Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.17;

import { OwnableUpgradeable } from "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";
import { EnumerableSetUpgradeable } from "@openzeppelin/contracts-upgradeable/utils/structs/EnumerableSetUpgradeable.sol";

import { IBondFactory } from "./_interfaces/buttonwood/IBondFactory.sol";
import { IBondController } from "./_interfaces/buttonwood/IBondController.sol";
import { IBondIssuer } from "./_interfaces/IBondIssuer.sol";

/**
 *  @title BondIssuer
 *
 *  @notice An issuer periodically issues bonds based on a predefined configuration.
 *
 *  @dev Based on the provided frequency, issuer instantiates a new bond with the config when poked.
 *
 */
contract BondIssuer is IBondIssuer, OwnableUpgradeable {
    using EnumerableSetUpgradeable for EnumerableSetUpgradeable.AddressSet;

    /// @dev Using the same granularity as the underlying buttonwood tranche contracts.
    ///      https://github.com/buttonwood-protocol/tranche/blob/main/contracts/BondController.sol
    uint256 private constant TRANCHE_RATIO_GRANULARITY = 1000;

    /// @notice Address of the bond factory.
    IBondFactory public immutable bondFactory;

    /// @notice The underlying rebasing token used for tranching.
    address public immutable collateral;

    /// @notice The maximum maturity duration for the issued bonds.
    /// @dev In practice, bonds issued by this issuer won't have a constant duration as
    ///      block.timestamp when the issue function is invoked can vary.
    ///      Rather these bonds are designed to have a predictable maturity date.
    uint256 public maxMaturityDuration;

    /// @notice The tranche ratios.
    /// @dev Each tranche ratio is expressed as a fixed point number
    ///      such that the sum of all the tranche ratios is exactly 1000.
    ///      https://github.com/buttonwood-protocol/tranche/blob/main/contracts/BondController.sol#L20
    uint256[] public trancheRatios;

    /// @notice Time to elapse since last issue window start, after which a new bond can be issued.
    ///         AKA, issue frequency.
    uint256 public minIssueTimeIntervalSec;

    /// @notice The issue window begins this many seconds into the minIssueTimeIntervalSec period.
    /// @dev For example if minIssueTimeIntervalSec is 604800 (1 week), and issueWindowOffsetSec is 93600
    ///      then the issue window opens at Friday 2AM GMT every week.
    uint256 public issueWindowOffsetSec;

    /// @notice An enumerable list to keep track of bonds issued by this issuer.
    /// @dev Bonds are only added and never removed, thus the last item will always point
    ///      to the latest bond.
    EnumerableSetUpgradeable.AddressSet private _issuedBonds;

    /// @notice The timestamp when the issue window opened during the last issue.
    uint256 public lastIssueWindowTimestamp;

    /// @notice Contract constructor
    /// @param bondFactory_ The bond factory reference.
    /// @param collateral_ The address of the collateral ERC-20.
    constructor(IBondFactory bondFactory_, address collateral_) {
        bondFactory = bondFactory_;
        collateral = collateral_;
    }

    /// @notice Contract initializer.
    /// @param maxMaturityDuration_ The maximum maturity duration.
    /// @param trancheRatios_ The tranche ratios.
    /// @param minIssueTimeIntervalSec_ The minimum time between successive issues.
    /// @param issueWindowOffsetSec_ The issue window offset.
    function init(
        uint256 maxMaturityDuration_,
        uint256[] memory trancheRatios_,
        uint256 minIssueTimeIntervalSec_,
        uint256 issueWindowOffsetSec_
    ) public initializer {
        __Ownable_init();
        updateMaxMaturityDuration(maxMaturityDuration_);
        updateTrancheRatios(trancheRatios_);
        updateIssuanceTimingConfig(minIssueTimeIntervalSec_, issueWindowOffsetSec_);
    }

    /// @notice Updates the bond duration.
    /// @param maxMaturityDuration_ The new maximum maturity duration.
    function updateMaxMaturityDuration(uint256 maxMaturityDuration_) public onlyOwner {
        maxMaturityDuration = maxMaturityDuration_;
    }

    /// @notice Updates the tranche ratios used to issue bonds.
    /// @param trancheRatios_ The new tranche ratios, ordered by decreasing seniority (i.e. A to Z)
    function updateTrancheRatios(uint256[] memory trancheRatios_) public onlyOwner {
        trancheRatios = trancheRatios_;
        uint256 ratioSum;
        for (uint8 i = 0; i < trancheRatios_.length; i++) {
            ratioSum += trancheRatios_[i];
        }
        require(ratioSum == TRANCHE_RATIO_GRANULARITY, "BondIssuer: Invalid tranche ratios");
    }

    /// @notice Updates the bond frequency and offset.
    /// @param minIssueTimeIntervalSec_ The new issuance interval.
    /// @param issueWindowOffsetSec_ The new issue window offset.
    function updateIssuanceTimingConfig(uint256 minIssueTimeIntervalSec_, uint256 issueWindowOffsetSec_)
        public
        onlyOwner
    {
        minIssueTimeIntervalSec = minIssueTimeIntervalSec_;
        issueWindowOffsetSec = issueWindowOffsetSec_;
    }

    /// @inheritdoc IBondIssuer
    function isInstance(IBondController bond) external view override returns (bool) {
        return _issuedBonds.contains(address(bond));
    }

    /// @inheritdoc IBondIssuer
    function issue() public override {
        if (block.timestamp < lastIssueWindowTimestamp + minIssueTimeIntervalSec) {
            return;
        }

        // Set to the timestamp of the most recent issue window start
        lastIssueWindowTimestamp = block.timestamp - (block.timestamp % minIssueTimeIntervalSec) + issueWindowOffsetSec;

        IBondController bond = IBondController(
            bondFactory.createBond(collateral, trancheRatios, lastIssueWindowTimestamp + maxMaturityDuration)
        );

        _issuedBonds.add(address(bond));

        emit BondIssued(bond);
    }

    /// @inheritdoc IBondIssuer
    /// @dev Lazily issues a new bond when the time is right.
    function getLatestBond() external override returns (IBondController) {
        issue();
        // NOTE: The latest bond will be at the end of the list.
        return IBondController(_issuedBonds.at(_issuedBonds.length() - 1));
    }

    /// @inheritdoc IBondIssuer
    function issuedCount() external view override returns (uint256) {
        return _issuedBonds.length();
    }

    /// @inheritdoc IBondIssuer
    function issuedBondAt(uint256 index) external view override returns (IBondController) {
        return IBondController(_issuedBonds.at(index));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    function __Ownable_init() internal onlyInitializing {
        __Ownable_init_unchained();
    }

    function __Ownable_init_unchained() internal onlyInitializing {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[49] private __gap;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/structs/EnumerableSet.sol)

pragma solidity ^0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 *
 * [WARNING]
 * ====
 *  Trying to delete such a structure from storage will likely result in data corruption, rendering the structure unusable.
 *  See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 *  In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an array of EnumerableSet.
 * ====
 */
library EnumerableSetUpgradeable {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            if (lastIndex != toDeleteIndex) {
                bytes32 lastValue = set._values[lastIndex];

                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastValue;
                // Update the index for the moved value
                set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        return _values(set._inner);
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.8.0;

interface IBondFactory {
    function createBond(
        address _collateralToken,
        uint256[] memory trancheRatios,
        uint256 maturityDate
    ) external returns (address);
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.8.0;

import { ITranche } from "./ITranche.sol";

interface IBondController {
    function collateralToken() external view returns (address);

    function maturityDate() external view returns (uint256);

    function creationDate() external view returns (uint256);

    function totalDebt() external view returns (uint256);

    function feeBps() external view returns (uint256);

    function isMature() external view returns (bool);

    function tranches(uint256 i) external view returns (ITranche token, uint256 ratio);

    function trancheCount() external view returns (uint256 count);

    function trancheTokenAddresses(ITranche token) external view returns (bool);

    function deposit(uint256 amount) external;

    function redeem(uint256[] memory amounts) external;

    function mature() external;

    function redeemMature(address tranche, uint256 amount) external;
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.8.0;

import { IBondController } from "./buttonwood/IBondController.sol";

interface IBondIssuer {
    /// @notice Event emitted when a new bond is issued by the issuer.
    /// @param bond The newly issued bond.
    event BondIssued(IBondController bond);

    /// @notice The address of the underlying collateral token to be used for issued bonds.
    /// @return Address of the collateral token.
    function collateral() external view returns (address);

    /// @notice Issues a new bond if sufficient time has elapsed since the last issue.
    function issue() external;

    /// @notice Checks if a given bond has been issued by the issuer.
    /// @param bond Address of the bond to check.
    /// @return if the bond has been issued by the issuer.
    function isInstance(IBondController bond) external view returns (bool);

    /// @notice Fetches the most recently issued bond.
    /// @return Address of the most recent bond.
    function getLatestBond() external returns (IBondController);

    /// @notice Returns the total number of bonds issued by this issuer.
    /// @return Number of bonds.
    function issuedCount() external view returns (uint256);

    /// @notice The bond address from the issued list by index.
    /// @return Address of the bond.
    function issuedBondAt(uint256 index) external view returns (IBondController);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
    }

    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[50] private __gap;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.2;

import "../../utils/AddressUpgradeable.sol";

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     * @custom:oz-retyped-from bool
     */
    uint8 private _initialized;

    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint8 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts. Equivalent to `reinitializer(1)`.
     */
    modifier initializer() {
        bool isTopLevelCall = !_initializing;
        require(
            (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),
            "Initializable: contract is already initialized"
        );
        _initialized = 1;
        if (isTopLevelCall) {
            _initializing = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * `initializer` is equivalent to `reinitializer(1)`, so a reinitializer may be used after the original
     * initialization step. This is essential to configure modules that are added through upgrades and that require
     * initialization.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     */
    modifier reinitializer(uint8 version) {
        require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
        _initialized = version;
        _initializing = true;
        _;
        _initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     */
    function _disableInitializers() internal virtual {
        require(!_initializing, "Initializable: contract is initializing");
        if (_initialized < type(uint8).max) {
            _initialized = type(uint8).max;
            emit Initialized(type(uint8).max);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                /// @solidity memory-safe-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.8.0;

import { IERC20Upgradeable } from "@openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol";

interface ITranche is IERC20Upgradeable {
    function bond() external view returns (address);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20Upgradeable {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"contract IBondFactory","name":"bondFactory_","type":"address"},{"internalType":"address","name":"collateral_","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"contract IBondController","name":"bond","type":"address"}],"name":"BondIssued","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint8","name":"version","type":"uint8"}],"name":"Initialized","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"inputs":[],"name":"bondFactory","outputs":[{"internalType":"contract IBondFactory","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"collateral","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getLatestBond","outputs":[{"internalType":"contract IBondController","name":"","type":"address"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"maxMaturityDuration_","type":"uint256"},{"internalType":"uint256[]","name":"trancheRatios_","type":"uint256[]"},{"internalType":"uint256","name":"minIssueTimeIntervalSec_","type":"uint256"},{"internalType":"uint256","name":"issueWindowOffsetSec_","type":"uint256"}],"name":"init","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IBondController","name":"bond","type":"address"}],"name":"isInstance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"issue","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"issueWindowOffsetSec","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"index","type":"uint256"}],"name":"issuedBondAt","outputs":[{"internalType":"contract IBondController","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"issuedCount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"lastIssueWindowTimestamp","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"maxMaturityDuration","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"minIssueTimeIntervalSec","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"trancheRatios","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"minIssueTimeIntervalSec_","type":"uint256"},{"internalType":"uint256","name":"issueWindowOffsetSec_","type":"uint256"}],"name":"updateIssuanceTimingConfig","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"maxMaturityDuration_","type":"uint256"}],"name":"updateMaxMaturityDuration","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256[]","name":"trancheRatios_","type":"uint256[]"}],"name":"updateTrancheRatios","outputs":[],"stateMutability":"nonpayable","type":"function"}]

60c060405234801561001057600080fd5b50604051610d62380380610d6283398101604081905261002f9161005e565b6001600160a01b039182166080521660a052610098565b6001600160a01b038116811461005b57600080fd5b50565b6000806040838503121561007157600080fd5b825161007c81610046565b602084015190925061008d81610046565b809150509250929050565b60805160a051610c976100cb6000396000818161022701526104a201526000818161017701526104730152610c976000f3fe608060405234801561001057600080fd5b50600436106101215760003560e01c80638da5cb5b116100ad578063d97bef3411610071578063d97bef3414610249578063e1b43ba21461025c578063f2fde38b14610265578063fb425cc714610278578063ffdae9f81461028b57600080fd5b80638da5cb5b146101f8578063d383f64614610209578063d3cf9e3014610211578063d5eb27a11461021a578063d8dfeb451461022257600080fd5b8063576e4151116100f4578063576e4151146101725780636b44e6be146101b1578063715018a6146101d4578063748fff83146101dc5780637c46dc2b146101ef57600080fd5b80630b0f774314610126578063107e12d61461014157806319e1d5d61461014a5780633b35897a1461015f575b600080fd5b61012e61029e565b6040519081526020015b60405180910390f35b61012e60655481565b61015d610158366004610950565b6102af565b005b61015d61016d366004610a1a565b6102bc565b6101997f000000000000000000000000000000000000000000000000000000000000000081565b6040516001600160a01b039091168152602001610138565b6101c46101bf366004610a86565b6103f2565b6040519015158152602001610138565b61015d610405565b61015d6101ea366004610aa3565b610419565b61012e606b5481565b6033546001600160a01b0316610199565b61015d61042c565b61012e60685481565b610199610581565b6101997f000000000000000000000000000000000000000000000000000000000000000081565b610199610257366004610950565b6105ac565b61012e60675481565b61015d610273366004610a86565b6105b9565b61012e610286366004610950565b610632565b61015d610299366004610ac5565b610653565b60006102aa606961071c565b905090565b6102b7610726565b606555565b600054610100900460ff16158080156102dc5750600054600160ff909116105b806102f65750303b1580156102f6575060005460ff166001145b61035e5760405162461bcd60e51b815260206004820152602e60248201527f496e697469616c697a61626c653a20636f6e747261637420697320616c72656160448201526d191e481a5b9a5d1a585b1a5e995960921b60648201526084015b60405180910390fd5b6000805460ff191660011790558015610381576000805461ff0019166101001790555b610389610780565b610392856102af565b61039b84610653565b6103a58383610419565b80156103eb576000805461ff0019169055604051600181527f7f26b83ff96e1f2b6a682f133852f6798a09c465da95921460cefb38474024989060200160405180910390a15b5050505050565b60006103ff6069836107af565b92915050565b61040d610726565b61041760006107d4565b565b610421610726565b606791909155606855565b606754606b5461043c9190610b18565b42101561044557565b6068546067546104559042610b2b565b61045f9042610b4d565b6104699190610b18565b606b8190555060007f00000000000000000000000000000000000000000000000000000000000000006001600160a01b031663c7bfded57f00000000000000000000000000000000000000000000000000000000000000006066606554606b546104d39190610b18565b6040518463ffffffff1660e01b81526004016104f193929190610b60565b6020604051808303816000875af1158015610510573d6000803e3d6000fd5b505050506040513d601f19601f820116820180604052508101906105349190610bc4565b9050610541606982610826565b506040516001600160a01b03821681527f83425b315fe57ede6e65954ac7ec63b2699040570de3470442b54866a4a4c41d9060200160405180910390a150565b600061058b61042c565b6102aa600161059a606961071c565b6105a49190610b4d565b60699061083b565b60006103ff60698361083b565b6105c1610726565b6001600160a01b0381166106265760405162461bcd60e51b815260206004820152602660248201527f4f776e61626c653a206e6577206f776e657220697320746865207a65726f206160448201526564647265737360d01b6064820152608401610355565b61062f816107d4565b50565b6066818154811061064257600080fd5b600091825260209091200154905081565b61065b610726565b805161066e9060669060208401906108f0565b506000805b82518160ff1610156106bb57828160ff168151811061069457610694610be1565b6020026020010151826106a79190610b18565b9150806106b381610bf7565b915050610673565b506103e881146107185760405162461bcd60e51b815260206004820152602260248201527f426f6e644973737565723a20496e76616c6964207472616e63686520726174696044820152616f7360f01b6064820152608401610355565b5050565b60006103ff825490565b6033546001600160a01b031633146104175760405162461bcd60e51b815260206004820181905260248201527f4f776e61626c653a2063616c6c6572206973206e6f7420746865206f776e65726044820152606401610355565b600054610100900460ff166107a75760405162461bcd60e51b815260040161035590610c16565b610417610847565b6001600160a01b038116600090815260018301602052604081205415155b9392505050565b603380546001600160a01b038381166001600160a01b0319831681179093556040519116919082907f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e090600090a35050565b60006107cd836001600160a01b038416610877565b60006107cd83836108c6565b600054610100900460ff1661086e5760405162461bcd60e51b815260040161035590610c16565b610417336107d4565b60008181526001830160205260408120546108be575081546001818101845560008481526020808220909301849055845484825282860190935260409020919091556103ff565b5060006103ff565b60008260000182815481106108dd576108dd610be1565b9060005260206000200154905092915050565b82805482825590600052602060002090810192821561092b579160200282015b8281111561092b578251825591602001919060010190610910565b5061093792915061093b565b5090565b5b80821115610937576000815560010161093c565b60006020828403121561096257600080fd5b5035919050565b634e487b7160e01b600052604160045260246000fd5b600082601f83011261099057600080fd5b8135602067ffffffffffffffff808311156109ad576109ad610969565b8260051b604051601f19603f830116810181811084821117156109d2576109d2610969565b6040529384528581018301938381019250878511156109f057600080fd5b83870191505b84821015610a0f578135835291830191908301906109f6565b979650505050505050565b60008060008060808587031215610a3057600080fd5b84359350602085013567ffffffffffffffff811115610a4e57600080fd5b610a5a8782880161097f565b949794965050505060408301359260600135919050565b6001600160a01b038116811461062f57600080fd5b600060208284031215610a9857600080fd5b81356107cd81610a71565b60008060408385031215610ab657600080fd5b50508035926020909101359150565b600060208284031215610ad757600080fd5b813567ffffffffffffffff811115610aee57600080fd5b610afa8482850161097f565b949350505050565b634e487b7160e01b600052601160045260246000fd5b808201808211156103ff576103ff610b02565b600082610b4857634e487b7160e01b600052601260045260246000fd5b500690565b818103818111156103ff576103ff610b02565b6001600160a01b0384168152606060208083018290528454918301829052600085815281812090929091906080850190845b81811015610bae57845483526001948501949284019201610b92565b5050809350505050826040830152949350505050565b600060208284031215610bd657600080fd5b81516107cd81610a71565b634e487b7160e01b600052603260045260246000fd5b600060ff821660ff8103610c0d57610c0d610b02565b60010192915050565b6020808252602b908201527f496e697469616c697a61626c653a20636f6e7472616374206973206e6f74206960408201526a6e697469616c697a696e6760a81b60608201526080019056fea2646970667358221220a83918183008c8d677ef7b4ef8cfce422986c3aeeb4f443cf911a5a9251c3f0464736f6c6343000811003300000000000000000000000072799ffd1f4ccf92ea2b1ee0cada16a5461c4d96000000000000000000000000d46ba6d942050d489dbd938a2c909a5d5039a161

0x608060405234801561001057600080fd5b50600436106101215760003560e01c80638da5cb5b116100ad578063d97bef3411610071578063d97bef3414610249578063e1b43ba21461025c578063f2fde38b14610265578063fb425cc714610278578063ffdae9f81461028b57600080fd5b80638da5cb5b146101f8578063d383f64614610209578063d3cf9e3014610211578063d5eb27a11461021a578063d8dfeb451461022257600080fd5b8063576e4151116100f4578063576e4151146101725780636b44e6be146101b1578063715018a6146101d4578063748fff83146101dc5780637c46dc2b146101ef57600080fd5b80630b0f774314610126578063107e12d61461014157806319e1d5d61461014a5780633b35897a1461015f575b600080fd5b61012e61029e565b6040519081526020015b60405180910390f35b61012e60655481565b61015d610158366004610950565b6102af565b005b61015d61016d366004610a1a565b6102bc565b6101997f00000000000000000000000072799ffd1f4ccf92ea2b1ee0cada16a5461c4d9681565b6040516001600160a01b039091168152602001610138565b6101c46101bf366004610a86565b6103f2565b6040519015158152602001610138565b61015d610405565b61015d6101ea366004610aa3565b610419565b61012e606b5481565b6033546001600160a01b0316610199565b61015d61042c565b61012e60685481565b610199610581565b6101997f000000000000000000000000d46ba6d942050d489dbd938a2c909a5d5039a16181565b610199610257366004610950565b6105ac565b61012e60675481565b61015d610273366004610a86565b6105b9565b61012e610286366004610950565b610632565b61015d610299366004610ac5565b610653565b60006102aa606961071c565b905090565b6102b7610726565b606555565b600054610100900460ff16158080156102dc5750600054600160ff909116105b806102f65750303b1580156102f6575060005460ff166001145b61035e5760405162461bcd60e51b815260206004820152602e60248201527f496e697469616c697a61626c653a20636f6e747261637420697320616c72656160448201526d191e481a5b9a5d1a585b1a5e995960921b60648201526084015b60405180910390fd5b6000805460ff191660011790558015610381576000805461ff0019166101001790555b610389610780565b610392856102af565b61039b84610653565b6103a58383610419565b80156103eb576000805461ff0019169055604051600181527f7f26b83ff96e1f2b6a682f133852f6798a09c465da95921460cefb38474024989060200160405180910390a15b5050505050565b60006103ff6069836107af565b92915050565b61040d610726565b61041760006107d4565b565b610421610726565b606791909155606855565b606754606b5461043c9190610b18565b42101561044557565b6068546067546104559042610b2b565b61045f9042610b4d565b6104699190610b18565b606b8190555060007f00000000000000000000000072799ffd1f4ccf92ea2b1ee0cada16a5461c4d966001600160a01b031663c7bfded57f000000000000000000000000d46ba6d942050d489dbd938a2c909a5d5039a1616066606554606b546104d39190610b18565b6040518463ffffffff1660e01b81526004016104f193929190610b60565b6020604051808303816000875af1158015610510573d6000803e3d6000fd5b505050506040513d601f19601f820116820180604052508101906105349190610bc4565b9050610541606982610826565b506040516001600160a01b03821681527f83425b315fe57ede6e65954ac7ec63b2699040570de3470442b54866a4a4c41d9060200160405180910390a150565b600061058b61042c565b6102aa600161059a606961071c565b6105a49190610b4d565b60699061083b565b60006103ff60698361083b565b6105c1610726565b6001600160a01b0381166106265760405162461bcd60e51b815260206004820152602660248201527f4f776e61626c653a206e6577206f776e657220697320746865207a65726f206160448201526564647265737360d01b6064820152608401610355565b61062f816107d4565b50565b6066818154811061064257600080fd5b600091825260209091200154905081565b61065b610726565b805161066e9060669060208401906108f0565b506000805b82518160ff1610156106bb57828160ff168151811061069457610694610be1565b6020026020010151826106a79190610b18565b9150806106b381610bf7565b915050610673565b506103e881146107185760405162461bcd60e51b815260206004820152602260248201527f426f6e644973737565723a20496e76616c6964207472616e63686520726174696044820152616f7360f01b6064820152608401610355565b5050565b60006103ff825490565b6033546001600160a01b031633146104175760405162461bcd60e51b815260206004820181905260248201527f4f776e61626c653a2063616c6c6572206973206e6f7420746865206f776e65726044820152606401610355565b600054610100900460ff166107a75760405162461bcd60e51b815260040161035590610c16565b610417610847565b6001600160a01b038116600090815260018301602052604081205415155b9392505050565b603380546001600160a01b038381166001600160a01b0319831681179093556040519116919082907f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e090600090a35050565b60006107cd836001600160a01b038416610877565b60006107cd83836108c6565b600054610100900460ff1661086e5760405162461bcd60e51b815260040161035590610c16565b610417336107d4565b60008181526001830160205260408120546108be575081546001818101845560008481526020808220909301849055845484825282860190935260409020919091556103ff565b5060006103ff565b60008260000182815481106108dd576108dd610be1565b9060005260206000200154905092915050565b82805482825590600052602060002090810192821561092b579160200282015b8281111561092b578251825591602001919060010190610910565b5061093792915061093b565b5090565b5b80821115610937576000815560010161093c565b60006020828403121561096257600080fd5b5035919050565b634e487b7160e01b600052604160045260246000fd5b600082601f83011261099057600080fd5b8135602067ffffffffffffffff808311156109ad576109ad610969565b8260051b604051601f19603f830116810181811084821117156109d2576109d2610969565b6040529384528581018301938381019250878511156109f057600080fd5b83870191505b84821015610a0f578135835291830191908301906109f6565b979650505050505050565b60008060008060808587031215610a3057600080fd5b84359350602085013567ffffffffffffffff811115610a4e57600080fd5b610a5a8782880161097f565b949794965050505060408301359260600135919050565b6001600160a01b038116811461062f57600080fd5b600060208284031215610a9857600080fd5b81356107cd81610a71565b60008060408385031215610ab657600080fd5b50508035926020909101359150565b600060208284031215610ad757600080fd5b813567ffffffffffffffff811115610aee57600080fd5b610afa8482850161097f565b949350505050565b634e487b7160e01b600052601160045260246000fd5b808201808211156103ff576103ff610b02565b600082610b4857634e487b7160e01b600052601260045260246000fd5b500690565b818103818111156103ff576103ff610b02565b6001600160a01b0384168152606060208083018290528454918301829052600085815281812090929091906080850190845b81811015610bae57845483526001948501949284019201610b92565b5050809350505050826040830152949350505050565b600060208284031215610bd657600080fd5b81516107cd81610a71565b634e487b7160e01b600052603260045260246000fd5b600060ff821660ff8103610c0d57610c0d610b02565b60010192915050565b6020808252602b908201527f496e697469616c697a61626c653a20636f6e7472616374206973206e6f74206960408201526a6e697469616c697a696e6760a81b60608201526080019056fea2646970667358221220a83918183008c8d677ef7b4ef8cfce422986c3aeeb4f443cf911a5a9251c3f0464736f6c63430008110033

00000000000000000000000072799ffd1f4ccf92ea2b1ee0cada16a5461c4d96000000000000000000000000d46ba6d942050d489dbd938a2c909a5d5039a161

-----Decoded View---------------
Arg [0] : bondFactory_ (address): 0x72799FFD1F4CCF92eA2b1eE0CADa16a5461c4d96
Arg [1] : collateral_ (address): 0xD46bA6D942050d489DBd938a2C909A5d5039A161

-----Encoded View---------------
2 Constructor Arguments found :
Arg [0] : 00000000000000000000000072799ffd1f4ccf92ea2b1ee0cada16a5461c4d96
Arg [1] : 000000000000000000000000d46ba6d942050d489dbd938a2c909a5d5039a161