Contract Source Code:

//SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.4;

interface IERC165 {

    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */

    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

/**
 * @dev Required interface of an ERC721 compliant contract.
 */

interface IERC721 is IERC165 {
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the owner of the NFT specified by `tokenId`.
     */

    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Transfers a specific NFT (`tokenId`) from one account (`from`) to
     * another (`to`).
     *
     *
     *
     * Requirements:
     * - `from`, `to` cannot be zero.
     * - `tokenId` must be owned by `from`.
     * - `tokenId` must be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move this
     * NFT by either {approve} or {setApprovalForAll}.
     */

    function safeTransferFrom(address from, address to, uint256 tokenId) external;
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
    function mintAndTransfer(address from, address to, uint256 itemId, uint256 fee, string memory _tokenURI, bytes memory data)external returns(uint256);

}

interface IERC1155 is IERC165 {

    /**
        @dev Either `TransferSingle` or `TransferBatch` MUST emit when tokens are transferred, including zero value transfers as well as minting or burning (see "Safe Transfer Rules" section of the standard).
        The `_operator` argument MUST be msg.sender.
        The `_from` argument MUST be the address of the holder whose balance is decreased.
        The `_to` argument MUST be the address of the recipient whose balance is increased.
        The `_id` argument MUST be the token type being transferred.
        The `_value` argument MUST be the number of tokens the holder balance is decreased by and match what the recipient balance is increased by.
        When minting/creating tokens, the `_from` argument MUST be set to `0x0` (i.e. zero address).
        When burning/destroying tokens, the `_to` argument MUST be set to `0x0` (i.e. zero address).
    */

    event TransferSingle(address indexed _operator, address indexed _from, address indexed _to, uint256 _id, uint256 _value);

    /**
        @dev Either `TransferSingle` or `TransferBatch` MUST emit when tokens are transferred, including zero value transfers as well as minting or burning (see "Safe Transfer Rules" section of the standard).
        The `_operator` argument MUST be msg.sender.
        The `_from` argument MUST be the address of the holder whose balance is decreased.
        The `_to` argument MUST be the address of the recipient whose balance is increased.
        The `_ids` argument MUST be the list of tokens being transferred.
        The `_values` argument MUST be the list of number of tokens (matching the list and order of tokens specified in _ids) the holder balance is decreased by and match what the recipient balance is increased by.
        When minting/creating tokens, the `_from` argument MUST be set to `0x0` (i.e. zero address).
        When burning/destroying tokens, the `_to` argument MUST be set to `0x0` (i.e. zero address).
    */

    event TransferBatch(address indexed _operator, address indexed _from, address indexed _to, uint256[] _ids, uint256[] _values);
    
    /**
        @dev MUST emit when approval for a second party/operator address to manage all tokens for an owner address is enabled or disabled (absense of an event assumes disabled).
    */

    event ApprovalForAll(address indexed _owner, address indexed _operator, bool _approved);

    /**
        @dev MUST emit when the URI is updated for a token ID.
        URIs are defined in RFC 3986.
        The URI MUST point a JSON file that conforms to the "ERC-1155 Metadata URI JSON Schema".
    */

    event URI(string _value, uint256 indexed _id);

    /**
        @notice Transfers `_value` amount of an `_id` from the `_from` address to the `_to` address specified (with safety call).
        @dev Caller must be approved to manage the tokens being transferred out of the `_from` account (see "Approval" section of the standard).
        MUST revert if `_to` is the zero address.
        MUST revert if balance of holder for token `_id` is lower than the `_value` sent.
        MUST revert on any other error.
        MUST emit the `TransferSingle` event to reflect the balance change (see "Safe Transfer Rules" section of the standard).
        After the above conditions are met, this function MUST check if `_to` is a smart contract (e.g. code size > 0). If so, it MUST call `onERC1155Received` on `_to` and act appropriately (see "Safe Transfer Rules" section of the standard).
        @param _from    Source address
        @param _to      Target address
        @param _id      ID of the token type
        @param _value   Transfer amount
        @param _data    Additional data with no specified format, MUST be sent unaltered in call to `onERC1155Received` on `_to`
    */

    function safeTransferFrom(address _from, address _to, uint256 _id, uint256 _value, bytes calldata _data) external;

    /**
        @notice Transfers `_values` amount(s) of `_ids` from the `_from` address to the `_to` address specified (with safety call).
        @dev Caller must be approved to manage the tokens being transferred out of the `_from` account (see "Approval" section of the standard).
        MUST revert if `_to` is the zero address.
        MUST revert if length of `_ids` is not the same as length of `_values`.
        MUST revert if any of the balance(s) of the holder(s) for token(s) in `_ids` is lower than the respective amount(s) in `_values` sent to the recipient.
        MUST revert on any other error.
        MUST emit `TransferSingle` or `TransferBatch` event(s) such that all the balance changes are reflected (see "Safe Transfer Rules" section of the standard).
        Balance changes and events MUST follow the ordering of the arrays (_ids[0]/_values[0] before _ids[1]/_values[1], etc).
        After the above conditions for the transfer(s) in the batch are met, this function MUST check if `_to` is a smart contract (e.g. code size > 0). If so, it MUST call the relevant `ERC1155TokenReceiver` hook(s) on `_to` and act appropriately (see "Safe Transfer Rules" section of the standard).
        @param _from    Source address
        @param _to      Target address
        @param _ids     IDs of each token type (order and length must match _values array)
        @param _values  Transfer amounts per token type (order and length must match _ids array)
        @param _data    Additional data with no specified format, MUST be sent unaltered in call to the `ERC1155TokenReceiver` hook(s) on `_to`
    */

    function safeBatchTransferFrom(address _from, address _to, uint256[] calldata _ids, uint256[] calldata _values, bytes calldata _data) external;

    function mintAndTransfer(address from, address to, uint256 itemId, uint256 fee, uint256 _supply, string memory _tokenURI, uint256 qty, bytes memory data)external returns(uint256);

}

interface IERC20 {
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
    event Transfer(address indexed from, address indexed to, uint256 value);
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

contract TransferProxy {

    event operatorChanged(address indexed from, address indexed to);
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);


    address public owner;
    address public operator;

    constructor() {
        owner = msg.sender;
    }

    /**
     * @dev Throws if called by any account other than the owner.
    */    

    modifier onlyOwner() {
        require(owner == msg.sender, "Ownable: caller is not the owner");
        _;
    }

    modifier onlyOperator() {
        require(operator == msg.sender, "OperatorRole: caller does not have the Operator role");
        _;
    }

        /** change the OperatorRole from contract creator address to trade contractaddress
            @param _operator :trade address 
        */

    function changeOperator(address _operator) public onlyOwner returns(bool) {
        require(_operator != address(0), "Operator: new operator is the zero address");
        operator = _operator;
        emit operatorChanged(address(0),operator);
        return true;
    }

        /** change the Ownership from current owner to newOwner address
        @param newOwner : newOwner address */

    function ownerTransfership(address newOwner) public onlyOwner returns(bool){
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        owner = newOwner;
        emit OwnershipTransferred(owner, newOwner);
        return true;
    }

    function erc721safeTransferFrom(IERC721 token, address from, address to, uint256 tokenId) external onlyOperator {
        token.safeTransferFrom(from, to, tokenId);
    }
    
    function erc721mintAndTransfer(IERC721 token, address from, address to, uint256 tokenId, uint256 fee, string memory tokenURI, bytes calldata data) external onlyOperator {
        token.mintAndTransfer(from, to, tokenId, fee, tokenURI,data);
    }

    function erc1155safeTransferFrom(IERC1155 token, address from, address to, uint256 tokenId, uint256 value, bytes calldata data) external onlyOperator {
        token.safeTransferFrom(from, to, tokenId, value, data);
    }

    function erc1155mintAndTransfer(IERC1155 token, address from, address to, uint256 tokenId, uint256 fee , uint256 supply, string memory tokenURI, uint256 qty, bytes calldata data) external onlyOperator {
        token.mintAndTransfer(from, to, tokenId, fee, supply, tokenURI, qty,data);
    }

    function erc20safeTransferFrom(IERC20 token, address from, address to, uint256 value) external onlyOperator {
        require(token.transferFrom(from, to, value), "failure while transferring");
    }    
}