// SPDX-License-Identifier: MIT
pragma solidity 0.8.11;
import "@openzeppelin/contracts/access/Ownable.sol";
import "./utils/ReentrancyGuard.sol";
import "./markets/MarketRegistry.sol";
import "./SpecialTransferHelper.sol";
import "../../interfaces/markets/tokens/IERC20.sol";
import "../../interfaces/markets/tokens/IERC721.sol";
import "../../interfaces/markets/tokens/IERC1155.sol";
contract GemSwap is SpecialTransferHelper, Ownable, ReentrancyGuard {
    struct OpenseaTrades {
        uint256 value;
        bytes tradeData;
    }
    struct ERC20Details {
        address[] tokenAddrs;
        uint256[] amounts;
    }
    struct ERC1155Details {
        address tokenAddr;
        uint256[] ids;
        uint256[] amounts;
    }
    struct ConverstionDetails {
        bytes conversionData;
    }
    struct AffiliateDetails {
        address affiliate;
        bool isActive;
    }
    struct SponsoredMarket {
        uint256 marketId;
        bool isActive;
    }
    address public constant GOV = 0x83d841bC0450D5Ac35DCAd8d05Db53EbA29978c2;
    address public guardian;
    address public converter;
    address public punkProxy;
    uint256 public baseFees;
    bool public openForTrades;
    bool public openForFreeTrades;
    MarketRegistry public marketRegistry;
    AffiliateDetails[] public affiliates;
    SponsoredMarket[] public sponsoredMarkets;
    modifier isOpenForTrades() {
        require(openForTrades, "trades not allowed");
        _;
    }
    modifier isOpenForFreeTrades() {
        require(openForFreeTrades, "free trades not allowed");
        _;
    }
    constructor(address _marketRegistry, address _converter, address _guardian) {
        marketRegistry = MarketRegistry(_marketRegistry);
        converter = _converter;
        guardian = _guardian;
        baseFees = 0;
        openForTrades = true;
        openForFreeTrades = true;
        affiliates.push(AffiliateDetails(GOV, true));
    }
    function setUp() external onlyOwner {
        // Create CryptoPunk Proxy
        IWrappedPunk(0xb7F7F6C52F2e2fdb1963Eab30438024864c313F6).registerProxy();
        punkProxy = IWrappedPunk(0xb7F7F6C52F2e2fdb1963Eab30438024864c313F6).proxyInfo(address(this));
        // approve wrapped mooncats rescue to Acclimated​MoonCats contract
        IERC721(0x7C40c393DC0f283F318791d746d894DdD3693572).setApprovalForAll(0xc3f733ca98E0daD0386979Eb96fb1722A1A05E69, true);
    }
    // @audit This function is used to approve specific tokens to specific market contracts with high volume.
    // This is done in very rare cases for the gas optimization purposes. 
    function setOneTimeApproval(IERC20 token, address operator, uint256 amount) external onlyOwner {
        token.approve(operator, amount);
    }
    function updateGuardian(address _guardian) external onlyOwner {
        guardian = _guardian;
    }
    function addAffiliate(address _affiliate) external onlyOwner {
        affiliates.push(AffiliateDetails(_affiliate, true));
    }
    function updateAffiliate(uint256 _affiliateIndex, address _affiliate, bool _IsActive) external onlyOwner {
        affiliates[_affiliateIndex] = AffiliateDetails(_affiliate, _IsActive);
    }
    function addSponsoredMarket(uint256 _marketId) external onlyOwner {
        sponsoredMarkets.push(SponsoredMarket(_marketId, true));
    }
    function updateSponsoredMarket(uint256 _marketIndex, uint256 _marketId, bool _isActive) external onlyOwner {
        sponsoredMarkets[_marketIndex] = SponsoredMarket(_marketId, _isActive);
    }
    function setBaseFees(uint256 _baseFees) external onlyOwner {
        baseFees = _baseFees;
    }
    function setOpenForTrades(bool _openForTrades) external onlyOwner {
        openForTrades = _openForTrades;
    }
    function setOpenForFreeTrades(bool _openForFreeTrades) external onlyOwner {
        openForFreeTrades = _openForFreeTrades;
    }
    // @audit we will setup a system that will monitor the contract for any leftover
    // assets. In case any asset is leftover, the system should be able to trigger this
    // function to close all the trades until the leftover assets are rescued.
    function closeAllTrades() external {
        require(_msgSender() == guardian);
        openForTrades = false;
        openForFreeTrades = false;
    }
    function setConverter(address _converter) external onlyOwner {
        converter = _converter;
    }
    function setMarketRegistry(MarketRegistry _marketRegistry) external onlyOwner {
        marketRegistry = _marketRegistry;
    }
    function _transferEth(address _to, uint256 _amount) internal {
        bool callStatus;
        assembly {
            // Transfer the ETH and store if it succeeded or not.
            callStatus := call(gas(), _to, _amount, 0, 0, 0, 0)
        }
        require(callStatus, "_transferEth: Eth transfer failed");
    }
    function _collectFee(uint256[2] memory feeDetails) internal {
        require(feeDetails[1] >= baseFees, "Insufficient fee");
        if (feeDetails[1] > 0) {
            AffiliateDetails memory affiliateDetails = affiliates[feeDetails[0]];
            affiliateDetails.isActive
                ? _transferEth(affiliateDetails.affiliate, feeDetails[1])
                : _transferEth(GOV, feeDetails[1]);
        }
    }
    function _checkCallResult(bool _success) internal pure {
        if (!_success) {
            // Copy revert reason from call
            assembly {
                returndatacopy(0, 0, returndatasize())
                revert(0, returndatasize())
            }
        }
    }
    function _transferFromHelper(
        ERC20Details memory erc20Details,
        SpecialTransferHelper.ERC721Details[] memory erc721Details,
        ERC1155Details[] memory erc1155Details
    ) internal {
        // transfer ERC20 tokens from the sender to this contract
        for (uint256 i = 0; i < erc20Details.tokenAddrs.length; i++) {
            erc20Details.tokenAddrs[i].call(abi.encodeWithSelector(0x23b872dd, msg.sender, address(this), erc20Details.amounts[i]));
        }
        // transfer ERC721 tokens from the sender to this contract
        for (uint256 i = 0; i < erc721Details.length; i++) {
            // accept CryptoPunks
            if (erc721Details[i].tokenAddr == 0xb47e3cd837dDF8e4c57F05d70Ab865de6e193BBB) {
                _acceptCryptoPunk(erc721Details[i]);
            }
            // accept Mooncat
            else if (erc721Details[i].tokenAddr == 0x60cd862c9C687A9dE49aecdC3A99b74A4fc54aB6) {
                _acceptMoonCat(erc721Details[i]);
            }
            // default
            else {
                for (uint256 j = 0; j < erc721Details[i].ids.length; j++) {
                    IERC721(erc721Details[i].tokenAddr).transferFrom(
                        _msgSender(),
                        address(this),
                        erc721Details[i].ids[j]
                    );
                }
            }
        }
        // transfer ERC1155 tokens from the sender to this contract
        for (uint256 i = 0; i < erc1155Details.length; i++) {
            IERC1155(erc1155Details[i].tokenAddr).safeBatchTransferFrom(
                _msgSender(),
                address(this),
                erc1155Details[i].ids,
                erc1155Details[i].amounts,
                ""
            );
        }
    }
    function _conversionHelper(
        ConverstionDetails[] memory _converstionDetails
    ) internal {
        for (uint256 i = 0; i < _converstionDetails.length; i++) {
            // convert to desired asset
            (bool success, ) = converter.delegatecall(_converstionDetails[i].conversionData);
            // check if the call passed successfully
            _checkCallResult(success);
        }
    }
    function _trade(
        MarketRegistry.TradeDetails[] memory _tradeDetails
    ) internal {
        for (uint256 i = 0; i < _tradeDetails.length; i++) {
            // get market details
            (address _proxy, bool _isLib, bool _isActive) = marketRegistry.markets(_tradeDetails[i].marketId);
            // market should be active
            require(_isActive, "_trade: InActive Market");
            // execute trade
            if (_proxy == 0x7Be8076f4EA4A4AD08075C2508e481d6C946D12b || _proxy == 0x7f268357A8c2552623316e2562D90e642bB538E5) {
                _proxy.call{value:_tradeDetails[i].value}(_tradeDetails[i].tradeData);
            } else {
                (bool success, ) = _isLib
                    ? _proxy.delegatecall(_tradeDetails[i].tradeData)
                    : _proxy.call{value:_tradeDetails[i].value}(_tradeDetails[i].tradeData);
                // check if the call passed successfully
                _checkCallResult(success);
            }
        }
    }
    // function _tradeSponsored(
    //     MarketRegistry.TradeDetails[] memory _tradeDetails,
    //     uint256 sponsoredMarketId
    // ) internal returns (bool isSponsored) {
    //     for (uint256 i = 0; i < _tradeDetails.length; i++) {
    //         // check if the trade is for the sponsored market
    //         if (_tradeDetails[i].marketId == sponsoredMarketId) {
    //             isSponsored = true;
    //         }
    //         // get market details
    //         (address _proxy, bool _isLib, bool _isActive) = marketRegistry.markets(_tradeDetails[i].marketId);
    //         // market should be active
    //         require(_isActive, "_trade: InActive Market");
    //         // execute trade
    //         if (_proxy == 0x7Be8076f4EA4A4AD08075C2508e481d6C946D12b) {
    //             _proxy.call{value:_tradeDetails[i].value}(_tradeDetails[i].tradeData);
    //         } else {
    //             (bool success, ) = _isLib
    //                 ? _proxy.delegatecall(_tradeDetails[i].tradeData)
    //                 : _proxy.call{value:_tradeDetails[i].value}(_tradeDetails[i].tradeData);
    //             // check if the call passed successfully
    //             _checkCallResult(success);
    //         }
    //     }
    // }
    function _returnDust(address[] memory _tokens) internal {
        // return remaining ETH (if any)
        assembly {
            if gt(selfbalance(), 0) {
                let callStatus := call(
                    gas(),
                    caller(),
                    selfbalance(),
                    0,
                    0,
                    0,
                    0
                )
            }
        }
        // return remaining tokens (if any)
        for (uint256 i = 0; i < _tokens.length; i++) {
            if (IERC20(_tokens[i]).balanceOf(address(this)) > 0) {
                _tokens[i].call(abi.encodeWithSelector(0xa9059cbb, msg.sender, IERC20(_tokens[i]).balanceOf(address(this))));
            }
        }
    }
    function batchBuyFromOpenSea(
        OpenseaTrades[] memory openseaTrades
    ) payable external nonReentrant {
        // execute trades
        for (uint256 i = 0; i < openseaTrades.length; i++) {
            // execute trade
            address(0x7Be8076f4EA4A4AD08075C2508e481d6C946D12b).call{value:openseaTrades[i].value}(openseaTrades[i].tradeData);
        }
        // return remaining ETH (if any)
        assembly {
            if gt(selfbalance(), 0) {
                let callStatus := call(
                    gas(),
                    caller(),
                    selfbalance(),
                    0,
                    0,
                    0,
                    0
                )
            }
        }
    }
    
    function batchBuyWithETH(
        MarketRegistry.TradeDetails[] memory tradeDetails
    ) payable external nonReentrant {
        // execute trades
        _trade(tradeDetails);
        // return remaining ETH (if any)
        assembly {
            if gt(selfbalance(), 0) {
                let callStatus := call(
                    gas(),
                    caller(),
                    selfbalance(),
                    0,
                    0,
                    0,
                    0
                )
            }
        }
    }
    function batchBuyWithERC20s(
        ERC20Details memory erc20Details,
        MarketRegistry.TradeDetails[] memory tradeDetails,
        ConverstionDetails[] memory converstionDetails,
        address[] memory dustTokens
    ) payable external nonReentrant {
        // transfer ERC20 tokens from the sender to this contract
        for (uint256 i = 0; i < erc20Details.tokenAddrs.length; i++) {
            erc20Details.tokenAddrs[i].call(abi.encodeWithSelector(0x23b872dd, msg.sender, address(this), erc20Details.amounts[i]));
        }
        // Convert any assets if needed
        _conversionHelper(converstionDetails);
        // execute trades
        _trade(tradeDetails);
        // return dust tokens (if any)
        _returnDust(dustTokens);
    }
    // swaps any combination of ERC-20/721/1155
    // User needs to approve assets before invoking swap
    // WARNING: DO NOT SEND TOKENS TO THIS FUNCTION DIRECTLY!!!
    function multiAssetSwap(
        ERC20Details memory erc20Details,
        SpecialTransferHelper.ERC721Details[] memory erc721Details,
        ERC1155Details[] memory erc1155Details,
        ConverstionDetails[] memory converstionDetails,
        MarketRegistry.TradeDetails[] memory tradeDetails,
        address[] memory dustTokens,
        uint256[2] memory feeDetails    // [affiliateIndex, ETH fee in Wei]
    ) payable external isOpenForTrades nonReentrant {
        // collect fees
        _collectFee(feeDetails);
        // transfer all tokens
        _transferFromHelper(
            erc20Details,
            erc721Details,
            erc1155Details
        );
        // Convert any assets if needed
        _conversionHelper(converstionDetails);
        // execute trades
        _trade(tradeDetails);
        // return dust tokens (if any)
        _returnDust(dustTokens);
    }
    // Utility function that is used for free swaps for sponsored markets
    // WARNING: DO NOT SEND TOKENS TO THIS FUNCTION DIRECTLY!!! 
    // function multiAssetSwapWithoutFee(
    //     ERC20Details memory erc20Details,
    //     SpecialTransferHelper.ERC721Details[] memory erc721Details,
    //     ERC1155Details[] memory erc1155Details,
    //     ConverstionDetails[] memory converstionDetails,
    //     MarketRegistry.TradeDetails[] memory tradeDetails,
    //     address[] memory dustTokens,
    //     uint256 sponsoredMarketIndex
    // ) payable external isOpenForFreeTrades nonReentrant {
    //     // fetch the marketId of the sponsored market
    //     SponsoredMarket memory sponsoredMarket = sponsoredMarkets[sponsoredMarketIndex];
    //     // check if the market is active
    //     require(sponsoredMarket.isActive, "multiAssetSwapWithoutFee: InActive sponsored market");
// 
    //     // transfer all tokens
    //     _transferFromHelper(
    //         erc20Details,
    //         erc721Details,
    //         erc1155Details
    //     );
// 
    //     // Convert any assets if needed
    //     _conversionHelper(converstionDetails);
// 
    //     // execute trades
    //     bool isSponsored = _tradeSponsored(tradeDetails, sponsoredMarket.marketId);
// 
    //     // check if the trades include the sponsored market
    //     require(isSponsored, "multiAssetSwapWithoutFee: trades do not include sponsored market");
// 
    //     // return dust tokens (if any)
    //     _returnDust(dustTokens);
    // }
    function onERC1155Received(
        address,
        address,
        uint256,
        uint256,
        bytes calldata
    ) public virtual returns (bytes4) {
        return this.onERC1155Received.selector;
    }
    function onERC1155BatchReceived(
        address,
        address,
        uint256[] calldata,
        uint256[] calldata,
        bytes calldata
    ) public virtual returns (bytes4) {
        return this.onERC1155BatchReceived.selector;
    }
    function onERC721Received(
        address,
        address,
        uint256,
        bytes calldata
    ) external virtual returns (bytes4) {
        return 0x150b7a02;
    }
    // Used by ERC721BasicToken.sol
    function onERC721Received(
        address,
        uint256,
        bytes calldata
    ) external virtual returns (bytes4) {
        return 0xf0b9e5ba;
    }
    function supportsInterface(bytes4 interfaceId)
        external
        virtual
        view
        returns (bool)
    {
        return interfaceId == this.supportsInterface.selector;
    }
    receive() external payable {}
    // Emergency function: In case any ETH get stuck in the contract unintentionally
    // Only owner can retrieve the asset balance to a recipient address
    function rescueETH(address recipient) onlyOwner external {
        _transferEth(recipient, address(this).balance);
    }
    // Emergency function: In case any ERC20 tokens get stuck in the contract unintentionally
    // Only owner can retrieve the asset balance to a recipient address
    function rescueERC20(address asset, address recipient) onlyOwner external { 
        asset.call(abi.encodeWithSelector(0xa9059cbb, recipient, IERC20(asset).balanceOf(address(this))));
    }
    // Emergency function: In case any ERC721 tokens get stuck in the contract unintentionally
    // Only owner can retrieve the asset balance to a recipient address
    function rescueERC721(address asset, uint256[] calldata ids, address recipient) onlyOwner external {
        for (uint256 i = 0; i < ids.length; i++) {
            IERC721(asset).transferFrom(address(this), recipient, ids[i]);
        }
    }
    // Emergency function: In case any ERC1155 tokens get stuck in the contract unintentionally
    // Only owner can retrieve the asset balance to a recipient address
    function rescueERC1155(address asset, uint256[] calldata ids, uint256[] calldata amounts, address recipient) onlyOwner external {
        for (uint256 i = 0; i < ids.length; i++) {
            IERC1155(asset).safeTransferFrom(address(this), recipient, ids[i], amounts[i], "");
        }
    }
}// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _setOwner(_msgSender());
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _setOwner(address(0));
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _setOwner(newOwner);
    }
    function _setOwner(address newOwner) private {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.11;
/// @notice Gas optimized reentrancy protection for smart contracts.
/// @author Modified from OpenZeppelin (https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/security/ReentrancyGuard.sol)
abstract contract ReentrancyGuard {
    uint256 private reentrancyStatus = 1;
    modifier nonReentrant() {
        require(reentrancyStatus == 1, "REENTRANCY");
        reentrancyStatus = 2;
        _;
        reentrancyStatus = 1;
    }
}// SPDX-License-Identifier: MIT
pragma solidity 0.8.11;
import "@openzeppelin/contracts/access/Ownable.sol";
contract MarketRegistry is Ownable {
    struct TradeDetails {
        uint256 marketId;
        uint256 value;
        bytes tradeData;
    }
    struct Market {
        address proxy;
        bool isLib;
        bool isActive;
    }
    Market[] public markets;
    constructor(address[] memory proxies, bool[] memory isLibs) {
        for (uint256 i = 0; i < proxies.length; i++) {
            markets.push(Market(proxies[i], isLibs[i], true));
        }
    }
    function addMarket(address proxy, bool isLib) external onlyOwner {
        markets.push(Market(proxy, isLib, true));
    }
    function setMarketStatus(uint256 marketId, bool newStatus) external onlyOwner {
        Market storage market = markets[marketId];
        market.isActive = newStatus;
    }
    function setMarketProxy(uint256 marketId, address newProxy, bool isLib) external onlyOwner {
        Market storage market = markets[marketId];
        market.proxy = newProxy;
        market.isLib = isLib;
    }
}// SPDX-License-Identifier: MIT
pragma solidity 0.8.11;
import "@openzeppelin/contracts/utils/Context.sol";
import "../../interfaces/punks/ICryptoPunks.sol";
import "../../interfaces/punks/IWrappedPunk.sol";
import "../../interfaces/mooncats/IMoonCatsRescue.sol";
contract SpecialTransferHelper is Context {
    struct ERC721Details {
        address tokenAddr;
        address[] to;
        uint256[] ids;
    }
    function _uintToBytes5(uint256 id)
        internal
        pure
        returns (bytes5 slicedDataBytes5)
    {
        bytes memory _bytes = new bytes(32);
        assembly {
            mstore(add(_bytes, 32), id)
        }
        bytes memory tempBytes;
        assembly {
            // Get a location of some free memory and store it in tempBytes as
            // Solidity does for memory variables.
            tempBytes := mload(0x40)
            // The first word of the slice result is potentially a partial
            // word read from the original array. To read it, we calculate
            // the length of that partial word and start copying that many
            // bytes into the array. The first word we copy will start with
            // data we don't care about, but the last `lengthmod` bytes will
            // land at the beginning of the contents of the new array. When
            // we're done copying, we overwrite the full first word with
            // the actual length of the slice.
            let lengthmod := and(5, 31)
            // The multiplication in the next line is necessary
            // because when slicing multiples of 32 bytes (lengthmod == 0)
            // the following copy loop was copying the origin's length
            // and then ending prematurely not copying everything it should.
            let mc := add(add(tempBytes, lengthmod), mul(0x20, iszero(lengthmod)))
            let end := add(mc, 5)
            for {
                // The multiplication in the next line has the same exact purpose
                // as the one above.
                let cc := add(add(add(_bytes, lengthmod), mul(0x20, iszero(lengthmod))), 27)
            } lt(mc, end) {
                mc := add(mc, 0x20)
                cc := add(cc, 0x20)
            } {
                mstore(mc, mload(cc))
            }
            mstore(tempBytes, 5)
            //update free-memory pointer
            //allocating the array padded to 32 bytes like the compiler does now
            mstore(0x40, and(add(mc, 31), not(31)))
        }
        assembly {
            slicedDataBytes5 := mload(add(tempBytes, 32))
        }
    }
    function _acceptMoonCat(ERC721Details memory erc721Details) internal {
        for (uint256 i = 0; i < erc721Details.ids.length; i++) {
            bytes5 catId = _uintToBytes5(erc721Details.ids[i]);
            address owner = IMoonCatsRescue(erc721Details.tokenAddr).catOwners(catId);
            require(owner == _msgSender(), "_acceptMoonCat: invalid mooncat owner");
            IMoonCatsRescue(erc721Details.tokenAddr).acceptAdoptionOffer(catId);
        }
    }
    function _transferMoonCat(ERC721Details memory erc721Details) internal {
        for (uint256 i = 0; i < erc721Details.ids.length; i++) {
            IMoonCatsRescue(erc721Details.tokenAddr).giveCat(_uintToBytes5(erc721Details.ids[i]), erc721Details.to[i]);
        }
    }
    function _acceptCryptoPunk(ERC721Details memory erc721Details) internal {
        for (uint256 i = 0; i < erc721Details.ids.length; i++) {    
            address owner = ICryptoPunks(erc721Details.tokenAddr).punkIndexToAddress(erc721Details.ids[i]);
            require(owner == _msgSender(), "_acceptCryptoPunk: invalid punk owner");
            ICryptoPunks(erc721Details.tokenAddr).buyPunk(erc721Details.ids[i]);
        }
    }
    function _transferCryptoPunk(ERC721Details memory erc721Details) internal {
        for (uint256 i = 0; i < erc721Details.ids.length; i++) {
            ICryptoPunks(erc721Details.tokenAddr).transferPunk(erc721Details.to[i], erc721Details.ids[i]);
        }
    }
}// SPDX-License-Identifier: MIT
pragma solidity 0.8.11;
interface IERC20 {
    /**
        * @dev Returns the amount of tokens owned by `account`.
        */
    function balanceOf(address account) external view returns (uint256);
    /**
        * @dev Moves `amount` tokens from the caller's account to `recipient`.
        *
        * Returns a boolean value indicating whether the operation succeeded.
        *
        * Emits a {Transfer} event.
        */
    function transfer(address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
}// SPDX-License-Identifier: MIT
pragma solidity 0.8.11;
interface IERC721 {
    /// @notice Transfer ownership of an NFT -- THE CALLER IS RESPONSIBLE
    ///  TO CONFIRM THAT `_to` IS CAPABLE OF RECEIVING NFTS OR ELSE
    ///  THEY MAY BE PERMANENTLY LOST
    /// @dev Throws unless `msg.sender` is the current owner, an authorized
    ///  operator, or the approved address for this NFT. Throws if `_from` is
    ///  not the current owner. Throws if `_to` is the zero address. Throws if
    ///  `_tokenId` is not a valid NFT.
    /// @param _from The current owner of the NFT
    /// @param _to The new owner
    /// @param _tokenId The NFT to transfer
    function transferFrom(address _from, address _to, uint256 _tokenId) external payable;
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) external;
    
    function setApprovalForAll(address operator, bool approved) external;
    function approve(address to, uint256 tokenId) external;
    
    function isApprovedForAll(address owner, address operator) external view returns (bool);
    function balanceOf(address _owner) external view returns (uint256);
}// SPDX-License-Identifier: MIT
pragma solidity 0.8.11;
interface IERC1155 {
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) external;
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) external;
    function balanceOf(address _owner, uint256 _id) external view returns (uint256);
}// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.11;
interface ICryptoPunks {
    function punkIndexToAddress(uint index) external view returns(address owner);
    function offerPunkForSaleToAddress(uint punkIndex, uint minSalePriceInWei, address toAddress) external;
    function buyPunk(uint punkIndex) external payable;
    function transferPunk(address to, uint punkIndex) external;
}// SPDX-License-Identifier: MIT
pragma solidity 0.8.11;
interface IWrappedPunk {
    /**
     * @dev Mints a wrapped punk
     */
    function mint(uint256 punkIndex) external;
    /**
     * @dev Burns a specific wrapped punk
     */
    function burn(uint256 punkIndex) external;
    
    /**
     * @dev Registers proxy
     */
    function registerProxy() external;
    /**
     * @dev Gets proxy address
     */
    function proxyInfo(address user) external view returns (address);
}// SPDX-License-Identifier: MIT
pragma solidity 0.8.11;
interface IMoonCatsRescue {
    function acceptAdoptionOffer(bytes5 catId) payable external;
    function makeAdoptionOfferToAddress(bytes5 catId, uint price, address to) external;
    function giveCat(bytes5 catId, address to) external;
    function catOwners(bytes5 catId) external view returns(address);
    function rescueOrder(uint256 rescueIndex) external view returns(bytes5 catId);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/proxy/ERC1967/ERC1967Proxy.sol";
import "@openzeppelin/contracts/proxy/transparent/TransparentUpgradeableProxy.sol";
import "@openzeppelin/contracts/proxy/transparent/ProxyAdmin.sol";
// Kept for backwards compatibility with older versions of Hardhat and Truffle plugins.
contract AdminUpgradeabilityProxy is TransparentUpgradeableProxy {
    constructor(address logic, address admin, bytes memory data) payable TransparentUpgradeableProxy(logic, admin, data) {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../Proxy.sol";
import "./ERC1967Upgrade.sol";
/**
 * @dev This contract implements an upgradeable proxy. It is upgradeable because calls are delegated to an
 * implementation address that can be changed. This address is stored in storage in the location specified by
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967], so that it doesn't conflict with the storage layout of the
 * implementation behind the proxy.
 */
contract ERC1967Proxy is Proxy, ERC1967Upgrade {
    /**
     * @dev Initializes the upgradeable proxy with an initial implementation specified by `_logic`.
     *
     * If `_data` is nonempty, it's used as data in a delegate call to `_logic`. This will typically be an encoded
     * function call, and allows initializating the storage of the proxy like a Solidity constructor.
     */
    constructor(address _logic, bytes memory _data) payable {
        assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
        _upgradeToAndCall(_logic, _data, false);
    }
    /**
     * @dev Returns the current implementation address.
     */
    function _implementation() internal view virtual override returns (address impl) {
        return ERC1967Upgrade._getImplementation();
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC1967/ERC1967Proxy.sol";
/**
 * @dev This contract implements a proxy that is upgradeable by an admin.
 *
 * To avoid https://medium.com/nomic-labs-blog/malicious-backdoors-in-ethereum-proxies-62629adf3357[proxy selector
 * clashing], which can potentially be used in an attack, this contract uses the
 * https://blog.openzeppelin.com/the-transparent-proxy-pattern/[transparent proxy pattern]. This pattern implies two
 * things that go hand in hand:
 *
 * 1. If any account other than the admin calls the proxy, the call will be forwarded to the implementation, even if
 * that call matches one of the admin functions exposed by the proxy itself.
 * 2. If the admin calls the proxy, it can access the admin functions, but its calls will never be forwarded to the
 * implementation. If the admin tries to call a function on the implementation it will fail with an error that says
 * "admin cannot fallback to proxy target".
 *
 * These properties mean that the admin account can only be used for admin actions like upgrading the proxy or changing
 * the admin, so it's best if it's a dedicated account that is not used for anything else. This will avoid headaches due
 * to sudden errors when trying to call a function from the proxy implementation.
 *
 * Our recommendation is for the dedicated account to be an instance of the {ProxyAdmin} contract. If set up this way,
 * you should think of the `ProxyAdmin` instance as the real administrative interface of your proxy.
 */
contract TransparentUpgradeableProxy is ERC1967Proxy {
    /**
     * @dev Initializes an upgradeable proxy managed by `_admin`, backed by the implementation at `_logic`, and
     * optionally initialized with `_data` as explained in {ERC1967Proxy-constructor}.
     */
    constructor(address _logic, address admin_, bytes memory _data) payable ERC1967Proxy(_logic, _data) {
        assert(_ADMIN_SLOT == bytes32(uint256(keccak256("eip1967.proxy.admin")) - 1));
        _changeAdmin(admin_);
    }
    /**
     * @dev Modifier used internally that will delegate the call to the implementation unless the sender is the admin.
     */
    modifier ifAdmin() {
        if (msg.sender == _getAdmin()) {
            _;
        } else {
            _fallback();
        }
    }
    /**
     * @dev Returns the current admin.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyAdmin}.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`
     */
    function admin() external ifAdmin returns (address admin_) {
        admin_ = _getAdmin();
    }
    /**
     * @dev Returns the current implementation.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyImplementation}.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc`
     */
    function implementation() external ifAdmin returns (address implementation_) {
        implementation_ = _implementation();
    }
    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {AdminChanged} event.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-changeProxyAdmin}.
     */
    function changeAdmin(address newAdmin) external virtual ifAdmin {
        _changeAdmin(newAdmin);
    }
    /**
     * @dev Upgrade the implementation of the proxy.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgrade}.
     */
    function upgradeTo(address newImplementation) external ifAdmin {
        _upgradeToAndCall(newImplementation, bytes(""), false);
    }
    /**
     * @dev Upgrade the implementation of the proxy, and then call a function from the new implementation as specified
     * by `data`, which should be an encoded function call. This is useful to initialize new storage variables in the
     * proxied contract.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgradeAndCall}.
     */
    function upgradeToAndCall(address newImplementation, bytes calldata data) external payable ifAdmin {
        _upgradeToAndCall(newImplementation, data, true);
    }
    /**
     * @dev Returns the current admin.
     */
    function _admin() internal view virtual returns (address) {
        return _getAdmin();
    }
    /**
     * @dev Makes sure the admin cannot access the fallback function. See {Proxy-_beforeFallback}.
     */
    function _beforeFallback() internal virtual override {
        require(msg.sender != _getAdmin(), "TransparentUpgradeableProxy: admin cannot fallback to proxy target");
        super._beforeFallback();
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./TransparentUpgradeableProxy.sol";
import "../../access/Ownable.sol";
/**
 * @dev This is an auxiliary contract meant to be assigned as the admin of a {TransparentUpgradeableProxy}. For an
 * explanation of why you would want to use this see the documentation for {TransparentUpgradeableProxy}.
 */
contract ProxyAdmin is Ownable {
    /**
     * @dev Returns the current implementation of `proxy`.
     *
     * Requirements:
     *
     * - This contract must be the admin of `proxy`.
     */
    function getProxyImplementation(TransparentUpgradeableProxy proxy) public view virtual returns (address) {
        // We need to manually run the static call since the getter cannot be flagged as view
        // bytes4(keccak256("implementation()")) == 0x5c60da1b
        (bool success, bytes memory returndata) = address(proxy).staticcall(hex"5c60da1b");
        require(success);
        return abi.decode(returndata, (address));
    }
    /**
     * @dev Returns the current admin of `proxy`.
     *
     * Requirements:
     *
     * - This contract must be the admin of `proxy`.
     */
    function getProxyAdmin(TransparentUpgradeableProxy proxy) public view virtual returns (address) {
        // We need to manually run the static call since the getter cannot be flagged as view
        // bytes4(keccak256("admin()")) == 0xf851a440
        (bool success, bytes memory returndata) = address(proxy).staticcall(hex"f851a440");
        require(success);
        return abi.decode(returndata, (address));
    }
    /**
     * @dev Changes the admin of `proxy` to `newAdmin`.
     *
     * Requirements:
     *
     * - This contract must be the current admin of `proxy`.
     */
    function changeProxyAdmin(TransparentUpgradeableProxy proxy, address newAdmin) public virtual onlyOwner {
        proxy.changeAdmin(newAdmin);
    }
    /**
     * @dev Upgrades `proxy` to `implementation`. See {TransparentUpgradeableProxy-upgradeTo}.
     *
     * Requirements:
     *
     * - This contract must be the admin of `proxy`.
     */
    function upgrade(TransparentUpgradeableProxy proxy, address implementation) public virtual onlyOwner {
        proxy.upgradeTo(implementation);
    }
    /**
     * @dev Upgrades `proxy` to `implementation` and calls a function on the new implementation. See
     * {TransparentUpgradeableProxy-upgradeToAndCall}.
     *
     * Requirements:
     *
     * - This contract must be the admin of `proxy`.
     */
    function upgradeAndCall(TransparentUpgradeableProxy proxy, address implementation, bytes memory data) public payable virtual onlyOwner {
        proxy.upgradeToAndCall{value: msg.value}(implementation, data);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
 * instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
 * be specified by overriding the virtual {_implementation} function.
 *
 * Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
 * different contract through the {_delegate} function.
 *
 * The success and return data of the delegated call will be returned back to the caller of the proxy.
 */
abstract contract Proxy {
    /**
     * @dev Delegates the current call to `implementation`.
     *
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _delegate(address implementation) internal virtual {
        // solhint-disable-next-line no-inline-assembly
        assembly {
            // Copy msg.data. We take full control of memory in this inline assembly
            // block because it will not return to Solidity code. We overwrite the
            // Solidity scratch pad at memory position 0.
            calldatacopy(0, 0, calldatasize())
            // Call the implementation.
            // out and outsize are 0 because we don't know the size yet.
            let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
            // Copy the returned data.
            returndatacopy(0, 0, returndatasize())
            switch result
            // delegatecall returns 0 on error.
            case 0 { revert(0, returndatasize()) }
            default { return(0, returndatasize()) }
        }
    }
    /**
     * @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
     * and {_fallback} should delegate.
     */
    function _implementation() internal view virtual returns (address);
    /**
     * @dev Delegates the current call to the address returned by `_implementation()`.
     *
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _fallback() internal virtual {
        _beforeFallback();
        _delegate(_implementation());
    }
    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
     * function in the contract matches the call data.
     */
    fallback () external payable virtual {
        _fallback();
    }
    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
     * is empty.
     */
    receive () external payable virtual {
        _fallback();
    }
    /**
     * @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
     * call, or as part of the Solidity `fallback` or `receive` functions.
     *
     * If overriden should call `super._beforeFallback()`.
     */
    function _beforeFallback() internal virtual {
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.2;
import "../beacon/IBeacon.sol";
import "../../utils/Address.sol";
import "../../utils/StorageSlot.sol";
/**
 * @dev This abstract contract provides getters and event emitting update functions for
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967] slots.
 *
 * _Available since v4.1._
 *
 * @custom:oz-upgrades-unsafe-allow delegatecall
 */
abstract contract ERC1967Upgrade {
    // This is the keccak-256 hash of "eip1967.proxy.rollback" subtracted by 1
    bytes32 private constant _ROLLBACK_SLOT = 0x4910fdfa16fed3260ed0e7147f7cc6da11a60208b5b9406d12a635614ffd9143;
    /**
     * @dev Storage slot with the address of the current implementation.
     * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
    /**
     * @dev Emitted when the implementation is upgraded.
     */
    event Upgraded(address indexed implementation);
    /**
     * @dev Returns the current implementation address.
     */
    function _getImplementation() internal view returns (address) {
        return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
    }
    /**
     * @dev Stores a new address in the EIP1967 implementation slot.
     */
    function _setImplementation(address newImplementation) private {
        require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
        StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
    }
    /**
     * @dev Perform implementation upgrade
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeTo(address newImplementation) internal {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
    }
    /**
     * @dev Perform implementation upgrade with additional setup call.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeToAndCall(address newImplementation, bytes memory data, bool forceCall) internal {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(newImplementation, data);
        }
    }
    /**
     * @dev Perform implementation upgrade with security checks for UUPS proxies, and additional setup call.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeToAndCallSecure(address newImplementation, bytes memory data, bool forceCall) internal {
        address oldImplementation = _getImplementation();
        // Initial upgrade and setup call
        _setImplementation(newImplementation);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(newImplementation, data);
        }
        // Perform rollback test if not already in progress
        StorageSlot.BooleanSlot storage rollbackTesting = StorageSlot.getBooleanSlot(_ROLLBACK_SLOT);
        if (!rollbackTesting.value) {
            // Trigger rollback using upgradeTo from the new implementation
            rollbackTesting.value = true;
            Address.functionDelegateCall(
                newImplementation,
                abi.encodeWithSignature(
                    "upgradeTo(address)",
                    oldImplementation
                )
            );
            rollbackTesting.value = false;
            // Check rollback was effective
            require(oldImplementation == _getImplementation(), "ERC1967Upgrade: upgrade breaks further upgrades");
            // Finally reset to the new implementation and log the upgrade
            _setImplementation(newImplementation);
            emit Upgraded(newImplementation);
        }
    }
    /**
     * @dev Perform beacon upgrade with additional setup call. Note: This upgrades the address of the beacon, it does
     * not upgrade the implementation contained in the beacon (see {UpgradeableBeacon-_setImplementation} for that).
     *
     * Emits a {BeaconUpgraded} event.
     */
    function _upgradeBeaconToAndCall(address newBeacon, bytes memory data, bool forceCall) internal {
        _setBeacon(newBeacon);
        emit BeaconUpgraded(newBeacon);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);
        }
    }
    /**
     * @dev Storage slot with the admin of the contract.
     * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 internal constant _ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
    /**
     * @dev Emitted when the admin account has changed.
     */
    event AdminChanged(address previousAdmin, address newAdmin);
    /**
     * @dev Returns the current admin.
     */
    function _getAdmin() internal view returns (address) {
        return StorageSlot.getAddressSlot(_ADMIN_SLOT).value;
    }
    /**
     * @dev Stores a new address in the EIP1967 admin slot.
     */
    function _setAdmin(address newAdmin) private {
        require(newAdmin != address(0), "ERC1967: new admin is the zero address");
        StorageSlot.getAddressSlot(_ADMIN_SLOT).value = newAdmin;
    }
    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {AdminChanged} event.
     */
    function _changeAdmin(address newAdmin) internal {
        emit AdminChanged(_getAdmin(), newAdmin);
        _setAdmin(newAdmin);
    }
    /**
     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.
     * This is bytes32(uint256(keccak256('eip1967.proxy.beacon')) - 1)) and is validated in the constructor.
     */
    bytes32 internal constant _BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;
    /**
     * @dev Emitted when the beacon is upgraded.
     */
    event BeaconUpgraded(address indexed beacon);
    /**
     * @dev Returns the current beacon.
     */
    function _getBeacon() internal view returns (address) {
        return StorageSlot.getAddressSlot(_BEACON_SLOT).value;
    }
    /**
     * @dev Stores a new beacon in the EIP1967 beacon slot.
     */
    function _setBeacon(address newBeacon) private {
        require(
            Address.isContract(newBeacon),
            "ERC1967: new beacon is not a contract"
        );
        require(
            Address.isContract(IBeacon(newBeacon).implementation()),
            "ERC1967: beacon implementation is not a contract"
        );
        StorageSlot.getAddressSlot(_BEACON_SLOT).value = newBeacon;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @dev This is the interface that {BeaconProxy} expects of its beacon.
 */
interface IBeacon {
    /**
     * @dev Must return an address that can be used as a delegate call target.
     *
     * {BeaconProxy} will check that this address is a contract.
     */
    function implementation() external view returns (address);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.
        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 *
 * _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }
    struct BooleanSlot {
        bool value;
    }
    struct Bytes32Slot {
        bytes32 value;
    }
    struct Uint256Slot {
        uint256 value;
    }
    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        assembly {
            r.slot := slot
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes calldata) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC1967/ERC1967Upgrade.sol";
/**
 * @dev Base contract for building openzeppelin-upgrades compatible implementations for the {ERC1967Proxy}. It includes
 * publicly available upgrade functions that are called by the plugin and by the secure upgrade mechanism to verify
 * continuation of the upgradability.
 *
 * The {_authorizeUpgrade} function MUST be overridden to include access restriction to the upgrade mechanism.
 *
 * _Available since v4.1._
 */
abstract contract UUPSUpgradeable is ERC1967Upgrade {
    function upgradeTo(address newImplementation) external virtual {
        _authorizeUpgrade(newImplementation);
        _upgradeToAndCallSecure(newImplementation, bytes(""), false);
    }
    function upgradeToAndCall(address newImplementation, bytes memory data) external payable virtual {
        _authorizeUpgrade(newImplementation);
        _upgradeToAndCallSecure(newImplementation, data, true);
    }
    function _authorizeUpgrade(address newImplementation) internal virtual;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.2;
import "@openzeppelin/contracts/proxy/utils/UUPSUpgradeable.sol";
abstract contract Proxiable is UUPSUpgradeable {
    function _authorizeUpgrade(address newImplementation) internal override {
        _beforeUpgrade(newImplementation);
    }
    function _beforeUpgrade(address newImplementation) internal virtual;
}
contract ChildOfProxiable is Proxiable {
    function _beforeUpgrade(address newImplementation) internal virtual override {}
}

// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.0;
pragma abicoder v2;
import './IDelegate.sol';
import './IWETHUpgradable.sol';
import './MarketConsts.sol';
import '@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol';
import '@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol';
import '@openzeppelin/contracts-upgradeable/security/PausableUpgradeable.sol';
import '@openzeppelin/contracts-upgradeable/security/ReentrancyGuardUpgradeable.sol';
import '@openzeppelin/contracts-upgradeable/token/ERC20/utils/SafeERC20Upgradeable.sol';
import '@openzeppelin/contracts/utils/cryptography/ECDSA.sol';
interface IX2Y2Run {
    function run1(
        Market.Order memory order,
        Market.SettleShared memory shared,
        Market.SettleDetail memory detail
    ) external returns (uint256);
}
contract X2Y2_r1 is
    Initializable,
    ReentrancyGuardUpgradeable,
    OwnableUpgradeable,
    PausableUpgradeable,
    IX2Y2Run
{
    using SafeERC20Upgradeable for IERC20Upgradeable;
    event EvProfit(bytes32 itemHash, address currency, address to, uint256 amount);
    event EvAuctionRefund(
        bytes32 indexed itemHash,
        address currency,
        address to,
        uint256 amount,
        uint256 incentive
    );
    event EvInventory(
        bytes32 indexed itemHash,
        address maker,
        address taker,
        uint256 orderSalt,
        uint256 settleSalt,
        uint256 intent,
        uint256 delegateType,
        uint256 deadline,
        IERC20Upgradeable currency,
        bytes dataMask,
        Market.OrderItem item,
        Market.SettleDetail detail
    );
    event EvSigner(address signer, bool isRemoval);
    event EvDelegate(address delegate, bool isRemoval);
    event EvFeeCapUpdate(uint256 newValue);
    event EvCancel(bytes32 indexed itemHash);
    event EvFailure(uint256 index, bytes error);
    mapping(address => bool) public delegates;
    mapping(address => bool) public signers;
    mapping(bytes32 => Market.InvStatus) public inventoryStatus;
    mapping(bytes32 => Market.OngoingAuction) public ongoingAuctions;
    uint256 public constant RATE_BASE = 1e6;
    uint256 public feeCapPct;
    IWETHUpgradable public weth;
    receive() external payable {}
    function pause() public onlyOwner {
        _pause();
    }
    function unpause() public onlyOwner {
        _unpause();
    }
    function initialize(uint256 feeCapPct_, address weth_) public initializer {
        feeCapPct = feeCapPct_;
        weth = IWETHUpgradable(weth_);
        __ReentrancyGuard_init_unchained();
        __Pausable_init_unchained();
        __Ownable_init_unchained();
    }
    function updateFeeCap(uint256 val) public virtual onlyOwner {
        feeCapPct = val;
        emit EvFeeCapUpdate(val);
    }
    function updateSigners(address[] memory toAdd, address[] memory toRemove)
        public
        virtual
        onlyOwner
    {
        for (uint256 i = 0; i < toAdd.length; i++) {
            signers[toAdd[i]] = true;
            emit EvSigner(toAdd[i], false);
        }
        for (uint256 i = 0; i < toRemove.length; i++) {
            delete signers[toRemove[i]];
            emit EvSigner(toRemove[i], true);
        }
    }
    function updateDelegates(address[] memory toAdd, address[] memory toRemove)
        public
        virtual
        onlyOwner
    {
        for (uint256 i = 0; i < toAdd.length; i++) {
            delegates[toAdd[i]] = true;
            emit EvDelegate(toAdd[i], false);
        }
        for (uint256 i = 0; i < toRemove.length; i++) {
            delete delegates[toRemove[i]];
            emit EvDelegate(toRemove[i], true);
        }
    }
    function cancel(
        bytes32[] memory itemHashes,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual nonReentrant whenNotPaused {
        require(deadline > block.timestamp, 'deadline reached');
        bytes32 hash = keccak256(abi.encode(itemHashes.length, itemHashes, deadline));
        address signer = ECDSA.recover(hash, v, r, s);
        require(signers[signer], 'Input signature error');
        for (uint256 i = 0; i < itemHashes.length; i++) {
            bytes32 h = itemHashes[i];
            if (inventoryStatus[h] == Market.InvStatus.NEW) {
                inventoryStatus[h] = Market.InvStatus.CANCELLED;
                emit EvCancel(h);
            }
        }
    }
    function run(Market.RunInput memory input) public payable virtual nonReentrant whenNotPaused {
        require(input.shared.deadline > block.timestamp, 'input deadline reached');
        require(msg.sender == input.shared.user, 'sender does not match');
        _verifyInputSignature(input);
        uint256 amountEth = msg.value;
        if (input.shared.amountToWeth > 0) {
            uint256 amt = input.shared.amountToWeth;
            weth.deposit{value: amt}();
            SafeERC20Upgradeable.safeTransfer(weth, msg.sender, amt);
            amountEth -= amt;
        }
        if (input.shared.amountToEth > 0) {
            uint256 amt = input.shared.amountToEth;
            SafeERC20Upgradeable.safeTransferFrom(weth, msg.sender, address(this), amt);
            weth.withdraw(amt);
            amountEth += amt;
        }
        for (uint256 i = 0; i < input.orders.length; i++) {
            _verifyOrderSignature(input.orders[i]);
        }
        for (uint256 i = 0; i < input.details.length; i++) {
            Market.SettleDetail memory detail = input.details[i];
            Market.Order memory order = input.orders[detail.orderIdx];
            if (input.shared.canFail) {
                try IX2Y2Run(address(this)).run1(order, input.shared, detail) returns (
                    uint256 ethPayment
                ) {
                    amountEth -= ethPayment;
                } catch Error(string memory _err) {
                    emit EvFailure(i, bytes(_err));
                } catch (bytes memory _err) {
                    emit EvFailure(i, _err);
                }
            } else {
                amountEth -= _run(order, input.shared, detail);
            }
        }
        if (amountEth > 0) {
            payable(msg.sender).transfer(amountEth);
        }
    }
    function run1(
        Market.Order memory order,
        Market.SettleShared memory shared,
        Market.SettleDetail memory detail
    ) external virtual returns (uint256) {
        require(msg.sender == address(this), 'unsafe call');
        return _run(order, shared, detail);
    }
    function _hashItem(Market.Order memory order, Market.OrderItem memory item)
        internal
        view
        virtual
        returns (bytes32)
    {
        return
            keccak256(
                abi.encode(
                    order.salt,
                    order.user,
                    order.network,
                    order.intent,
                    order.delegateType,
                    order.deadline,
                    order.currency,
                    order.dataMask,
                    item
                )
            );
    }
    function _emitInventory(
        bytes32 itemHash,
        Market.Order memory order,
        Market.OrderItem memory item,
        Market.SettleShared memory shared,
        Market.SettleDetail memory detail
    ) internal virtual {
        emit EvInventory(
            itemHash,
            order.user,
            shared.user,
            order.salt,
            shared.salt,
            order.intent,
            order.delegateType,
            order.deadline,
            order.currency,
            order.dataMask,
            item,
            detail
        );
    }
    function _run(
        Market.Order memory order,
        Market.SettleShared memory shared,
        Market.SettleDetail memory detail
    ) internal virtual returns (uint256) {
        uint256 nativeAmount = 0;
        Market.OrderItem memory item = order.items[detail.itemIdx];
        bytes32 itemHash = _hashItem(order, item);
        {
            require(itemHash == detail.itemHash, 'item hash does not match');
            require(order.network == block.chainid, 'wrong network');
            require(
                address(detail.executionDelegate) != address(0) &&
                    delegates[address(detail.executionDelegate)],
                'unknown delegate'
            );
        }
        bytes memory data = item.data;
        {
            if (order.dataMask.length > 0 && detail.dataReplacement.length > 0) {
                _arrayReplace(data, detail.dataReplacement, order.dataMask);
            }
        }
        if (detail.op == Market.Op.COMPLETE_SELL_OFFER) {
            require(inventoryStatus[itemHash] == Market.InvStatus.NEW, 'order already exists');
            require(order.intent == Market.INTENT_SELL, 'intent != sell');
            _assertDelegation(order, detail);
            require(order.deadline > block.timestamp, 'deadline reached');
            require(detail.price >= item.price, 'underpaid');
            nativeAmount = _takePayment(itemHash, order.currency, shared.user, detail.price);
            require(
                detail.executionDelegate.executeSell(order.user, shared.user, data),
                'delegation error'
            );
            _distributeFeeAndProfit(
                itemHash,
                order.user,
                order.currency,
                detail,
                detail.price,
                detail.price
            );
            inventoryStatus[itemHash] = Market.InvStatus.COMPLETE;
        } else if (detail.op == Market.Op.COMPLETE_BUY_OFFER) {
            require(inventoryStatus[itemHash] == Market.InvStatus.NEW, 'order already exists');
            require(order.intent == Market.INTENT_BUY, 'intent != buy');
            _assertDelegation(order, detail);
            require(order.deadline > block.timestamp, 'deadline reached');
            require(item.price == detail.price, 'price not match');
            require(!_isNative(order.currency), 'native token not supported');
            nativeAmount = _takePayment(itemHash, order.currency, order.user, detail.price);
            require(
                detail.executionDelegate.executeBuy(shared.user, order.user, data),
                'delegation error'
            );
            _distributeFeeAndProfit(
                itemHash,
                shared.user,
                order.currency,
                detail,
                detail.price,
                detail.price
            );
            inventoryStatus[itemHash] = Market.InvStatus.COMPLETE;
        } else if (detail.op == Market.Op.CANCEL_OFFER) {
            require(inventoryStatus[itemHash] == Market.InvStatus.NEW, 'unable to cancel');
            require(order.deadline > block.timestamp, 'deadline reached');
            inventoryStatus[itemHash] = Market.InvStatus.CANCELLED;
            emit EvCancel(itemHash);
        } else if (detail.op == Market.Op.BID) {
            require(order.intent == Market.INTENT_AUCTION, 'intent != auction');
            _assertDelegation(order, detail);
            bool firstBid = false;
            if (ongoingAuctions[itemHash].bidder == address(0)) {
                require(inventoryStatus[itemHash] == Market.InvStatus.NEW, 'order already exists');
                require(order.deadline > block.timestamp, 'auction ended');
                require(detail.price >= item.price, 'underpaid');
                firstBid = true;
                ongoingAuctions[itemHash] = Market.OngoingAuction({
                    price: detail.price,
                    netPrice: detail.price,
                    bidder: shared.user,
                    endAt: order.deadline
                });
                inventoryStatus[itemHash] = Market.InvStatus.AUCTION;
                require(
                    detail.executionDelegate.executeBid(order.user, address(0), shared.user, data),
                    'delegation error'
                );
            }
            Market.OngoingAuction storage auc = ongoingAuctions[itemHash];
            require(auc.endAt > block.timestamp, 'auction ended');
            nativeAmount = _takePayment(itemHash, order.currency, shared.user, detail.price);
            if (!firstBid) {
                require(
                    inventoryStatus[itemHash] == Market.InvStatus.AUCTION,
                    'order is not auction'
                );
                require(
                    detail.price - auc.price >= (auc.price * detail.aucMinIncrementPct) / RATE_BASE,
                    'underbid'
                );
                uint256 bidRefund = auc.netPrice;
                uint256 incentive = (detail.price * detail.bidIncentivePct) / RATE_BASE;
                if (bidRefund + incentive > 0) {
                    _transferTo(order.currency, auc.bidder, bidRefund + incentive);
                    emit EvAuctionRefund(
                        itemHash,
                        address(order.currency),
                        auc.bidder,
                        bidRefund,
                        incentive
                    );
                }
                require(
                    detail.executionDelegate.executeBid(order.user, auc.bidder, shared.user, data),
                    'delegation error'
                );
                auc.price = detail.price;
                auc.netPrice = detail.price - incentive;
                auc.bidder = shared.user;
            }
            if (block.timestamp + detail.aucIncDurationSecs > auc.endAt) {
                auc.endAt += detail.aucIncDurationSecs;
            }
        } else if (
            detail.op == Market.Op.REFUND_AUCTION ||
            detail.op == Market.Op.REFUND_AUCTION_STUCK_ITEM
        ) {
            require(
                inventoryStatus[itemHash] == Market.InvStatus.AUCTION,
                'cannot cancel non-auction order'
            );
            Market.OngoingAuction storage auc = ongoingAuctions[itemHash];
            if (auc.netPrice > 0) {
                _transferTo(order.currency, auc.bidder, auc.netPrice);
                emit EvAuctionRefund(
                    itemHash,
                    address(order.currency),
                    auc.bidder,
                    auc.netPrice,
                    0
                );
            }
            _assertDelegation(order, detail);
            if (detail.op == Market.Op.REFUND_AUCTION) {
                require(
                    detail.executionDelegate.executeAuctionRefund(order.user, auc.bidder, data),
                    'delegation error'
                );
            }
            delete ongoingAuctions[itemHash];
            inventoryStatus[itemHash] = Market.InvStatus.REFUNDED;
        } else if (detail.op == Market.Op.COMPLETE_AUCTION) {
            require(
                inventoryStatus[itemHash] == Market.InvStatus.AUCTION,
                'cannot complete non-auction order'
            );
            _assertDelegation(order, detail);
            Market.OngoingAuction storage auc = ongoingAuctions[itemHash];
            require(block.timestamp >= auc.endAt, 'auction not finished yet');
            require(
                detail.executionDelegate.executeAuctionComplete(order.user, auc.bidder, data),
                'delegation error'
            );
            _distributeFeeAndProfit(
                itemHash,
                order.user,
                order.currency,
                detail,
                auc.price,
                auc.netPrice
            );
            inventoryStatus[itemHash] = Market.InvStatus.COMPLETE;
            delete ongoingAuctions[itemHash];
        } else {
            revert('unknown op');
        }
        _emitInventory(itemHash, order, item, shared, detail);
        return nativeAmount;
    }
    function _assertDelegation(Market.Order memory order, Market.SettleDetail memory detail)
        internal
        view
        virtual
    {
        require(
            detail.executionDelegate.delegateType() == order.delegateType,
            'delegation type error'
        );
    }
    // modifies `src`
    function _arrayReplace(
        bytes memory src,
        bytes memory replacement,
        bytes memory mask
    ) internal view virtual {
        require(src.length == replacement.length);
        require(src.length == mask.length);
        for (uint256 i = 0; i < src.length; i++) {
            if (mask[i] != 0) {
                src[i] = replacement[i];
            }
        }
    }
    function _verifyInputSignature(Market.RunInput memory input) internal view virtual {
        bytes32 hash = keccak256(abi.encode(input.shared, input.details.length, input.details));
        address signer = ECDSA.recover(hash, input.v, input.r, input.s);
        require(signers[signer], 'Input signature error');
    }
    function _verifyOrderSignature(Market.Order memory order) internal view virtual {
        address orderSigner;
        if (order.signVersion == Market.SIGN_V1) {
            bytes32 orderHash = keccak256(
                abi.encode(
                    order.salt,
                    order.user,
                    order.network,
                    order.intent,
                    order.delegateType,
                    order.deadline,
                    order.currency,
                    order.dataMask,
                    order.items.length,
                    order.items
                )
            );
            orderSigner = ECDSA.recover(
                ECDSA.toEthSignedMessageHash(orderHash),
                order.v,
                order.r,
                order.s
            );
        } else {
            revert('unknown signature version');
        }
        require(orderSigner == order.user, 'Order signature does not match');
    }
    function _isNative(IERC20Upgradeable currency) internal view virtual returns (bool) {
        return address(currency) == address(0);
    }
    function _takePayment(
        bytes32 itemHash,
        IERC20Upgradeable currency,
        address from,
        uint256 amount
    ) internal virtual returns (uint256) {
        if (amount > 0) {
            if (_isNative(currency)) {
                return amount;
            } else {
                currency.safeTransferFrom(from, address(this), amount);
            }
        }
        return 0;
    }
    function _transferTo(
        IERC20Upgradeable currency,
        address to,
        uint256 amount
    ) internal virtual {
        if (amount > 0) {
            if (_isNative(currency)) {
                AddressUpgradeable.sendValue(payable(to), amount);
            } else {
                currency.safeTransfer(to, amount);
            }
        }
    }
    function _distributeFeeAndProfit(
        bytes32 itemHash,
        address seller,
        IERC20Upgradeable currency,
        Market.SettleDetail memory sd,
        uint256 price,
        uint256 netPrice
    ) internal virtual {
        require(price >= netPrice, 'price error');
        uint256 payment = netPrice;
        uint256 totalFeePct;
        for (uint256 i = 0; i < sd.fees.length; i++) {
            Market.Fee memory fee = sd.fees[i];
            totalFeePct += fee.percentage;
            uint256 amount = (price * fee.percentage) / RATE_BASE;
            payment -= amount;
            _transferTo(currency, fee.to, amount);
        }
        require(feeCapPct >= totalFeePct, 'total fee cap exceeded');
        _transferTo(currency, seller, payment);
        emit EvProfit(itemHash, address(currency), seller, payment);
    }
}
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.0;
pragma abicoder v2;
interface IDelegate {
    function delegateType() external view returns (uint256);
    function executeSell(
        address seller,
        address buyer,
        bytes calldata data
    ) external returns (bool);
    function executeBuy(
        address seller,
        address buyer,
        bytes calldata data
    ) external returns (bool);
    function executeBid(
        address seller,
        address previousBidder,
        address bidder,
        bytes calldata data
    ) external returns (bool);
    function executeAuctionComplete(
        address seller,
        address buyer,
        bytes calldata data
    ) external returns (bool);
    function executeAuctionRefund(
        address seller,
        address lastBidder,
        bytes calldata data
    ) external returns (bool);
}
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.0;
pragma abicoder v2;
import '@openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol';
interface IWETHUpgradable is IERC20Upgradeable {
    function deposit() external payable;
    function withdraw(uint256 wad) external;
}
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.0;
pragma abicoder v2;
import './IDelegate.sol';
import './IWETHUpgradable.sol';
library Market {
    uint256 constant INTENT_SELL = 1;
    uint256 constant INTENT_AUCTION = 2;
    uint256 constant INTENT_BUY = 3;
    uint8 constant SIGN_V1 = 1;
    uint8 constant SIGN_V3 = 3;
    struct OrderItem {
        uint256 price;
        bytes data;
    }
    struct Order {
        uint256 salt;
        address user;
        uint256 network;
        uint256 intent;
        uint256 delegateType;
        uint256 deadline;
        IERC20Upgradeable currency;
        bytes dataMask;
        OrderItem[] items;
        // signature
        bytes32 r;
        bytes32 s;
        uint8 v;
        uint8 signVersion;
    }
    struct Fee {
        uint256 percentage;
        address to;
    }
    struct SettleDetail {
        Market.Op op;
        uint256 orderIdx;
        uint256 itemIdx;
        uint256 price;
        bytes32 itemHash;
        IDelegate executionDelegate;
        bytes dataReplacement;
        uint256 bidIncentivePct;
        uint256 aucMinIncrementPct;
        uint256 aucIncDurationSecs;
        Fee[] fees;
    }
    struct SettleShared {
        uint256 salt;
        uint256 deadline;
        uint256 amountToEth;
        uint256 amountToWeth;
        address user;
        bool canFail;
    }
    struct RunInput {
        Order[] orders;
        SettleDetail[] details;
        SettleShared shared;
        // signature
        bytes32 r;
        bytes32 s;
        uint8 v;
    }
    struct OngoingAuction {
        uint256 price;
        uint256 netPrice;
        uint256 endAt;
        address bidder;
    }
    enum InvStatus {
        NEW,
        AUCTION,
        COMPLETE,
        CANCELLED,
        REFUNDED
    }
    enum Op {
        INVALID,
        // off-chain
        COMPLETE_SELL_OFFER,
        COMPLETE_BUY_OFFER,
        CANCEL_OFFER,
        // auction
        BID,
        COMPLETE_AUCTION,
        REFUND_AUCTION,
        REFUND_AUCTION_STUCK_ITEM
    }
    enum DelegationType {
        INVALID,
        ERC721,
        ERC1155
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    function __Ownable_init() internal onlyInitializing {
        __Context_init_unchained();
        __Ownable_init_unchained();
    }
    function __Ownable_init_unchained() internal onlyInitializing {
        _transferOwnership(_msgSender());
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
    uint256[49] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/utils/Initializable.sol)
pragma solidity ^0.8.0;
import "../../utils/AddressUpgradeable.sol";
/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since a proxied contract can't have a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To initialize the implementation contract, you can either invoke the
 * initializer manually, or you can include a constructor to automatically mark it as initialized when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() initializer {}
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     */
    bool private _initialized;
    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;
    /**
     * @dev Modifier to protect an initializer function from being invoked twice.
     */
    modifier initializer() {
        // If the contract is initializing we ignore whether _initialized is set in order to support multiple
        // inheritance patterns, but we only do this in the context of a constructor, because in other contexts the
        // contract may have been reentered.
        require(_initializing ? _isConstructor() : !_initialized, "Initializable: contract is already initialized");
        bool isTopLevelCall = !_initializing;
        if (isTopLevelCall) {
            _initializing = true;
            _initialized = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
        }
    }
    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} modifier, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }
    function _isConstructor() private view returns (bool) {
        return !AddressUpgradeable.isContract(address(this));
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/Pausable.sol)
pragma solidity ^0.8.0;
import "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";
/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract PausableUpgradeable is Initializable, ContextUpgradeable {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);
    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);
    bool private _paused;
    /**
     * @dev Initializes the contract in unpaused state.
     */
    function __Pausable_init() internal onlyInitializing {
        __Context_init_unchained();
        __Pausable_init_unchained();
    }
    function __Pausable_init_unchained() internal onlyInitializing {
        _paused = false;
    }
    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }
    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        require(!paused(), "Pausable: paused");
        _;
    }
    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        require(paused(), "Pausable: not paused");
        _;
    }
    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }
    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
    uint256[49] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";
/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuardUpgradeable is Initializable {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.
    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;
    uint256 private _status;
    function __ReentrancyGuard_init() internal onlyInitializing {
        __ReentrancyGuard_init_unchained();
    }
    function __ReentrancyGuard_init_unchained() internal onlyInitializing {
        _status = _NOT_ENTERED;
    }
    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
        _;
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
    uint256[49] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
import "../IERC20Upgradeable.sol";
import "../../../utils/AddressUpgradeable.sol";
/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20Upgradeable {
    using AddressUpgradeable for address;
    function safeTransfer(
        IERC20Upgradeable token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }
    function safeTransferFrom(
        IERC20Upgradeable token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }
    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20Upgradeable token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }
    function safeIncreaseAllowance(
        IERC20Upgradeable token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
    function safeDecreaseAllowance(
        IERC20Upgradeable token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }
    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20Upgradeable token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.
        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/cryptography/ECDSA.sol)
pragma solidity ^0.8.0;
import "../Strings.sol";
/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS,
        InvalidSignatureV
    }
    function _throwError(RecoverError error) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert("ECDSA: invalid signature");
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert("ECDSA: invalid signature length");
        } else if (error == RecoverError.InvalidSignatureS) {
            revert("ECDSA: invalid signature 's' value");
        } else if (error == RecoverError.InvalidSignatureV) {
            revert("ECDSA: invalid signature 'v' value");
        }
    }
    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature` or error string. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
        // Check the signature length
        // - case 65: r,s,v signature (standard)
        // - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098) _Available since v4.1._
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else if (signature.length == 64) {
            bytes32 r;
            bytes32 vs;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            assembly {
                r := mload(add(signature, 0x20))
                vs := mload(add(signature, 0x40))
            }
            return tryRecover(hash, r, vs);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength);
        }
    }
    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, signature);
        _throwError(error);
        return recovered;
    }
    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address, RecoverError) {
        bytes32 s;
        uint8 v;
        assembly {
            s := and(vs, 0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff)
            v := add(shr(255, vs), 27)
        }
        return tryRecover(hash, v, r, s);
    }
    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     *
     * _Available since v4.2._
     */
    function recover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, r, vs);
        _throwError(error);
        return recovered;
    }
    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address, RecoverError) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS);
        }
        if (v != 27 && v != 28) {
            return (address(0), RecoverError.InvalidSignatureV);
        }
        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature);
        }
        return (signer, RecoverError.NoError);
    }
    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, v, r, s);
        _throwError(error);
        return recovered;
    }
    /**
     * @dev Returns an Ethereum Signed Message, created from a `hash`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
        // 32 is the length in bytes of hash,
        // enforced by the type signature above
        return keccak256(abi.encodePacked("\\x19Ethereum Signed Message:\
32", hash));
    }
    /**
     * @dev Returns an Ethereum Signed Message, created from `s`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\\x19Ethereum Signed Message:\
", Strings.toString(s.length), s));
    }
    /**
     * @dev Returns an Ethereum Signed Typed Data, created from a
     * `domainSeparator` and a `structHash`. This produces hash corresponding
     * to the one signed with the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
     * JSON-RPC method as part of EIP-712.
     *
     * See {recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\\x19\\x01", domainSeparator, structHash));
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20Upgradeable {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";
/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
        __Context_init_unchained();
    }
    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
    uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.
        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }
    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }
    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
}