// File: MindAI/SafeMath.sol


// OpenZeppelin Contracts (last updated v4.6.0) (utils/math/SafeMath.sol)

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}
// File: MindAI/Address.sol


// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// File: MindAI/IERC20.sol


// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}
// File: MindAI/SafeERC20.sol


// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;



/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}
// File: MindAI/ReentrancyGuard.sol


// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}
// File: MindAI/Context.sol


// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}
// File: MindAI/Ownable.sol


// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)

pragma solidity ^0.8.0;


/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}
// File: MindAI/MindAIStaking.sol

//SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.0;





abstract contract IERC20Staking is ReentrancyGuard, Ownable {

    struct Plan {
        uint256 overallStaked;
        uint256 stakesCount;
        uint256 apr;
        uint256 stakeDuration;
        bool initialPool;
        bool conclude;
    }
    
    struct Staking {
        uint256 amount;
        uint256 stakeAt;
        uint256 endstakeAt;
    }

    mapping(uint256 => mapping(address => Staking[])) public stakes;

    // Declare state variables for tracking rewards
    uint256 public totalRewards;
    mapping(uint256 => uint256) public totalRewardsPerPlan;
    mapping(address => uint256) public totalEarnedRewardsPerWallet;

    // Declare state variable for tracking rewards per wallet per plan
    mapping(uint256 => mapping(address => uint256)) public totalRewardsPerWalletPerPlan;


    address public stakingToken;
    mapping(uint256 => Plan) public plans;
    mapping(address => bool) public blacklist;

    modifier notBlacklisted() {
        require(!blacklist[msg.sender], "Address is blacklisted");
        _;
    }

    constructor(address _stakingToken) {
        stakingToken = _stakingToken;
    }

    function stake(uint256 _stakingId, uint256 _amount) public virtual;
    function canWithdrawAmount(uint256 _stakingId, address account) public virtual view returns (uint256, uint256);
    function unstake(uint256 _stakingId, uint256 _amount) public virtual;
    function earnedToken(uint256 _stakingId, address account) public virtual view returns (uint256);
    function claimEarned(uint256 _stakingId) public virtual;
    function getStakedPlans(address _account) public virtual view returns (bool[] memory);
}

contract MindAIStaking is IERC20Staking {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    uint256 public periodicTime = 365 days;
    uint256 public planLimit = 4;
    uint256 minAPR = 1;

    constructor(address _stakingToken) IERC20Staking(_stakingToken) {

        plans[0].apr = 30;
        plans[0].stakeDuration = 7 days;

        plans[1].apr = 50;
        plans[1].stakeDuration = 15 days;

        plans[2].apr = 100;
        plans[2].stakeDuration = 30 days;

        plans[3].apr = 200;
        plans[3].stakeDuration = 60 days;
    }

    function stake(uint256 _stakingId, uint256 _amount) public nonReentrant override {
        require(_amount > 0, "Staking Amount cannot be zero");
        require(
            IERC20(stakingToken).balanceOf(msg.sender) >= _amount,
            "Balance is not enough"
        );
        require(_stakingId < planLimit, "Staking is unavailable");
        
        Plan storage plan = plans[_stakingId];
        require(!plan.conclude, "Staking in this pool is concluded");

        uint256 beforeBalance = IERC20(stakingToken).balanceOf(address(this));
        IERC20(stakingToken).transferFrom(msg.sender, address(this), _amount);
        uint256 afterBalance = IERC20(stakingToken).balanceOf(address(this));
        uint256 amount = afterBalance - beforeBalance;
        
        uint256 stakelength = stakes[_stakingId][msg.sender].length;
        
        if(stakelength == 0) {
            plan.stakesCount += 1;
        }

        stakes[_stakingId][msg.sender].push();
        
        Staking storage _staking = stakes[_stakingId][msg.sender][stakelength];
        _staking.amount = amount;
        _staking.stakeAt = block.timestamp;
        _staking.endstakeAt = block.timestamp + plan.stakeDuration;
        
        plan.overallStaked = plan.overallStaked.add(amount);
    }

    function stakeFor(uint256 _stakingId, uint256 _amount, address _beneficiary) public nonReentrant onlyOwner {
        require(_amount > 0, "Staking Amount cannot be zero");
        require(_stakingId < planLimit, "Staking is unavailable");
        require(_beneficiary != address(0), "Beneficiary cannot be zero address");

        Plan storage plan = plans[_stakingId];
        require(!plan.conclude, "Staking in this pool is concluded");

        // Transfer tokens from the sender to the contract
        uint256 beforeBalance = IERC20(stakingToken).balanceOf(address(this));
        IERC20(stakingToken).transferFrom(msg.sender, address(this), _amount);
        uint256 afterBalance = IERC20(stakingToken).balanceOf(address(this));
        uint256 amount = afterBalance.sub(beforeBalance);

        // Update staking details for the beneficiary
        uint256 stakelength = stakes[_stakingId][_beneficiary].length;
        if(stakelength == 0) {
            plan.stakesCount += 1;
        }

        stakes[_stakingId][_beneficiary].push(Staking({
            amount: amount,
            stakeAt: block.timestamp,
            endstakeAt: block.timestamp + plan.stakeDuration
        }));
        
        plan.overallStaked = plan.overallStaked.add(amount);
    }

    function canWithdrawAmount(uint256 _stakingId, address account) public override view returns (uint256, uint256) {
        uint256 _stakedAmount = 0;
        uint256 _canWithdraw = 0;
        
        for (uint256 i = 0; i < stakes[_stakingId][account].length; i++) {
            Staking storage _staking = stakes[_stakingId][account][i];
            _stakedAmount = _stakedAmount.add(_staking.amount);

            // Check if the lock duration has ended for each staking
            if (block.timestamp >= _staking.endstakeAt) {
                _canWithdraw = _canWithdraw.add(_staking.amount);
            }
        }

        return (_stakedAmount, _canWithdraw);
    }

    function earnedToken(uint256 _stakingId, address account) public override view returns (uint256) {
        uint256 _earned = 0;
        Plan storage plan = plans[_stakingId];
        
        for (uint256 i = 0; i < stakes[_stakingId][account].length; i++) {
            Staking storage _staking = stakes[_stakingId][account][i];
            _earned = _earned.add(
                _staking.amount
                    .mul(block.timestamp - _staking.stakeAt)
                    .div(periodicTime)
                    .mul(plan.apr)
                    .div(100)
            );
        }

        return _earned;
    }

    function unstake(uint256 _stakingId, uint256 _amount) public nonReentrant notBlacklisted override {
        uint256 _stakedAmount;
        uint256 _canWithdraw;
        uint256 _earned = 0;

        Plan storage plan = plans[_stakingId];

        // Get the total staked amount and the amount that can be withdrawn
        (_stakedAmount, _canWithdraw) = canWithdrawAmount(_stakingId, msg.sender);
        require(_canWithdraw >= _amount, "Withdraw amount exceeds allowed limit");

        uint256 remainingAmountToUnstake = _amount;
        
        for (uint256 i = stakes[_stakingId][msg.sender].length; i > 0; i--) {
            Staking storage _staking = stakes[_stakingId][msg.sender][i-1];

            // Check if the lock duration has ended
            if (block.timestamp >= _staking.endstakeAt && remainingAmountToUnstake > 0) {
                uint256 amountToUnstake = _staking.amount < remainingAmountToUnstake ? _staking.amount : remainingAmountToUnstake;

                // Calculate earned rewards for this stake
                _earned += amountToUnstake
                        .mul(block.timestamp - _staking.stakeAt)
                        .div(periodicTime)
                        .mul(plan.apr)
                        .div(100);

                // Update the staking amount and the amount remaining to be unstaked
                _staking.amount -= amountToUnstake;
                remainingAmountToUnstake -= amountToUnstake;
            }
        }

        require(remainingAmountToUnstake == 0, "Unable to unstake the full amount");

        // Transfer the unstaked principal amount and earned rewards to the user
        if (_amount > 0) {
            IERC20(stakingToken).transfer(msg.sender, _amount);
        }
        
        if (_earned > 0) {
            IERC20(stakingToken).transfer(msg.sender, _earned);
            
            totalRewards = totalRewards.add(_earned);
            totalRewardsPerPlan[_stakingId] = totalRewardsPerPlan[_stakingId].add(_earned);

            totalRewardsPerWalletPerPlan[_stakingId][msg.sender] = totalRewardsPerWalletPerPlan[_stakingId][msg.sender].add(_earned);

            // Update the total earned rewards for the wallet
            totalEarnedRewardsPerWallet[msg.sender] += _earned;
        }

        // Update the overall staked amount in the plan
        plan.overallStaked = plan.overallStaked.sub(_amount);
    }

    function claimEarned(uint256 _stakingId) public override {
        uint256 _earned = 0;
        Plan storage plan = plans[_stakingId];

        require(stakes[_stakingId][msg.sender].length > 0, "No stakes found");

        for (uint256 i = 0; i < stakes[_stakingId][msg.sender].length; i++) {
            Staking storage _staking = stakes[_stakingId][msg.sender][i];
            
            _earned = _earned.add(
                _staking
                    .amount
                    .mul(plan.apr)
                    .mul(block.timestamp - _staking.stakeAt)
                    .div(periodicTime)
                    .div(100)
            );

            totalRewards = totalRewards.add(_earned);
            totalRewardsPerPlan[_stakingId] = totalRewardsPerPlan[_stakingId].add(_earned);

            totalRewardsPerWalletPerPlan[_stakingId][msg.sender] = totalRewardsPerWalletPerPlan[_stakingId][msg.sender].add(_earned);

            // Update the total earned rewards for the wallet
            totalEarnedRewardsPerWallet[msg.sender] += _earned;
        
            
            _staking.stakeAt = block.timestamp;
            
        }
        require(_earned > 0, "There is no amount to claim");
        IERC20(stakingToken).transfer(msg.sender, _earned);
    }

    function getStakedPlans(address _account) public override view returns (bool[] memory) {
        bool[] memory walletPlans = new bool[](planLimit);
        for (uint256 i = 0; i < planLimit; i++) {
            walletPlans[i] = stakes[i][_account].length == 0 ? false : true;
        }
        return walletPlans;
    }

    function setAPR(uint256 _stakingId, uint256 _percent) external onlyOwner {
        require(_percent >= minAPR);
        plans[_stakingId].apr = _percent;
    }

    function setStakeConclude(uint256 _stakingId, bool _conclude) external onlyOwner {
        plans[_stakingId].conclude = _conclude;
    }

    function addToBlacklist(address _address) external onlyOwner {
        blacklist[_address] = true;
    }

    function removeFromBlacklist(address _address) external onlyOwner {
        blacklist[_address] = false;
    }

      // Getter functions to retrieve totalRewards and totalRewardsPerPlan
    function getTotalRewards() public view returns (uint256) {
        return totalRewards;
    }

    function getTotalRewardsPerPlan(uint256 _stakingId) public view returns (uint256) {
        return totalRewardsPerPlan[_stakingId];
    }

    // Getter function to retrieve total earned rewards for a specific wallet
    function getTotalEarnedRewardsPerWallet(address _wallet) public view returns (uint256) {
        return totalEarnedRewardsPerWallet[_wallet];
    }

    receive() external payable {}
}

/**
Welcome to MindAI - $MDAI

Dive into the MindAI era, a groundbreaking platform that redefines the matter of AI. 
MindAI isn't just another AI interface, it's an intelligent, interactive ecosystem directly available via Telegram. 

70+ personalized AI interactions.
ChatGPT 3.5, 4, 4 Turbo.
100% Revenue Share.
Reach up to 200% Staking APY.

Our aim is to create something truly unique
A product that stands apart by providing personalized, AI-driven insights and learning experiences. 
Whether it's navigating the complexities of the cryptocurrency market or exploring new areas like music and art.
MindAI is designed to be your companion in learning and growth.
 
Telegram: https://t.me/MindAIProject
Twitter:  https://x.com/MindAIProject
Website:  http://MindAIProject.com
*/

// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.9;
 
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
}
 
interface IERC20 {
    function totalSupply() external view returns (uint256);
 
    function balanceOf(address account) external view returns (uint256);
 
    function transfer(address recipient, uint256 amount) external returns (bool);
 
    function allowance(address owner, address spender) external view returns (uint256);
 
    function approve(address spender, uint256 amount) external returns (bool);
 
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);
 
    event Transfer(address indexed from, address indexed to, uint256 value);
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );
}
 
contract Ownable is Context {
    address private _owner;
    address private _previousOwner;
    event OwnershipTransferred(
        address indexed previousOwner,
        address indexed newOwner
    );
 
    constructor() {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }
 
    function owner() public view returns (address) {
        return _owner;
    }
 
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }
 
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }
 
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
 
}
 
library SafeMath {
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }
 
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }
 
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;
        return c;
    }
 
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }
 
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }
 
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        return c;
    }
}
 
interface IUniswapV2Factory {
    function createPair(address tokenA, address tokenB)
        external
        returns (address pair);
}
 
interface IUniswapV2Router02 {
    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external;
 
    function factory() external pure returns (address);
 
    function WETH() external pure returns (address);
 
    function addLiquidityETH(
        address token,
        uint256 amountTokenDesired,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline
    )
        external
        payable
        returns (
            uint256 amountToken,
            uint256 amountETH,
            uint256 liquidity
        );
}
 
contract MindAI is Context, IERC20, Ownable {
 
    using SafeMath for uint256;
 
    string private constant _name = "MindAI";
    string private constant _symbol = "MDAI";
    uint8 private constant _decimals = 18;
 
    mapping(address => uint256) private _rOwned;
    mapping(address => uint256) private _tOwned;
    mapping(address => mapping(address => uint256)) private _allowances;
    mapping(address => bool) private _isExcludedFromFee;
    uint256 private constant MAX = ~uint256(0);
    uint256 private constant _tTotal = 1000000 * 10**18;
    uint256 private _rTotal = (MAX - (MAX % _tTotal));
    uint256 private _tFeeTotal;
    uint256 private _redisFeeOnBuy = 0;  
    uint256 private _taxFeeOnBuy = 5;  
    uint256 private _redisFeeOnSell = 0;  
    uint256 private _taxFeeOnSell = 5;
 
    //Original Fee
    uint256 private _redisFee = _redisFeeOnSell;
    uint256 private _taxFee = _taxFeeOnSell;
 
    uint256 private _previousredisFee = _redisFee;
    uint256 private _previoustaxFee = _taxFee;
 
    mapping(address => bool) public bots; mapping (address => uint256) public _buyMap; 
    address payable private _developmentAddress = payable(0xEB981ec9030D8B324d79Dd14fE451928FDBD0fe4); 
    address payable private _marketingAddress = payable(0xEB981ec9030D8B324d79Dd14fE451928FDBD0fe4);
 
    IUniswapV2Router02 public uniswapV2Router;
    address public uniswapV2Pair;
 
    bool private tradingOpen;
    bool private inSwap = false;
    bool private swapEnabled = true;
 
    uint256 public _maxTxAmount = 20000 * 10**18;
    uint256 public _maxWalletSize = 20000 * 10**18;
    uint256 public _swapTokensAtAmount = 100 * 10**18;
 
    event MaxTxAmountUpdated(uint256 _maxTxAmount);
    modifier lockTheSwap {
        inSwap = true;
        _;
        inSwap = false;
    }
 
    constructor() {
 
        _rOwned[_msgSender()] = _rTotal;
 
        IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);//
        uniswapV2Router = _uniswapV2Router;
        uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
            .createPair(address(this), _uniswapV2Router.WETH());
 
        _isExcludedFromFee[owner()] = true;
        _isExcludedFromFee[address(this)] = true;
        _isExcludedFromFee[_developmentAddress] = true;
        _isExcludedFromFee[_marketingAddress] = true;
 
        emit Transfer(address(0), _msgSender(), _tTotal);
    }
 
    function name() public pure returns (string memory) {
        return _name;
    }
 
    function symbol() public pure returns (string memory) {
        return _symbol;
    }
 
    function decimals() public pure returns (uint8) {
        return _decimals;
    }
 
    function totalSupply() public pure override returns (uint256) {
        return _tTotal;
    }
 
    function balanceOf(address account) public view override returns (uint256) {
        return tokenFromReflection(_rOwned[account]);
    }
 
    function transfer(address recipient, uint256 amount)
        public
        override
        returns (bool)
    {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }
 
    function allowance(address owner, address spender)
        public
        view
        override
        returns (uint256)
    {
        return _allowances[owner][spender];
    }
 
    function approve(address spender, uint256 amount)
        public
        override
        returns (bool)
    {
        _approve(_msgSender(), spender, amount);
        return true;
    }
 
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) public override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(
            sender,
            _msgSender(),
            _allowances[sender][_msgSender()].sub(
                amount,
                "ERC20: transfer amount exceeds allowance"
            )
        );
        return true;
    }
 
    function tokenFromReflection(uint256 rAmount)
        private
        view
        returns (uint256)
    {
        require(
            rAmount <= _rTotal,
            "Amount must be less than total reflections"
        );
        uint256 currentRate = _getRate();
        return rAmount.div(currentRate);
    }
 
    function removeAllFee() private {
        if (_redisFee == 0 && _taxFee == 0) return;
 
        _previousredisFee = _redisFee;
        _previoustaxFee = _taxFee;
 
        _redisFee = 0;
        _taxFee = 0;
    }
 
    function restoreAllFee() private {
        _redisFee = _previousredisFee;
        _taxFee = _previoustaxFee;
    }
 
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) private {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");
        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }
 
    function _transfer(
        address from,
        address to,
        uint256 amount
    ) private {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");
        require(amount > 0, "Transfer amount must be greater than zero");
 
        if (from != owner() && to != owner()) {
 
            //Trade start check
            if (!tradingOpen) {
                require(from == owner(), "TOKEN: This account cannot send tokens until trading is enabled");
            }
 
            require(amount <= _maxTxAmount, "TOKEN: Max Transaction Limit");
 
            if(to != uniswapV2Pair) {
                require(balanceOf(to) + amount < _maxWalletSize, "TOKEN: Balance exceeds wallet size!");
            }
 
            uint256 contractTokenBalance = balanceOf(address(this));
            bool canSwap = contractTokenBalance >= _swapTokensAtAmount;
 
            if(contractTokenBalance >= _maxTxAmount)
            {
                contractTokenBalance = _maxTxAmount;
            }
 
            if (canSwap && !inSwap && from != uniswapV2Pair && swapEnabled && !_isExcludedFromFee[from] && !_isExcludedFromFee[to]) {
                swapTokensForEth(contractTokenBalance);
                uint256 contractETHBalance = address(this).balance;
                if (contractETHBalance > 0) {
                    sendETHToFee(address(this).balance);
                }
            }
        }
 
        bool takeFee = true;
 
        //Transfer Tokens
        if ((_isExcludedFromFee[from] || _isExcludedFromFee[to]) || (from != uniswapV2Pair && to != uniswapV2Pair)) {
            takeFee = false;
        } else {
 
            //Set Fee for Buys
            if(from == uniswapV2Pair && to != address(uniswapV2Router)) {
                _redisFee = _redisFeeOnBuy;
                _taxFee = _taxFeeOnBuy;
            }
 
            //Set Fee for Sells
            if (to == uniswapV2Pair && from != address(uniswapV2Router)) {
                _redisFee = _redisFeeOnSell;
                _taxFee = _taxFeeOnSell;
            }
 
        }
 
        _tokenTransfer(from, to, amount, takeFee);
    }
 
    function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
        address[] memory path = new address[](2);
        path[0] = address(this);
        path[1] = uniswapV2Router.WETH();
        _approve(address(this), address(uniswapV2Router), tokenAmount);
        uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
            tokenAmount,
            0,
            path,
            address(this),
            block.timestamp
        );
    }
 
    function sendETHToFee(uint256 amount) private {
        _marketingAddress.transfer(amount);
    }
 
    function setTrading(bool _tradingOpen) public onlyOwner {
        require(!tradingOpen, "Cannot reenable trading");
        tradingOpen = _tradingOpen;
    }
 
    function manualswap() external {
        require(_msgSender() == _developmentAddress || _msgSender() == _marketingAddress);
        uint256 contractBalance = balanceOf(address(this));
        swapTokensForEth(contractBalance);
    }
 
    function manualsend() external {
        require(_msgSender() == _developmentAddress || _msgSender() == _marketingAddress);
        uint256 contractETHBalance = address(this).balance;
        sendETHToFee(contractETHBalance);
    }
 
    function _tokenTransfer(
        address sender,
        address recipient,
        uint256 amount,
        bool takeFee
    ) private {
        if (!takeFee) removeAllFee();
        _transferStandard(sender, recipient, amount);
        if (!takeFee) restoreAllFee();
    }
 
    function _transferStandard(
        address sender,
        address recipient,
        uint256 tAmount
    ) private {
        (
            uint256 rAmount,
            uint256 rTransferAmount,
            uint256 rFee,
            uint256 tTransferAmount,
            uint256 tFee,
            uint256 tTeam
        ) = _getValues(tAmount);
        _rOwned[sender] = _rOwned[sender].sub(rAmount);
        _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
        _takeTeam(tTeam);
        _reflectFee(rFee, tFee);
        emit Transfer(sender, recipient, tTransferAmount);
    }
 
    function _takeTeam(uint256 tTeam) private {
        uint256 currentRate = _getRate();
        uint256 rTeam = tTeam.mul(currentRate);
        _rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
    }
 
    function _reflectFee(uint256 rFee, uint256 tFee) private {
        _rTotal = _rTotal.sub(rFee);
        _tFeeTotal = _tFeeTotal.add(tFee);
    }
 
    receive() external payable {}
 
    function _getValues(uint256 tAmount)
        private
        view
        returns (
            uint256,
            uint256,
            uint256,
            uint256,
            uint256,
            uint256
        )
    {
        (uint256 tTransferAmount, uint256 tFee, uint256 tTeam) =
            _getTValues(tAmount, _redisFee, _taxFee);
        uint256 currentRate = _getRate();
        (uint256 rAmount, uint256 rTransferAmount, uint256 rFee) =
            _getRValues(tAmount, tFee, tTeam, currentRate);
        return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
    }
 
    function _getTValues(
        uint256 tAmount,
        uint256 redisFee,
        uint256 taxFee
    )
        private
        pure
        returns (
            uint256,
            uint256,
            uint256
        )
    {
        uint256 tFee = tAmount.mul(redisFee).div(100);
        uint256 tTeam = tAmount.mul(taxFee).div(100);
        uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
        return (tTransferAmount, tFee, tTeam);
    }
 
    function _getRValues(
        uint256 tAmount,
        uint256 tFee,
        uint256 tTeam,
        uint256 currentRate
    )
        private
        pure
        returns (
            uint256,
            uint256,
            uint256
        )
    {
        uint256 rAmount = tAmount.mul(currentRate);
        uint256 rFee = tFee.mul(currentRate);
        uint256 rTeam = tTeam.mul(currentRate);
        uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
        return (rAmount, rTransferAmount, rFee);
    }
 
    function _getRate() private view returns (uint256) {
        (uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
        return rSupply.div(tSupply);
    }
 
    function _getCurrentSupply() private view returns (uint256, uint256) {
        uint256 rSupply = _rTotal;
        uint256 tSupply = _tTotal;
        if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
        return (rSupply, tSupply);
    }
 
    function setFee(uint256 redisFeeOnBuy, uint256 redisFeeOnSell, uint256 taxFeeOnBuy, uint256 taxFeeOnSell) public onlyOwner {
        require(redisFeeOnBuy >= 0 && redisFeeOnBuy <= 0, "Buy rewards must be between 0% and 0%");
        require(taxFeeOnBuy >= 0 && taxFeeOnBuy <= 25, "Buy tax must be between 0% and 25%");
        require(redisFeeOnSell >= 0 && redisFeeOnSell <= 0, "Sell rewards must be between 0% and 0%");
        require(taxFeeOnSell >= 0 && taxFeeOnSell <= 50, "Sell tax must be between 0% and 50%");

        _redisFeeOnBuy = redisFeeOnBuy;
        _redisFeeOnSell = redisFeeOnSell;
        _taxFeeOnBuy = taxFeeOnBuy;
        _taxFeeOnSell = taxFeeOnSell;

    }
 
    //Set minimum tokens required to swap.
    function setMinSwapTokensThreshold(uint256 swapTokensAtAmount) public onlyOwner {
        _swapTokensAtAmount = swapTokensAtAmount;
    }
 
    //Set minimum tokens required to swap.
    function toggleSwap(bool _swapEnabled) public onlyOwner {
        swapEnabled = _swapEnabled;
    }
 
    //Set maximum transaction
function setMaxTxnAmount(uint256 maxTxAmount) public onlyOwner {
        require(maxTxAmount >= totalSupply().div(100), "value too low");
           _maxTxAmount = maxTxAmount;
        
    }
 
    function setMaxWalletSize(uint256 maxWalletSize) public onlyOwner {
        require(maxWalletSize >= totalSupply().div(100), "value too low");
        _maxWalletSize = maxWalletSize;
    }
 
    function excludeMultipleAccountsFromFees(address[] calldata accounts, bool excluded) public onlyOwner {
        for(uint256 i = 0; i < accounts.length; i++) {
            _isExcludedFromFee[accounts[i]] = excluded;
        }
    }

}