pragma solidity ^0.6.0;
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
contract CommunityVault is Ownable {
    IERC20 private _bond;
    constructor (address bond) public {
        _bond = IERC20(bond);
    }
    event SetAllowance(address indexed caller, address indexed spender, uint256 amount);
    function setAllowance(address spender, uint amount) public onlyOwner {
        _bond.approve(spender, amount);
        emit SetAllowance(msg.sender, spender, amount);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "../GSN/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/access/Ownable.sol";
interface IStaking {
    function getEpochId(uint timestamp) external view returns (uint); // get epoch id
    function getEpochUserBalance(address user, address token, uint128 epoch) external view returns(uint);
    function getEpochPoolSize(address token, uint128 epoch) external view returns (uint);
    function epoch1Start() external view returns (uint);
    function epochDuration() external view returns (uint);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
contract ERC20Mock is ERC20("ERC20Mock", "MCK") {
    bool public transferFromCalled = false;
    bool public transferCalled = false;
    address public transferRecipient = address(0);
    uint256 public transferAmount = 0;
    function mint(address user, uint256 amount) public {
        _mint(user, amount);
    }
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        transferFromCalled = true;
        return super.transferFrom(sender, recipient, amount);
    }
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        transferCalled = true;
        transferRecipient = recipient;
        transferAmount = amount;
        return super.transfer(recipient, amount);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "../../GSN/Context.sol";
import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";
/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;
    using Address for address;
    mapping (address => uint256) private _balances;
    mapping (address => mapping (address => uint256)) private _allowances;
    uint256 private _totalSupply;
    string private _name;
    string private _symbol;
    uint8 private _decimals;
    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;
        _decimals = 18;
    }
    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }
    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }
    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }
    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }
    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }
    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }
    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }
    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }
    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }
    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }
    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }
    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");
        _beforeTokenTransfer(sender, recipient, amount);
        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }
    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");
        _beforeTokenTransfer(address(0), account, amount);
        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }
    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");
        _beforeTokenTransfer(account, address(0), amount);
        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }
    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
     *
     * This is internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");
        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }
    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }
    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;
        return c;
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }
    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }
    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold
        return c;
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.2;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(account) }
        return (codehash != accountHash && codehash != 0x0);
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        return _functionCallWithValue(target, data, value, errorMessage);
    }
    function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
contract ERC20Mock6Decimals is ERC20("ERC20Mock6decimals", "MCK") {
    bool public transferFromCalled = false;
    bool public transferCalled = false;
    address public transferRecipient = address(0);
    uint256 public transferAmount = 0;
    uint8 private _decimals;
    constructor () public {
        _decimals = 6;
    }
    function mint(address user, uint256 amount) public {
        _mint(user, amount);
    }
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        transferFromCalled = true;
        return super.transferFrom(sender, recipient, amount);
    }
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        transferCalled = true;
        transferRecipient = recipient;
        transferAmount = amount;
        return super.transfer(recipient, amount);
    }
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/utils/ReentrancyGuard.sol";
contract Staking is ReentrancyGuard {
    using SafeMath for uint256;
    uint128 constant private BASE_MULTIPLIER = uint128(1 * 10 ** 18);
    // timestamp for the epoch 1
    // everything before that is considered epoch 0 which won't have a reward but allows for the initial stake
    uint256 public epoch1Start;
    // duration of each epoch
    uint256 public epochDuration;
    // holds the current balance of the user for each token
    mapping(address => mapping(address => uint256)) private balances;
    struct Pool {
        uint256 size;
        bool set;
    }
    // for each token, we store the total pool size
    mapping(address => mapping(uint256 => Pool)) private poolSize;
    // a checkpoint of the valid balance of a user for an epoch
    struct Checkpoint {
        uint128 epochId;
        uint128 multiplier;
        uint256 startBalance;
        uint256 newDeposits;
    }
    // balanceCheckpoints[user][token][]
    mapping(address => mapping(address => Checkpoint[])) private balanceCheckpoints;
    mapping(address => uint128) private lastWithdrawEpochId;
    event Deposit(address indexed user, address indexed tokenAddress, uint256 amount);
    event Withdraw(address indexed user, address indexed tokenAddress, uint256 amount);
    event ManualEpochInit(address indexed caller, uint128 indexed epochId, address[] tokens);
    event EmergencyWithdraw(address indexed user, address indexed tokenAddress, uint256 amount);
    constructor (uint256 _epoch1Start, uint256 _epochDuration) public {
        epoch1Start = _epoch1Start;
        epochDuration = _epochDuration;
    }
    /*
     * Stores `amount` of `tokenAddress` tokens for the `user` into the vault
     */
    function deposit(address tokenAddress, uint256 amount) public nonReentrant {
        require(amount > 0, "Staking: Amount must be > 0");
        IERC20 token = IERC20(tokenAddress);
        uint256 allowance = token.allowance(msg.sender, address(this));
        require(allowance >= amount, "Staking: Token allowance too small");
        balances[msg.sender][tokenAddress] = balances[msg.sender][tokenAddress].add(amount);
        token.transferFrom(msg.sender, address(this), amount);
        // epoch logic
        uint128 currentEpoch = getCurrentEpoch();
        uint128 currentMultiplier = currentEpochMultiplier();
        if (!epochIsInitialized(tokenAddress, currentEpoch)) {
            address[] memory tokens = new address[](1);
            tokens[0] = tokenAddress;
            manualEpochInit(tokens, currentEpoch);
        }
        // update the next epoch pool size
        Pool storage pNextEpoch = poolSize[tokenAddress][currentEpoch + 1];
        pNextEpoch.size = token.balanceOf(address(this));
        pNextEpoch.set = true;
        Checkpoint[] storage checkpoints = balanceCheckpoints[msg.sender][tokenAddress];
        uint256 balanceBefore = getEpochUserBalance(msg.sender, tokenAddress, currentEpoch);
        // if there's no checkpoint yet, it means the user didn't have any activity
        // we want to store checkpoints both for the current epoch and next epoch because
        // if a user does a withdraw, the current epoch can also be modified and
        // we don't want to insert another checkpoint in the middle of the array as that could be expensive
        if (checkpoints.length == 0) {
            checkpoints.push(Checkpoint(currentEpoch, currentMultiplier, 0, amount));
            // next epoch => multiplier is 1, epoch deposits is 0
            checkpoints.push(Checkpoint(currentEpoch + 1, BASE_MULTIPLIER, amount, 0));
        } else {
            uint256 last = checkpoints.length - 1;
            // the last action happened in an older epoch (e.g. a deposit in epoch 3, current epoch is >=5)
            if (checkpoints[last].epochId < currentEpoch) {
                uint128 multiplier = computeNewMultiplier(
                    getCheckpointBalance(checkpoints[last]),
                    BASE_MULTIPLIER,
                    amount,
                    currentMultiplier
                );
                checkpoints.push(Checkpoint(currentEpoch, multiplier, getCheckpointBalance(checkpoints[last]), amount));
                checkpoints.push(Checkpoint(currentEpoch + 1, BASE_MULTIPLIER, balances[msg.sender][tokenAddress], 0));
            }
            // the last action happened in the previous epoch
            else if (checkpoints[last].epochId == currentEpoch) {
                checkpoints[last].multiplier = computeNewMultiplier(
                    getCheckpointBalance(checkpoints[last]),
                    checkpoints[last].multiplier,
                    amount,
                    currentMultiplier
                );
                checkpoints[last].newDeposits = checkpoints[last].newDeposits.add(amount);
                checkpoints.push(Checkpoint(currentEpoch + 1, BASE_MULTIPLIER, balances[msg.sender][tokenAddress], 0));
            }
            // the last action happened in the current epoch
            else {
                if (last >= 1 && checkpoints[last - 1].epochId == currentEpoch) {
                    checkpoints[last - 1].multiplier = computeNewMultiplier(
                        getCheckpointBalance(checkpoints[last - 1]),
                        checkpoints[last - 1].multiplier,
                        amount,
                        currentMultiplier
                    );
                    checkpoints[last - 1].newDeposits = checkpoints[last - 1].newDeposits.add(amount);
                }
                checkpoints[last].startBalance = balances[msg.sender][tokenAddress];
            }
        }
        uint256 balanceAfter = getEpochUserBalance(msg.sender, tokenAddress, currentEpoch);
        poolSize[tokenAddress][currentEpoch].size = poolSize[tokenAddress][currentEpoch].size.add(balanceAfter.sub(balanceBefore));
        emit Deposit(msg.sender, tokenAddress, amount);
    }
    /*
     * Removes the deposit of the user and sends the amount of `tokenAddress` back to the `user`
     */
    function withdraw(address tokenAddress, uint256 amount) public nonReentrant {
        require(balances[msg.sender][tokenAddress] >= amount, "Staking: balance too small");
        balances[msg.sender][tokenAddress] = balances[msg.sender][tokenAddress].sub(amount);
        IERC20 token = IERC20(tokenAddress);
        token.transfer(msg.sender, amount);
        // epoch logic
        uint128 currentEpoch = getCurrentEpoch();
        lastWithdrawEpochId[tokenAddress] = currentEpoch;
        if (!epochIsInitialized(tokenAddress, currentEpoch)) {
            address[] memory tokens = new address[](1);
            tokens[0] = tokenAddress;
            manualEpochInit(tokens, currentEpoch);
        }
        // update the pool size of the next epoch to its current balance
        Pool storage pNextEpoch = poolSize[tokenAddress][currentEpoch + 1];
        pNextEpoch.size = token.balanceOf(address(this));
        pNextEpoch.set = true;
        Checkpoint[] storage checkpoints = balanceCheckpoints[msg.sender][tokenAddress];
        uint256 last = checkpoints.length - 1;
        // note: it's impossible to have a withdraw and no checkpoints because the balance would be 0 and revert
        // there was a deposit in an older epoch (more than 1 behind [eg: previous 0, now 5]) but no other action since then
        if (checkpoints[last].epochId < currentEpoch) {
            checkpoints.push(Checkpoint(currentEpoch, BASE_MULTIPLIER, balances[msg.sender][tokenAddress], 0));
            poolSize[tokenAddress][currentEpoch].size = poolSize[tokenAddress][currentEpoch].size.sub(amount);
        }
        // there was a deposit in the `epochId - 1` epoch => we have a checkpoint for the current epoch
        else if (checkpoints[last].epochId == currentEpoch) {
            checkpoints[last].startBalance = balances[msg.sender][tokenAddress];
            checkpoints[last].newDeposits = 0;
            checkpoints[last].multiplier = BASE_MULTIPLIER;
            poolSize[tokenAddress][currentEpoch].size = poolSize[tokenAddress][currentEpoch].size.sub(amount);
        }
        // there was a deposit in the current epoch
        else {
            Checkpoint storage currentEpochCheckpoint = checkpoints[last - 1];
            uint256 balanceBefore = getCheckpointEffectiveBalance(currentEpochCheckpoint);
            // in case of withdraw, we have 2 branches:
            // 1. the user withdraws less than he added in the current epoch
            // 2. the user withdraws more than he added in the current epoch (including 0)
            if (amount < currentEpochCheckpoint.newDeposits) {
                uint128 avgDepositMultiplier = uint128(
                    balanceBefore.sub(currentEpochCheckpoint.startBalance).mul(BASE_MULTIPLIER).div(currentEpochCheckpoint.newDeposits)
                );
                currentEpochCheckpoint.newDeposits = currentEpochCheckpoint.newDeposits.sub(amount);
                currentEpochCheckpoint.multiplier = computeNewMultiplier(
                    currentEpochCheckpoint.startBalance,
                    BASE_MULTIPLIER,
                    currentEpochCheckpoint.newDeposits,
                    avgDepositMultiplier
                );
            } else {
                currentEpochCheckpoint.startBalance = currentEpochCheckpoint.startBalance.sub(
                    amount.sub(currentEpochCheckpoint.newDeposits)
                );
                currentEpochCheckpoint.newDeposits = 0;
                currentEpochCheckpoint.multiplier = BASE_MULTIPLIER;
            }
            uint256 balanceAfter = getCheckpointEffectiveBalance(currentEpochCheckpoint);
            poolSize[tokenAddress][currentEpoch].size = poolSize[tokenAddress][currentEpoch].size.sub(balanceBefore.sub(balanceAfter));
            checkpoints[last].startBalance = balances[msg.sender][tokenAddress];
        }
        emit Withdraw(msg.sender, tokenAddress, amount);
    }
    /*
     * manualEpochInit can be used by anyone to initialize an epoch based on the previous one
     * This is only applicable if there was no action (deposit/withdraw) in the current epoch.
     * Any deposit and withdraw will automatically initialize the current and next epoch.
     */
    function manualEpochInit(address[] memory tokens, uint128 epochId) public {
        require(epochId <= getCurrentEpoch(), "can't init a future epoch");
        for (uint i = 0; i < tokens.length; i++) {
            Pool storage p = poolSize[tokens[i]][epochId];
            if (epochId == 0) {
                p.size = uint256(0);
                p.set = true;
            } else {
                require(!epochIsInitialized(tokens[i], epochId), "Staking: epoch already initialized");
                require(epochIsInitialized(tokens[i], epochId - 1), "Staking: previous epoch not initialized");
                p.size = poolSize[tokens[i]][epochId - 1].size;
                p.set = true;
            }
        }
        emit ManualEpochInit(msg.sender, epochId, tokens);
    }
    function emergencyWithdraw(address tokenAddress) public {
        require((getCurrentEpoch() - lastWithdrawEpochId[tokenAddress]) >= 10, "At least 10 epochs must pass without success");
        uint256 totalUserBalance = balances[msg.sender][tokenAddress];
        require(totalUserBalance > 0, "Amount must be > 0");
        balances[msg.sender][tokenAddress] = 0;
        IERC20 token = IERC20(tokenAddress);
        token.transfer(msg.sender, totalUserBalance);
        emit EmergencyWithdraw(msg.sender, tokenAddress, totalUserBalance);
    }
    /*
     * Returns the valid balance of a user that was taken into consideration in the total pool size for the epoch
     * A deposit will only change the next epoch balance.
     * A withdraw will decrease the current epoch (and subsequent) balance.
     */
    function getEpochUserBalance(address user, address token, uint128 epochId) public view returns (uint256) {
        Checkpoint[] storage checkpoints = balanceCheckpoints[user][token];
        // if there are no checkpoints, it means the user never deposited any tokens, so the balance is 0
        if (checkpoints.length == 0 || epochId < checkpoints[0].epochId) {
            return 0;
        }
        uint min = 0;
        uint max = checkpoints.length - 1;
        // shortcut for blocks newer than the latest checkpoint == current balance
        if (epochId >= checkpoints[max].epochId) {
            return getCheckpointEffectiveBalance(checkpoints[max]);
        }
        // binary search of the value in the array
        while (max > min) {
            uint mid = (max + min + 1) / 2;
            if (checkpoints[mid].epochId <= epochId) {
                min = mid;
            } else {
                max = mid - 1;
            }
        }
        return getCheckpointEffectiveBalance(checkpoints[min]);
    }
    /*
     * Returns the amount of `token` that the `user` has currently staked
     */
    function balanceOf(address user, address token) public view returns (uint256) {
        return balances[user][token];
    }
    /*
     * Returns the id of the current epoch derived from block.timestamp
     */
    function getCurrentEpoch() public view returns (uint128) {
        if (block.timestamp < epoch1Start) {
            return 0;
        }
        return uint128((block.timestamp - epoch1Start) / epochDuration + 1);
    }
    /*
     * Returns the total amount of `tokenAddress` that was locked from beginning to end of epoch identified by `epochId`
     */
    function getEpochPoolSize(address tokenAddress, uint128 epochId) public view returns (uint256) {
        // Premises:
        // 1. it's impossible to have gaps of uninitialized epochs
        // - any deposit or withdraw initialize the current epoch which requires the previous one to be initialized
        if (epochIsInitialized(tokenAddress, epochId)) {
            return poolSize[tokenAddress][epochId].size;
        }
        // epochId not initialized and epoch 0 not initialized => there was never any action on this pool
        if (!epochIsInitialized(tokenAddress, 0)) {
            return 0;
        }
        // epoch 0 is initialized => there was an action at some point but none that initialized the epochId
        // which means the current pool size is equal to the current balance of token held by the staking contract
        IERC20 token = IERC20(tokenAddress);
        return token.balanceOf(address(this));
    }
    /*
     * Returns the percentage of time left in the current epoch
     */
    function currentEpochMultiplier() public view returns (uint128) {
        uint128 currentEpoch = getCurrentEpoch();
        uint256 currentEpochEnd = epoch1Start + currentEpoch * epochDuration;
        uint256 timeLeft = currentEpochEnd - block.timestamp;
        uint128 multiplier = uint128(timeLeft * BASE_MULTIPLIER / epochDuration);
        return multiplier;
    }
    function computeNewMultiplier(uint256 prevBalance, uint128 prevMultiplier, uint256 amount, uint128 currentMultiplier) public pure returns (uint128) {
        uint256 prevAmount = prevBalance.mul(prevMultiplier).div(BASE_MULTIPLIER);
        uint256 addAmount = amount.mul(currentMultiplier).div(BASE_MULTIPLIER);
        uint128 newMultiplier = uint128(prevAmount.add(addAmount).mul(BASE_MULTIPLIER).div(prevBalance.add(amount)));
        return newMultiplier;
    }
    /*
     * Checks if an epoch is initialized, meaning we have a pool size set for it
     */
    function epochIsInitialized(address token, uint128 epochId) public view returns (bool) {
        return poolSize[token][epochId].set;
    }
    function getCheckpointBalance(Checkpoint memory c) internal pure returns (uint256) {
        return c.startBalance.add(c.newDeposits);
    }
    function getCheckpointEffectiveBalance(Checkpoint memory c) internal pure returns (uint256) {
        return getCheckpointBalance(c).mul(c.multiplier).div(BASE_MULTIPLIER);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.
    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;
    uint256 private _status;
    constructor () internal {
        _status = _NOT_ENTERED;
    }
    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
        _;
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.6.0;
import "@openzeppelin/contracts-ethereum-package/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "./interfaces/IStaking.sol";
contract YieldFarm {
    // lib
    using SafeMath for uint;
    using SafeMath for uint128;
    // constants
    uint public constant TOTAL_DISTRIBUTED_AMOUNT = 800000;
    uint public constant NR_OF_EPOCHS = 25;
     // state variables
    // addreses
    address private _usdc;
    address private _susd;
    address private _dai;
    address private _communityVault;
    // contracts
    IERC20 private _bond;
    IStaking private _staking;
    // fixed size array holdings total number of epochs + 1 (epoch 0 doesn't count)
    uint[] private epochs = new uint[](NR_OF_EPOCHS + 1);
    // pre-computed variable for optimization. total amount of bond tokens to be distributed on each epoch
    uint private _totalAmountPerEpoch;
    // id of last init epoch, for optimization purposes moved from struct to a single id.
    uint128 public lastInitializedEpoch;
    // state of user harvest epoch
    mapping(address => uint128) private lastEpochIdHarvested;
    uint public epochDuration; // init from staking contract
    uint public epochStart; // init from staking contract
    // events
    event MassHarvest(address indexed user, uint256 epochsHarvested, uint256 totalValue);
    event Harvest(address indexed user, uint128 indexed epochId, uint256 amount);
    // constructor
    constructor(address bondTokenAddress, address usdc, address susd, address dai, address stakeContract, address communityVault) public {
        _bond = IERC20(bondTokenAddress);
        _usdc = usdc;
        _susd = susd;
        _dai = dai;
        _staking = IStaking(stakeContract);
        _communityVault = communityVault;
        epochStart = _staking.epoch1Start();
        epochDuration = _staking.epochDuration();
        _totalAmountPerEpoch = TOTAL_DISTRIBUTED_AMOUNT.mul(10**18).div(NR_OF_EPOCHS);
    }
    // public methods
    // public method to harvest all the unharvested epochs until current epoch - 1
    function massHarvest() external returns (uint){
        uint totalDistributedValue;
        uint epochId = _getEpochId().sub(1); // fails in epoch 0
        // force max number of epochs
        if (epochId > NR_OF_EPOCHS) {
            epochId = NR_OF_EPOCHS;
        }
        for (uint128 i = lastEpochIdHarvested[msg.sender] + 1; i <= epochId; i++) {
            // i = epochId
            // compute distributed Value and do one single transfer at the end
            totalDistributedValue += _harvest(i);
        }
        emit MassHarvest(msg.sender, epochId.sub(lastEpochIdHarvested[msg.sender]), totalDistributedValue);
        if (totalDistributedValue > 0) {
            _bond.transferFrom(_communityVault, msg.sender, totalDistributedValue);
        }
        return totalDistributedValue;
    }
    function harvest (uint128 epochId) external returns (uint){
        // checks for requested epoch
        require (_getEpochId() > epochId, "This epoch is in the future");
        require(epochId <= NR_OF_EPOCHS, "Maximum number of epochs is 25");
        require (lastEpochIdHarvested[msg.sender].add(1) == epochId, "Harvest in order");
        uint userReward = _harvest(epochId);
        if (userReward > 0) {
            _bond.transferFrom(_communityVault, msg.sender, userReward);
        }
        emit Harvest(msg.sender, epochId, userReward);
        return userReward;
    }
    // views
    // calls to the staking smart contract to retrieve the epoch total pool size
    function getPoolSize(uint128 epochId) external view returns (uint) {
        return _getPoolSize(epochId);
    }
    function getCurrentEpoch() external view returns (uint) {
        return _getEpochId();
    }
    // calls to the staking smart contract to retrieve user balance for an epoch
    function getEpochStake(address userAddress, uint128 epochId) external view returns (uint) {
        return _getUserBalancePerEpoch(userAddress, epochId);
    }
    function userLastEpochIdHarvested() external view returns (uint){
        return lastEpochIdHarvested[msg.sender];
    }
    // internal methods
    function _initEpoch(uint128 epochId) internal {
        require(lastInitializedEpoch.add(1) == epochId, "Epoch can be init only in order");
        lastInitializedEpoch = epochId;
        // call the staking smart contract to init the epoch
        epochs[epochId] = _getPoolSize(epochId);
    }
    function _harvest (uint128 epochId) internal returns (uint) {
        // try to initialize an epoch. if it can't it fails
        // if it fails either user either a BarnBridge account will init not init epochs
        if (lastInitializedEpoch < epochId) {
            _initEpoch(epochId);
        }
        // Set user last harvested epoch
        lastEpochIdHarvested[msg.sender] = epochId;
        // compute and return user total reward. For optimization reasons the transfer have been moved to an upper layer (i.e. massHarvest needs to do a single transfer)
        // exit if there is no stake on the epoch
        if (epochs[epochId] == 0) {
            return 0;
        }
        return _totalAmountPerEpoch
        .mul(_getUserBalancePerEpoch(msg.sender, epochId))
        .div(epochs[epochId]);
    }
    function _getPoolSize(uint128 epochId) internal view returns (uint) {
        // retrieve stable coins total staked in epoch
        uint valueUsdc = _staking.getEpochPoolSize(_usdc, epochId).mul(10 ** 12); // for usdc which has 6 decimals add a 10**12 to get to a common ground
        uint valueSusd = _staking.getEpochPoolSize(_susd, epochId);
        uint valueDai = _staking.getEpochPoolSize(_dai, epochId);
        return valueUsdc.add(valueSusd).add(valueDai);
    }
    function _getUserBalancePerEpoch(address userAddress, uint128 epochId) internal view returns (uint){
        // retrieve stable coins total staked per user in epoch
        uint valueUsdc = _staking.getEpochUserBalance(userAddress, _usdc, epochId).mul(10 ** 12); // for usdc which has 6 decimals add a 10**12 to get to a common ground
        uint valueSusd = _staking.getEpochUserBalance(userAddress, _susd, epochId);
        uint valueDai = _staking.getEpochUserBalance(userAddress, _dai, epochId);
        return valueUsdc.add(valueSusd).add(valueDai);
    }
    // compute epoch id from blocktimestamp and epochstart date
    function _getEpochId() internal view returns (uint128 epochId) {
        if (block.timestamp < epochStart) {
            return 0;
        }
        epochId = uint128(block.timestamp.sub(epochStart).div(epochDuration).add(1));
    }
}
pragma solidity ^0.6.0;
/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;
        return c;
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }
    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }
    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold
        return c;
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.6.0;
import "@openzeppelin/contracts-ethereum-package/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "./interfaces/IStaking.sol";
contract YieldFarmLP {
    // lib
    using SafeMath for uint;
    using SafeMath for uint128;
    // constants
    uint public constant TOTAL_DISTRIBUTED_AMOUNT = 2000000;
    uint public constant NR_OF_EPOCHS = 100;
    // state variables
    // addreses
    address private _uniLP;
    address private _communityVault;
    // contracts
    IERC20 private _bond;
    IStaking private _staking;
    uint[] private epochs = new uint[](NR_OF_EPOCHS + 1);
    uint private _totalAmountPerEpoch;
    uint128 public lastInitializedEpoch;
    mapping(address => uint128) private lastEpochIdHarvested;
    uint public epochDuration; // init from staking contract
    uint public epochStart; // init from staking contract
    // events
    event MassHarvest(address indexed user, uint256 epochsHarvested, uint256 totalValue);
    event Harvest(address indexed user, uint128 indexed epochId, uint256 amount);
    // constructor
    constructor(address bondTokenAddress, address uniLP, address stakeContract, address communityVault) public {
        _bond = IERC20(bondTokenAddress);
        _uniLP = uniLP;
        _staking = IStaking(stakeContract);
        _communityVault = communityVault;
        epochDuration = _staking.epochDuration();
        epochStart = _staking.epoch1Start() + epochDuration;
        _totalAmountPerEpoch = TOTAL_DISTRIBUTED_AMOUNT.mul(10**18).div(NR_OF_EPOCHS);
    }
    // public methods
    // public method to harvest all the unharvested epochs until current epoch - 1
    function massHarvest() external returns (uint){
        uint totalDistributedValue;
        uint epochId = _getEpochId().sub(1); // fails in epoch 0
        // force max number of epochs
        if (epochId > NR_OF_EPOCHS) {
            epochId = NR_OF_EPOCHS;
        }
        for (uint128 i = lastEpochIdHarvested[msg.sender] + 1; i <= epochId; i++) {
            // i = epochId
            // compute distributed Value and do one single transfer at the end
            totalDistributedValue += _harvest(i);
        }
        emit MassHarvest(msg.sender, epochId - lastEpochIdHarvested[msg.sender], totalDistributedValue);
        if (totalDistributedValue > 0) {
            _bond.transferFrom(_communityVault, msg.sender, totalDistributedValue);
        }
        return totalDistributedValue;
    }
    function harvest (uint128 epochId) external returns (uint){
        // checks for requested epoch
        require (_getEpochId() > epochId, "This epoch is in the future");
        require(epochId <= NR_OF_EPOCHS, "Maximum number of epochs is 100");
        require (lastEpochIdHarvested[msg.sender].add(1) == epochId, "Harvest in order");
        uint userReward = _harvest(epochId);
        if (userReward > 0) {
            _bond.transferFrom(_communityVault, msg.sender, userReward);
        }
        emit Harvest(msg.sender, epochId, userReward);
        return userReward;
    }
    // views
    // calls to the staking smart contract to retrieve the epoch total pool size
    function getPoolSize(uint128 epochId) external view returns (uint) {
        return _getPoolSize(epochId);
    }
    function getCurrentEpoch() external view returns (uint) {
        return _getEpochId();
    }
    // calls to the staking smart contract to retrieve user balance for an epoch
    function getEpochStake(address userAddress, uint128 epochId) external view returns (uint) {
        return _getUserBalancePerEpoch(userAddress, epochId);
    }
    function userLastEpochIdHarvested() external view returns (uint){
        return lastEpochIdHarvested[msg.sender];
    }
    // internal methods
    function _initEpoch(uint128 epochId) internal {
        require(lastInitializedEpoch.add(1) == epochId, "Epoch can be init only in order");
        lastInitializedEpoch = epochId;
        // call the staking smart contract to init the epoch
        epochs[epochId] = _getPoolSize(epochId);
    }
    function _harvest (uint128 epochId) internal returns (uint) {
        // try to initialize an epoch. if it can't it fails
        // if it fails either user either a BarnBridge account will init not init epochs
        if (lastInitializedEpoch < epochId) {
            _initEpoch(epochId);
        }
        // Set user state for last harvested
        lastEpochIdHarvested[msg.sender] = epochId;
        // compute and return user total reward. For optimization reasons the transfer have been moved to an upper layer (i.e. massHarvest needs to do a single transfer)
        // exit if there is no stake on the epoch
        if (epochs[epochId] == 0) {
            return 0;
        }
        return _totalAmountPerEpoch
        .mul(_getUserBalancePerEpoch(msg.sender, epochId))
        .div(epochs[epochId]);
    }
    function _getPoolSize(uint128 epochId) internal view returns (uint) {
        // retrieve unilp token balance
        return _staking.getEpochPoolSize(_uniLP, _stakingEpochId(epochId));
    }
    function _getUserBalancePerEpoch(address userAddress, uint128 epochId) internal view returns (uint){
        // retrieve unilp token balance per user per epoch
        return _staking.getEpochUserBalance(userAddress, _uniLP, _stakingEpochId(epochId));
    }
    // compute epoch id from blocktimestamp and epochstart date
    function _getEpochId() internal view returns (uint128 epochId) {
        if (block.timestamp < epochStart) {
            return 0;
        }
        epochId = uint128(block.timestamp.sub(epochStart).div(epochDuration).add(1));
    }
    // get the staking epoch which is 1 epoch more
    function _stakingEpochId(uint128 epochId) pure internal returns (uint128) {
        return epochId + 1;
    }
}

pragma solidity ^0.4.16;


/**
 * @title SafeMath
 * @dev Math operations with safety checks that throw on error
 */
library SafeMath {
  function mul(uint256 a, uint256 b) internal constant returns (uint256) {
    uint256 c = a * b;
    assert(a == 0 || c / a == b);
    return c;
  }

  function div(uint256 a, uint256 b) internal constant returns (uint256) {
    // assert(b > 0); // Solidity automatically throws when dividing by 0
    uint256 c = a / b;
    // assert(a == b * c + a % b); // There is no case in which this doesn't hold
    return c;
  }

  function sub(uint256 a, uint256 b) internal constant returns (uint256) {
    assert(b <= a);
    return a - b;
  }

  function add(uint256 a, uint256 b) internal constant returns (uint256) {
    uint256 c = a + b;
    assert(c >= a);
    return c;
  }
}


/**
 * @title ERC20Basic
 * @dev Simpler version of ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/179
 */
contract ERC20Basic {
  uint256 public totalSupply;
  function balanceOf(address who) constant returns (uint256);
  function transfer(address to, uint256 value) returns (bool);
  event Transfer(address indexed from, address indexed to, uint256 value);
}
/**
 * @title ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/20
 */
contract ERC20 is ERC20Basic {
  function allowance(address owner, address spender) constant returns (uint256);
  function transferFrom(address from, address to, uint256 value) returns (bool);
  function approve(address spender, uint256 value) returns (bool);
  event Approval(address indexed owner, address indexed spender, uint256 value);
}

contract ERC677 is ERC20 {
  function transferAndCall(address to, uint value, bytes data) returns (bool success);

  event Transfer(address indexed from, address indexed to, uint value, bytes data);
}

contract ERC677Receiver {
  function onTokenTransfer(address _sender, uint _value, bytes _data);
}

/**
 * @title Basic token
 * @dev Basic version of StandardToken, with no allowances. 
 */
contract BasicToken is ERC20Basic {
  using SafeMath for uint256;

  mapping(address => uint256) balances;

  /**
  * @dev transfer token for a specified address
  * @param _to The address to transfer to.
  * @param _value The amount to be transferred.
  */
  function transfer(address _to, uint256 _value) returns (bool) {
    balances[msg.sender] = balances[msg.sender].sub(_value);
    balances[_to] = balances[_to].add(_value);
    Transfer(msg.sender, _to, _value);
    return true;
  }

  /**
  * @dev Gets the balance of the specified address.
  * @param _owner The address to query the the balance of. 
  * @return An uint256 representing the amount owned by the passed address.
  */
  function balanceOf(address _owner) constant returns (uint256 balance) {
    return balances[_owner];
  }

}


/**
 * @title Standard ERC20 token
 *
 * @dev Implementation of the basic standard token.
 * @dev https://github.com/ethereum/EIPs/issues/20
 * @dev Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
 */
contract StandardToken is ERC20, BasicToken {

  mapping (address => mapping (address => uint256)) allowed;


  /**
   * @dev Transfer tokens from one address to another
   * @param _from address The address which you want to send tokens from
   * @param _to address The address which you want to transfer to
   * @param _value uint256 the amount of tokens to be transferred
   */
  function transferFrom(address _from, address _to, uint256 _value) returns (bool) {
    var _allowance = allowed[_from][msg.sender];

    // Check is not needed because sub(_allowance, _value) will already throw if this condition is not met
    // require (_value <= _allowance);

    balances[_from] = balances[_from].sub(_value);
    balances[_to] = balances[_to].add(_value);
    allowed[_from][msg.sender] = _allowance.sub(_value);
    Transfer(_from, _to, _value);
    return true;
  }

  /**
   * @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
   * @param _spender The address which will spend the funds.
   * @param _value The amount of tokens to be spent.
   */
  function approve(address _spender, uint256 _value) returns (bool) {
    allowed[msg.sender][_spender] = _value;
    Approval(msg.sender, _spender, _value);
    return true;
  }

  /**
   * @dev Function to check the amount of tokens that an owner allowed to a spender.
   * @param _owner address The address which owns the funds.
   * @param _spender address The address which will spend the funds.
   * @return A uint256 specifying the amount of tokens still available for the spender.
   */
  function allowance(address _owner, address _spender) constant returns (uint256 remaining) {
    return allowed[_owner][_spender];
  }
  
    /*
   * approve should be called when allowed[_spender] == 0. To increment
   * allowed value is better to use this function to avoid 2 calls (and wait until 
   * the first transaction is mined)
   * From MonolithDAO Token.sol
   */
  function increaseApproval (address _spender, uint _addedValue) 
    returns (bool success) {
    allowed[msg.sender][_spender] = allowed[msg.sender][_spender].add(_addedValue);
    Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
    return true;
  }

  function decreaseApproval (address _spender, uint _subtractedValue) 
    returns (bool success) {
    uint oldValue = allowed[msg.sender][_spender];
    if (_subtractedValue > oldValue) {
      allowed[msg.sender][_spender] = 0;
    } else {
      allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
    }
    Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
    return true;
  }

}

contract ERC677Token is ERC677 {

  /**
  * @dev transfer token to a contract address with additional data if the recipient is a contact.
  * @param _to The address to transfer to.
  * @param _value The amount to be transferred.
  * @param _data The extra data to be passed to the receiving contract.
  */
  function transferAndCall(address _to, uint _value, bytes _data)
    public
    returns (bool success)
  {
    super.transfer(_to, _value);
    Transfer(msg.sender, _to, _value, _data);
    if (isContract(_to)) {
      contractFallback(_to, _value, _data);
    }
    return true;
  }


  // PRIVATE

  function contractFallback(address _to, uint _value, bytes _data)
    private
  {
    ERC677Receiver receiver = ERC677Receiver(_to);
    receiver.onTokenTransfer(msg.sender, _value, _data);
  }

  function isContract(address _addr)
    private
    returns (bool hasCode)
  {
    uint length;
    assembly { length := extcodesize(_addr) }
    return length > 0;
  }

}

contract LinkToken is StandardToken, ERC677Token {

  uint public constant totalSupply = 10**27;
  string public constant name = 'ChainLink Token';
  uint8 public constant decimals = 18;
  string public constant symbol = 'LINK';

  function LinkToken()
    public
  {
    balances[msg.sender] = totalSupply;
  }

  /**
  * @dev transfer token to a specified address with additional data if the recipient is a contract.
  * @param _to The address to transfer to.
  * @param _value The amount to be transferred.
  * @param _data The extra data to be passed to the receiving contract.
  */
  function transferAndCall(address _to, uint _value, bytes _data)
    public
    validRecipient(_to)
    returns (bool success)
  {
    return super.transferAndCall(_to, _value, _data);
  }

  /**
  * @dev transfer token to a specified address.
  * @param _to The address to transfer to.
  * @param _value The amount to be transferred.
  */
  function transfer(address _to, uint _value)
    public
    validRecipient(_to)
    returns (bool success)
  {
    return super.transfer(_to, _value);
  }

  /**
   * @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
   * @param _spender The address which will spend the funds.
   * @param _value The amount of tokens to be spent.
   */
  function approve(address _spender, uint256 _value)
    public
    validRecipient(_spender)
    returns (bool)
  {
    return super.approve(_spender,  _value);
  }

  /**
   * @dev Transfer tokens from one address to another
   * @param _from address The address which you want to send tokens from
   * @param _to address The address which you want to transfer to
   * @param _value uint256 the amount of tokens to be transferred
   */
  function transferFrom(address _from, address _to, uint256 _value)
    public
    validRecipient(_to)
    returns (bool)
  {
    return super.transferFrom(_from, _to, _value);
  }


  // MODIFIERS

  modifier validRecipient(address _recipient) {
    require(_recipient != address(0) && _recipient != address(this));
    _;
  }

}