Contract Name:
EsAVATRToken
Contract Source Code:
File 1 of 1 : EsAVATRToken
// Sources flattened with hardhat v2.12.7 https://hardhat.org
// File @openzeppelin/contracts/utils/Context.sol@v4.8.1
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File @openzeppelin/contracts/access/Ownable.sol@v4.8.1
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), 'Ownable: caller is not the owner');
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), 'Ownable: new owner is the zero address');
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File @openzeppelin/contracts/token/ERC20/IERC20.sol@v4.8.1
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 amount) external returns (bool);
}
// File @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol@v4.8.1
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File @openzeppelin/contracts/token/ERC20/ERC20.sol@v4.8.1
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/ERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address to, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_transfer(owner, to, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_approve(owner, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
* - the caller must have allowance for ``from``'s tokens of at least
* `amount`.
*/
function transferFrom(address from, address to, uint256 amount) public virtual override returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
_transfer(from, to, amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, allowance(owner, spender) + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
address owner = _msgSender();
uint256 currentAllowance = allowance(owner, spender);
require(currentAllowance >= subtractedValue, 'ERC20: decreased allowance below zero');
unchecked {
_approve(owner, spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `from` to `to`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
*/
function _transfer(address from, address to, uint256 amount) internal virtual {
require(from != address(0), 'ERC20: transfer from the zero address');
require(to != address(0), 'ERC20: transfer to the zero address');
_beforeTokenTransfer(from, to, amount);
uint256 fromBalance = _balances[from];
require(fromBalance >= amount, 'ERC20: transfer amount exceeds balance');
unchecked {
_balances[from] = fromBalance - amount;
// Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
// decrementing then incrementing.
_balances[to] += amount;
}
emit Transfer(from, to, amount);
_afterTokenTransfer(from, to, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), 'ERC20: mint to the zero address');
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
unchecked {
// Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
_balances[account] += amount;
}
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), 'ERC20: burn from the zero address');
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, 'ERC20: burn amount exceeds balance');
unchecked {
_balances[account] = accountBalance - amount;
// Overflow not possible: amount <= accountBalance <= totalSupply.
_totalSupply -= amount;
}
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), 'ERC20: approve from the zero address');
require(spender != address(0), 'ERC20: approve to the zero address');
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `amount`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/
function _spendAllowance(address owner, address spender, uint256 amount) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
require(currentAllowance >= amount, 'ERC20: insufficient allowance');
unchecked {
_approve(owner, spender, currentAllowance - amount);
}
}
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(address from, address to, uint256 amount) internal virtual {}
}
// File @openzeppelin/contracts/token/ERC20/extensions/draft-IERC20Permit.sol@v4.8.1
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*/
interface IERC20Permit {
/**
* @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
* given ``owner``'s signed approval.
*
* IMPORTANT: The same issues {IERC20-approve} has related to transaction
* ordering also apply here.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `deadline` must be a timestamp in the future.
* - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
* over the EIP712-formatted function arguments.
* - the signature must use ``owner``'s current nonce (see {nonces}).
*
* For more information on the signature format, see the
* https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
* section].
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @dev Returns the current nonce for `owner`. This value must be
* included whenever a signature is generated for {permit}.
*
* Every successful call to {permit} increases ``owner``'s nonce by one. This
* prevents a signature from being used multiple times.
*/
function nonces(address owner) external view returns (uint256);
/**
* @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// File @openzeppelin/contracts/utils/Address.sol@v4.8.1
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, 'Address: insufficient balance');
(bool success, ) = recipient.call{value: amount}('');
require(success, 'Address: unable to send value, recipient may have reverted');
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, 'Address: low-level call failed');
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, 'Address: low-level call with value failed');
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, 'Address: insufficient balance for call');
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, 'Address: low-level static call failed');
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, 'Address: low-level delegate call failed');
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), 'Address: call to non-contract');
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// File @openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol@v4.8.1
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
'SafeERC20: approve from non-zero to non-zero allowance'
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, 'SafeERC20: decreased allowance below zero');
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
function safePermit(
IERC20Permit token,
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) internal {
uint256 nonceBefore = token.nonces(owner);
token.permit(owner, spender, value, deadline, v, r, s);
uint256 nonceAfter = token.nonces(owner);
require(nonceAfter == nonceBefore + 1, 'SafeERC20: permit did not succeed');
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, 'SafeERC20: low-level call failed');
if (returndata.length > 0) {
// Return data is optional
require(abi.decode(returndata, (bool)), 'SafeERC20: ERC20 operation did not succeed');
}
}
}
// File @openzeppelin/contracts/security/ReentrancyGuard.sol@v4.8.1
// OpenZeppelin Contracts (last updated v4.8.0) (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
_nonReentrantBefore();
_;
_nonReentrantAfter();
}
function _nonReentrantBefore() private {
// On the first call to nonReentrant, _status will be _NOT_ENTERED
require(_status != _ENTERED, 'ReentrancyGuard: reentrant call');
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
}
function _nonReentrantAfter() private {
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// File @openzeppelin/contracts/utils/math/Math.sol@v4.8.1
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)
pragma solidity ^0.8.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
enum Rounding {
Down, // Toward negative infinity
Up, // Toward infinity
Zero // Toward zero
}
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a > b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow.
return (a & b) + (a ^ b) / 2;
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds up instead
* of rounding down.
*/
function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b - 1) / b can overflow on addition, so we distribute.
return a == 0 ? 0 : (a - 1) / b + 1;
}
/**
* @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
* @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
* with further edits by Uniswap Labs also under MIT license.
*/
function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
unchecked {
// 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
// use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
// variables such that product = prod1 * 2^256 + prod0.
uint256 prod0; // Least significant 256 bits of the product
uint256 prod1; // Most significant 256 bits of the product
assembly {
let mm := mulmod(x, y, not(0))
prod0 := mul(x, y)
prod1 := sub(sub(mm, prod0), lt(mm, prod0))
}
// Handle non-overflow cases, 256 by 256 division.
if (prod1 == 0) {
return prod0 / denominator;
}
// Make sure the result is less than 2^256. Also prevents denominator == 0.
require(denominator > prod1);
///////////////////////////////////////////////
// 512 by 256 division.
///////////////////////////////////////////////
// Make division exact by subtracting the remainder from [prod1 prod0].
uint256 remainder;
assembly {
// Compute remainder using mulmod.
remainder := mulmod(x, y, denominator)
// Subtract 256 bit number from 512 bit number.
prod1 := sub(prod1, gt(remainder, prod0))
prod0 := sub(prod0, remainder)
}
// Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
// See https://cs.stackexchange.com/q/138556/92363.
// Does not overflow because the denominator cannot be zero at this stage in the function.
uint256 twos = denominator & (~denominator + 1);
assembly {
// Divide denominator by twos.
denominator := div(denominator, twos)
// Divide [prod1 prod0] by twos.
prod0 := div(prod0, twos)
// Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
twos := add(div(sub(0, twos), twos), 1)
}
// Shift in bits from prod1 into prod0.
prod0 |= prod1 * twos;
// Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
// that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
// four bits. That is, denominator * inv = 1 mod 2^4.
uint256 inverse = (3 * denominator) ^ 2;
// Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
// in modular arithmetic, doubling the correct bits in each step.
inverse *= 2 - denominator * inverse; // inverse mod 2^8
inverse *= 2 - denominator * inverse; // inverse mod 2^16
inverse *= 2 - denominator * inverse; // inverse mod 2^32
inverse *= 2 - denominator * inverse; // inverse mod 2^64
inverse *= 2 - denominator * inverse; // inverse mod 2^128
inverse *= 2 - denominator * inverse; // inverse mod 2^256
// Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
// This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
// less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
// is no longer required.
result = prod0 * inverse;
return result;
}
}
/**
* @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
*/
function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
uint256 result = mulDiv(x, y, denominator);
if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
result += 1;
}
return result;
}
/**
* @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
*
* Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
*/
function sqrt(uint256 a) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
// For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
//
// We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
// `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
//
// This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
// → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
// → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
//
// Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
uint256 result = 1 << (log2(a) >> 1);
// At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
// since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
// every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
// into the expected uint128 result.
unchecked {
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
return min(result, a / result);
}
}
/**
* @notice Calculates sqrt(a), following the selected rounding direction.
*/
function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = sqrt(a);
return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
}
}
/**
* @dev Return the log in base 2, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 128;
}
if (value >> 64 > 0) {
value >>= 64;
result += 64;
}
if (value >> 32 > 0) {
value >>= 32;
result += 32;
}
if (value >> 16 > 0) {
value >>= 16;
result += 16;
}
if (value >> 8 > 0) {
value >>= 8;
result += 8;
}
if (value >> 4 > 0) {
value >>= 4;
result += 4;
}
if (value >> 2 > 0) {
value >>= 2;
result += 2;
}
if (value >> 1 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 2, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log2(value);
return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 10, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >= 10 ** 64) {
value /= 10 ** 64;
result += 64;
}
if (value >= 10 ** 32) {
value /= 10 ** 32;
result += 32;
}
if (value >= 10 ** 16) {
value /= 10 ** 16;
result += 16;
}
if (value >= 10 ** 8) {
value /= 10 ** 8;
result += 8;
}
if (value >= 10 ** 4) {
value /= 10 ** 4;
result += 4;
}
if (value >= 10 ** 2) {
value /= 10 ** 2;
result += 2;
}
if (value >= 10 ** 1) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log10(value);
return result + (rounding == Rounding.Up && 10 ** result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 256, rounded down, of a positive value.
* Returns 0 if given 0.
*
* Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
*/
function log256(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 16;
}
if (value >> 64 > 0) {
value >>= 64;
result += 8;
}
if (value >> 32 > 0) {
value >>= 32;
result += 4;
}
if (value >> 16 > 0) {
value >>= 16;
result += 2;
}
if (value >> 8 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log256(value);
return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
}
}
}
// File @openzeppelin/contracts/utils/math/SafeMath.sol@v4.8.1
// OpenZeppelin Contracts (last updated v4.6.0) (utils/math/SafeMath.sol)
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the subtraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
// File @openzeppelin/contracts/utils/structs/EnumerableSet.sol@v4.8.1
// OpenZeppelin Contracts (last updated v4.8.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.
pragma solidity ^0.8.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*
* [WARNING]
* ====
* Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
* unusable.
* See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
*
* In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
* array of EnumerableSet.
* ====
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping(bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) {
// Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
if (lastIndex != toDeleteIndex) {
bytes32 lastValue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastValue;
// Update the index for the moved value
set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
}
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
return set._values[index];
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function _values(Set storage set) private view returns (bytes32[] memory) {
return set._values;
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
bytes32[] memory store = _values(set._inner);
bytes32[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint160(uint256(_at(set._inner, index))));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(AddressSet storage set) internal view returns (address[] memory) {
bytes32[] memory store = _values(set._inner);
address[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(UintSet storage set) internal view returns (uint256[] memory) {
bytes32[] memory store = _values(set._inner);
uint256[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
}
// File contracts/interfaces/IESAVATRTokenUsage.sol
pragma solidity ^0.8.9;
interface IESAVATRTokenUsage {
function allocate(address userAddress, uint256 amount, bytes calldata data) external;
function deallocate(address userAddress, uint256 amount, bytes calldata data) external;
}
// File contracts/interfaces/tokens/IAVATRToken.sol
pragma solidity ^0.8.9;
interface IAVATRToken is IERC20 {
function lastEmissionTime() external view returns (uint256);
function claimMasterRewards(uint256 amount) external returns (uint256 effectiveAmount);
function masterEmissionRate() external view returns (uint256);
function burn(uint256 amount) external;
}
// File contracts/interfaces/tokens/IESAVATRToken.sol
pragma solidity ^0.8.9;
interface IESAVATRToken is IERC20 {
function usageAllocations(address userAddress, address usageAddress) external view returns (uint256 allocation);
function allocateFromUsage(address userAddress, uint256 amount) external;
function convertTo(uint256 amount, address to) external;
function deallocateFromUsage(address userAddress, uint256 amount) external;
function isTransferWhitelisted(address account) external view returns (bool);
}
// File contracts/EsAVATRToken.sol
pragma solidity ^0.8.9;
/*
* ESAVATR escrowed governance token obtainable by converting AVATR to it
* It's non-transferable, except from/to whitelisted addresses
* It can be converted back to AVATR through a vesting process
* This contract is made to receive esAVATR deposits from users in order to allocate them to Usages (plugins) contracts
*/
contract EsAVATRToken is Ownable, ReentrancyGuard, ERC20('AVATR token', 'esAVATR'), IESAVATRToken {
using Address for address;
using SafeMath for uint256;
using EnumerableSet for EnumerableSet.AddressSet;
using SafeERC20 for IAVATRToken;
struct ESAVATRBalance {
uint256 allocatedAmount; // Amount of ESAVATR allocated to a Usage
uint256 redeemingAmount; // Total amount of ESAVATR currently being redeemed
}
struct RedeemInfo {
uint256 avatrAmount; // avatr amount to receive when vesting has ended AVATR
uint256 ESAVATRAmount; // ESAVATR amount to redeem
uint256 endTime;
IESAVATRTokenUsage dividendsAddress;
uint256 dividendsAllocation; // Share of redeeming ESAVATR to allocate to the Dividends Usage contract
}
IAVATRToken public immutable avatrToken; // avatr token to convert to/from
IESAVATRTokenUsage public dividendsAddress; // avatr dividends contract
EnumerableSet.AddressSet private _transferWhitelist; // addresses allowed to send/receive ESAVATR
mapping(address => mapping(address => uint256)) public usageApprovals; // Usage approvals to allocate ESAVATR
mapping(address => mapping(address => uint256)) public override usageAllocations; // Active ESAVATR allocations to usages
uint256 public constant MAX_DEALLOCATION_FEE = 200; // 2%
mapping(address => uint256) public usagesDeallocationFee; // Fee paid when deallocating ESAVATR
uint256 public constant MAX_FIXED_RATIO = 100; // 100%
// Redeeming min/max settings
uint256 public minRedeemRatio = 50; // 1:0.5
uint256 public maxRedeemRatio = 100; // 1:1
uint256 public minRedeemDuration = 3 days; // 1296000s
uint256 public maxRedeemDuration = 14 days; // 7776000s
// Adjusted dividends rewards for redeeming ESAVATR
uint256 public redeemDividendsAdjustment = 0; // 50%
mapping(address => ESAVATRBalance) public ESAVATRBalances; // User's ESAVATR balances
mapping(address => RedeemInfo[]) public userRedeems; // User's redeeming instances
constructor(IAVATRToken avatrToken_) {
avatrToken = avatrToken_;
_transferWhitelist.add(address(this));
}
/********************************************/
/****************** EVENTS ******************/
/********************************************/
event ApproveUsage(address indexed userAddress, address indexed usageAddress, uint256 amount);
event Convert(address indexed from, address to, uint256 amount);
event UpdateRedeemSettings(
uint256 minRedeemRatio,
uint256 maxRedeemRatio,
uint256 minRedeemDuration,
uint256 maxRedeemDuration,
uint256 redeemDividendsAdjustment
);
event UpdateDividendsAddress(address previousDividendsAddress, address newDividendsAddress);
event UpdateDeallocationFee(address indexed usageAddress, uint256 fee);
event SetTransferWhitelist(address account, bool add);
event Redeem(address indexed userAddress, uint256 ESAVATRAmount, uint256 avatrAmount, uint256 duration);
event FinalizeRedeem(address indexed userAddress, uint256 ESAVATRAmount, uint256 avatrAmount);
event CancelRedeem(address indexed userAddress, uint256 ESAVATRAmount);
event UpdateRedeemDividendsAddress(
address indexed userAddress,
uint256 redeemIndex,
address previousDividendsAddress,
address newDividendsAddress
);
event Allocate(address indexed userAddress, address indexed usageAddress, uint256 amount);
event Deallocate(address indexed userAddress, address indexed usageAddress, uint256 amount, uint256 fee);
/***********************************************/
/****************** MODIFIERS ******************/
/***********************************************/
/*
* @dev Check if a redeem entry exists
*/
modifier validateRedeem(address userAddress, uint256 redeemIndex) {
require(redeemIndex < userRedeems[userAddress].length, 'validateRedeem: redeem entry does not exist');
_;
}
/**************************************************/
/****************** PUBLIC VIEWS ******************/
/**************************************************/
/*
* @dev Returns user's ESAVATR balances
*/
function getESAVATRBalance(
address userAddress
) external view returns (uint256 allocatedAmount, uint256 redeemingAmount) {
ESAVATRBalance storage balance = ESAVATRBalances[userAddress];
return (balance.allocatedAmount, balance.redeemingAmount);
}
/*
* @dev returns redeemable avatr for "amount" of ESAVATR vested for "duration" seconds
*/
function getagiByVestingDuration(uint256 amount, uint256 duration) public view returns (uint256) {
if (duration < minRedeemDuration) {
return 0;
}
// capped to maxRedeemDuration
if (duration > maxRedeemDuration) {
return amount.mul(maxRedeemRatio).div(100);
}
uint256 ratio = minRedeemRatio.add(
(duration.sub(minRedeemDuration)).mul(maxRedeemRatio.sub(minRedeemRatio)).div(
maxRedeemDuration.sub(minRedeemDuration)
)
);
return amount.mul(ratio).div(100);
}
/**
* @dev returns quantity of "userAddress" pending redeems
*/
function getUserRedeemsLength(address userAddress) external view returns (uint256) {
return userRedeems[userAddress].length;
}
/**
* @dev returns "userAddress" info for a pending redeem identified by "redeemIndex"
*/
function getUserRedeem(
address userAddress,
uint256 redeemIndex
)
external
view
validateRedeem(userAddress, redeemIndex)
returns (
uint256 avatrAmount,
uint256 ESAVATRAmount,
uint256 endTime,
address dividendsContract,
uint256 dividendsAllocation
)
{
RedeemInfo storage _redeem = userRedeems[userAddress][redeemIndex];
return (
_redeem.avatrAmount,
_redeem.ESAVATRAmount,
_redeem.endTime,
address(_redeem.dividendsAddress),
_redeem.dividendsAllocation
);
}
/**
* @dev returns approved ESAVATR to allocate from "userAddress" to "usageAddress"
*/
function getUsageApproval(address userAddress, address usageAddress) external view returns (uint256) {
return usageApprovals[userAddress][usageAddress];
}
/**
* @dev returns allocated ESAVATR from "userAddress" to "usageAddress"
*/
function getUsageAllocation(address userAddress, address usageAddress) external view returns (uint256) {
return usageAllocations[userAddress][usageAddress];
}
/**
* @dev returns length of transferWhitelist array
*/
function transferWhitelistLength() external view returns (uint256) {
return _transferWhitelist.length();
}
/**
* @dev returns transferWhitelist array item's address for "index"
*/
function transferWhitelist(uint256 index) external view returns (address) {
return _transferWhitelist.at(index);
}
/**
* @dev returns if "account" is allowed to send/receive ESAVATR
*/
function isTransferWhitelisted(address account) external view override returns (bool) {
return _transferWhitelist.contains(account);
}
/*******************************************************/
/****************** OWNABLE FUNCTIONS ******************/
/*******************************************************/
/**
* @dev Updates all redeem ratios and durations
*
* Must only be called by owner
*/
function updateRedeemSettings(
uint256 minRedeemRatio_,
uint256 maxRedeemRatio_,
uint256 minRedeemDuration_,
uint256 maxRedeemDuration_,
uint256 redeemDividendsAdjustment_
) external onlyOwner {
require(minRedeemRatio_ <= maxRedeemRatio_, 'updateRedeemSettings: wrong ratio values');
require(minRedeemDuration_ < maxRedeemDuration_, 'updateRedeemSettings: wrong duration values');
// should never exceed 100%
require(
maxRedeemRatio_ <= MAX_FIXED_RATIO && redeemDividendsAdjustment_ <= MAX_FIXED_RATIO,
'updateRedeemSettings: wrong ratio values'
);
minRedeemRatio = minRedeemRatio_;
maxRedeemRatio = maxRedeemRatio_;
minRedeemDuration = minRedeemDuration_;
maxRedeemDuration = maxRedeemDuration_;
redeemDividendsAdjustment = redeemDividendsAdjustment_;
emit UpdateRedeemSettings(
minRedeemRatio_,
maxRedeemRatio_,
minRedeemDuration_,
maxRedeemDuration_,
redeemDividendsAdjustment_
);
}
/**
* @dev Updates dividends contract address
*
* Must only be called by owner
*/
function updateDividendsAddress(IESAVATRTokenUsage dividendsAddress_) external onlyOwner {
// if set to 0, also set divs earnings while redeeming to 0
if (address(dividendsAddress_) == address(0)) {
redeemDividendsAdjustment = 0;
}
emit UpdateDividendsAddress(address(dividendsAddress), address(dividendsAddress_));
dividendsAddress = dividendsAddress_;
}
/**
* @dev Updates fee paid by users when deallocating from "usageAddress"
*/
function updateDeallocationFee(address usageAddress, uint256 fee) external onlyOwner {
require(fee <= MAX_DEALLOCATION_FEE, 'updateDeallocationFee: too high');
usagesDeallocationFee[usageAddress] = fee;
emit UpdateDeallocationFee(usageAddress, fee);
}
/**
* @dev Adds or removes addresses from the transferWhitelist
*/
function updateTransferWhitelist(address account, bool add) external onlyOwner {
require(account != address(this), 'updateTransferWhitelist: Cannot remove ESAVATR from whitelist');
if (add) _transferWhitelist.add(account);
else _transferWhitelist.remove(account);
emit SetTransferWhitelist(account, add);
}
/*****************************************************************/
/****************** EXTERNAL PUBLIC FUNCTIONS ******************/
/*****************************************************************/
/**
* @dev Approves "usage" address to get allocations up to "amount" of ESAVATR from msg.sender
*/
function approveUsage(IESAVATRTokenUsage usage, uint256 amount) external nonReentrant {
require(address(usage) != address(0), 'approveUsage: approve to the zero address');
usageApprovals[msg.sender][address(usage)] = amount;
emit ApproveUsage(msg.sender, address(usage), amount);
}
/**
* @dev Convert caller's "amount" of avatr to ESAVATR
*/
function convert(uint256 amount) external nonReentrant {
_convert(amount, msg.sender);
}
/**
* @dev Convert caller's "amount" of avatr to ESAVATR to "to" address
*/
function convertTo(uint256 amount, address to) external override nonReentrant {
require(address(msg.sender).isContract(), 'convertTo: not allowed');
_convert(amount, to);
}
/**
* @dev Initiates redeem process (ESAVATR to avatr)
*
* Handles dividends' compensation allocation during the vesting process if needed
*/
function redeem(uint256 ESAVATRAmount, uint256 duration) external nonReentrant {
require(ESAVATRAmount > 0, 'redeem: ESAVATRAmount cannot be null');
require(duration >= minRedeemDuration, 'redeem: duration too low');
_transfer(msg.sender, address(this), ESAVATRAmount);
ESAVATRBalance storage balance = ESAVATRBalances[msg.sender];
// get corresponding avatr amount
uint256 avatrAmount = getagiByVestingDuration(ESAVATRAmount, duration);
emit Redeem(msg.sender, ESAVATRAmount, avatrAmount, duration);
// if redeeming is not immediate, go through vesting process
if (duration > 0) {
// add to SBT total
balance.redeemingAmount = balance.redeemingAmount.add(ESAVATRAmount);
// handle dividends during the vesting process
uint256 dividendsAllocation = ESAVATRAmount.mul(redeemDividendsAdjustment).div(100);
// only if compensation is active
if (dividendsAllocation > 0) {
// allocate to dividends
dividendsAddress.allocate(msg.sender, dividendsAllocation, new bytes(0));
}
// add redeeming entry
userRedeems[msg.sender].push(
RedeemInfo(
avatrAmount,
ESAVATRAmount,
_currentBlockTimestamp().add(duration),
dividendsAddress,
dividendsAllocation
)
);
} else {
// immediately redeem for avatr
_finalizeRedeem(msg.sender, ESAVATRAmount, avatrAmount);
}
}
/**
* @dev Finalizes redeem process when vesting duration has been reached
*
* Can only be called by the redeem entry owner
*/
function finalizeRedeem(uint256 redeemIndex) external nonReentrant validateRedeem(msg.sender, redeemIndex) {
ESAVATRBalance storage balance = ESAVATRBalances[msg.sender];
RedeemInfo storage _redeem = userRedeems[msg.sender][redeemIndex];
require(_currentBlockTimestamp() >= _redeem.endTime, 'finalizeRedeem: vesting duration has not ended yet');
// remove from SBT total
balance.redeemingAmount = balance.redeemingAmount.sub(_redeem.ESAVATRAmount);
_finalizeRedeem(msg.sender, _redeem.ESAVATRAmount, _redeem.avatrAmount);
// handle dividends compensation if any was active
if (_redeem.dividendsAllocation > 0) {
// deallocate from dividends
IESAVATRTokenUsage(_redeem.dividendsAddress).deallocate(
msg.sender,
_redeem.dividendsAllocation,
new bytes(0)
);
}
// remove redeem entry
_deleteRedeemEntry(redeemIndex);
}
/**
* @dev Updates dividends address for an existing active redeeming process
*
* Can only be called by the involved user
* Should only be used if dividends contract was to be migrated
*/
function updateRedeemDividendsAddress(
uint256 redeemIndex
) external nonReentrant validateRedeem(msg.sender, redeemIndex) {
RedeemInfo storage _redeem = userRedeems[msg.sender][redeemIndex];
// only if the active dividends contract is not the same anymore
if (dividendsAddress != _redeem.dividendsAddress && address(dividendsAddress) != address(0)) {
if (_redeem.dividendsAllocation > 0) {
// deallocate from old dividends contract
_redeem.dividendsAddress.deallocate(msg.sender, _redeem.dividendsAllocation, new bytes(0));
// allocate to new used dividends contract
dividendsAddress.allocate(msg.sender, _redeem.dividendsAllocation, new bytes(0));
}
emit UpdateRedeemDividendsAddress(
msg.sender,
redeemIndex,
address(_redeem.dividendsAddress),
address(dividendsAddress)
);
_redeem.dividendsAddress = dividendsAddress;
}
}
/**
* @dev Cancels an ongoing redeem entry
*
* Can only be called by its owner
*/
function cancelRedeem(uint256 redeemIndex) external nonReentrant validateRedeem(msg.sender, redeemIndex) {
ESAVATRBalance storage balance = ESAVATRBalances[msg.sender];
RedeemInfo storage _redeem = userRedeems[msg.sender][redeemIndex];
// make redeeming ESAVATR available again
balance.redeemingAmount = balance.redeemingAmount.sub(_redeem.ESAVATRAmount);
_transfer(address(this), msg.sender, _redeem.ESAVATRAmount);
// handle dividends compensation if any was active
if (_redeem.dividendsAllocation > 0) {
// deallocate from dividends
IESAVATRTokenUsage(_redeem.dividendsAddress).deallocate(
msg.sender,
_redeem.dividendsAllocation,
new bytes(0)
);
}
emit CancelRedeem(msg.sender, _redeem.ESAVATRAmount);
// remove redeem entry
_deleteRedeemEntry(redeemIndex);
}
/**
* @dev Allocates caller's "amount" of available ESAVATR to "usageAddress" contract
*
* args specific to usage contract must be passed into "usageData"
*/
function allocate(address usageAddress, uint256 amount, bytes calldata usageData) external nonReentrant {
_allocate(msg.sender, usageAddress, amount);
// allocates ESAVATR to usageContract
IESAVATRTokenUsage(usageAddress).allocate(msg.sender, amount, usageData);
}
/**
* @dev Allocates "amount" of available ESAVATR from "userAddress" to caller (ie usage contract)
*
* Caller must have an allocation approval for the required ESAVATR ESAVATR from "userAddress"
*/
function allocateFromUsage(address userAddress, uint256 amount) external override nonReentrant {
_allocate(userAddress, msg.sender, amount);
}
/**
* @dev Deallocates caller's "amount" of available ESAVATR from "usageAddress" contract
*
* args specific to usage contract must be passed into "usageData"
*/
function deallocate(address usageAddress, uint256 amount, bytes calldata usageData) external nonReentrant {
_deallocate(msg.sender, usageAddress, amount);
// deallocate ESAVATR into usageContract
IESAVATRTokenUsage(usageAddress).deallocate(msg.sender, amount, usageData);
}
/**
* @dev Deallocates "amount" of allocated ESAVATR belonging to "userAddress" from caller (ie usage contract)
*
* Caller can only deallocate ESAVATR from itself
*/
function deallocateFromUsage(address userAddress, uint256 amount) external override nonReentrant {
_deallocate(userAddress, msg.sender, amount);
}
/********************************************************/
/****************** INTERNAL FUNCTIONS ******************/
/********************************************************/
/**
* @dev Convert caller's "amount" of avatr into ESAVATR to "to"
*/
function _convert(uint256 amount, address to) internal {
require(amount != 0, 'convert: amount cannot be null');
// mint new ESAVATR
_mint(to, amount);
emit Convert(msg.sender, to, amount);
avatrToken.safeTransferFrom(msg.sender, address(this), amount);
}
/**
* @dev Finalizes the redeeming process for "userAddress" by transferring him "AVATRAmount" and removing "ESAVATRAmount" from supply
*
* Any vesting check should be ran before calling this
* avatr excess is automatically burnt
*/
function _finalizeRedeem(address userAddress, uint256 ESAVATRAmount, uint256 AVATRAmount) internal {
uint256 agiExcess = ESAVATRAmount.sub(AVATRAmount);
// sends due avatr tokens
avatrToken.safeTransfer(userAddress, AVATRAmount);
// burns avatr excess if any
avatrToken.burn(agiExcess);
_burn(address(this), ESAVATRAmount);
emit FinalizeRedeem(userAddress, ESAVATRAmount, AVATRAmount);
}
/**
* @dev Allocates "userAddress" user's "amount" of available ESAVATR to "usageAddress" contract
*
*/
function _allocate(address userAddress, address usageAddress, uint256 amount) internal {
require(amount > 0, 'allocate: amount cannot be null');
ESAVATRBalance storage balance = ESAVATRBalances[userAddress];
// approval checks if allocation request amount has been approved by userAddress to be allocated to this usageAddress
uint256 approvedESAVATR = usageApprovals[userAddress][usageAddress];
require(approvedESAVATR >= amount, 'allocate: non authorized amount');
// remove allocated amount from usage's approved amount
usageApprovals[userAddress][usageAddress] = approvedESAVATR.sub(amount);
// update usage's allocatedAmount for userAddress
usageAllocations[userAddress][usageAddress] = usageAllocations[userAddress][usageAddress].add(amount);
// adjust user's ESAVATR balances
balance.allocatedAmount = balance.allocatedAmount.add(amount);
_transfer(userAddress, address(this), amount);
emit Allocate(userAddress, usageAddress, amount);
}
/**
* @dev Deallocates "amount" of available ESAVATR to "usageAddress" contract
*
* args specific to usage contract must be passed into "usageData"
*/
function _deallocate(address userAddress, address usageAddress, uint256 amount) internal {
require(amount > 0, 'deallocate: amount cannot be null');
// check if there is enough allocated ESAVATR to this usage to deallocate
uint256 allocatedAmount = usageAllocations[userAddress][usageAddress];
require(allocatedAmount >= amount, 'deallocate: non authorized amount');
// remove deallocated amount from usage's allocation
usageAllocations[userAddress][usageAddress] = allocatedAmount.sub(amount);
uint256 deallocationFeeAmount = amount.mul(usagesDeallocationFee[usageAddress]).div(10000);
// adjust user's ESAVATR balances
ESAVATRBalance storage balance = ESAVATRBalances[userAddress];
balance.allocatedAmount = balance.allocatedAmount.sub(amount);
_transfer(address(this), userAddress, amount.sub(deallocationFeeAmount));
// burn corresponding avatr and ESAVATR
avatrToken.burn(deallocationFeeAmount);
_burn(address(this), deallocationFeeAmount);
emit Deallocate(userAddress, usageAddress, amount, deallocationFeeAmount);
}
function _deleteRedeemEntry(uint256 index) internal {
userRedeems[msg.sender][index] = userRedeems[msg.sender][userRedeems[msg.sender].length - 1];
userRedeems[msg.sender].pop();
}
/**
* @dev Hook override to forbid transfers except from whitelisted addresses and minting
*/
function _beforeTokenTransfer(address from, address to, uint256 /*amount*/) internal view override {
require(
from == address(0) || _transferWhitelist.contains(from) || _transferWhitelist.contains(to),
'transfer: not allowed'
);
}
/**
* @dev Utility function to get the current block timestamp
*/
function _currentBlockTimestamp() internal view virtual returns (uint256) {
/* solhint-disable not-rely-on-time */
return block.timestamp;
}
function ccurrentBlockTimestamp() public view virtual returns (uint256) {
/* solhint-disable not-rely-on-time */
return block.timestamp;
}
}