// SPDX-License-Identifier: GPL-3.0
/// @title The Nouns DAO auction house proxy
/*********************************
 * ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ *
 * ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ *
 * ░░░░░░█████████░░█████████░░░ *
 * ░░░░░░██░░░████░░██░░░████░░░ *
 * ░░██████░░░████████░░░████░░░ *
 * ░░██░░██░░░████░░██░░░████░░░ *
 * ░░██░░██░░░████░░██░░░████░░░ *
 * ░░░░░░█████████░░█████████░░░ *
 * ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ *
 * ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ *
 *********************************/
pragma solidity ^0.8.6;
import { TransparentUpgradeableProxy } from '@openzeppelin/contracts/proxy/transparent/TransparentUpgradeableProxy.sol';
contract NounsAuctionHouseProxy is TransparentUpgradeableProxy {
    constructor(
        address logic,
        address admin,
        bytes memory data
    ) TransparentUpgradeableProxy(logic, admin, data) {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (proxy/transparent/TransparentUpgradeableProxy.sol)
pragma solidity ^0.8.0;
import "../ERC1967/ERC1967Proxy.sol";
/**
 * @dev This contract implements a proxy that is upgradeable by an admin.
 *
 * To avoid https://medium.com/nomic-labs-blog/malicious-backdoors-in-ethereum-proxies-62629adf3357[proxy selector
 * clashing], which can potentially be used in an attack, this contract uses the
 * https://blog.openzeppelin.com/the-transparent-proxy-pattern/[transparent proxy pattern]. This pattern implies two
 * things that go hand in hand:
 *
 * 1. If any account other than the admin calls the proxy, the call will be forwarded to the implementation, even if
 * that call matches one of the admin functions exposed by the proxy itself.
 * 2. If the admin calls the proxy, it can access the admin functions, but its calls will never be forwarded to the
 * implementation. If the admin tries to call a function on the implementation it will fail with an error that says
 * "admin cannot fallback to proxy target".
 *
 * These properties mean that the admin account can only be used for admin actions like upgrading the proxy or changing
 * the admin, so it's best if it's a dedicated account that is not used for anything else. This will avoid headaches due
 * to sudden errors when trying to call a function from the proxy implementation.
 *
 * Our recommendation is for the dedicated account to be an instance of the {ProxyAdmin} contract. If set up this way,
 * you should think of the `ProxyAdmin` instance as the real administrative interface of your proxy.
 */
contract TransparentUpgradeableProxy is ERC1967Proxy {
    /**
     * @dev Initializes an upgradeable proxy managed by `_admin`, backed by the implementation at `_logic`, and
     * optionally initialized with `_data` as explained in {ERC1967Proxy-constructor}.
     */
    constructor(
        address _logic,
        address admin_,
        bytes memory _data
    ) payable ERC1967Proxy(_logic, _data) {
        assert(_ADMIN_SLOT == bytes32(uint256(keccak256("eip1967.proxy.admin")) - 1));
        _changeAdmin(admin_);
    }
    /**
     * @dev Modifier used internally that will delegate the call to the implementation unless the sender is the admin.
     */
    modifier ifAdmin() {
        if (msg.sender == _getAdmin()) {
            _;
        } else {
            _fallback();
        }
    }
    /**
     * @dev Returns the current admin.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyAdmin}.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`
     */
    function admin() external ifAdmin returns (address admin_) {
        admin_ = _getAdmin();
    }
    /**
     * @dev Returns the current implementation.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyImplementation}.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc`
     */
    function implementation() external ifAdmin returns (address implementation_) {
        implementation_ = _implementation();
    }
    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {AdminChanged} event.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-changeProxyAdmin}.
     */
    function changeAdmin(address newAdmin) external virtual ifAdmin {
        _changeAdmin(newAdmin);
    }
    /**
     * @dev Upgrade the implementation of the proxy.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgrade}.
     */
    function upgradeTo(address newImplementation) external ifAdmin {
        _upgradeToAndCall(newImplementation, bytes(""), false);
    }
    /**
     * @dev Upgrade the implementation of the proxy, and then call a function from the new implementation as specified
     * by `data`, which should be an encoded function call. This is useful to initialize new storage variables in the
     * proxied contract.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgradeAndCall}.
     */
    function upgradeToAndCall(address newImplementation, bytes calldata data) external payable ifAdmin {
        _upgradeToAndCall(newImplementation, data, true);
    }
    /**
     * @dev Returns the current admin.
     */
    function _admin() internal view virtual returns (address) {
        return _getAdmin();
    }
    /**
     * @dev Makes sure the admin cannot access the fallback function. See {Proxy-_beforeFallback}.
     */
    function _beforeFallback() internal virtual override {
        require(msg.sender != _getAdmin(), "TransparentUpgradeableProxy: admin cannot fallback to proxy target");
        super._beforeFallback();
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (proxy/ERC1967/ERC1967Proxy.sol)
pragma solidity ^0.8.0;
import "../Proxy.sol";
import "./ERC1967Upgrade.sol";
/**
 * @dev This contract implements an upgradeable proxy. It is upgradeable because calls are delegated to an
 * implementation address that can be changed. This address is stored in storage in the location specified by
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967], so that it doesn't conflict with the storage layout of the
 * implementation behind the proxy.
 */
contract ERC1967Proxy is Proxy, ERC1967Upgrade {
    /**
     * @dev Initializes the upgradeable proxy with an initial implementation specified by `_logic`.
     *
     * If `_data` is nonempty, it's used as data in a delegate call to `_logic`. This will typically be an encoded
     * function call, and allows initializating the storage of the proxy like a Solidity constructor.
     */
    constructor(address _logic, bytes memory _data) payable {
        assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
        _upgradeToAndCall(_logic, _data, false);
    }
    /**
     * @dev Returns the current implementation address.
     */
    function _implementation() internal view virtual override returns (address impl) {
        return ERC1967Upgrade._getImplementation();
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
 * @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
 * instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
 * be specified by overriding the virtual {_implementation} function.
 *
 * Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
 * different contract through the {_delegate} function.
 *
 * The success and return data of the delegated call will be returned back to the caller of the proxy.
 */
abstract contract Proxy {
    /**
     * @dev Delegates the current call to `implementation`.
     *
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _delegate(address implementation) internal virtual {
        assembly {
            // Copy msg.data. We take full control of memory in this inline assembly
            // block because it will not return to Solidity code. We overwrite the
            // Solidity scratch pad at memory position 0.
            calldatacopy(0, 0, calldatasize())
            // Call the implementation.
            // out and outsize are 0 because we don't know the size yet.
            let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
            // Copy the returned data.
            returndatacopy(0, 0, returndatasize())
            switch result
            // delegatecall returns 0 on error.
            case 0 {
                revert(0, returndatasize())
            }
            default {
                return(0, returndatasize())
            }
        }
    }
    /**
     * @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
     * and {_fallback} should delegate.
     */
    function _implementation() internal view virtual returns (address);
    /**
     * @dev Delegates the current call to the address returned by `_implementation()`.
     *
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _fallback() internal virtual {
        _beforeFallback();
        _delegate(_implementation());
    }
    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
     * function in the contract matches the call data.
     */
    fallback() external payable virtual {
        _fallback();
    }
    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
     * is empty.
     */
    receive() external payable virtual {
        _fallback();
    }
    /**
     * @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
     * call, or as part of the Solidity `fallback` or `receive` functions.
     *
     * If overriden should call `super._beforeFallback()`.
     */
    function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (proxy/ERC1967/ERC1967Upgrade.sol)
pragma solidity ^0.8.2;
import "../beacon/IBeacon.sol";
import "../../utils/Address.sol";
import "../../utils/StorageSlot.sol";
/**
 * @dev This abstract contract provides getters and event emitting update functions for
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967] slots.
 *
 * _Available since v4.1._
 *
 * @custom:oz-upgrades-unsafe-allow delegatecall
 */
abstract contract ERC1967Upgrade {
    // This is the keccak-256 hash of "eip1967.proxy.rollback" subtracted by 1
    bytes32 private constant _ROLLBACK_SLOT = 0x4910fdfa16fed3260ed0e7147f7cc6da11a60208b5b9406d12a635614ffd9143;
    /**
     * @dev Storage slot with the address of the current implementation.
     * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
    /**
     * @dev Emitted when the implementation is upgraded.
     */
    event Upgraded(address indexed implementation);
    /**
     * @dev Returns the current implementation address.
     */
    function _getImplementation() internal view returns (address) {
        return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
    }
    /**
     * @dev Stores a new address in the EIP1967 implementation slot.
     */
    function _setImplementation(address newImplementation) private {
        require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
        StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
    }
    /**
     * @dev Perform implementation upgrade
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeTo(address newImplementation) internal {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
    }
    /**
     * @dev Perform implementation upgrade with additional setup call.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeToAndCall(
        address newImplementation,
        bytes memory data,
        bool forceCall
    ) internal {
        _upgradeTo(newImplementation);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(newImplementation, data);
        }
    }
    /**
     * @dev Perform implementation upgrade with security checks for UUPS proxies, and additional setup call.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeToAndCallSecure(
        address newImplementation,
        bytes memory data,
        bool forceCall
    ) internal {
        address oldImplementation = _getImplementation();
        // Initial upgrade and setup call
        _setImplementation(newImplementation);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(newImplementation, data);
        }
        // Perform rollback test if not already in progress
        StorageSlot.BooleanSlot storage rollbackTesting = StorageSlot.getBooleanSlot(_ROLLBACK_SLOT);
        if (!rollbackTesting.value) {
            // Trigger rollback using upgradeTo from the new implementation
            rollbackTesting.value = true;
            Address.functionDelegateCall(
                newImplementation,
                abi.encodeWithSignature("upgradeTo(address)", oldImplementation)
            );
            rollbackTesting.value = false;
            // Check rollback was effective
            require(oldImplementation == _getImplementation(), "ERC1967Upgrade: upgrade breaks further upgrades");
            // Finally reset to the new implementation and log the upgrade
            _upgradeTo(newImplementation);
        }
    }
    /**
     * @dev Storage slot with the admin of the contract.
     * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 internal constant _ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
    /**
     * @dev Emitted when the admin account has changed.
     */
    event AdminChanged(address previousAdmin, address newAdmin);
    /**
     * @dev Returns the current admin.
     */
    function _getAdmin() internal view returns (address) {
        return StorageSlot.getAddressSlot(_ADMIN_SLOT).value;
    }
    /**
     * @dev Stores a new address in the EIP1967 admin slot.
     */
    function _setAdmin(address newAdmin) private {
        require(newAdmin != address(0), "ERC1967: new admin is the zero address");
        StorageSlot.getAddressSlot(_ADMIN_SLOT).value = newAdmin;
    }
    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {AdminChanged} event.
     */
    function _changeAdmin(address newAdmin) internal {
        emit AdminChanged(_getAdmin(), newAdmin);
        _setAdmin(newAdmin);
    }
    /**
     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.
     * This is bytes32(uint256(keccak256('eip1967.proxy.beacon')) - 1)) and is validated in the constructor.
     */
    bytes32 internal constant _BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;
    /**
     * @dev Emitted when the beacon is upgraded.
     */
    event BeaconUpgraded(address indexed beacon);
    /**
     * @dev Returns the current beacon.
     */
    function _getBeacon() internal view returns (address) {
        return StorageSlot.getAddressSlot(_BEACON_SLOT).value;
    }
    /**
     * @dev Stores a new beacon in the EIP1967 beacon slot.
     */
    function _setBeacon(address newBeacon) private {
        require(Address.isContract(newBeacon), "ERC1967: new beacon is not a contract");
        require(
            Address.isContract(IBeacon(newBeacon).implementation()),
            "ERC1967: beacon implementation is not a contract"
        );
        StorageSlot.getAddressSlot(_BEACON_SLOT).value = newBeacon;
    }
    /**
     * @dev Perform beacon upgrade with additional setup call. Note: This upgrades the address of the beacon, it does
     * not upgrade the implementation contained in the beacon (see {UpgradeableBeacon-_setImplementation} for that).
     *
     * Emits a {BeaconUpgraded} event.
     */
    function _upgradeBeaconToAndCall(
        address newBeacon,
        bytes memory data,
        bool forceCall
    ) internal {
        _setBeacon(newBeacon);
        emit BeaconUpgraded(newBeacon);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (proxy/beacon/IBeacon.sol)
pragma solidity ^0.8.0;
/**
 * @dev This is the interface that {BeaconProxy} expects of its beacon.
 */
interface IBeacon {
    /**
     * @dev Must return an address that can be used as a delegate call target.
     *
     * {BeaconProxy} will check that this address is a contract.
     */
    function implementation() external view returns (address);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.
        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 *
 * _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }
    struct BooleanSlot {
        bool value;
    }
    struct Bytes32Slot {
        bytes32 value;
    }
    struct Uint256Slot {
        uint256 value;
    }
    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        assembly {
            r.slot := slot
        }
    }
}

// SPDX-License-Identifier: GPL-3.0
/// @title The Lil Nouns DAO auction house
/*********************************
 * ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ *
 * ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ *
 * ░░░░░░█████████░░█████████░░░ *
 * ░░░░░░██░░░████░░██░░░████░░░ *
 * ░░██████░░░████████░░░████░░░ *
 * ░░██░░██░░░████░░██░░░████░░░ *
 * ░░██░░██░░░████░░██░░░████░░░ *
 * ░░░░░░█████████░░█████████░░░ *
 * ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ *
 * ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ *
 *********************************/
// LICENSE
// NounsAuctionHouse.sol is a modified version of Zora's AuctionHouse.sol:
// https://github.com/ourzora/auction-house/blob/54a12ec1a6cf562e49f0a4917990474b11350a2d/contracts/AuctionHouse.sol
//
// AuctionHouse.sol source code Copyright Zora licensed under the GPL-3.0 license.
// With modifications by Nounders DAO.
pragma solidity ^0.8.6;
import { PausableUpgradeable } from '@openzeppelin/contracts-upgradeable/security/PausableUpgradeable.sol';
import { ReentrancyGuardUpgradeable } from '@openzeppelin/contracts-upgradeable/security/ReentrancyGuardUpgradeable.sol';
import { OwnableUpgradeable } from '@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol';
import { IERC20 } from '@openzeppelin/contracts/token/ERC20/IERC20.sol';
import { INounsAuctionHouse } from './interfaces/INounsAuctionHouse.sol';
import { INounsToken } from './interfaces/INounsToken.sol';
import { IWETH } from './interfaces/IWETH.sol';
contract NounsAuctionHouse is INounsAuctionHouse, PausableUpgradeable, ReentrancyGuardUpgradeable, OwnableUpgradeable {
    // The Nouns ERC721 token contract
    INounsToken public nouns;
    // The address of the WETH contract
    address public weth;
    // The minimum amount of time left in an auction after a new bid is created
    uint256 public timeBuffer;
    // The minimum price accepted in an auction
    uint256 public reservePrice;
    // The minimum percentage difference between the last bid amount and the current bid
    uint8 public minBidIncrementPercentage;
    // The duration of a single auction
    uint256 public duration;
    // The active auction
    INounsAuctionHouse.Auction public auction;
    /**
     * @notice Initialize the auction house and base contracts,
     * populate configuration values, and pause the contract.
     * @dev This function can only be called once.
     */
    function initialize(
        INounsToken _nouns,
        address _weth,
        uint256 _timeBuffer,
        uint256 _reservePrice,
        uint8 _minBidIncrementPercentage,
        uint256 _duration
    ) external initializer {
        __Pausable_init();
        __ReentrancyGuard_init();
        __Ownable_init();
        _pause();
        nouns = _nouns;
        weth = _weth;
        timeBuffer = _timeBuffer;
        reservePrice = _reservePrice;
        minBidIncrementPercentage = _minBidIncrementPercentage;
        duration = _duration;
    }
    /**
     * @notice Settle the current auction, mint a new Noun, and put it up for auction.
     */
    function settleCurrentAndCreateNewAuction() external override nonReentrant whenNotPaused {
        _settleAuction();
        _createAuction();
    }
    /**
     * @notice Settle the current auction.
     * @dev This function can only be called when the contract is paused.
     */
    function settleAuction() external override whenPaused nonReentrant {
        _settleAuction();
    }
    /**
     * @notice Create a bid for a Noun, with a given amount.
     * @dev This contract only accepts payment in ETH.
     */
    function createBid(uint256 nounId) external payable override nonReentrant {
        INounsAuctionHouse.Auction memory _auction = auction;
        require(_auction.nounId == nounId, 'Lil Noun not up for auction');
        require(block.timestamp < _auction.endTime, 'Auction expired');
        require(msg.value >= reservePrice, 'Must send at least reservePrice');
        require(
            msg.value >= _auction.amount + ((_auction.amount * minBidIncrementPercentage) / 100),
            'Must send more than last bid by minBidIncrementPercentage amount'
        );
        address payable lastBidder = _auction.bidder;
        // Refund the last bidder, if applicable
        if (lastBidder != address(0)) {
            _safeTransferETHWithFallback(lastBidder, _auction.amount);
        }
        auction.amount = msg.value;
        auction.bidder = payable(msg.sender);
        // Extend the auction if the bid was received within `timeBuffer` of the auction end time
        bool extended = _auction.endTime - block.timestamp < timeBuffer;
        if (extended) {
            auction.endTime = _auction.endTime = block.timestamp + timeBuffer;
        }
        emit AuctionBid(_auction.nounId, msg.sender, msg.value, extended);
        if (extended) {
            emit AuctionExtended(_auction.nounId, _auction.endTime);
        }
    }
    /**
     * @notice Pause the Nouns auction house.
     * @dev This function can only be called by the owner when the
     * contract is unpaused. While no new auctions can be started when paused,
     * anyone can settle an ongoing auction.
     */
    function pause() external override onlyOwner {
        _pause();
    }
    /**
     * @notice Unpause the Nouns auction house.
     * @dev This function can only be called by the owner when the
     * contract is paused. If required, this function will start a new auction.
     */
    function unpause() external override onlyOwner {
        _unpause();
        if (auction.startTime == 0 || auction.settled) {
            _createAuction();
        }
    }
    /**
     * @notice Set the auction time buffer.
     * @dev Only callable by the owner.
     */
    function setTimeBuffer(uint256 _timeBuffer) external override onlyOwner {
        timeBuffer = _timeBuffer;
        emit AuctionTimeBufferUpdated(_timeBuffer);
    }
    /**
     * @notice Set the auction reserve price.
     * @dev Only callable by the owner.
     */
    function setReservePrice(uint256 _reservePrice) external override onlyOwner {
        reservePrice = _reservePrice;
        emit AuctionReservePriceUpdated(_reservePrice);
    }
    /**
     * @notice Set the auction minimum bid increment percentage.
     * @dev Only callable by the owner.
     */
    function setMinBidIncrementPercentage(uint8 _minBidIncrementPercentage) external override onlyOwner {
        minBidIncrementPercentage = _minBidIncrementPercentage;
        emit AuctionMinBidIncrementPercentageUpdated(_minBidIncrementPercentage);
    }
    /**
     * @notice Create an auction.
     * @dev Store the auction details in the `auction` state variable and emit an AuctionCreated event.
     * If the mint reverts, the minter was updated without pausing this contract first. To remedy this,
     * catch the revert and pause this contract.
     */
    function _createAuction() internal {
        try nouns.mint() returns (uint256 nounId) {
            uint256 startTime = block.timestamp;
            uint256 endTime = startTime + duration;
            auction = Auction({
                nounId: nounId,
                amount: 0,
                startTime: startTime,
                endTime: endTime,
                bidder: payable(0),
                settled: false
            });
            emit AuctionCreated(nounId, startTime, endTime);
        } catch Error(string memory) {
            _pause();
        }
    }
    /**
     * @notice Settle an auction, finalizing the bid and paying out to the owner.
     * @dev If there are no bids, the Noun is burned.
     */
    function _settleAuction() internal {
        INounsAuctionHouse.Auction memory _auction = auction;
        require(_auction.startTime != 0, "Auction hasn't begun");
        require(!_auction.settled, 'Auction has already been settled');
        require(block.timestamp >= _auction.endTime, "Auction hasn't completed");
        auction.settled = true;
        if (_auction.bidder == address(0)) {
            nouns.burn(_auction.nounId);
        } else {
            nouns.transferFrom(address(this), _auction.bidder, _auction.nounId);
        }
        if (_auction.amount > 0) {
            _safeTransferETHWithFallback(owner(), _auction.amount);
        }
        emit AuctionSettled(_auction.nounId, _auction.bidder, _auction.amount);
    }
    /**
     * @notice Transfer ETH. If the ETH transfer fails, wrap the ETH and try send it as WETH.
     */
    function _safeTransferETHWithFallback(address to, uint256 amount) internal {
        if (!_safeTransferETH(to, amount)) {
            IWETH(weth).deposit{ value: amount }();
            IERC20(weth).transfer(to, amount);
        }
    }
    /**
     * @notice Transfer ETH and return the success status.
     * @dev This function only forwards 30,000 gas to the callee.
     */
    function _safeTransferETH(address to, uint256 value) internal returns (bool) {
        (bool success, ) = to.call{ value: value, gas: 30_000 }(new bytes(0));
        return success;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (security/Pausable.sol)
pragma solidity ^0.8.0;
import "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";
/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract PausableUpgradeable is Initializable, ContextUpgradeable {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);
    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);
    bool private _paused;
    /**
     * @dev Initializes the contract in unpaused state.
     */
    function __Pausable_init() internal initializer {
        __Context_init_unchained();
        __Pausable_init_unchained();
    }
    function __Pausable_init_unchained() internal initializer {
        _paused = false;
    }
    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }
    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        require(!paused(), "Pausable: paused");
        _;
    }
    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        require(paused(), "Pausable: not paused");
        _;
    }
    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }
    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
    uint256[49] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";
/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuardUpgradeable is Initializable {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.
    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;
    uint256 private _status;
    function __ReentrancyGuard_init() internal initializer {
        __ReentrancyGuard_init_unchained();
    }
    function __ReentrancyGuard_init_unchained() internal initializer {
        _status = _NOT_ENTERED;
    }
    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
        _;
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
    uint256[49] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    function __Ownable_init() internal initializer {
        __Context_init_unchained();
        __Ownable_init_unchained();
    }
    function __Ownable_init_unchained() internal initializer {
        _transferOwnership(_msgSender());
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
    uint256[49] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: GPL-3.0
/// @title Interface for Noun Auction Houses
/*********************************
 * ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ *
 * ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ *
 * ░░░░░░█████████░░█████████░░░ *
 * ░░░░░░██░░░████░░██░░░████░░░ *
 * ░░██████░░░████████░░░████░░░ *
 * ░░██░░██░░░████░░██░░░████░░░ *
 * ░░██░░██░░░████░░██░░░████░░░ *
 * ░░░░░░█████████░░█████████░░░ *
 * ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ *
 * ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ *
 *********************************/
pragma solidity ^0.8.6;
interface INounsAuctionHouse {
    struct Auction {
        // ID for the Noun (ERC721 token ID)
        uint256 nounId;
        // The current highest bid amount
        uint256 amount;
        // The time that the auction started
        uint256 startTime;
        // The time that the auction is scheduled to end
        uint256 endTime;
        // The address of the current highest bid
        address payable bidder;
        // Whether or not the auction has been settled
        bool settled;
    }
    event AuctionCreated(uint256 indexed nounId, uint256 startTime, uint256 endTime);
    event AuctionBid(uint256 indexed nounId, address sender, uint256 value, bool extended);
    event AuctionExtended(uint256 indexed nounId, uint256 endTime);
    event AuctionSettled(uint256 indexed nounId, address winner, uint256 amount);
    event AuctionTimeBufferUpdated(uint256 timeBuffer);
    event AuctionReservePriceUpdated(uint256 reservePrice);
    event AuctionMinBidIncrementPercentageUpdated(uint256 minBidIncrementPercentage);
    function settleAuction() external;
    function settleCurrentAndCreateNewAuction() external;
    function createBid(uint256 nounId) external payable;
    function pause() external;
    function unpause() external;
    function setTimeBuffer(uint256 timeBuffer) external;
    function setReservePrice(uint256 reservePrice) external;
    function setMinBidIncrementPercentage(uint8 minBidIncrementPercentage) external;
}
// SPDX-License-Identifier: GPL-3.0
/// @title Interface for NounsToken
/*********************************
 * ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ *
 * ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ *
 * ░░░░░░█████████░░█████████░░░ *
 * ░░░░░░██░░░████░░██░░░████░░░ *
 * ░░██████░░░████████░░░████░░░ *
 * ░░██░░██░░░████░░██░░░████░░░ *
 * ░░██░░██░░░████░░██░░░████░░░ *
 * ░░░░░░█████████░░█████████░░░ *
 * ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ *
 * ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ *
 *********************************/
pragma solidity ^0.8.6;
import { IERC721 } from '@openzeppelin/contracts/token/ERC721/IERC721.sol';
import { INounsDescriptor } from './INounsDescriptor.sol';
import { INounsSeeder } from './INounsSeeder.sol';
interface INounsToken is IERC721 {
    event NounCreated(uint256 indexed tokenId, INounsSeeder.Seed seed);
    event NounBurned(uint256 indexed tokenId);
    event LilNoundersDAOUpdated(address lilnoundersDAO);
    event NounsDAOUpdated(address nounsDAO);
    event MinterUpdated(address minter);
    event MinterLocked();
    event DescriptorUpdated(INounsDescriptor descriptor);
    event DescriptorLocked();
    event SeederUpdated(INounsSeeder seeder);
    event SeederLocked();
    function mint() external returns (uint256);
    function burn(uint256 tokenId) external;
    function dataURI(uint256 tokenId) external returns (string memory);
    function setLilNoundersDAO(address lilnoundersDAO) external;
    function setNounsDAO(address nounsDAO) external;
    function setMinter(address minter) external;
    function lockMinter() external;
    function setDescriptor(INounsDescriptor descriptor) external;
    function lockDescriptor() external;
    function setSeeder(INounsSeeder seeder) external;
    function lockSeeder() external;
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity ^0.8.6;
interface IWETH {
    function deposit() external payable;
    function withdraw(uint256 wad) external;
    function transfer(address to, uint256 value) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (utils/Context.sol)
pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";
/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal initializer {
        __Context_init_unchained();
    }
    function __Context_init_unchained() internal initializer {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
    uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (proxy/utils/Initializable.sol)
pragma solidity ^0.8.0;
/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since a proxied contract can't have a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To initialize the implementation contract, you can either invoke the
 * initializer manually, or you can include a constructor to automatically mark it as initialized when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() initializer {}
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     */
    bool private _initialized;
    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;
    /**
     * @dev Modifier to protect an initializer function from being invoked twice.
     */
    modifier initializer() {
        require(_initializing || !_initialized, "Initializable: contract is already initialized");
        bool isTopLevelCall = !_initializing;
        if (isTopLevelCall) {
            _initializing = true;
            _initialized = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);
    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);
    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;
    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;
    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;
    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);
    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;
    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);
    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;
}
// SPDX-License-Identifier: GPL-3.0
/// @title Interface for NounsDescriptor
/*********************************
 * ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ *
 * ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ *
 * ░░░░░░█████████░░█████████░░░ *
 * ░░░░░░██░░░████░░██░░░████░░░ *
 * ░░██████░░░████████░░░████░░░ *
 * ░░██░░██░░░████░░██░░░████░░░ *
 * ░░██░░██░░░████░░██░░░████░░░ *
 * ░░░░░░█████████░░█████████░░░ *
 * ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ *
 * ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ *
 *********************************/
pragma solidity ^0.8.6;
import { INounsSeeder } from './INounsSeeder.sol';
interface INounsDescriptor {
    event PartsLocked();
    event DataURIToggled(bool enabled);
    event BaseURIUpdated(string baseURI);
    function arePartsLocked() external returns (bool);
    function isDataURIEnabled() external returns (bool);
    function baseURI() external returns (string memory);
    function palettes(uint8 paletteIndex, uint256 colorIndex) external view returns (string memory);
    function backgrounds(uint256 index) external view returns (string memory);
    function bodies(uint256 index) external view returns (bytes memory);
    function accessories(uint256 index) external view returns (bytes memory);
    function heads(uint256 index) external view returns (bytes memory);
    function glasses(uint256 index) external view returns (bytes memory);
    function backgroundCount() external view returns (uint256);
    function bodyCount() external view returns (uint256);
    function accessoryCount() external view returns (uint256);
    function headCount() external view returns (uint256);
    function glassesCount() external view returns (uint256);
    function addManyColorsToPalette(uint8 paletteIndex, string[] calldata newColors) external;
    function addManyBackgrounds(string[] calldata backgrounds) external;
    function addManyBodies(bytes[] calldata bodies) external;
    function addManyAccessories(bytes[] calldata accessories) external;
    function addManyHeads(bytes[] calldata heads) external;
    function addManyGlasses(bytes[] calldata glasses) external;
    function addColorToPalette(uint8 paletteIndex, string calldata color) external;
    function addBackground(string calldata background) external;
    function addBody(bytes calldata body) external;
    function addAccessory(bytes calldata accessory) external;
    function addHead(bytes calldata head) external;
    function addGlasses(bytes calldata glasses) external;
    function lockParts() external;
    function toggleDataURIEnabled() external;
    function setBaseURI(string calldata baseURI) external;
    function tokenURI(uint256 tokenId, INounsSeeder.Seed memory seed) external view returns (string memory);
    function dataURI(uint256 tokenId, INounsSeeder.Seed memory seed) external view returns (string memory);
    function genericDataURI(
        string calldata name,
        string calldata description,
        INounsSeeder.Seed memory seed
    ) external view returns (string memory);
    function generateSVGImage(INounsSeeder.Seed memory seed) external view returns (string memory);
}
// SPDX-License-Identifier: GPL-3.0
/// @title Interface for NounsSeeder
/*********************************
 * ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ *
 * ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ *
 * ░░░░░░█████████░░█████████░░░ *
 * ░░░░░░██░░░████░░██░░░████░░░ *
 * ░░██████░░░████████░░░████░░░ *
 * ░░██░░██░░░████░░██░░░████░░░ *
 * ░░██░░██░░░████░░██░░░████░░░ *
 * ░░░░░░█████████░░█████████░░░ *
 * ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ *
 * ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ *
 *********************************/
pragma solidity ^0.8.6;
import { INounsDescriptor } from './INounsDescriptor.sol';
interface INounsSeeder {
    struct Seed {
        uint48 background;
        uint48 body;
        uint48 accessory;
        uint48 head;
        uint48 glasses;
    }
    function generateSeed(uint256 nounId, INounsDescriptor descriptor) external view returns (Seed memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}