRange = upperRange_;
        pex_.lowerRange = lowerRange_;
        unchecked {
            if (upperRange_ < 1e38) {
                // 1e38 * 1e38 = 1e76 which is less than max uint limit
                pex_.geometricMean = FixedPointMathLib.sqrt(upperRange_ * lowerRange_);
            } else {
                // upperRange_ price is pretty large hence lowerRange_ will also be pretty large
                pex_.geometricMean = FixedPointMathLib.sqrt((upperRange_ / 1e18) * (lowerRange_ / 1e18)) * 1e18;
            }
        }
        // Exchange price will remain same as Liquidity Layer
        (pex_.supplyToken0ExchangePrice, pex_.borrowToken0ExchangePrice) = LiquidityCalcs.calcExchangePrices(
            LIQUIDITY.readFromStorage(EXCHANGE_PRICE_TOKEN_0_SLOT)
        );
        (pex_.supplyToken1ExchangePrice, pex_.borrowToken1ExchangePrice) = LiquidityCalcs.calcExchangePrices(
            LIQUIDITY.readFromStorage(EXCHANGE_PRICE_TOKEN_1_SLOT)
        );
    }
    /// @dev getting reserves outside range.
    /// @param gp_ is geometric mean pricing of upper percent & lower percent
    /// @param pa_ price of upper range or lower range
    /// @param rx_ real reserves of token0 or token1
    /// @param ry_ whatever is rx_ the other will be ry_
    function _calculateReservesOutsideRange(
        uint gp_,
        uint pa_,
        uint rx_,
        uint ry_
    ) internal pure returns (uint xa_, uint yb_) {
        // equations we have:
        // 1. x*y = k
        // 2. xa*ya = k
        // 3. xb*yb = k
        // 4. Pa = ya / xa = upperRange_ (known)
        // 5. Pb = yb / xb = lowerRange_ (known)
        // 6. x - xa = rx = real reserve of x (known)
        // 7. y - yb = ry = real reserve of y (known)
        // With solving we get:
        // ((Pa*Pb)^(1/2) - Pa)*xa^2 + (rx * (Pa*Pb)^(1/2) + ry)*xa + rx*ry = 0
        // yb = yb = xa * (Pa * Pb)^(1/2)
        // xa = (GP⋅rx + ry + (-rx⋅ry⋅4⋅(GP - Pa) + (GP⋅rx + ry)^2)^0.5) / (2Pa - 2GP)
        // multiply entire equation by 1e27 to remove the price decimals precision of 1e27
        // xa = (GP⋅rx + ry⋅1e27 + (rx⋅ry⋅4⋅(Pa - GP)⋅1e27 + (GP⋅rx + ry⋅1e27)^2)^0.5) / 2*(Pa - GP)
        // dividing the equation with 2*(Pa - GP). Pa is always > GP so answer will be positive.
        // xa = (((GP⋅rx + ry⋅1e27) / 2*(Pa - GP)) + (((rx⋅ry⋅4⋅(Pa - GP)⋅1e27) / 4*(Pa - GP)^2) + ((GP⋅rx + ry⋅1e27) / 2*(Pa - GP))^2)^0.5)
        // xa = (((GP⋅rx + ry⋅1e27) / 2*(Pa - GP)) + (((rx⋅ry⋅1e27) / (Pa - GP)) + ((GP⋅rx + ry⋅1e27) / 2*(Pa - GP))^2)^0.5)
        // dividing in 3 parts for simplification:
        // part1 = (Pa - GP)
        // part2 = (GP⋅rx + ry⋅1e27) / (2*part1)
        // part3 = rx⋅ry
        // note: part1 will almost always be < 1e28 but in case it goes above 1e27 then it's extremely unlikely it'll go above > 1e29
        uint p1_ = pa_ - gp_;
        uint p2_ = ((gp_ * rx_) + (ry_ * 1e27)) / (2 * p1_);
        uint p3_ = rx_ * ry_;
        // to avoid overflowing
        p3_ = (p3_ < 1e50) ? ((p3_ * 1e27) / p1_) : (p3_ / p1_) * 1e27;
        // xa = part2 + (part3 + (part2 * part2))^(1/2)
        // yb = xa_ * gp_
        xa_ = p2_ + FixedPointMathLib.sqrt((p3_ + (p2_ * p2_)));
        yb_ = (xa_ * gp_) / 1e27;
    }
    /// @dev Retrieves collateral amount from liquidity layer for a given token
    /// @param supplyTokenSlot_ The storage slot for the supply token data
    /// @param tokenExchangePrice_ The exchange price of the token
    /// @param isToken0_ Boolean indicating if the token is token0 (true) or token1 (false)
    /// @return tokenSupply_ The calculated liquidity collateral amount
    function _getLiquidityCollateral(
        bytes32 supplyTokenSlot_,
        uint tokenExchangePrice_,
        bool isToken0_
    ) internal view returns (uint tokenSupply_) {
        uint tokenSupplyData_ = LIQUIDITY.readFromStorage(supplyTokenSlot_);
        tokenSupply_ = (tokenSupplyData_ >> LiquiditySlotsLink.BITS_USER_SUPPLY_AMOUNT) & X64;
        tokenSupply_ = (tokenSupply_ >> DEFAULT_EXPONENT_SIZE) << (tokenSupply_ & DEFAULT_EXPONENT_MASK);
        if (tokenSupplyData_ & 1 == 1) {
            // supply with interest is on
            unchecked {
                tokenSupply_ = (tokenSupply_ * tokenExchangePrice_) / LiquidityCalcs.EXCHANGE_PRICES_PRECISION;
            }
        }
        unchecked {
            tokenSupply_ = isToken0_
                ? ((tokenSupply_ * TOKEN_0_NUMERATOR_PRECISION) / TOKEN_0_DENOMINATOR_PRECISION)
                : ((tokenSupply_ * TOKEN_1_NUMERATOR_PRECISION) / TOKEN_1_DENOMINATOR_PRECISION);
        }
    }
    /// @notice Calculates the real and imaginary reserves for collateral tokens
    /// @dev This function retrieves the supply of both tokens from the liquidity layer,
    ///      adjusts them based on exchange prices, and calculates imaginary reserves
    ///      based on the geometric mean and price range
    /// @param geometricMean_ The geometric mean of the token prices
    /// @param upperRange_ The upper price range
    /// @param lowerRange_ The lower price range
    /// @param token0SupplyExchangePrice_ The exchange price for token0 from liquidity layer
    /// @param token1SupplyExchangePrice_ The exchange price for token1 from liquidity layer
    /// @return c_ A struct containing the calculated real and imaginary reserves for both tokens:
    ///         - token0RealReserves: The real reserves of token0
    ///         - token1RealReserves: The real reserves of token1
    ///         - token0ImaginaryReserves: The imaginary reserves of token0
    ///         - token1ImaginaryReserves: The imaginary reserves of token1
    function _getCollateralReserves(
        uint geometricMean_,
        uint upperRange_,
        uint lowerRange_,
        uint token0SupplyExchangePrice_,
        uint token1SupplyExchangePrice_
    ) internal view returns (CollateralReserves memory c_) {
        uint token0Supply_ = _getLiquidityCollateral(SUPPLY_TOKEN_0_SLOT, token0SupplyExchangePrice_, true);
        uint token1Supply_ = _getLiquidityCollateral(SUPPLY_TOKEN_1_SLOT, token1SupplyExchangePrice_, false);
        if (geometricMean_ < 1e27) {
            (c_.token0ImaginaryReserves, c_.token1ImaginaryReserves) = _calculateReservesOutsideRange(
                geometricMean_,
                upperRange_,
                token0Supply_,
                token1Supply_
            );
        } else {
            // inversing, something like `xy = k` so for calculation we are making everything related to x into y & y into x
            // 1 / geometricMean for new geometricMean
            // 1 / lowerRange will become upper range
            // 1 / upperRange will become lower range
            (c_.token1ImaginaryReserves, c_.token0ImaginaryReserves) = _calculateReservesOutsideRange(
                (1e54 / geometricMean_),
                (1e54 / lowerRange_),
                token1Supply_,
                token0Supply_
            );
        }
        c_.token0RealReserves = token0Supply_;
        c_.token1RealReserves = token1Supply_;
        unchecked {
            c_.token0ImaginaryReserves += token0Supply_;
            c_.token1ImaginaryReserves += token1Supply_;
        }
    }
    /// @notice Calculates the real and imaginary debt reserves for both tokens
    /// @dev This function uses a quadratic equation to determine the debt reserves
    ///      based on the geometric mean price and the current debt amounts
    /// @param gp_ The geometric mean price of upper range & lower range
    /// @param pb_ The price of lower range
    /// @param dx_ The debt amount of one token
    /// @param dy_ The debt amount of the other token
    /// @return rx_ The real debt reserve of the first token
    /// @return ry_ The real debt reserve of the second token
    /// @return irx_ The imaginary debt reserve of the first token
    /// @return iry_ The imaginary debt reserve of the second token
    function _calculateDebtReserves(
        uint gp_,
        uint pb_,
        uint dx_,
        uint dy_
    ) internal pure returns (uint rx_, uint ry_, uint irx_, uint iry_) {
        // Assigning letter to knowns:
        // c = debtA
        // d = debtB
        // e = upperPrice
        // f = lowerPrice
        // g = upperPrice^1/2
        // h = lowerPrice^1/2
        // c = 1
        // d = 2000
        // e = 2222.222222
        // f = 1800
        // g = 2222.222222^1/2
        // h = 1800^1/2
        // Assigning letter to unknowns:
        // w = realDebtReserveA
        // x = realDebtReserveB
        // y = imaginaryDebtReserveA
        // z = imaginaryDebtReserveB
        // k = k
        // below quadratic will give answer of realDebtReserveB
        // A, B, C of quadratic equation:
        // A = h
        // B = dh - cfg
        // C = -cfdh
        // A = lowerPrice^1/2
        // B = debtB⋅lowerPrice^1/2 - debtA⋅lowerPrice⋅upperPrice^1/2
        // C = -(debtA⋅lowerPrice⋅debtB⋅lowerPrice^1/2)
        // x = (cfg − dh + (4cdf(h^2)+(cfg−dh)^2))^(1/2)) / 2h
        // simplifying dividing by h, note h = f^1/2
        // x = ((c⋅g⋅(f^1/2) − d) / 2 + ((4⋅c⋅d⋅f⋅f) / (4h^2) + ((c⋅f⋅g) / 2h − (d⋅h) / 2h)^2))^(1/2))
        // x = ((c⋅g⋅(f^1/2) − d) / 2 + ((c⋅d⋅f) + ((c⋅g⋅(f^1/2) − d) / 2)^2))^(1/2))
        // dividing in 3 parts for simplification:
        // part1 = (c⋅g⋅(f^1/2) − d) / 2
        // part2 = (c⋅d⋅f)
        // x = (part1 + (part2 + part1^2)^(1/2))
        // note: part1 will almost always be < 1e27 but in case it goes above 1e27 then it's extremely unlikely it'll go above > 1e28
        // part1 = ((debtA * upperPrice^1/2 * lowerPrice^1/2) - debtB) / 2
        // note: upperPrice^1/2 * lowerPrice^1/2 = geometric mean
        // part1 = ((debtA * geometricMean) - debtB) / 2
        // part2 = debtA * debtB * lowerPrice
        // converting decimals properly as price is in 1e27 decimals
        // part1 = ((debtA * geometricMean) - (debtB * 1e27)) / (2 * 1e27)
        // part2 = (debtA * debtB * lowerPrice) / 1e27
        // final x equals:
        // x = (part1 + (part2 + part1^2)^(1/2))
        int p1_ = (int(dx_ * gp_) - int(dy_ * 1e27)) / (2 * 1e27);
        uint p2_ = (dx_ * dy_);
        p2_ = p2_ < 1e50 ? (p2_ * pb_) / 1e27 : (p2_ / 1e27) * pb_;
        ry_ = uint(p1_ + int(FixedPointMathLib.sqrt((p2_ + uint(p1_ * p1_)))));
        // finding z:
        // x^2 - zx + cfz = 0
        // z*(x - cf) = x^2
        // z = x^2 / (x - cf)
        // z = x^2 / (x - debtA * lowerPrice)
        // converting decimals properly as price is in 1e27 decimals
        // z = (x^2 * 1e27) / ((x * 1e27) - (debtA * lowerPrice))
        iry_ = ((ry_ * 1e27) - (dx_ * pb_));
        if (iry_ < SIX_DECIMALS) {
            // almost impossible situation to ever get here
            revert FluidDexError(ErrorTypes.DexT1__DebtReservesTooLow);
        }
        if (ry_ < 1e25) {
            iry_ = (ry_ * ry_ * 1e27) / iry_;
        } else {
            // note: it can never result in negative as final result will always be in positive
            iry_ = (ry_ * ry_) / (iry_ / 1e27);
        }
        // finding y
        // x = z * c / (y + c)
        // y + c = z * c / x
        // y = (z * c / x) - c
        // y = (z * debtA / x) - debtA
        irx_ = ((iry_ * dx_) / ry_) - dx_;
        // finding w
        // w = y * d / (z + d)
        // w = (y * debtB) / (z + debtB)
        rx_ = (irx_ * dy_) / (iry_ + dy_);
    }
    /// @notice Calculates the debt amount for a given token from liquidity layer
    /// @param borrowTokenSlot_ The storage slot for the token's borrow data
    /// @param tokenExchangePrice_ The current exchange price of the token
    /// @param isToken0_ Boolean indicating if this is for token0 (true) or token1 (false)
    /// @return tokenDebt_ The calculated debt amount for the token
    function _getLiquidityDebt(
        bytes32 borrowTokenSlot_,
        uint tokenExchangePrice_,
        bool isToken0_
    ) internal view returns (uint tokenDebt_) {
        uint tokenBorrowData_ = LIQUIDITY.readFromStorage(borrowTokenSlot_);
        tokenDebt_ = (tokenBorrowData_ >> LiquiditySlotsLink.BITS_USER_BORROW_AMOUNT) & X64;
        tokenDebt_ = (tokenDebt_ >> 8) << (tokenDebt_ & X8);
        if (tokenBorrowData_ & 1 == 1) {
            // borrow with interest is on
            unchecked {
                tokenDebt_ = (tokenDebt_ * tokenExchangePrice_) / LiquidityCalcs.EXCHANGE_PRICES_PRECISION;
            }
        }
        unchecked {
            tokenDebt_ = isToken0_
                ? ((tokenDebt_ * TOKEN_0_NUMERATOR_PRECISION) / TOKEN_0_DENOMINATOR_PRECISION)
                : ((tokenDebt_ * TOKEN_1_NUMERATOR_PRECISION) / TOKEN_1_DENOMINATOR_PRECISION);
        }
    }
    /// @notice Calculates the debt reserves for both tokens
    /// @param geometricMean_ The geometric mean of the upper and lower price ranges
    /// @param upperRange_ The upper price range
    /// @param lowerRange_ The lower price range
    /// @param token0BorrowExchangePrice_ The exchange price of token0 from liquidity layer
    /// @param token1BorrowExchangePrice_ The exchange price of token1 from liquidity layer
    /// @return d_ The calculated debt reserves for both tokens, containing:
    ///         - token0Debt: The debt amount of token0
    ///         - token1Debt: The debt amount of token1
    ///         - token0RealReserves: The real reserves of token0 derived from token1 debt
    ///         - token1RealReserves: The real reserves of token1 derived from token0 debt
    ///         - token0ImaginaryReserves: The imaginary debt reserves of token0
    ///         - token1ImaginaryReserves: The imaginary debt reserves of token1
    function _getDebtReserves(
        uint geometricMean_,
        uint upperRange_,
        uint lowerRange_,
        uint token0BorrowExchangePrice_,
        uint token1BorrowExchangePrice_
    ) internal view returns (DebtReserves memory d_) {
        uint token0Debt_ = _getLiquidityDebt(BORROW_TOKEN_0_SLOT, token0BorrowExchangePrice_, true);
        uint token1Debt_ = _getLiquidityDebt(BORROW_TOKEN_1_SLOT, token1BorrowExchangePrice_, false);
        d_.token0Debt = token0Debt_;
        d_.token1Debt = token1Debt_;
        if (geometricMean_ < 1e27) {
            (
                d_.token0RealReserves,
                d_.token1RealReserves,
                d_.token0ImaginaryReserves,
                d_.token1ImaginaryReserves
            ) = _calculateDebtReserves(geometricMean_, lowerRange_, token0Debt_, token1Debt_);
        } else {
            // inversing, something like `xy = k` so for calculation we are making everything related to x into y & y into x
            // 1 / geometricMean for new geometricMean
            // 1 / lowerRange will become upper range
            // 1 / upperRange will become lower range
            (
                d_.token1RealReserves,
                d_.token0RealReserves,
                d_.token1ImaginaryReserves,
                d_.token0ImaginaryReserves
            ) = _calculateDebtReserves((1e54 / geometricMean_), (1e54 / upperRange_), token1Debt_, token0Debt_);
        }
    }
    function _priceDiffCheck(uint oldPrice_, uint newPrice_) internal pure returns (int priceDiff_) {
        // check newPrice_ & oldPrice_ difference should not be more than 5%
        // old price w.r.t new price
        priceDiff_ = int(ORACLE_PRECISION) - int((oldPrice_ * ORACLE_PRECISION) / newPrice_);
        unchecked {
            if ((priceDiff_ > int(ORACLE_LIMIT)) || (priceDiff_ < -int(ORACLE_LIMIT))) {
                // if oracle price difference is more than 5% then revert
                // in 1 swap price should only change by <= 5%
                // if a total fall by let's say 8% then in current block price can only fall by 5% and
                // in next block it'll fall the remaining 3%
                revert FluidDexError(ErrorTypes.DexT1__OracleUpdateHugeSwapDiff);
            }
        }
    }
    function _updateOracle(uint newPrice_, uint centerPrice_, uint dexVariables_) internal returns (uint) {
        // time difference between last & current swap
        uint timeDiff_ = block.timestamp - ((dexVariables_ >> 121) & X33);
        uint temp_;
        uint temp2_;
        uint temp3_;
        if (timeDiff_ == 0) {
            // doesn't matter if oracle is on or off when timediff = 0 code for both is same
            // temp_ => oldCenterPrice
            temp_ = (dexVariables_ >> 81) & X40;
            temp_ = (temp_ >> DEFAULT_EXPONENT_SIZE) << (temp_ & DEFAULT_EXPONENT_MASK);
            // Ensure that the center price is within the acceptable range of the old center price if it's not the first swap in the same block
            unchecked {
                if (
                    (centerPrice_ < (((EIGHT_DECIMALS - 1) * temp_) / EIGHT_DECIMALS)) ||
                    (centerPrice_ > (((EIGHT_DECIMALS + 1) * temp_) / EIGHT_DECIMALS))
                ) {
                    revert FluidDexError(ErrorTypes.DexT1__CenterPriceOutOfRange);
                }
            }
            // olderPrice_ => temp_
            temp_ = (dexVariables_ >> 1) & X40;
            temp_ = (temp_ >> DEFAULT_EXPONENT_SIZE) << (temp_ & DEFAULT_EXPONENT_MASK);
            _priceDiffCheck(temp_, newPrice_);
            // 2nd swap in same block no need to update anything around oracle, only need to update last swap price in dexVariables
            return ((dexVariables_ & 0xfffffffffffffffffffffffffffffffffffffffffffe0000000001ffffffffff) |
                (newPrice_.toBigNumber(32, 8, BigMathMinified.ROUND_DOWN) << 41));
        }
        if (((dexVariables_ >> 195) & 1) == 0) {
            // if oracle is not active then just returning updated DEX variable
            temp_ = ((dexVariables_ >> 41) & X40);
            temp_ = (temp_ >> DEFAULT_EXPONENT_SIZE) << (temp_ & DEFAULT_EXPONENT_MASK);
            _priceDiffCheck(temp_, newPrice_);
            
            return ((dexVariables_ & 0xfffffffffffffffffffffffffc00000000000000000000000000000000000001) |
                (((dexVariables_ >> 41) & X40) << 1) |
                (newPrice_.toBigNumber(32, 8, BigMathMinified.ROUND_DOWN) << 41) |
                (centerPrice_.toBigNumber(32, 8, BigMathMinified.ROUND_DOWN) << 81) |
                (block.timestamp << 121));
        } else {
            // oracle is active hence update oracle
            // olderPrice_ => temp_
            temp_ = (dexVariables_ >> 1) & X40;
            temp_ = (temp_ >> DEFAULT_EXPONENT_SIZE) << (temp_ & DEFAULT_EXPONENT_MASK);
            // oldPrice_ => temp2_
            temp2_ = (dexVariables_ >> 41) & X40;
            temp2_ = (temp2_ >> DEFAULT_EXPONENT_SIZE) << (temp2_ & DEFAULT_EXPONENT_MASK);
            int priceDiff_ = _priceDiffCheck(temp2_, newPrice_);
            unchecked {
                // older price w.r.t old price
                priceDiff_ = int(ORACLE_PRECISION) - int((temp_ * ORACLE_PRECISION) / temp2_);
            }
            // priceDiffInPercentAndSign_ => temp3_
            // priceDiff_ will always be lower than ORACLE_LIMIT due to above check
            unchecked {
                if (priceDiff_ < 0) {
                    temp3_ = ((uint(-priceDiff_) * X22) / ORACLE_LIMIT) << 1;
                } else {
                    // if greater than or equal to 0 then make sign flag 1
                    temp3_ = (((uint(priceDiff_) * X22) / ORACLE_LIMIT) << 1) | 1;
                }
            }
            if (timeDiff_ > X22) {
                // if time difference is this then that means DEX has been inactive ~45 days
                // that means oracle price of this DEX should not be used.
                timeDiff_ = X22;
            }
            // temp_ => lastTimeDiff_
            temp_ = (dexVariables_ >> 154) & X22;
            uint nextOracleSlot_ = ((dexVariables_ >> 176) & X3);
            uint oracleMap_ = (dexVariables_ >> 179) & X16;
            if (temp_ > X9) {
                if (nextOracleSlot_ > 0) {
                    // if greater than 0 then current slot has 2 or more oracle slot empty
                    // First 9 bits are of time, so not using that
                    temp3_ = (temp3_ << 41) | (temp_ << 9);
                    _oracle[oracleMap_] = _oracle[oracleMap_] | (temp3_ << (--nextOracleSlot_ * 32));
                    if (nextOracleSlot_ > 0) {
                        --nextOracleSlot_;
                    } else {
                        // if == 0 that means the oracle slots will get filled and shift to next oracle map
                        nextOracleSlot_ = 7;
                        unchecked {
                            oracleMap_ = (oracleMap_ + 1) % TOTAL_ORACLE_MAPPING;
                        }
                        _oracle[oracleMap_] = 0;
                    }
                } else {
                    // if == 0
                    // then seconds will be in last map
                    // precision will be in last map + 1
                    // Storing precision & sign slot in first precision & sign slot and leaving time slot empty
                    temp3_ = temp3_ << 9;
                    _oracle[oracleMap_] = _oracle[oracleMap_] | temp3_;
                    nextOracleSlot_ = 6; // storing 6 here as 7 is going to occupied right now
                    unchecked {
                        oracleMap_ = (oracleMap_ + 1) % TOTAL_ORACLE_MAPPING;
                    }
                    // Storing time in 2nd precision & sign and leaving time slot empty
                    _oracle[oracleMap_] = temp_ << ((7 * 32) + 9);
                }
            } else {
                temp3_ = (temp3_ << 9) | temp_;
                unchecked {
                    if (nextOracleSlot_ < 7) {
                        _oracle[oracleMap_] = _oracle[oracleMap_] | (temp3_ << (nextOracleSlot_ * 32));
                    } else {
                        _oracle[oracleMap_] = temp3_ << ((7 * 32));
                    }
                }
                if (nextOracleSlot_ > 0) {
                    --nextOracleSlot_;
                } else {
                    nextOracleSlot_ = 7;
                    unchecked {
                        oracleMap_ = (oracleMap_ + 1) % TOTAL_ORACLE_MAPPING;
                    }
                    _oracle[oracleMap_] = 0;
                }
            }
            // doing this due to stack too deep error when using params memory variables
            temp_ = newPrice_;
            temp2_ = centerPrice_;
            temp3_ = dexVariables_;
            // then update last price
            return ((temp3_ & 0xfffffffffffffff8000000000000000000000000000000000000000000000001) |
                (((temp3_ >> 41) & X40) << 1) |
                (temp_.toBigNumber(32, 8, BigMathMinified.ROUND_DOWN) << 41) |
                (temp2_.toBigNumber(32, 8, BigMathMinified.ROUND_DOWN) << 81) |
                (block.timestamp << 121) |
                (timeDiff_ << 154) |
                (nextOracleSlot_ << 176) |
                (oracleMap_ << 179));
        }
    }
    function _hookVerify(uint hookAddress_, uint mode_, bool swap0to1_, uint price_) internal {
        try
            IHook(AddressCalcs.addressCalc(DEPLOYER_CONTRACT, hookAddress_)).dexPrice(
                mode_,
                swap0to1_,
                TOKEN_0,
                TOKEN_1,
                price_
            )
        returns (bool isOk_) {
            if (!isOk_) revert FluidDexError(ErrorTypes.DexT1__HookReturnedFalse);
        } catch (bytes memory /*lowLevelData*/) {
            // skip checking hook nothing
        }
    }
    function _updateSupplyShares(uint newTotalShares_) internal {
        uint totalSupplyShares_ = _totalSupplyShares;
        // new total shares are greater than old total shares && new total shares are greater than max supply shares
        if (
            (newTotalShares_ > (totalSupplyShares_ & X128)) && 
            newTotalShares_ > (totalSupplyShares_ >> 128)
        ) {
            revert FluidDexError(ErrorTypes.DexT1__SupplySharesOverflow);
        }
        // keeping max supply shares intact
        _totalSupplyShares = ((totalSupplyShares_ >> 128) << 128) | newTotalShares_;
    }
    function _updateBorrowShares(uint newTotalShares_) internal {
        uint totalBorrowShares_ = _totalBorrowShares;
        // new total shares are greater than old total shares && new total shares are greater than max borrow shares
        if (
            (newTotalShares_ > (totalBorrowShares_ & X128)) && 
            newTotalShares_ > (totalBorrowShares_ >> 128)
        ) {
            revert FluidDexError(ErrorTypes.DexT1__BorrowSharesOverflow);
        }
        // keeping max borrow shares intact
        _totalBorrowShares = ((totalBorrowShares_ >> 128) << 128) | newTotalShares_;
    }
    constructor(ConstantViews memory constantViews_) ImmutableVariables(constantViews_) {}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.21;
import { IFluidLiquidity } from "../../../../liquidity/interfaces/iLiquidity.sol";
import { Structs } from "./structs.sol";
import { ConstantVariables } from "../common/constantVariables.sol";
import { IFluidDexFactory } from "../../interfaces/iDexFactory.sol";
import { Error } from "../../error.sol";
import { ErrorTypes } from "../../errorTypes.sol";
abstract contract ImmutableVariables is ConstantVariables, Structs, Error {
    /*//////////////////////////////////////////////////////////////
                          CONSTANTS / IMMUTABLES
    //////////////////////////////////////////////////////////////*/
    uint256 public immutable DEX_ID;
    /// @dev Address of token 0
    address internal immutable TOKEN_0;
    /// @dev Address of token 1
    address internal immutable TOKEN_1;
    address internal immutable THIS_CONTRACT;
    uint256 internal immutable TOKEN_0_NUMERATOR_PRECISION;
    uint256 internal immutable TOKEN_0_DENOMINATOR_PRECISION;
    uint256 internal immutable TOKEN_1_NUMERATOR_PRECISION;
    uint256 internal immutable TOKEN_1_DENOMINATOR_PRECISION;
    /// @dev Address of liquidity contract
    IFluidLiquidity internal immutable LIQUIDITY;
    /// @dev Address of DEX factory contract
    IFluidDexFactory internal immutable DEX_FACTORY;
    /// @dev Address of Shift implementation
    address internal immutable SHIFT_IMPLEMENTATION;
    /// @dev Address of Admin implementation
    address internal immutable ADMIN_IMPLEMENTATION;
    /// @dev Address of Col Operations implementation
    address internal immutable COL_OPERATIONS_IMPLEMENTATION;
    /// @dev Address of Debt Operations implementation
    address internal immutable DEBT_OPERATIONS_IMPLEMENTATION;
    /// @dev Address of Perfect Operations and Swap Out implementation
    address internal immutable PERFECT_OPERATIONS_AND_SWAP_OUT_IMPLEMENTATION;
    /// @dev Address of contract used for deploying center price & hook related contract
    address internal immutable DEPLOYER_CONTRACT;
    /// @dev Liquidity layer slots
    bytes32 internal immutable SUPPLY_TOKEN_0_SLOT;
    bytes32 internal immutable BORROW_TOKEN_0_SLOT;
    bytes32 internal immutable SUPPLY_TOKEN_1_SLOT;
    bytes32 internal immutable BORROW_TOKEN_1_SLOT;
    bytes32 internal immutable EXCHANGE_PRICE_TOKEN_0_SLOT;
    bytes32 internal immutable EXCHANGE_PRICE_TOKEN_1_SLOT;
    uint256 internal immutable TOTAL_ORACLE_MAPPING;
    function _calcNumeratorAndDenominator(
        address token_
    ) private view returns (uint256 numerator_, uint256 denominator_) {
        uint256 decimals_ = _decimals(token_);
        if (decimals_ > TOKENS_DECIMALS_PRECISION) {
            numerator_ = 1;
            denominator_ = 10 ** (decimals_ - TOKENS_DECIMALS_PRECISION);
        } else {
            numerator_ = 10 ** (TOKENS_DECIMALS_PRECISION - decimals_);
            denominator_ = 1;
        }
    }
    constructor(ConstantViews memory constants_) {
        THIS_CONTRACT = address(this);
        DEX_ID = constants_.dexId;
        LIQUIDITY = IFluidLiquidity(constants_.liquidity);
        DEX_FACTORY = IFluidDexFactory(constants_.factory);
        TOKEN_0 = constants_.token0;
        TOKEN_1 = constants_.token1;
        if (TOKEN_0 >= TOKEN_1) revert FluidDexError(ErrorTypes.DexT1__Token0ShouldBeSmallerThanToken1);
        (TOKEN_0_NUMERATOR_PRECISION, TOKEN_0_DENOMINATOR_PRECISION) = _calcNumeratorAndDenominator(TOKEN_0);
        (TOKEN_1_NUMERATOR_PRECISION, TOKEN_1_DENOMINATOR_PRECISION) = _calcNumeratorAndDenominator(TOKEN_1);
        if (constants_.implementations.shift != address(0)) {
            SHIFT_IMPLEMENTATION = constants_.implementations.shift;
        } else {
            SHIFT_IMPLEMENTATION = address(this);
        }
        if (constants_.implementations.admin != address(0)) {
            ADMIN_IMPLEMENTATION = constants_.implementations.admin;
        } else {
            ADMIN_IMPLEMENTATION = address(this);
        }
        if (constants_.implementations.colOperations != address(0)) {
            COL_OPERATIONS_IMPLEMENTATION = constants_.implementations.colOperations;
        } else {
            COL_OPERATIONS_IMPLEMENTATION = address(this);
        }
        if (constants_.implementations.debtOperations != address(0)) {
            DEBT_OPERATIONS_IMPLEMENTATION = constants_.implementations.debtOperations;
        } else {
            DEBT_OPERATIONS_IMPLEMENTATION = address(this);
        }
        if (constants_.implementations.perfectOperationsAndSwapOut != address(0)) {
            PERFECT_OPERATIONS_AND_SWAP_OUT_IMPLEMENTATION = constants_.implementations.perfectOperationsAndSwapOut;
        } else {
            PERFECT_OPERATIONS_AND_SWAP_OUT_IMPLEMENTATION = address(this);
        }
        DEPLOYER_CONTRACT = constants_.deployerContract;
        SUPPLY_TOKEN_0_SLOT = constants_.supplyToken0Slot;
        BORROW_TOKEN_0_SLOT = constants_.borrowToken0Slot;
        SUPPLY_TOKEN_1_SLOT = constants_.supplyToken1Slot;
        BORROW_TOKEN_1_SLOT = constants_.borrowToken1Slot;
        EXCHANGE_PRICE_TOKEN_0_SLOT = constants_.exchangePriceToken0Slot;
        EXCHANGE_PRICE_TOKEN_1_SLOT = constants_.exchangePriceToken1Slot;
        if (constants_.oracleMapping > X16) revert FluidDexError(ErrorTypes.DexT1__OracleMappingOverflow);
        TOTAL_ORACLE_MAPPING = constants_.oracleMapping;
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.21;
interface IHook {
    /// @notice Hook function to check for liquidation opportunities before external swaps
    /// @dev The primary use of this hook is to check if a particular pair vault has liquidation available.
    ///      If liquidation is available, it gives priority to the liquidation process before allowing external swaps.
    ///      In most cases, this hook will not be set.
    /// @param id_ Identifier for the operation type: 1 for swap, 2 for internal arbitrage
    /// @param swap0to1_ Direction of the swap: true if swapping token0 for token1, false otherwise
    /// @param token0_ Address of the first token in the pair
    /// @param token1_ Address of the second token in the pair
    /// @param price_ The price ratio of token1 to token0, expressed with 27 decimal places
    /// @return isOk_ Boolean indicating whether the operation should proceed
    function dexPrice(
        uint id_,
        bool swap0to1_,
        address token0_,
        address token1_,
        uint price_
    ) external returns (bool isOk_);
}
interface ICenterPrice {
    /// @notice Retrieves the center price for the pool
    /// @dev This function is marked as non-constant (potentially state-changing) to allow flexibility in price fetching mechanisms.
    ///      While typically used as a read-only operation, this design permits write operations if needed for certain token pairs
    ///      (e.g., fetching up-to-date exchange rates that may require state changes).
    /// @return price The current price ratio of token1 to token0, expressed with 27 decimal places
    function centerPrice() external returns (uint price);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.21;
abstract contract Structs {
    struct PricesAndExchangePrice {
        uint lastStoredPrice; // last stored price in 1e27 decimals
        uint centerPrice; // last stored price in 1e27 decimals
        uint upperRange; // price at upper range in 1e27 decimals
        uint lowerRange; // price at lower range in 1e27 decimals
        uint geometricMean; // geometric mean of upper range & lower range in 1e27 decimals
        uint supplyToken0ExchangePrice;
        uint borrowToken0ExchangePrice;
        uint supplyToken1ExchangePrice;
        uint borrowToken1ExchangePrice;
    }
    struct ExchangePrices {
        uint supplyToken0ExchangePrice;
        uint borrowToken0ExchangePrice;
        uint supplyToken1ExchangePrice;
        uint borrowToken1ExchangePrice;
    }
    struct CollateralReserves {
        uint token0RealReserves;
        uint token1RealReserves;
        uint token0ImaginaryReserves;
        uint token1ImaginaryReserves;
    }
    struct CollateralReservesSwap {
        uint tokenInRealReserves;
        uint tokenOutRealReserves;
        uint tokenInImaginaryReserves;
        uint tokenOutImaginaryReserves;
    }
    struct DebtReserves {
        uint token0Debt;
        uint token1Debt;
        uint token0RealReserves;
        uint token1RealReserves;
        uint token0ImaginaryReserves;
        uint token1ImaginaryReserves;
    }
    struct DebtReservesSwap {
        uint tokenInDebt;
        uint tokenOutDebt;
        uint tokenInRealReserves;
        uint tokenOutRealReserves;
        uint tokenInImaginaryReserves;
        uint tokenOutImaginaryReserves;
    }
    struct SwapInMemory {
        address tokenIn;
        address tokenOut;
        uint256 amtInAdjusted;
        address withdrawTo;
        address borrowTo;
        uint price; // price of pool after swap
        uint fee; // fee of pool
        uint revenueCut; // revenue cut of pool
        bool swap0to1;
        int swapRoutingAmt;
        bytes data; // just added to avoid stack-too-deep error
    }
    struct SwapOutMemory {
        address tokenIn;
        address tokenOut;
        uint256 amtOutAdjusted;
        address withdrawTo;
        address borrowTo;
        uint price; // price of pool after swap
        uint fee;
        uint revenueCut; // revenue cut of pool
        bool swap0to1;
        int swapRoutingAmt;
        bytes data; // just added to avoid stack-too-deep error
        uint msgValue;
    }
    struct DepositColMemory {
        uint256 token0AmtAdjusted;
        uint256 token1AmtAdjusted;
        uint256 token0ReservesInitial;
        uint256 token1ReservesInitial;
    }
    struct WithdrawColMemory {
        uint256 token0AmtAdjusted;
        uint256 token1AmtAdjusted;
        uint256 token0ReservesInitial;
        uint256 token1ReservesInitial;
        address to;
    }
    struct BorrowDebtMemory {
        uint256 token0AmtAdjusted;
        uint256 token1AmtAdjusted;
        uint256 token0DebtInitial;
        uint256 token1DebtInitial;
        address to;
    }
    struct PaybackDebtMemory {
        uint256 token0AmtAdjusted;
        uint256 token1AmtAdjusted;
        uint256 token0DebtInitial;
        uint256 token1DebtInitial;
    }
    struct OraclePriceMemory {
        uint lowestPrice1by0;
        uint highestPrice1by0;
        uint oracleSlot;
        uint oracleMap;
        uint oracle;
    }
    struct Oracle {
        uint twap1by0; // TWAP price
        uint lowestPrice1by0; // lowest price point
        uint highestPrice1by0; // highest price point
        uint twap0by1; // TWAP price
        uint lowestPrice0by1; // lowest price point
        uint highestPrice0by1; // highest price point
    }
    struct Implementations {
        address shift;
        address admin;
        address colOperations;
        address debtOperations;
        address perfectOperationsAndSwapOut;
    }
    struct ConstantViews {
        uint256 dexId;
        address liquidity;
        address factory;
        Implementations implementations;
        address deployerContract;
        address token0;
        address token1;
        bytes32 supplyToken0Slot;
        bytes32 borrowToken0Slot;
        bytes32 supplyToken1Slot;
        bytes32 borrowToken1Slot;
        bytes32 exchangePriceToken0Slot;
        bytes32 exchangePriceToken1Slot;
        uint256 oracleMapping;
    }
    struct ConstantViews2 {
        uint token0NumeratorPrecision;
        uint token0DenominatorPrecision;
        uint token1NumeratorPrecision;
        uint token1DenominatorPrecision;
    }
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;
/// @notice Arithmetic library with operations for fixed-point numbers.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/utils/FixedPointMathLib.sol)
/// @author Inspired by USM (https://github.com/usmfum/USM/blob/master/contracts/WadMath.sol)
library FixedPointMathLib {
    /*//////////////////////////////////////////////////////////////
                    SIMPLIFIED FIXED POINT OPERATIONS
    //////////////////////////////////////////////////////////////*/
    uint256 internal constant MAX_UINT256 = 2**256 - 1;
    uint256 internal constant WAD = 1e18; // The scalar of ETH and most ERC20s.
    function mulWadDown(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivDown(x, y, WAD); // Equivalent to (x * y) / WAD rounded down.
    }
    function mulWadUp(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivUp(x, y, WAD); // Equivalent to (x * y) / WAD rounded up.
    }
    function divWadDown(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivDown(x, WAD, y); // Equivalent to (x * WAD) / y rounded down.
    }
    function divWadUp(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivUp(x, WAD, y); // Equivalent to (x * WAD) / y rounded up.
    }
    /*//////////////////////////////////////////////////////////////
                    LOW LEVEL FIXED POINT OPERATIONS
    //////////////////////////////////////////////////////////////*/
    function mulDivDown(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 z) {
        /// @solidity memory-safe-assembly
        assembly {
            // Equivalent to require(denominator != 0 && (y == 0 || x <= type(uint256).max / y))
            if iszero(mul(denominator, iszero(mul(y, gt(x, div(MAX_UINT256, y)))))) {
                revert(0, 0)
            }
            // Divide x * y by the denominator.
            z := div(mul(x, y), denominator)
        }
    }
    function mulDivUp(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 z) {
        /// @solidity memory-safe-assembly
        assembly {
            // Equivalent to require(denominator != 0 && (y == 0 || x <= type(uint256).max / y))
            if iszero(mul(denominator, iszero(mul(y, gt(x, div(MAX_UINT256, y)))))) {
                revert(0, 0)
            }
            // If x * y modulo the denominator is strictly greater than 0,
            // 1 is added to round up the division of x * y by the denominator.
            z := add(gt(mod(mul(x, y), denominator), 0), div(mul(x, y), denominator))
        }
    }
    function rpow(
        uint256 x,
        uint256 n,
        uint256 scalar
    ) internal pure returns (uint256 z) {
        /// @solidity memory-safe-assembly
        assembly {
            switch x
            case 0 {
                switch n
                case 0 {
                    // 0 ** 0 = 1
                    z := scalar
                }
                default {
                    // 0 ** n = 0
                    z := 0
                }
            }
            default {
                switch mod(n, 2)
                case 0 {
                    // If n is even, store scalar in z for now.
                    z := scalar
                }
                default {
                    // If n is odd, store x in z for now.
                    z := x
                }
                // Shifting right by 1 is like dividing by 2.
                let half := shr(1, scalar)
                for {
                    // Shift n right by 1 before looping to halve it.
                    n := shr(1, n)
                } n {
                    // Shift n right by 1 each iteration to halve it.
                    n := shr(1, n)
                } {
                    // Revert immediately if x ** 2 would overflow.
                    // Equivalent to iszero(eq(div(xx, x), x)) here.
                    if shr(128, x) {
                        revert(0, 0)
                    }
                    // Store x squared.
                    let xx := mul(x, x)
                    // Round to the nearest number.
                    let xxRound := add(xx, half)
                    // Revert if xx + half overflowed.
                    if lt(xxRound, xx) {
                        revert(0, 0)
                    }
                    // Set x to scaled xxRound.
                    x := div(xxRound, scalar)
                    // If n is even:
                    if mod(n, 2) {
                        // Compute z * x.
                        let zx := mul(z, x)
                        // If z * x overflowed:
                        if iszero(eq(div(zx, x), z)) {
                            // Revert if x is non-zero.
                            if iszero(iszero(x)) {
                                revert(0, 0)
                            }
                        }
                        // Round to the nearest number.
                        let zxRound := add(zx, half)
                        // Revert if zx + half overflowed.
                        if lt(zxRound, zx) {
                            revert(0, 0)
                        }
                        // Return properly scaled zxRound.
                        z := div(zxRound, scalar)
                    }
                }
            }
        }
    }
    /*//////////////////////////////////////////////////////////////
                        GENERAL NUMBER UTILITIES
    //////////////////////////////////////////////////////////////*/
    function sqrt(uint256 x) internal pure returns (uint256 z) {
        /// @solidity memory-safe-assembly
        assembly {
            let y := x // We start y at x, which will help us make our initial estimate.
            z := 181 // The "correct" value is 1, but this saves a multiplication later.
            // This segment is to get a reasonable initial estimate for the Babylonian method. With a bad
            // start, the correct # of bits increases ~linearly each iteration instead of ~quadratically.
            // We check y >= 2^(k + 8) but shift right by k bits
            // each branch to ensure that if x >= 256, then y >= 256.
            if iszero(lt(y, 0x10000000000000000000000000000000000)) {
                y := shr(128, y)
                z := shl(64, z)
            }
            if iszero(lt(y, 0x1000000000000000000)) {
                y := shr(64, y)
                z := shl(32, z)
            }
            if iszero(lt(y, 0x10000000000)) {
                y := shr(32, y)
                z := shl(16, z)
            }
            if iszero(lt(y, 0x1000000)) {
                y := shr(16, y)
                z := shl(8, z)
            }
            // Goal was to get z*z*y within a small factor of x. More iterations could
            // get y in a tighter range. Currently, we will have y in [256, 256*2^16).
            // We ensured y >= 256 so that the relative difference between y and y+1 is small.
            // That's not possible if x < 256 but we can just verify those cases exhaustively.
            // Now, z*z*y <= x < z*z*(y+1), and y <= 2^(16+8), and either y >= 256, or x < 256.
            // Correctness can be checked exhaustively for x < 256, so we assume y >= 256.
            // Then z*sqrt(y) is within sqrt(257)/sqrt(256) of sqrt(x), or about 20bps.
            // For s in the range [1/256, 256], the estimate f(s) = (181/1024) * (s+1) is in the range
            // (1/2.84 * sqrt(s), 2.84 * sqrt(s)), with largest error when s = 1 and when s = 256 or 1/256.
            // Since y is in [256, 256*2^16), let a = y/65536, so that a is in [1/256, 256). Then we can estimate
            // sqrt(y) using sqrt(65536) * 181/1024 * (a + 1) = 181/4 * (y + 65536)/65536 = 181 * (y + 65536)/2^18.
            // There is no overflow risk here since y < 2^136 after the first branch above.
            z := shr(18, mul(z, add(y, 65536))) // A mul() is saved from starting z at 181.
            // Given the worst case multiplicative error of 2.84 above, 7 iterations should be enough.
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            // If x+1 is a perfect square, the Babylonian method cycles between
            // floor(sqrt(x)) and ceil(sqrt(x)). This statement ensures we return floor.
            // See: https://en.wikipedia.org/wiki/Integer_square_root#Using_only_integer_division
            // Since the ceil is rare, we save gas on the assignment and repeat division in the rare case.
            // If you don't care whether the floor or ceil square root is returned, you can remove this statement.
            z := sub(z, lt(div(x, z), z))
        }
    }
    function unsafeMod(uint256 x, uint256 y) internal pure returns (uint256 z) {
        /// @solidity memory-safe-assembly
        assembly {
            // Mod x by y. Note this will return
            // 0 instead of reverting if y is zero.
            z := mod(x, y)
        }
    }
    function unsafeDiv(uint256 x, uint256 y) internal pure returns (uint256 r) {
        /// @solidity memory-safe-assembly
        assembly {
            // Divide x by y. Note this will return
            // 0 instead of reverting if y is zero.
            r := div(x, y)
        }
    }
    function unsafeDivUp(uint256 x, uint256 y) internal pure returns (uint256 z) {
        /// @solidity memory-safe-assembly
        assembly {
            // Add 1 to x * y if x % y > 0. Note this will
            // return 0 instead of reverting if y is zero.
            z := add(gt(mod(x, y), 0), div(x, y))
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.9;
import '@openzeppelin/contracts/token/ERC20/IERC20.sol';
import '@openzeppelin/contracts/utils/Context.sol';
import '@openzeppelin/contracts/access/Ownable.sol';
import '@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol';
import './dependency/Permitable.sol';
import './interfaces/IAggregationExecutor.sol';
import './interfaces/IAggregationExecutor1Inch.sol';
import './libraries/TransferHelper.sol';
import './libraries/RevertReasonParser.sol';
contract MetaAggregationRouterV2 is Permitable, Ownable {
  using SafeERC20 for IERC20;
  address public immutable WETH;
  address private constant ETH_ADDRESS = address(0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE);
  uint256 private constant _PARTIAL_FILL = 0x01;
  uint256 private constant _REQUIRES_EXTRA_ETH = 0x02;
  uint256 private constant _SHOULD_CLAIM = 0x04;
  uint256 private constant _BURN_FROM_MSG_SENDER = 0x08;
  uint256 private constant _BURN_FROM_TX_ORIGIN = 0x10;
  uint256 private constant _SIMPLE_SWAP = 0x20;
  uint256 private constant _FEE_ON_DST = 0x40;
  uint256 private constant _FEE_IN_BPS = 0x80;
  uint256 private constant _APPROVE_FUND = 0x100;
  uint256 private constant BPS = 10000;
  mapping(address => bool) public isWhitelist;
  struct SwapDescriptionV2 {
    IERC20 srcToken;
    IERC20 dstToken;
    address[] srcReceivers; // transfer src token to these addresses, default
    uint256[] srcAmounts;
    address[] feeReceivers;
    uint256[] feeAmounts;
    address dstReceiver;
    uint256 amount;
    uint256 minReturnAmount;
    uint256 flags;
    bytes permit;
  }
  /// @dev  use for swapGeneric and swap to avoid stack too deep
  struct SwapExecutionParams {
    address callTarget; // call this address
    address approveTarget; // approve this address if _APPROVE_FUND set
    bytes targetData;
    SwapDescriptionV2 desc;
    bytes clientData;
  }
  struct SimpleSwapData {
    address[] firstPools;
    uint256[] firstSwapAmounts;
    bytes[] swapDatas;
    uint256 deadline;
    bytes destTokenFeeData;
  }
  event Swapped(
    address sender,
    IERC20 srcToken,
    IERC20 dstToken,
    address dstReceiver,
    uint256 spentAmount,
    uint256 returnAmount
  );
  event ClientData(bytes clientData);
  event Exchange(address pair, uint256 amountOut, address output);
  event Fee(address token, uint256 totalAmount, uint256 totalFee, address[] recipients, uint256[] amounts, bool isBps);
  constructor(address _WETH) {
    WETH = _WETH;
  }
  receive() external payable {}
  function rescueFunds(address token, uint256 amount) external onlyOwner {
    if (_isETH(IERC20(token))) {
      TransferHelper.safeTransferETH(msg.sender, amount);
    } else {
      TransferHelper.safeTransfer(token, msg.sender, amount);
    }
  }
  function updateWhitelist(address[] memory addr, bool[] memory value) external onlyOwner {
    require(addr.length == value.length);
    for (uint256 i; i < addr.length; ++i) {
      isWhitelist[addr[i]] = value[i];
    }
  }
  function swapGeneric(SwapExecutionParams calldata execution)
    external
    payable
    returns (uint256 returnAmount, uint256 gasUsed)
  {
    uint256 gasBefore = gasleft();
    require(isWhitelist[execution.callTarget], 'Address not whitelisted');
    if (execution.approveTarget != execution.callTarget && execution.approveTarget != address(0)) {
      require(isWhitelist[execution.approveTarget], 'Address not whitelisted');
    }
    SwapDescriptionV2 memory desc = execution.desc;
    require(desc.minReturnAmount > 0, 'Invalid min return amount');
    // if extra eth is needed, in case srcToken is ETH
    _collectExtraETHIfNeeded(desc);
    _permit(desc.srcToken, desc.amount, desc.permit);
    bool feeInBps = _flagsChecked(desc.flags, _FEE_IN_BPS);
    uint256 spentAmount;
    address dstReceiver = desc.dstReceiver == address(0) ? msg.sender : desc.dstReceiver;
    if (!_flagsChecked(desc.flags, _FEE_ON_DST)) {
      // fee on src token
      // take fee on srcToken
      // take fee and deduct total amount
      desc.amount = _takeFee(desc.srcToken, msg.sender, desc.feeReceivers, desc.feeAmounts, desc.amount, feeInBps);
      bool collected;
      if (!_isETH(desc.srcToken) && _flagsChecked(desc.flags, _SHOULD_CLAIM)) {
        (collected, desc.amount) = _collectTokenIfNeeded(desc, msg.sender, address(this));
      }
      _transferFromOrApproveTarget(msg.sender, execution.approveTarget, desc, collected);
      // execute swap
      (spentAmount, returnAmount) = _executeSwap(
        execution.callTarget,
        execution.targetData,
        desc,
        _isETH(desc.srcToken) ? desc.amount : 0,
        dstReceiver
      );
    } else {
      bool collected;
      if (!_isETH(desc.srcToken) && _flagsChecked(desc.flags, _SHOULD_CLAIM)) {
        (collected, desc.amount) = _collectTokenIfNeeded(desc, msg.sender, address(this));
      }
      uint256 initialDstReceiverBalance = _getBalance(desc.dstToken, dstReceiver);
      _transferFromOrApproveTarget(msg.sender, execution.approveTarget, desc, collected);
      // fee on dst token
      // router get dst token first
      (spentAmount, returnAmount) = _executeSwap(
        execution.callTarget,
        execution.targetData,
        desc,
        _isETH(desc.srcToken) ? msg.value : 0,
        address(this)
      );
      {
        // then take fee on dst token
        uint256 leftAmount = _takeFee(
          desc.dstToken,
          address(this),
          desc.feeReceivers,
          desc.feeAmounts,
          returnAmount,
          feeInBps
        );
        _doTransferERC20(desc.dstToken, address(this), dstReceiver, leftAmount);
      }
      returnAmount = _getBalance(desc.dstToken, dstReceiver) - initialDstReceiverBalance;
    }
    // check return amount
    _checkReturnAmount(spentAmount, returnAmount, desc);
    //revoke allowance
    if (!_isETH(desc.srcToken) && execution.approveTarget != address(0)) {
      desc.srcToken.safeApprove(execution.approveTarget, 0);
    }
    emit Swapped(msg.sender, desc.srcToken, desc.dstToken, dstReceiver, spentAmount, returnAmount);
    emit Exchange(execution.callTarget, returnAmount, _isETH(desc.dstToken) ? WETH : address(desc.dstToken));
    emit ClientData(execution.clientData);
    unchecked {
      gasUsed = gasBefore - gasleft();
    }
  }
  function swap(SwapExecutionParams calldata execution)
    external
    payable
    returns (uint256 returnAmount, uint256 gasUsed)
  {
    uint256 gasBefore = gasleft();
    SwapDescriptionV2 memory desc = execution.desc;
    require(desc.minReturnAmount > 0, 'Min return should not be 0');
    require(execution.targetData.length > 0, 'executorData should be not zero');
    // simple mode swap
    if (_flagsChecked(desc.flags, _SIMPLE_SWAP)) {
      return
        swapSimpleMode(IAggregationExecutor(execution.callTarget), desc, execution.targetData, execution.clientData);
    }
    _collectExtraETHIfNeeded(desc);
    _permit(desc.srcToken, desc.amount, desc.permit);
    bool feeInBps = _flagsChecked(desc.flags, _FEE_IN_BPS);
    uint256 spentAmount;
    address dstReceiver = desc.dstReceiver == address(0) ? msg.sender : desc.dstReceiver;
    if (!_flagsChecked(desc.flags, _FEE_ON_DST)) {
      // fee on src token
      {
        // take fee on srcToken
        // deduct total swap amount
        desc.amount = _takeFee(
          desc.srcToken,
          msg.sender,
          desc.feeReceivers,
          desc.feeAmounts,
          _isETH(desc.srcToken) ? msg.value : desc.amount,
          feeInBps
        );
        // transfer fund from msg.sender to our executor
        _transferFromOrApproveTarget(msg.sender, address(0), desc, false);
        // execute swap
        (spentAmount, returnAmount) = _executeSwap(
          execution.callTarget,
          abi.encodeWithSelector(IAggregationExecutor.callBytes.selector, execution.targetData),
          desc,
          _isETH(desc.srcToken) ? desc.amount : 0,
          dstReceiver
        );
      }
    } else {
      // fee on dst token
      // router get dst token first
      uint256 initialDstReceiverBalance = _getBalance(desc.dstToken, dstReceiver);
      // transfer fund from msg.sender to our executor
      _transferFromOrApproveTarget(msg.sender, address(0), desc, false);
      // swap to receive dstToken on this router
      (spentAmount, returnAmount) = _executeSwap(
        execution.callTarget,
        abi.encodeWithSelector(IAggregationExecutor.callBytes.selector, execution.targetData),
        desc,
        _isETH(desc.srcToken) ? msg.value : 0,
        address(this)
      );
      {
        // then take fee on dst token
        uint256 leftAmount = _takeFee(
          desc.dstToken,
          address(this),
          desc.feeReceivers,
          desc.feeAmounts,
          returnAmount,
          feeInBps
        );
        _doTransferERC20(desc.dstToken, address(this), dstReceiver, leftAmount);
      }
      returnAmount = _getBalance(desc.dstToken, dstReceiver) - initialDstReceiverBalance;
    }
    _checkReturnAmount(spentAmount, returnAmount, desc);
    emit Swapped(msg.sender, desc.srcToken, desc.dstToken, dstReceiver, spentAmount, returnAmount);
    emit Exchange(execution.callTarget, returnAmount, _isETH(desc.dstToken) ? WETH : address(desc.dstToken));
    emit ClientData(execution.clientData);
    unchecked {
      gasUsed = gasBefore - gasleft();
    }
  }
  function swapSimpleMode(
    IAggregationExecutor caller,
    SwapDescriptionV2 memory desc,
    bytes calldata executorData,
    bytes calldata clientData
  ) public returns (uint256 returnAmount, uint256 gasUsed) {
    uint256 gasBefore = gasleft();
    require(!_isETH(desc.srcToken), 'src is eth, should use normal swap');
    _permit(desc.srcToken, desc.amount, desc.permit);
    address dstReceiver = (desc.dstReceiver == address(0)) ? msg.sender : desc.dstReceiver;
    {
      bool isBps = _flagsChecked(desc.flags, _FEE_IN_BPS);
      if (!_flagsChecked(desc.flags, _FEE_ON_DST)) {
        // take fee and deduct total swap amount
        desc.amount = _takeFee(desc.srcToken, msg.sender, desc.feeReceivers, desc.feeAmounts, desc.amount, isBps);
      } else {
        dstReceiver = address(this);
      }
    }
    uint256 initialDstBalance = _getBalance(desc.dstToken, dstReceiver);
    uint256 initialSrcBalance = _getBalance(desc.srcToken, msg.sender);
    _swapMultiSequencesWithSimpleMode(
      caller,
      address(desc.srcToken),
      desc.amount,
      address(desc.dstToken),
      dstReceiver,
      executorData
    );
    // amount returned to this router
    returnAmount = _getBalance(desc.dstToken, dstReceiver) - initialDstBalance;
    {
      // take fee
      if (_flagsChecked(desc.flags, _FEE_ON_DST)) {
        {
          bool isBps = _flagsChecked(desc.flags, _FEE_IN_BPS);
          returnAmount = _takeFee(
            desc.dstToken,
            address(this),
            desc.feeReceivers,
            desc.feeAmounts,
            returnAmount,
            isBps
          );
        }
        IERC20 dstToken = desc.dstToken;
        dstReceiver = desc.dstReceiver == address(0) ? msg.sender : desc.dstReceiver;
        // dst receiver initial balance
        initialDstBalance = _getBalance(dstToken, dstReceiver);
        // transfer remainning token to dst receiver
        _doTransferERC20(dstToken, address(this), dstReceiver, returnAmount);
        // amount returned to dst receiver
        returnAmount = _getBalance(dstToken, dstReceiver) - initialDstBalance;
      }
    }
    uint256 spentAmount = initialSrcBalance - _getBalance(desc.srcToken, msg.sender);
    _checkReturnAmount(spentAmount, returnAmount, desc);
    emit Swapped(msg.sender, desc.srcToken, desc.dstToken, dstReceiver, spentAmount, returnAmount);
    emit Exchange(address(caller), returnAmount, _isETH(desc.dstToken) ? WETH : address(desc.dstToken));
    emit ClientData(clientData);
    unchecked {
      gasUsed = gasBefore - gasleft();
    }
  }
  function _doTransferERC20(
    IERC20 token,
    address from,
    address to,
    uint256 amount
  ) internal {
    require(from != to, 'sender != recipient');
    if (amount > 0) {
      if (_isETH(token)) {
        if (from == address(this)) TransferHelper.safeTransferETH(to, amount);
      } else {
        if (from == address(this)) {
          TransferHelper.safeTransfer(address(token), to, amount);
        } else {
          TransferHelper.safeTransferFrom(address(token), from, to, amount);
        }
      }
    }
  }
  // Only use this mode if the first pool of each sequence can receive tokenIn directly into the pool
  function _swapMultiSequencesWithSimpleMode(
    IAggregationExecutor caller,
    address tokenIn,
    uint256 totalSwapAmount,
    address tokenOut,
    address dstReceiver,
    bytes calldata data
  ) internal {
    SimpleSwapData memory swapData = abi.decode(data, (SimpleSwapData));
    require(swapData.deadline >= block.timestamp, 'ROUTER: Expired');
    require(
      swapData.firstPools.length == swapData.firstSwapAmounts.length &&
        swapData.firstPools.length == swapData.swapDatas.length,
      'invalid swap data length'
    );
    uint256 numberSeq = swapData.firstPools.length;
    for (uint256 i = 0; i < numberSeq; i++) {
      // collect amount to the first pool
      {
        uint256 balanceBefore = _getBalance(IERC20(tokenIn), msg.sender);
        _doTransferERC20(IERC20(tokenIn), msg.sender, swapData.firstPools[i], swapData.firstSwapAmounts[i]);
        require(swapData.firstSwapAmounts[i] <= totalSwapAmount, 'invalid swap amount');
        uint256 spentAmount = balanceBefore - _getBalance(IERC20(tokenIn), msg.sender);
        totalSwapAmount -= spentAmount;
      }
      {
        // solhint-disable-next-line avoid-low-level-calls
        // may take some native tokens for commission fee
        (bool success, bytes memory result) = address(caller).call(
          abi.encodeWithSelector(caller.swapSingleSequence.selector, swapData.swapDatas[i])
        );
        if (!success) {
          revert(RevertReasonParser.parse(result, 'swapSingleSequence failed: '));
        }
      }
    }
    {
      // solhint-disable-next-line avoid-low-level-calls
      // may take some native tokens for commission fee
      (bool success, bytes memory result) = address(caller).call(
        abi.encodeWithSelector(
          caller.finalTransactionProcessing.selector,
          tokenIn,
          tokenOut,
          dstReceiver,
          swapData.destTokenFeeData
        )
      );
      if (!success) {
        revert(RevertReasonParser.parse(result, 'finalTransactionProcessing failed: '));
      }
    }
  }
  function _getBalance(IERC20 token, address account) internal view returns (uint256) {
    if (_isETH(token)) {
      return account.balance;
    } else {
      return token.balanceOf(account);
    }
  }
  function _isETH(IERC20 token) internal pure returns (bool) {
    return (address(token) == ETH_ADDRESS);
  }
  /// @dev this function calls to external contract to execute swap and also validate the returned amounts
  function _executeSwap(
    address callTarget,
    bytes memory targetData,
    SwapDescriptionV2 memory desc,
    uint256 value,
    address dstReceiver
  ) internal returns (uint256 spentAmount, uint256 returnAmount) {
    uint256 initialDstBalance = _getBalance(desc.dstToken, dstReceiver);
    uint256 routerInitialSrcBalance = _getBalance(desc.srcToken, address(this));
    uint256 routerInitialDstBalance = _getBalance(desc.dstToken, address(this));
    {
      // call to external contract
      (bool success, ) = callTarget.call{value: value}(targetData);
      require(success, 'Call failed');
    }
    // if the `callTarget` returns amount to `msg.sender`, meaning this contract
    if (dstReceiver != address(this)) {
      uint256 stuckAmount = _getBalance(desc.dstToken, address(this)) - routerInitialDstBalance;
      _doTransferERC20(desc.dstToken, address(this), dstReceiver, stuckAmount);
    }
    // safe check here
    returnAmount = _getBalance(desc.dstToken, dstReceiver) - initialDstBalance;
    spentAmount = desc.amount;
    //should refund tokens router collected when partial fill
    if (
      _flagsChecked(desc.flags, _PARTIAL_FILL) && (_isETH(desc.srcToken) || _flagsChecked(desc.flags, _SHOULD_CLAIM))
    ) {
      uint256 currBalance = _getBalance(desc.srcToken, address(this));
      if (currBalance != routerInitialSrcBalance) {
        spentAmount = routerInitialSrcBalance - currBalance;
        _doTransferERC20(desc.srcToken, address(this), msg.sender, desc.amount - spentAmount);
      }
    }
  }
  function _collectExtraETHIfNeeded(SwapDescriptionV2 memory desc) internal {
    bool srcETH = _isETH(desc.srcToken);
    if (_flagsChecked(desc.flags, _REQUIRES_EXTRA_ETH)) {
      require(msg.value > (srcETH ? desc.amount : 0), 'Invalid msg.value');
    } else {
      require(msg.value == (srcETH ? desc.amount : 0), 'Invalid msg.value');
    }
  }
  function _collectTokenIfNeeded(
    SwapDescriptionV2 memory desc,
    address from,
    address to
  ) internal returns (bool collected, uint256 amount) {
    require(!_isETH(desc.srcToken), 'Claim token is ETH');
    uint256 initialRouterSrcBalance = _getBalance(desc.srcToken, address(this));
    _doTransferERC20(desc.srcToken, from, to, desc.amount);
    collected = true;
    amount = _getBalance(desc.srcToken, address(this)) - initialRouterSrcBalance;
  }
  /// @dev transfer fund to `callTarget` or approve `approveTarget`
  function _transferFromOrApproveTarget(
    address from,
    address approveTarget,
    SwapDescriptionV2 memory desc,
    bool collected
  ) internal {
    // if token is collected
    require(desc.srcReceivers.length == desc.srcAmounts.length, 'invalid srcReceivers length');
    if (collected) {
      if (_flagsChecked(desc.flags, _APPROVE_FUND) && approveTarget != address(0)) {
        // approve to approveTarget since some systems use an allowance proxy contract
        desc.srcToken.safeIncreaseAllowance(approveTarget, desc.amount);
        return;
      }
    }
    uint256 total;
    for (uint256 i; i < desc.srcReceivers.length; ++i) {
      total += desc.srcAmounts[i];
      _doTransferERC20(desc.srcToken, collected ? address(this) : from, desc.srcReceivers[i], desc.srcAmounts[i]);
    }
    require(total <= desc.amount, 'Exceeded desc.amount');
  }
  /// @dev token transferred from `from` to `feeData.recipients`
  function _takeFee(
    IERC20 token,
    address from,
    address[] memory recipients,
    uint256[] memory amounts,
    uint256 totalAmount,
    bool inBps
  ) internal returns (uint256 leftAmount) {
    leftAmount = totalAmount;
    uint256 recipientsLen = recipients.length;
    if (recipientsLen > 0) {
      bool isETH = _isETH(token);
      uint256 balanceBefore = _getBalance(token, isETH ? address(this) : from);
      require(amounts.length == recipientsLen, 'Invalid length');
      for (uint256 i; i < recipientsLen; ++i) {
        uint256 amount = inBps ? (totalAmount * amounts[i]) / BPS : amounts[i];
        _doTransferERC20(token, isETH ? address(this) : from, recipients[i], amount);
      }
      uint256 totalFee = balanceBefore - _getBalance(token, isETH ? address(this) : from);
      leftAmount = totalAmount - totalFee;
      emit Fee(address(token), totalAmount, totalFee, recipients, amounts, inBps);
    }
  }
  function _checkReturnAmount(
    uint256 spentAmount,
    uint256 returnAmount,
    SwapDescriptionV2 memory desc
  ) internal pure {
    if (_flagsChecked(desc.flags, _PARTIAL_FILL)) {
      require(returnAmount * desc.amount >= desc.minReturnAmount * spentAmount, 'Return amount is not enough');
    } else {
      require(returnAmount >= desc.minReturnAmount, 'Return amount is not enough');
    }
  }
  function _flagsChecked(uint256 number, uint256 flag) internal pure returns (bool) {
    return number & flag != 0;
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import '@openzeppelin/contracts/token/ERC20/IERC20.sol';
import '@openzeppelin/contracts/token/ERC20/extensions/draft-IERC20Permit.sol';
import '../libraries/RevertReasonParser.sol';
/*
“Copyright (c) 2019-2021 1inch 
Permission is hereby granted, free of charge, to any person obtaining a copy of this software
and associated documentation files (the "Software"), to deal in the Software without restriction,
including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so,
subject to the following conditions: 
The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Software. 
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO
THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE”.
*/
contract Permitable {
  event Error(string reason);
  function _permit(
    IERC20 token,
    uint256 amount,
    bytes memory permit
  ) internal {
    if (permit.length == 32 * 7) {
      // solhint-disable-next-line avoid-low-level-calls
      (bool success, bytes memory result) = address(token).call(
        abi.encodePacked(IERC20Permit.permit.selector, permit)
      );
      if (!success) {
        string memory reason = RevertReasonParser.parse(result, 'Permit call failed: ');
        if (token.allowance(msg.sender, address(this)) < amount) {
          revert(reason);
        } else {
          emit Error(reason);
        }
      }
    }
  }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.12;
interface IAggregationExecutor {
  function callBytes(bytes calldata data) external payable; // 0xd9c45357
  // callbytes per swap sequence
  function swapSingleSequence(bytes calldata data) external;
  function finalTransactionProcessing(
    address tokenIn,
    address tokenOut,
    address to,
    bytes calldata destTokenFeeData
  ) external;
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.9;
import '@openzeppelin/contracts/interfaces/IERC20.sol';
interface IAggregationExecutor1Inch {
  function callBytes(address msgSender, bytes calldata data) external payable; // 0x2636f7f8
}
interface IAggregationRouter1InchV4 {
  function swap(
    IAggregationExecutor1Inch caller,
    SwapDescription1Inch calldata desc,
    bytes calldata data
  ) external payable returns (uint256 returnAmount, uint256 gasLeft);
}
struct SwapDescription1Inch {
  IERC20 srcToken;
  IERC20 dstToken;
  address payable srcReceiver;
  address payable dstReceiver;
  uint256 amount;
  uint256 minReturnAmount;
  uint256 flags;
  bytes permit;
}
struct SwapDescriptionExecutor1Inch {
  IERC20 srcToken;
  IERC20 dstToken;
  address payable srcReceiver1Inch;
  address payable dstReceiver;
  address[] srcReceivers;
  uint256[] srcAmounts;
  uint256 amount;
  uint256 minReturnAmount;
  uint256 flags;
  bytes permit;
}
// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity >=0.7.6;
/*
“Copyright (c) 2019-2021 1inch 
Permission is hereby granted, free of charge, to any person obtaining a copy of this software
and associated documentation files (the "Software"), to deal in the Software without restriction,
including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so,
subject to the following conditions: 
The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Software. 
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO
THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE”.
*/
library RevertReasonParser {
  function parse(bytes memory data, string memory prefix) internal pure returns (string memory) {
    // https://solidity.readthedocs.io/en/latest/control-structures.html#revert
    // We assume that revert reason is abi-encoded as Error(string)
    // 68 = 4-byte selector 0x08c379a0 + 32 bytes offset + 32 bytes length
    if (data.length >= 68 && data[0] == '\\x08' && data[1] == '\\xc3' && data[2] == '\\x79' && data[3] == '\\xa0') {
      string memory reason;
      // solhint-disable no-inline-assembly
      assembly {
        // 68 = 32 bytes data length + 4-byte selector + 32 bytes offset
        reason := add(data, 68)
      }
      /*
                revert reason is padded up to 32 bytes with ABI encoder: Error(string)
                also sometimes there is extra 32 bytes of zeros padded in the end:
                https://github.com/ethereum/solidity/issues/10170
                because of that we can't check for equality and instead check
                that string length + extra 68 bytes is less than overall data length
            */
      require(data.length >= 68 + bytes(reason).length, 'Invalid revert reason');
      return string(abi.encodePacked(prefix, 'Error(', reason, ')'));
    }
    // 36 = 4-byte selector 0x4e487b71 + 32 bytes integer
    else if (data.length == 36 && data[0] == '\\x4e' && data[1] == '\\x48' && data[2] == '\\x7b' && data[3] == '\\x71') {
      uint256 code;
      // solhint-disable no-inline-assembly
      assembly {
        // 36 = 32 bytes data length + 4-byte selector
        code := mload(add(data, 36))
      }
      return string(abi.encodePacked(prefix, 'Panic(', _toHex(code), ')'));
    }
    return string(abi.encodePacked(prefix, 'Unknown(', _toHex(data), ')'));
  }
  function _toHex(uint256 value) private pure returns (string memory) {
    return _toHex(abi.encodePacked(value));
  }
  function _toHex(bytes memory data) private pure returns (string memory) {
    bytes16 alphabet = 0x30313233343536373839616263646566;
    bytes memory str = new bytes(2 + data.length * 2);
    str[0] = '0';
    str[1] = 'x';
    for (uint256 i = 0; i < data.length; i++) {
      str[2 * i + 2] = alphabet[uint8(data[i] >> 4)];
      str[2 * i + 3] = alphabet[uint8(data[i] & 0x0f)];
    }
    return string(str);
  }
}
// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity >=0.5.16;
// helper methods for interacting with ERC20 tokens and sending ETH that do not consistently return true/false
library TransferHelper {
  function safeApprove(
    address token,
    address to,
    uint256 value
  ) internal {
    // bytes4(keccak256(bytes('approve(address,uint256)')));
    (bool success, bytes memory data) = token.call(abi.encodeWithSelector(0x095ea7b3, to, value));
    require(success && (data.length == 0 || abi.decode(data, (bool))), 'TransferHelper: APPROVE_FAILED');
  }
  function safeTransfer(
    address token,
    address to,
    uint256 value
  ) internal {
    // bytes4(keccak256(bytes('transfer(address,uint256)')));
    if (value == 0) return;
    (bool success, bytes memory data) = token.call(abi.encodeWithSelector(0xa9059cbb, to, value));
    require(success && (data.length == 0 || abi.decode(data, (bool))), 'TransferHelper: TRANSFER_FAILED');
  }
  function safeTransferFrom(
    address token,
    address from,
    address to,
    uint256 value
  ) internal {
    // bytes4(keccak256(bytes('transferFrom(address,address,uint256)')));
    if (value == 0) return;
    (bool success, bytes memory data) = token.call(abi.encodeWithSelector(0x23b872dd, from, to, value));
    require(success && (data.length == 0 || abi.decode(data, (bool))), 'TransferHelper: TRANSFER_FROM_FAILED');
  }
  function safeTransferETH(address to, uint256 value) internal {
    if (value == 0) return;
    (bool success, ) = to.call{value: value}(new bytes(0));
    require(success, 'TransferHelper: ETH_TRANSFER_FAILED');
  }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (interfaces/IERC20.sol)
pragma solidity ^0.8.0;
import "../token/ERC20/IERC20.sol";
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;
    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);
    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../../../utils/Address.sol";
/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;
    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }
    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }
    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }
    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }
    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.
        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.
        return account.code.length > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { EIP712Domain } from "./EIP712Domain.sol"; // solhint-disable-line no-unused-import
import { Blacklistable } from "../v1/Blacklistable.sol"; // solhint-disable-line no-unused-import
import { FiatTokenV1 } from "../v1/FiatTokenV1.sol"; // solhint-disable-line no-unused-import
import { FiatTokenV2 } from "./FiatTokenV2.sol"; // solhint-disable-line no-unused-import
import { FiatTokenV2_1 } from "./FiatTokenV2_1.sol";
import { EIP712 } from "../util/EIP712.sol";
// solhint-disable func-name-mixedcase
/**
 * @title FiatToken V2.2
 * @notice ERC20 Token backed by fiat reserves, version 2.2
 */
contract FiatTokenV2_2 is FiatTokenV2_1 {
    /**
     * @notice Initialize v2.2
     * @param accountsToBlacklist   A list of accounts to migrate from the old blacklist
     * @param newSymbol             New token symbol
     * data structure to the new blacklist data structure.
     */
    function initializeV2_2(
        address[] calldata accountsToBlacklist,
        string calldata newSymbol
    ) external {
        // solhint-disable-next-line reason-string
        require(_initializedVersion == 2);
        // Update fiat token symbol
        symbol = newSymbol;
        // Add previously blacklisted accounts to the new blacklist data structure
        // and remove them from the old blacklist data structure.
        for (uint256 i = 0; i < accountsToBlacklist.length; i++) {
            require(
                _deprecatedBlacklisted[accountsToBlacklist[i]],
                "FiatTokenV2_2: Blacklisting previously unblacklisted account!"
            );
            _blacklist(accountsToBlacklist[i]);
            delete _deprecatedBlacklisted[accountsToBlacklist[i]];
        }
        _blacklist(address(this));
        delete _deprecatedBlacklisted[address(this)];
        _initializedVersion = 3;
    }
    /**
     * @dev Internal function to get the current chain id.
     * @return The current chain id.
     */
    function _chainId() internal virtual view returns (uint256) {
        uint256 chainId;
        assembly {
            chainId := chainid()
        }
        return chainId;
    }
    /**
     * @inheritdoc EIP712Domain
     */
    function _domainSeparator() internal override view returns (bytes32) {
        return EIP712.makeDomainSeparator(name, "2", _chainId());
    }
    /**
     * @notice Update allowance with a signed permit
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param owner       Token owner's address (Authorizer)
     * @param spender     Spender's address
     * @param value       Amount of allowance
     * @param deadline    The time at which the signature expires (unix time), or max uint256 value to signal no expiration
     * @param signature   Signature bytes signed by an EOA wallet or a contract wallet
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        bytes memory signature
    ) external whenNotPaused {
        _permit(owner, spender, value, deadline, signature);
    }
    /**
     * @notice Execute a transfer with a signed authorization
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param signature     Signature bytes signed by an EOA wallet or a contract wallet
     */
    function transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        bytes memory signature
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _transferWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            signature
        );
    }
    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * EOA wallet signatures should be packed in the order of r, s, v.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param signature     Signature bytes signed by an EOA wallet or a contract wallet
     */
    function receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        bytes memory signature
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _receiveWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            signature
        );
    }
    /**
     * @notice Attempt to cancel an authorization
     * @dev Works only if the authorization is not yet used.
     * EOA wallet signatures should be packed in the order of r, s, v.
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param signature     Signature bytes signed by an EOA wallet or a contract wallet
     */
    function cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        bytes memory signature
    ) external whenNotPaused {
        _cancelAuthorization(authorizer, nonce, signature);
    }
    /**
     * @dev Helper method that sets the blacklist state of an account on balanceAndBlacklistStates.
     * If _shouldBlacklist is true, we apply a (1 << 255) bitmask with an OR operation on the
     * account's balanceAndBlacklistState. This flips the high bit for the account to 1,
     * indicating that the account is blacklisted.
     *
     * If _shouldBlacklist if false, we reset the account's balanceAndBlacklistStates to their
     * balances. This clears the high bit for the account, indicating that the account is unblacklisted.
     * @param _account         The address of the account.
     * @param _shouldBlacklist True if the account should be blacklisted, false if the account should be unblacklisted.
     */
    function _setBlacklistState(address _account, bool _shouldBlacklist)
        internal
        override
    {
        balanceAndBlacklistStates[_account] = _shouldBlacklist
            ? balanceAndBlacklistStates[_account] | (1 << 255)
            : _balanceOf(_account);
    }
    /**
     * @dev Helper method that sets the balance of an account on balanceAndBlacklistStates.
     * Since balances are stored in the last 255 bits of the balanceAndBlacklistStates value,
     * we need to ensure that the updated balance does not exceed (2^255 - 1).
     * Since blacklisted accounts' balances cannot be updated, the method will also
     * revert if the account is blacklisted
     * @param _account The address of the account.
     * @param _balance The new fiat token balance of the account (max: (2^255 - 1)).
     */
    function _setBalance(address _account, uint256 _balance) internal override {
        require(
            _balance <= ((1 << 255) - 1),
            "FiatTokenV2_2: Balance exceeds (2^255 - 1)"
        );
        require(
            !_isBlacklisted(_account),
            "FiatTokenV2_2: Account is blacklisted"
        );
        balanceAndBlacklistStates[_account] = _balance;
    }
    /**
     * @inheritdoc Blacklistable
     */
    function _isBlacklisted(address _account)
        internal
        override
        view
        returns (bool)
    {
        return balanceAndBlacklistStates[_account] >> 255 == 1;
    }
    /**
     * @dev Helper method to obtain the balance of an account. Since balances
     * are stored in the last 255 bits of the balanceAndBlacklistStates value,
     * we apply a ((1 << 255) - 1) bit bitmask with an AND operation on the
     * balanceAndBlacklistState to obtain the balance.
     * @param _account  The address of the account.
     * @return          The fiat token balance of the account.
     */
    function _balanceOf(address _account)
        internal
        override
        view
        returns (uint256)
    {
        return balanceAndBlacklistStates[_account] & ((1 << 255) - 1);
    }
    /**
     * @inheritdoc FiatTokenV1
     */
    function approve(address spender, uint256 value)
        external
        override
        whenNotPaused
        returns (bool)
    {
        _approve(msg.sender, spender, value);
        return true;
    }
    /**
     * @inheritdoc FiatTokenV2
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external override whenNotPaused {
        _permit(owner, spender, value, deadline, v, r, s);
    }
    /**
     * @inheritdoc FiatTokenV2
     */
    function increaseAllowance(address spender, uint256 increment)
        external
        override
        whenNotPaused
        returns (bool)
    {
        _increaseAllowance(msg.sender, spender, increment);
        return true;
    }
    /**
     * @inheritdoc FiatTokenV2
     */
    function decreaseAllowance(address spender, uint256 decrement)
        external
        override
        whenNotPaused
        returns (bool)
    {
        _decreaseAllowance(msg.sender, spender, decrement);
        return true;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2 <0.8.0;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.
        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";
/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }
    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.
        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }
    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }
    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }
    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }
    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { FiatTokenV2 } from "./FiatTokenV2.sol";
// solhint-disable func-name-mixedcase
/**
 * @title FiatToken V2.1
 * @notice ERC20 Token backed by fiat reserves, version 2.1
 */
contract FiatTokenV2_1 is FiatTokenV2 {
    /**
     * @notice Initialize v2.1
     * @param lostAndFound  The address to which the locked funds are sent
     */
    function initializeV2_1(address lostAndFound) external {
        // solhint-disable-next-line reason-string
        require(_initializedVersion == 1);
        uint256 lockedAmount = _balanceOf(address(this));
        if (lockedAmount > 0) {
            _transfer(address(this), lostAndFound, lockedAmount);
        }
        _blacklist(address(this));
        _initializedVersion = 2;
    }
    /**
     * @notice Version string for the EIP712 domain separator
     * @return Version string
     */
    function version() external pure returns (string memory) {
        return "2";
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { FiatTokenV1_1 } from "../v1.1/FiatTokenV1_1.sol";
import { EIP712 } from "../util/EIP712.sol";
import { EIP3009 } from "./EIP3009.sol";
import { EIP2612 } from "./EIP2612.sol";
/**
 * @title FiatToken V2
 * @notice ERC20 Token backed by fiat reserves, version 2
 */
contract FiatTokenV2 is FiatTokenV1_1, EIP3009, EIP2612 {
    uint8 internal _initializedVersion;
    /**
     * @notice Initialize v2
     * @param newName   New token name
     */
    function initializeV2(string calldata newName) external {
        // solhint-disable-next-line reason-string
        require(initialized && _initializedVersion == 0);
        name = newName;
        _DEPRECATED_CACHED_DOMAIN_SEPARATOR = EIP712.makeDomainSeparator(
            newName,
            "2"
        );
        _initializedVersion = 1;
    }
    /**
     * @notice Increase the allowance by a given increment
     * @param spender   Spender's address
     * @param increment Amount of increase in allowance
     * @return True if successful
     */
    function increaseAllowance(address spender, uint256 increment)
        external
        virtual
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(spender)
        returns (bool)
    {
        _increaseAllowance(msg.sender, spender, increment);
        return true;
    }
    /**
     * @notice Decrease the allowance by a given decrement
     * @param spender   Spender's address
     * @param decrement Amount of decrease in allowance
     * @return True if successful
     */
    function decreaseAllowance(address spender, uint256 decrement)
        external
        virtual
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(spender)
        returns (bool)
    {
        _decreaseAllowance(msg.sender, spender, decrement);
        return true;
    }
    /**
     * @notice Execute a transfer with a signed authorization
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _transferWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            v,
            r,
            s
        );
    }
    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _receiveWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            v,
            r,
            s
        );
    }
    /**
     * @notice Attempt to cancel an authorization
     * @dev Works only if the authorization is not yet used.
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external whenNotPaused {
        _cancelAuthorization(authorizer, nonce, v, r, s);
    }
    /**
     * @notice Update allowance with a signed permit
     * @param owner       Token owner's address (Authorizer)
     * @param spender     Spender's address
     * @param value       Amount of allowance
     * @param deadline    The time at which the signature expires (unix time), or max uint256 value to signal no expiration
     * @param v           v of the signature
     * @param r           r of the signature
     * @param s           s of the signature
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    )
        external
        virtual
        whenNotPaused
        notBlacklisted(owner)
        notBlacklisted(spender)
    {
        _permit(owner, spender, value, deadline, v, r, s);
    }
    /**
     * @dev Internal function to increase the allowance by a given increment
     * @param owner     Token owner's address
     * @param spender   Spender's address
     * @param increment Amount of increase
     */
    function _increaseAllowance(
        address owner,
        address spender,
        uint256 increment
    ) internal override {
        _approve(owner, spender, allowed[owner][spender].add(increment));
    }
    /**
     * @dev Internal function to decrease the allowance by a given decrement
     * @param owner     Token owner's address
     * @param spender   Spender's address
     * @param decrement Amount of decrease
     */
    function _decreaseAllowance(
        address owner,
        address spender,
        uint256 decrement
    ) internal override {
        _approve(
            owner,
            spender,
            allowed[owner][spender].sub(
                decrement,
                "ERC20: decreased allowance below zero"
            )
        );
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
// solhint-disable func-name-mixedcase
/**
 * @title EIP712 Domain
 */
contract EIP712Domain {
    // was originally DOMAIN_SEPARATOR
    // but that has been moved to a method so we can override it in V2_2+
    bytes32 internal _DEPRECATED_CACHED_DOMAIN_SEPARATOR;
    /**
     * @notice Get the EIP712 Domain Separator.
     * @return The bytes32 EIP712 domain separator.
     */
    function DOMAIN_SEPARATOR() external view returns (bytes32) {
        return _domainSeparator();
    }
    /**
     * @dev Internal method to get the EIP712 Domain Separator.
     * @return The bytes32 EIP712 domain separator.
     */
    function _domainSeparator() internal virtual view returns (bytes32) {
        return _DEPRECATED_CACHED_DOMAIN_SEPARATOR;
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { AbstractFiatTokenV2 } from "./AbstractFiatTokenV2.sol";
import { EIP712Domain } from "./EIP712Domain.sol";
import { SignatureChecker } from "../util/SignatureChecker.sol";
import { MessageHashUtils } from "../util/MessageHashUtils.sol";
/**
 * @title EIP-3009
 * @notice Provide internal implementation for gas-abstracted transfers
 * @dev Contracts that inherit from this must wrap these with publicly
 * accessible functions, optionally adding modifiers where necessary
 */
abstract contract EIP3009 is AbstractFiatTokenV2, EIP712Domain {
    // keccak256("TransferWithAuthorization(address from,address to,uint256 value,uint256 validAfter,uint256 validBefore,bytes32 nonce)")
    bytes32
        public constant TRANSFER_WITH_AUTHORIZATION_TYPEHASH = 0x7c7c6cdb67a18743f49ec6fa9b35f50d52ed05cbed4cc592e13b44501c1a2267;
    // keccak256("ReceiveWithAuthorization(address from,address to,uint256 value,uint256 validAfter,uint256 validBefore,bytes32 nonce)")
    bytes32
        public constant RECEIVE_WITH_AUTHORIZATION_TYPEHASH = 0xd099cc98ef71107a616c4f0f941f04c322d8e254fe26b3c6668db87aae413de8;
    // keccak256("CancelAuthorization(address authorizer,bytes32 nonce)")
    bytes32
        public constant CANCEL_AUTHORIZATION_TYPEHASH = 0x158b0a9edf7a828aad02f63cd515c68ef2f50ba807396f6d12842833a1597429;
    /**
     * @dev authorizer address => nonce => bool (true if nonce is used)
     */
    mapping(address => mapping(bytes32 => bool)) private _authorizationStates;
    event AuthorizationUsed(address indexed authorizer, bytes32 indexed nonce);
    event AuthorizationCanceled(
        address indexed authorizer,
        bytes32 indexed nonce
    );
    /**
     * @notice Returns the state of an authorization
     * @dev Nonces are randomly generated 32-byte data unique to the
     * authorizer's address
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @return True if the nonce is used
     */
    function authorizationState(address authorizer, bytes32 nonce)
        external
        view
        returns (bool)
    {
        return _authorizationStates[authorizer][nonce];
    }
    /**
     * @notice Execute a transfer with a signed authorization
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function _transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _transferWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            abi.encodePacked(r, s, v)
        );
    }
    /**
     * @notice Execute a transfer with a signed authorization
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param signature     Signature byte array produced by an EOA wallet or a contract wallet
     */
    function _transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        bytes memory signature
    ) internal {
        _requireValidAuthorization(from, nonce, validAfter, validBefore);
        _requireValidSignature(
            from,
            keccak256(
                abi.encode(
                    TRANSFER_WITH_AUTHORIZATION_TYPEHASH,
                    from,
                    to,
                    value,
                    validAfter,
                    validBefore,
                    nonce
                )
            ),
            signature
        );
        _markAuthorizationAsUsed(from, nonce);
        _transfer(from, to, value);
    }
    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function _receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _receiveWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            abi.encodePacked(r, s, v)
        );
    }
    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * EOA wallet signatures should be packed in the order of r, s, v.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param signature     Signature byte array produced by an EOA wallet or a contract wallet
     */
    function _receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        bytes memory signature
    ) internal {
        require(to == msg.sender, "FiatTokenV2: caller must be the payee");
        _requireValidAuthorization(from, nonce, validAfter, validBefore);
        _requireValidSignature(
            from,
            keccak256(
                abi.encode(
                    RECEIVE_WITH_AUTHORIZATION_TYPEHASH,
                    from,
                    to,
                    value,
                    validAfter,
                    validBefore,
                    nonce
                )
            ),
            signature
        );
        _markAuthorizationAsUsed(from, nonce);
        _transfer(from, to, value);
    }
    /**
     * @notice Attempt to cancel an authorization
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function _cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _cancelAuthorization(authorizer, nonce, abi.encodePacked(r, s, v));
    }
    /**
     * @notice Attempt to cancel an authorization
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param signature     Signature byte array produced by an EOA wallet or a contract wallet
     */
    function _cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        bytes memory signature
    ) internal {
        _requireUnusedAuthorization(authorizer, nonce);
        _requireValidSignature(
            authorizer,
            keccak256(
                abi.encode(CANCEL_AUTHORIZATION_TYPEHASH, authorizer, nonce)
            ),
            signature
        );
        _authorizationStates[authorizer][nonce] = true;
        emit AuthorizationCanceled(authorizer, nonce);
    }
    /**
     * @notice Validates that signature against input data struct
     * @param signer        Signer's address
     * @param dataHash      Hash of encoded data struct
     * @param signature     Signature byte array produced by an EOA wallet or a contract wallet
     */
    function _requireValidSignature(
        address signer,
        bytes32 dataHash,
        bytes memory signature
    ) private view {
        require(
            SignatureChecker.isValidSignatureNow(
                signer,
                MessageHashUtils.toTypedDataHash(_domainSeparator(), dataHash),
                signature
            ),
            "FiatTokenV2: invalid signature"
        );
    }
    /**
     * @notice Check that an authorization is unused
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     */
    function _requireUnusedAuthorization(address authorizer, bytes32 nonce)
        private
        view
    {
        require(
            !_authorizationStates[authorizer][nonce],
            "FiatTokenV2: authorization is used or canceled"
        );
    }
    /**
     * @notice Check that authorization is valid
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     */
    function _requireValidAuthorization(
        address authorizer,
        bytes32 nonce,
        uint256 validAfter,
        uint256 validBefore
    ) private view {
        require(
            now > validAfter,
            "FiatTokenV2: authorization is not yet valid"
        );
        require(now < validBefore, "FiatTokenV2: authorization is expired");
        _requireUnusedAuthorization(authorizer, nonce);
    }
    /**
     * @notice Mark an authorization as used
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     */
    function _markAuthorizationAsUsed(address authorizer, bytes32 nonce)
        private
    {
        _authorizationStates[authorizer][nonce] = true;
        emit AuthorizationUsed(authorizer, nonce);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { AbstractFiatTokenV2 } from "./AbstractFiatTokenV2.sol";
import { EIP712Domain } from "./EIP712Domain.sol";
import { MessageHashUtils } from "../util/MessageHashUtils.sol";
import { SignatureChecker } from "../util/SignatureChecker.sol";
/**
 * @title EIP-2612
 * @notice Provide internal implementation for gas-abstracted approvals
 */
abstract contract EIP2612 is AbstractFiatTokenV2, EIP712Domain {
    // keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)")
    bytes32
        public constant PERMIT_TYPEHASH = 0x6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9;
    mapping(address => uint256) private _permitNonces;
    /**
     * @notice Nonces for permit
     * @param owner Token owner's address (Authorizer)
     * @return Next nonce
     */
    function nonces(address owner) external view returns (uint256) {
        return _permitNonces[owner];
    }
    /**
     * @notice Verify a signed approval permit and execute if valid
     * @param owner     Token owner's address (Authorizer)
     * @param spender   Spender's address
     * @param value     Amount of allowance
     * @param deadline  The time at which the signature expires (unix time), or max uint256 value to signal no expiration
     * @param v         v of the signature
     * @param r         r of the signature
     * @param s         s of the signature
     */
    function _permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _permit(owner, spender, value, deadline, abi.encodePacked(r, s, v));
    }
    /**
     * @notice Verify a signed approval permit and execute if valid
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param owner      Token owner's address (Authorizer)
     * @param spender    Spender's address
     * @param value      Amount of allowance
     * @param deadline   The time at which the signature expires (unix time), or max uint256 value to signal no expiration
     * @param signature  Signature byte array signed by an EOA wallet or a contract wallet
     */
    function _permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        bytes memory signature
    ) internal {
        require(
            deadline == type(uint256).max || deadline >= now,
            "FiatTokenV2: permit is expired"
        );
        bytes32 typedDataHash = MessageHashUtils.toTypedDataHash(
            _domainSeparator(),
            keccak256(
                abi.encode(
                    PERMIT_TYPEHASH,
                    owner,
                    spender,
                    value,
                    _permitNonces[owner]++,
                    deadline
                )
            )
        );
        require(
            SignatureChecker.isValidSignatureNow(
                owner,
                typedDataHash,
                signature
            ),
            "EIP2612: invalid signature"
        );
        _approve(owner, spender, value);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { AbstractFiatTokenV1 } from "../v1/AbstractFiatTokenV1.sol";
abstract contract AbstractFiatTokenV2 is AbstractFiatTokenV1 {
    function _increaseAllowance(
        address owner,
        address spender,
        uint256 increment
    ) internal virtual;
    function _decreaseAllowance(
        address owner,
        address spender,
        uint256 decrement
    ) internal virtual;
}
/**
 * SPDX-License-Identifier: MIT
 *
 * Copyright (c) 2016 Smart Contract Solutions, Inc.
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */
pragma solidity 0.6.12;
import { Ownable } from "./Ownable.sol";
/**
 * @notice Base contract which allows children to implement an emergency stop
 * mechanism
 * @dev Forked from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/feb665136c0dae9912e08397c1a21c4af3651ef3/contracts/lifecycle/Pausable.sol
 * Modifications:
 * 1. Added pauser role, switched pause/unpause to be onlyPauser (6/14/2018)
 * 2. Removed whenNotPause/whenPaused from pause/unpause (6/14/2018)
 * 3. Removed whenPaused (6/14/2018)
 * 4. Switches ownable library to use ZeppelinOS (7/12/18)
 * 5. Remove constructor (7/13/18)
 * 6. Reformat, conform to Solidity 0.6 syntax and add error messages (5/13/20)
 * 7. Make public functions external (5/27/20)
 */
contract Pausable is Ownable {
    event Pause();
    event Unpause();
    event PauserChanged(address indexed newAddress);
    address public pauser;
    bool public paused = false;
    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     */
    modifier whenNotPaused() {
        require(!paused, "Pausable: paused");
        _;
    }
    /**
     * @dev throws if called by any account other than the pauser
     */
    modifier onlyPauser() {
        require(msg.sender == pauser, "Pausable: caller is not the pauser");
        _;
    }
    /**
     * @dev called by the owner to pause, triggers stopped state
     */
    function pause() external onlyPauser {
        paused = true;
        emit Pause();
    }
    /**
     * @dev called by the owner to unpause, returns to normal state
     */
    function unpause() external onlyPauser {
        paused = false;
        emit Unpause();
    }
    /**
     * @notice Updates the pauser address.
     * @param _newPauser The address of the new pauser.
     */
    function updatePauser(address _newPauser) external onlyOwner {
        require(
            _newPauser != address(0),
            "Pausable: new pauser is the zero address"
        );
        pauser = _newPauser;
        emit PauserChanged(pauser);
    }
}
/**
 * SPDX-License-Identifier: MIT
 *
 * Copyright (c) 2018 zOS Global Limited.
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */
pragma solidity 0.6.12;
/**
 * @notice The Ownable contract has an owner address, and provides basic
 * authorization control functions
 * @dev Forked from https://github.com/OpenZeppelin/openzeppelin-labs/blob/3887ab77b8adafba4a26ace002f3a684c1a3388b/upgradeability_ownership/contracts/ownership/Ownable.sol
 * Modifications:
 * 1. Consolidate OwnableStorage into this contract (7/13/18)
 * 2. Reformat, conform to Solidity 0.6 syntax, and add error messages (5/13/20)
 * 3. Make public functions external (5/27/20)
 */
contract Ownable {
    // Owner of the contract
    address private _owner;
    /**
     * @dev Event to show ownership has been transferred
     * @param previousOwner representing the address of the previous owner
     * @param newOwner representing the address of the new owner
     */
    event OwnershipTransferred(address previousOwner, address newOwner);
    /**
     * @dev The constructor sets the original owner of the contract to the sender account.
     */
    constructor() public {
        setOwner(msg.sender);
    }
    /**
     * @dev Tells the address of the owner
     * @return the address of the owner
     */
    function owner() external view returns (address) {
        return _owner;
    }
    /**
     * @dev Sets a new owner address
     */
    function setOwner(address newOwner) internal {
        _owner = newOwner;
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(msg.sender == _owner, "Ownable: caller is not the owner");
        _;
    }
    /**
     * @dev Allows the current owner to transfer control of the contract to a newOwner.
     * @param newOwner The address to transfer ownership to.
     */
    function transferOwnership(address newOwner) external onlyOwner {
        require(
            newOwner != address(0),
            "Ownable: new owner is the zero address"
        );
        emit OwnershipTransferred(_owner, newOwner);
        setOwner(newOwner);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";
import { AbstractFiatTokenV1 } from "./AbstractFiatTokenV1.sol";
import { Ownable } from "./Ownable.sol";
import { Pausable } from "./Pausable.sol";
import { Blacklistable } from "./Blacklistable.sol";
/**
 * @title FiatToken
 * @dev ERC20 Token backed by fiat reserves
 */
contract FiatTokenV1 is AbstractFiatTokenV1, Ownable, Pausable, Blacklistable {
    using SafeMath for uint256;
    string public name;
    string public symbol;
    uint8 public decimals;
    string public currency;
    address public masterMinter;
    bool internal initialized;
    /// @dev A mapping that stores the balance and blacklist states for a given address.
    /// The first bit defines whether the address is blacklisted (1 if blacklisted, 0 otherwise).
    /// The last 255 bits define the balance for the address.
    mapping(address => uint256) internal balanceAndBlacklistStates;
    mapping(address => mapping(address => uint256)) internal allowed;
    uint256 internal totalSupply_ = 0;
    mapping(address => bool) internal minters;
    mapping(address => uint256) internal minterAllowed;
    event Mint(address indexed minter, address indexed to, uint256 amount);
    event Burn(address indexed burner, uint256 amount);
    event MinterConfigured(address indexed minter, uint256 minterAllowedAmount);
    event MinterRemoved(address indexed oldMinter);
    event MasterMinterChanged(address indexed newMasterMinter);
    /**
     * @notice Initializes the fiat token contract.
     * @param tokenName       The name of the fiat token.
     * @param tokenSymbol     The symbol of the fiat token.
     * @param tokenCurrency   The fiat currency that the token represents.
     * @param tokenDecimals   The number of decimals that the token uses.
     * @param newMasterMinter The masterMinter address for the fiat token.
     * @param newPauser       The pauser address for the fiat token.
     * @param newBlacklister  The blacklister address for the fiat token.
     * @param newOwner        The owner of the fiat token.
     */
    function initialize(
        string memory tokenName,
        string memory tokenSymbol,
        string memory tokenCurrency,
        uint8 tokenDecimals,
        address newMasterMinter,
        address newPauser,
        address newBlacklister,
        address newOwner
    ) public {
        require(!initialized, "FiatToken: contract is already initialized");
        require(
            newMasterMinter != address(0),
            "FiatToken: new masterMinter is the zero address"
        );
        require(
            newPauser != address(0),
            "FiatToken: new pauser is the zero address"
        );
        require(
            newBlacklister != address(0),
            "FiatToken: new blacklister is the zero address"
        );
        require(
            newOwner != address(0),
            "FiatToken: new owner is the zero address"
        );
        name = tokenName;
        symbol = tokenSymbol;
        currency = tokenCurrency;
        decimals = tokenDecimals;
        masterMinter = newMasterMinter;
        pauser = newPauser;
        blacklister = newBlacklister;
        setOwner(newOwner);
        initialized = true;
    }
    /**
     * @dev Throws if called by any account other than a minter.
     */
    modifier onlyMinters() {
        require(minters[msg.sender], "FiatToken: caller is not a minter");
        _;
    }
    /**
     * @notice Mints fiat tokens to an address.
     * @param _to The address that will receive the minted tokens.
     * @param _amount The amount of tokens to mint. Must be less than or equal
     * to the minterAllowance of the caller.
     * @return True if the operation was successful.
     */
    function mint(address _to, uint256 _amount)
        external
        whenNotPaused
        onlyMinters
        notBlacklisted(msg.sender)
        notBlacklisted(_to)
        returns (bool)
    {
        require(_to != address(0), "FiatToken: mint to the zero address");
        require(_amount > 0, "FiatToken: mint amount not greater than 0");
        uint256 mintingAllowedAmount = minterAllowed[msg.sender];
        require(
            _amount <= mintingAllowedAmount,
            "FiatToken: mint amount exceeds minterAllowance"
        );
        totalSupply_ = totalSupply_.add(_amount);
        _setBalance(_to, _balanceOf(_to).add(_amount));
        minterAllowed[msg.sender] = mintingAllowedAmount.sub(_amount);
        emit Mint(msg.sender, _to, _amount);
        emit Transfer(address(0), _to, _amount);
        return true;
    }
    /**
     * @dev Throws if called by any account other than the masterMinter
     */
    modifier onlyMasterMinter() {
        require(
            msg.sender == masterMinter,
            "FiatToken: caller is not the masterMinter"
        );
        _;
    }
    /**
     * @notice Gets the minter allowance for an account.
     * @param minter The address to check.
     * @return The remaining minter allowance for the account.
     */
    function minterAllowance(address minter) external view returns (uint256) {
        return minterAllowed[minter];
    }
    /**
     * @notice Checks if an account is a minter.
     * @param account The address to check.
     * @return True if the account is a minter, false if the account is not a minter.
     */
    function isMinter(address account) external view returns (bool) {
        return minters[account];
    }
    /**
     * @notice Gets the remaining amount of fiat tokens a spender is allowed to transfer on
     * behalf of the token owner.
     * @param owner   The token owner's address.
     * @param spender The spender's address.
     * @return The remaining allowance.
     */
    function allowance(address owner, address spender)
        external
        override
        view
        returns (uint256)
    {
        return allowed[owner][spender];
    }
    /**
     * @notice Gets the totalSupply of the fiat token.
     * @return The totalSupply of the fiat token.
     */
    function totalSupply() external override view returns (uint256) {
        return totalSupply_;
    }
    /**
     * @notice Gets the fiat token balance of an account.
     * @param account  The address to check.
     * @return balance The fiat token balance of the account.
     */
    function balanceOf(address account)
        external
        override
        view
        returns (uint256)
    {
        return _balanceOf(account);
    }
    /**
     * @notice Sets a fiat token allowance for a spender to spend on behalf of the caller.
     * @param spender The spender's address.
     * @param value   The allowance amount.
     * @return True if the operation was successful.
     */
    function approve(address spender, uint256 value)
        external
        virtual
        override
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(spender)
        returns (bool)
    {
        _approve(msg.sender, spender, value);
        return true;
    }
    /**
     * @dev Internal function to set allowance.
     * @param owner     Token owner's address.
     * @param spender   Spender's address.
     * @param value     Allowance amount.
     */
    function _approve(
        address owner,
        address spender,
        uint256 value
    ) internal override {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");
        allowed[owner][spender] = value;
        emit Approval(owner, spender, value);
    }
    /**
     * @notice Transfers tokens from an address to another by spending the caller's allowance.
     * @dev The caller must have some fiat token allowance on the payer's tokens.
     * @param from  Payer's address.
     * @param to    Payee's address.
     * @param value Transfer amount.
     * @return True if the operation was successful.
     */
    function transferFrom(
        address from,
        address to,
        uint256 value
    )
        external
        override
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(from)
        notBlacklisted(to)
        returns (bool)
    {
        require(
            value <= allowed[from][msg.sender],
            "ERC20: transfer amount exceeds allowance"
        );
        _transfer(from, to, value);
        allowed[from][msg.sender] = allowed[from][msg.sender].sub(value);
        return true;
    }
    /**
     * @notice Transfers tokens from the caller.
     * @param to    Payee's address.
     * @param value Transfer amount.
     * @return True if the operation was successful.
     */
    function transfer(address to, uint256 value)
        external
        override
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(to)
        returns (bool)
    {
        _transfer(msg.sender, to, value);
        return true;
    }
    /**
     * @dev Internal function to process transfers.
     * @param from  Payer's address.
     * @param to    Payee's address.
     * @param value Transfer amount.
     */
    function _transfer(
        address from,
        address to,
        uint256 value
    ) internal override {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");
        require(
            value <= _balanceOf(from),
            "ERC20: transfer amount exceeds balance"
        );
        _setBalance(from, _balanceOf(from).sub(value));
        _setBalance(to, _balanceOf(to).add(value));
        emit Transfer(from, to, value);
    }
    /**
     * @notice Adds or updates a new minter with a mint allowance.
     * @param minter The address of the minter.
     * @param minterAllowedAmount The minting amount allowed for the minter.
     * @return True if the operation was successful.
     */
    function configureMinter(address minter, uint256 minterAllowedAmount)
        external
        whenNotPaused
        onlyMasterMinter
        returns (bool)
    {
        minters[minter] = true;
        minterAllowed[minter] = minterAllowedAmount;
        emit MinterConfigured(minter, minterAllowedAmount);
        return true;
    }
    /**
     * @notice Removes a minter.
     * @param minter The address of the minter to remove.
     * @return True if the operation was successful.
     */
    function removeMinter(address minter)
        external
        onlyMasterMinter
        returns (bool)
    {
        minters[minter] = false;
        minterAllowed[minter] = 0;
        emit MinterRemoved(minter);
        return true;
    }
    /**
     * @notice Allows a minter to burn some of its own tokens.
     * @dev The caller must be a minter, must not be blacklisted, and the amount to burn
     * should be less than or equal to the account's balance.
     * @param _amount the amount of tokens to be burned.
     */
    function burn(uint256 _amount)
        external
        whenNotPaused
        onlyMinters
        notBlacklisted(msg.sender)
    {
        uint256 balance = _balanceOf(msg.sender);
        require(_amount > 0, "FiatToken: burn amount not greater than 0");
        require(balance >= _amount, "FiatToken: burn amount exceeds balance");
        totalSupply_ = totalSupply_.sub(_amount);
        _setBalance(msg.sender, balance.sub(_amount));
        emit Burn(msg.sender, _amount);
        emit Transfer(msg.sender, address(0), _amount);
    }
    /**
     * @notice Updates the master minter address.
     * @param _newMasterMinter The address of the new master minter.
     */
    function updateMasterMinter(address _newMasterMinter) external onlyOwner {
        require(
            _newMasterMinter != address(0),
            "FiatToken: new masterMinter is the zero address"
        );
        masterMinter = _newMasterMinter;
        emit MasterMinterChanged(masterMinter);
    }
    /**
     * @inheritdoc Blacklistable
     */
    function _blacklist(address _account) internal override {
        _setBlacklistState(_account, true);
    }
    /**
     * @inheritdoc Blacklistable
     */
    function _unBlacklist(address _account) internal override {
        _setBlacklistState(_account, false);
    }
    /**
     * @dev Helper method that sets the blacklist state of an account.
     * @param _account         The address of the account.
     * @param _shouldBlacklist True if the account should be blacklisted, false if the account should be unblacklisted.
     */
    function _setBlacklistState(address _account, bool _shouldBlacklist)
        internal
        virtual
    {
        _deprecatedBlacklisted[_account] = _shouldBlacklist;
    }
    /**
     * @dev Helper method that sets the balance of an account.
     * @param _account The address of the account.
     * @param _balance The new fiat token balance of the account.
     */
    function _setBalance(address _account, uint256 _balance) internal virtual {
        balanceAndBlacklistStates[_account] = _balance;
    }
    /**
     * @inheritdoc Blacklistable
     */
    function _isBlacklisted(address _account)
        internal
        virtual
        override
        view
        returns (bool)
    {
        return _deprecatedBlacklisted[_account];
    }
    /**
     * @dev Helper method to obtain the balance of an account.
     * @param _account  The address of the account.
     * @return          The fiat token balance of the account.
     */
    function _balanceOf(address _account)
        internal
        virtual
        view
        returns (uint256)
    {
        return balanceAndBlacklistStates[_account];
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { Ownable } from "./Ownable.sol";
/**
 * @title Blacklistable Token
 * @dev Allows accounts to be blacklisted by a "blacklister" role
 */
abstract contract Blacklistable is Ownable {
    address public blacklister;
    mapping(address => bool) internal _deprecatedBlacklisted;
    event Blacklisted(address indexed _account);
    event UnBlacklisted(address indexed _account);
    event BlacklisterChanged(address indexed newBlacklister);
    /**
     * @dev Throws if called by any account other than the blacklister.
     */
    modifier onlyBlacklister() {
        require(
            msg.sender == blacklister,
            "Blacklistable: caller is not the blacklister"
        );
        _;
    }
    /**
     * @dev Throws if argument account is blacklisted.
     * @param _account The address to check.
     */
    modifier notBlacklisted(address _account) {
        require(
            !_isBlacklisted(_account),
            "Blacklistable: account is blacklisted"
        );
        _;
    }
    /**
     * @notice Checks if account is blacklisted.
     * @param _account The address to check.
     * @return True if the account is blacklisted, false if the account is not blacklisted.
     */
    function isBlacklisted(address _account) external view returns (bool) {
        return _isBlacklisted(_account);
    }
    /**
     * @notice Adds account to blacklist.
     * @param _account The address to blacklist.
     */
    function blacklist(address _account) external onlyBlacklister {
        _blacklist(_account);
        emit Blacklisted(_account);
    }
    /**
     * @notice Removes account from blacklist.
     * @param _account The address to remove from the blacklist.
     */
    function unBlacklist(address _account) external onlyBlacklister {
        _unBlacklist(_account);
        emit UnBlacklisted(_account);
    }
    /**
     * @notice Updates the blacklister address.
     * @param _newBlacklister The address of the new blacklister.
     */
    function updateBlacklister(address _newBlacklister) external onlyOwner {
        require(
            _newBlacklister != address(0),
            "Blacklistable: new blacklister is the zero address"
        );
        blacklister = _newBlacklister;
        emit BlacklisterChanged(blacklister);
    }
    /**
     * @dev Checks if account is blacklisted.
     * @param _account The address to check.
     * @return true if the account is blacklisted, false otherwise.
     */
    function _isBlacklisted(address _account)
        internal
        virtual
        view
        returns (bool);
    /**
     * @dev Helper method that blacklists an account.
     * @param _account The address to blacklist.
     */
    function _blacklist(address _account) internal virtual;
    /**
     * @dev Helper method that unblacklists an account.
     * @param _account The address to unblacklist.
     */
    function _unBlacklist(address _account) internal virtual;
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
abstract contract AbstractFiatTokenV1 is IERC20 {
    function _approve(
        address owner,
        address spender,
        uint256 value
    ) internal virtual;
    function _transfer(
        address from,
        address to,
        uint256 value
    ) internal virtual;
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { Ownable } from "../v1/Ownable.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
contract Rescuable is Ownable {
    using SafeERC20 for IERC20;
    address private _rescuer;
    event RescuerChanged(address indexed newRescuer);
    /**
     * @notice Returns current rescuer
     * @return Rescuer's address
     */
    function rescuer() external view returns (address) {
        return _rescuer;
    }
    /**
     * @notice Revert if called by any account other than the rescuer.
     */
    modifier onlyRescuer() {
        require(msg.sender == _rescuer, "Rescuable: caller is not the rescuer");
        _;
    }
    /**
     * @notice Rescue ERC20 tokens locked up in this contract.
     * @param tokenContract ERC20 token contract address
     * @param to        Recipient address
     * @param amount    Amount to withdraw
     */
    function rescueERC20(
        IERC20 tokenContract,
        address to,
        uint256 amount
    ) external onlyRescuer {
        tokenContract.safeTransfer(to, amount);
    }
    /**
     * @notice Updates the rescuer address.
     * @param newRescuer The address of the new rescuer.
     */
    function updateRescuer(address newRescuer) external onlyOwner {
        require(
            newRescuer != address(0),
            "Rescuable: new rescuer is the zero address"
        );
        _rescuer = newRescuer;
        emit RescuerChanged(newRescuer);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { FiatTokenV1 } from "../v1/FiatTokenV1.sol";
import { Rescuable } from "./Rescuable.sol";
/**
 * @title FiatTokenV1_1
 * @dev ERC20 Token backed by fiat reserves
 */
contract FiatTokenV1_1 is FiatTokenV1, Rescuable {
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { ECRecover } from "./ECRecover.sol";
import { IERC1271 } from "../interface/IERC1271.sol";
/**
 * @dev Signature verification helper that can be used instead of `ECRecover.recover` to seamlessly support both ECDSA
 * signatures from externally owned accounts (EOAs) as well as ERC1271 signatures from smart contract wallets.
 *
 * Adapted from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/21bb89ef5bfc789b9333eb05e3ba2b7b284ac77c/contracts/utils/cryptography/SignatureChecker.sol
 */
library SignatureChecker {
    /**
     * @dev Checks if a signature is valid for a given signer and data hash. If the signer is a smart contract, the
     * signature is validated against that smart contract using ERC1271, otherwise it's validated using `ECRecover.recover`.
     * @param signer        Address of the claimed signer
     * @param digest        Keccak-256 hash digest of the signed message
     * @param signature     Signature byte array associated with hash
     */
    function isValidSignatureNow(
        address signer,
        bytes32 digest,
        bytes memory signature
    ) external view returns (bool) {
        if (!isContract(signer)) {
            return ECRecover.recover(digest, signature) == signer;
        }
        return isValidERC1271SignatureNow(signer, digest, signature);
    }
    /**
     * @dev Checks if a signature is valid for a given signer and data hash. The signature is validated
     * against the signer smart contract using ERC1271.
     * @param signer        Address of the claimed signer
     * @param digest        Keccak-256 hash digest of the signed message
     * @param signature     Signature byte array associated with hash
     *
     * NOTE: Unlike ECDSA signatures, contract signatures are revocable, and the outcome of this function can thus
     * change through time. It could return true at block N and false at block N+1 (or the opposite).
     */
    function isValidERC1271SignatureNow(
        address signer,
        bytes32 digest,
        bytes memory signature
    ) internal view returns (bool) {
        (bool success, bytes memory result) = signer.staticcall(
            abi.encodeWithSelector(
                IERC1271.isValidSignature.selector,
                digest,
                signature
            )
        );
        return (success &&
            result.length >= 32 &&
            abi.decode(result, (bytes32)) ==
            bytes32(IERC1271.isValidSignature.selector));
    }
    /**
     * @dev Checks if the input address is a smart contract.
     */
    function isContract(address addr) internal view returns (bool) {
        uint256 size;
        assembly {
            size := extcodesize(addr)
        }
        return size > 0;
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
/**
 * @dev Signature message hash utilities for producing digests to be consumed by {ECDSA} recovery or signing.
 *
 * The library provides methods for generating a hash of a message that conforms to the
 * https://eips.ethereum.org/EIPS/eip-191[EIP 191] and https://eips.ethereum.org/EIPS/eip-712[EIP 712]
 * specifications.
 */
library MessageHashUtils {
    /**
     * @dev Returns the keccak256 digest of an EIP-712 typed data (EIP-191 version `0x01`).
     * Adapted from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/21bb89ef5bfc789b9333eb05e3ba2b7b284ac77c/contracts/utils/cryptography/MessageHashUtils.sol
     *
     * The digest is calculated from a `domainSeparator` and a `structHash`, by prefixing them with
     * `\\x19\\x01` and hashing the result. It corresponds to the hash signed by the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`] JSON-RPC method as part of EIP-712.
     *
     * @param domainSeparator    Domain separator
     * @param structHash         Hashed EIP-712 data struct
     * @return digest            The keccak256 digest of an EIP-712 typed data
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash)
        internal
        pure
        returns (bytes32 digest)
    {
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, "\\x19\\x01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            digest := keccak256(ptr, 0x42)
        }
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
/**
 * @title EIP712
 * @notice A library that provides EIP712 helper functions
 */
library EIP712 {
    /**
     * @notice Make EIP712 domain separator
     * @param name      Contract name
     * @param version   Contract version
     * @param chainId   Blockchain ID
     * @return Domain separator
     */
    function makeDomainSeparator(
        string memory name,
        string memory version,
        uint256 chainId
    ) internal view returns (bytes32) {
        return
            keccak256(
                abi.encode(
                    // keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)")
                    0x8b73c3c69bb8fe3d512ecc4cf759cc79239f7b179b0ffacaa9a75d522b39400f,
                    keccak256(bytes(name)),
                    keccak256(bytes(version)),
                    chainId,
                    address(this)
                )
            );
    }
    /**
     * @notice Make EIP712 domain separator
     * @param name      Contract name
     * @param version   Contract version
     * @return Domain separator
     */
    function makeDomainSeparator(string memory name, string memory version)
        internal
        view
        returns (bytes32)
    {
        uint256 chainId;
        assembly {
            chainId := chainid()
        }
        return makeDomainSeparator(name, version, chainId);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
/**
 * @title ECRecover
 * @notice A library that provides a safe ECDSA recovery function
 */
library ECRecover {
    /**
     * @notice Recover signer's address from a signed message
     * @dev Adapted from: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/65e4ffde586ec89af3b7e9140bdc9235d1254853/contracts/cryptography/ECDSA.sol
     * Modifications: Accept v, r, and s as separate arguments
     * @param digest    Keccak-256 hash digest of the signed message
     * @param v         v of the signature
     * @param r         r of the signature
     * @param s         s of the signature
     * @return Signer address
     */
    function recover(
        bytes32 digest,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (281): 0 < s < secp256k1n ÷ 2 + 1, and for v in (282): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (
            uint256(s) >
            0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0
        ) {
            revert("ECRecover: invalid signature 's' value");
        }
        if (v != 27 && v != 28) {
            revert("ECRecover: invalid signature 'v' value");
        }
        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(digest, v, r, s);
        require(signer != address(0), "ECRecover: invalid signature");
        return signer;
    }
    /**
     * @notice Recover signer's address from a signed message
     * @dev Adapted from: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/0053ee040a7ff1dbc39691c9e67a69f564930a88/contracts/utils/cryptography/ECDSA.sol
     * @param digest    Keccak-256 hash digest of the signed message
     * @param signature Signature byte array associated with hash
     * @return Signer address
     */
    function recover(bytes32 digest, bytes memory signature)
        internal
        pure
        returns (address)
    {
        require(signature.length == 65, "ECRecover: invalid signature length");
        bytes32 r;
        bytes32 s;
        uint8 v;
        // ecrecover takes the signature parameters, and the only way to get them
        // currently is to use assembly.
        /// @solidity memory-safe-assembly
        assembly {
            r := mload(add(signature, 0x20))
            s := mload(add(signature, 0x40))
            v := byte(0, mload(add(signature, 0x60)))
        }
        return recover(digest, v, r, s);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
/**
 * @dev Interface of the ERC1271 standard signature validation method for
 * contracts as defined in https://eips.ethereum.org/EIPS/eip-1271[ERC-1271].
 */
interface IERC1271 {
    /**
     * @dev Should return whether the signature provided is valid for the provided data
     * @param hash          Hash of the data to be signed
     * @param signature     Signature byte array associated with the provided data hash
     * @return magicValue   bytes4 magic value 0x1626ba7e when function passes
     */
    function isValidSignature(bytes32 hash, bytes memory signature)
        external
        view
        returns (bytes4 magicValue);
}